Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
rob_milton said:
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
Click to expand...
Click to collapse
Hey Since you're new I'll provide a link. It should be located somwhere on this page in this thread. BT Voice Command something or other
http://forum.xda-developers.com/showthread.php?t=283412&page=32
Give a man a fish and he eats for a day. BUT!!! Give a man a fishing pole and he eats for the rest of his life.
Check out this wiki. You can find just about everything you are looking for here.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
When you get everything all hooked up join us in the Jawbone thread. I'd like to hear your experience with it. I'm gonna test mine today with the sunroof back and drivers window down doin 80+...see if they can hear me now!
X
p.s. IF you have issues getting it to work there are some great tips in that entire thread. It's great reading...especially when you get it to work in the end. BOO YA!
Xultar,
Thank you for the response...
I am finding it interesting to read through all the information on this site. I had already spent a lot of time in the WIKI that you referenced.
I guess I'm just dense, but I still can't find the file 0.9f (.cab ?). The thread you referenced says download it. But it doesn't say where? I can't seem to find it anywhere on this site or by Googling...
Can you point me in the right direction?
Thanks,
Rob
Ok... I finally found the 0.9f cab...
The instructions say to 'run' it. I don't know how to 'run' the cab file?? I unzipped the zip file I downloaded. What do I do with the cab file?
Thanks,
Rob
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
rob_milton said:
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
Click to expand...
Click to collapse
There should be an icon in your program menu for BT Voice command config
enable it I sent my VC duration to 20. In the bottom left corner it should say version 0.0f
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
rob_milton said:
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
Click to expand...
Click to collapse
Actually no headset can handle wind noise very well.
About MS VC 16 and 0.9f...A hard reset may be necessary but if you want it to work...and it does a hard reset is worth it. For what it is worth 0.9f works in general with all BT headsets.
Good luck
X
I can say that it works great with the SE DS970
Related
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Hi
I downloaded from HTC website the hotfix for bluetooth
Kai06492.CAB I installed the file and deleted the cab file now I have an icon showing the hotfix as a program!!
I have deleted the cab and soft reset my phone and i still have the icon on my program files.
does anybody has the same problem? how can I delete it from my programs
Thanxs
the icon in the programs menu is just a shortcut (in /windows/start menu/programs/) im sure you can just delete the shortcut and have it gone from the menu
defaultdotxbe said:
the icon in the programs menu is just a shortcut (in /windows/start menu/programs/) im sure you can just delete the shortcut and have it gone from the menu
Click to expand...
Click to collapse
Thank you very much!
I haven't heard of such a fix before. Does it work? I went to the HTC site and could not find it. I searched this whole site and could not find it. Does anyone have a copy please.
AGY said:
Hi
I downloaded from HTC website the hotfix for bluetooth
Kai06492.CAB I installed the file and deleted the cab file now I have an icon showing the hotfix as a program!!
I have deleted the cab and soft reset my phone and i still have the icon on my program files.
does anybody has the same problem? how can I delete it from my programs
Thanxs
Click to expand...
Click to collapse
From the name of the CAB and from this post, http://forum.xda-developers.com/showthread.php?p=1750060 it appears that this is for the Kaiser. Can anyone confirm that this works for the Titan/Mogul? If so, this might be the Holy Grail to get Bluetooth working on my PPC-6800.
Has anyone tried this, and can confirm or deny if this fixes any Bluetooth issues on their Titan/Mogul?
what bluetooth issues are we talking about now (since 2.17 came out, my BT has been perfect)?
Dishe said:
what bluetooth issues are we talking about now (since 2.17 came out, my BT has been perfect)?
Click to expand...
Click to collapse
I haven't had my Mogul that long, but with the DCD 1.6.10 kitchen and either my Blueant Z9 or my Plantronics 510, I sometimes lose my BT connection if I have my headset in my right ear and the phone on my left hip or even in my left inside jacket pocket.
With MSVC 1.6, about half the time I get asked to repeat my command, but it never accepts the repeated command. I think this is the same problem as VC confirmation, which is known not to work on the Mogul.
When VC does understand my command, it takes 5-10 seconds before it repeats it back and acts on it, and most times the voice is very low volume and scratchy.
To JimSmith94,
FYI...
Bluetooth radio waves do not travel through water and since the human body comprises of 70% water, you may lose signal if your BT headset and phone are located on opposing sides of your body.
I wear mine on the same side and never lose BT signal...
xweaponx said:
To JimSmith94,
FYI...
Bluetooth radio waves do not travel through water and since the human body comprises of 70% water, you may lose signal if your BT headset and phone are located on opposing sides of your body.
I wear mine on the same side and never lose BT signal...
Click to expand...
Click to collapse
Yes, I am aware of how Bluetooth works. The point I was trying to make, but apparently didn't, is that I had none of these issues with MSVC 1.6 and my PPC-6700. It seems that Bluetooth in general and MSVC specifically don't work nearly as well on my Mogul as they did on my Apache.
If no one else has these issues with the Mogul, could this be a kitchen issue, or a hardware problem that I need to talk to Sprint about, and see about swapping out my phone?
JimSmith94 said:
Yes, I am aware of how Bluetooth works. The point I was trying to make, but apparently didn't, is that I had none of these issues with MSVC 1.6 and my PPC-6700. It seems that Bluetooth in general and MSVC specifically don't work nearly as well on my Mogul as they did on my Apache.
If no one else has these issues with the Mogul, could this be a kitchen issue, or a hardware problem that I need to talk to Sprint about, and see about swapping out my phone?
Click to expand...
Click to collapse
The BT drivers on the titan do not work as it should and M$VC 1.6 does not work with WM6 as it should either, if you search around you will find this to be true from day one.
With this new rom I can now enable conformation when using MS voice command 1.6. Before i would have to disable conformation in order to use bluetooth with MS voice command, this is no longer a problem; can any one else confirm this?
Wow, I so have to check this out.
No lie! ha ha ha it works! saweet!
well, now caller id and messages arent sent through
there is a reg tweak which will let the caller id come through the bt headset,
sorry but not sure where it is.
Notification
I set the notification options to "Announce notifications using bluetooth hands free if available" and it works. When the phone rings I hear the ringing and the announcement through the headset. I did not do any registry changes as I used to do before this ROM. I am using a Jabra 8010.
I'm more excited about the confirmations working on 3.16 than even GPS and EVDO-A. I don't keep my headset in my ear very much, so I haven't even checked to see if notifications work through the headset.
JimSmith94 said:
I'm more excited about the confirmations working on 3.16 than even GPS and EVDO-A. I don't keep my headset in my ear very much, so I haven't even checked to see if notifications work through the headset.
Click to expand...
Click to collapse
I can also confirm that this problem is fixed. I took the plunge with the pre-release ROM and it's been working like a charm. I have not had to modify the registry to get notifications to work, either. I just went to Settings->Voice Command and setup my preferences.
I also have to agree that the Bluetooth fix is more exciting to me than the GPS stuff since I use this feature way more than I use GPS.
where can I get this fix?
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
mtnTOUCH said:
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
Click to expand...
Click to collapse
touch forum? lol. we have a newer radio rom and bt drivers witch fixed the issue, so wait for someone to port them over. Sorry man.
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
taxilian said:
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
Click to expand...
Click to collapse
Did you assign Voice Command to Button 5? (Start > Settings > Buttons). I have Button 5 set to Voice Command, and Button 5 (Press & Hold) set to Record.
mtnTOUCH said:
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
Click to expand...
Click to collapse
This worked for me on my wizard and Hermes
taxilian said:
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
Click to expand...
Click to collapse
i have the same problem. after a hard reset and then installing ONLY voice command, it works PERFECTLY - announcements, confirmations, everything. after a soft reset something gets changed in the registry and it no longer is activated from the headset.
is there a program that can tell you what has been changed in a registry?
its frustrating that is working PERFECTLY and only upon a soft reset does it not work anymore...
ok... still trying to isolate what the problem is.
here are the symptoms. as before, everything works GREAT until i soft reset.
then, rather than the headset triggering the voice command, it opens the dialer app and hangs open. i have to uncheck the object in bluetooth settings, save, then recheck to reset headset.
i am trying some more stuff...
i found a PITA fix. apparently whatever happens after a soft reset messes up the bluetooth files. so i uninstall, soft reset, then reinstall.
sad thing is - i'd rather do this than keep trying to figure out what is causing this conflict...
1.6 Voice Command; announcements not coming over incoming calls
I have a ppc-6800 sprint mogul.
I have WM6 Professional
CE OS 5.2.1238 (Build 17745.0.2.3)
My issue is that when I installed VC 1.6, everything works fine, except I don't get the incoming call or calendar announcements. I have checked the appropriate boxes in the VC options settings to no avail.
I am certainly no xda-developer, and can become easily confused when talking about registry edits and .dll files. If anyone can provide explicit directions on how to fix, I would truly appreciate.
JFA
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
I use BatteryStatus, It can place a (bluetooth, wifi) shortcut on today....
Have a look also to Ilauncher....
With that you can have what ever icon you want on your today....
So bluetooth, wifi, shortcuts to other program ecc.....
You can also edit the icon with your own...
That is a very nice app...
Thanks for the reply but what I am actually looking for is similar to jetware which adds extra profiles to the bluetooth stack not icons, it helps with devices or bluetooth car kits that can read sms etc
Battery status does not actually add anything or extend the bluetooth stack.
I wonder if we can contact the author of the jetware extension to release the source code. He's obviously not doing anything with it anymore.
Top! UP! UP!
Yep UP! i'm also looking for a way of extending the BT stacks functionallity without having to replace the stack itself. Perhaps we really should try to contact the author of jetware
No other app in this world to function like Jetware extension?
Woody_XDA said:
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
Click to expand...
Click to collapse
may i ask why are you looking for a similar one and not use this one?
i am asking 'cose i found myself long time ago that is causing some problems
with the BT communication....do you have the same problems?
In my case there are some minor problems with BT connection and it also does not deliver entire functionallity that i require - like PBAP and other stuff
Same here. It's not finished and the developer just kinda dissapeared two years ago. Sooo we're looking for someone to take over. Someone please take over on this! There could be a lot of money involved. I would pay up to $100 to get this done!
I'm on the case
Also, what is PBAP?
Ok I think I've found everything I need to get started on this. Since I don't have a device to test this with, I need to know what feature you think would be easiest to implement or what feature you want the most. ie: List contacts, list messages, etc.
This way, I can focus on implementing this one thing, and once it's working i'll know i'm on the right track and can move on from there.
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
i'm gonna go try this on my pioneer bluetooth
*update* pocket bluetooth works perfect with my pioneer in-car bt unit.
HI guys
Just wondering does Jetware 1.31 work well enough with car kits? I tried my Polaris with the Alpine KCE-350BT and it doesn't work so am about to test it using Jetware. Just wanted to know do you need to run Jetware each time or just for the initial phone book upload? Once the contacts are uploaded i think it should work properly without running Jetware correct?
Just can't really place anything on the today screen or a shortcut, so interested to hear if there is anything else better.
thanks,
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
this didn't seem to work on my HTC TC.
Anyone else close to a working alternative? I really need something to replace OBEX and use the PBAP format to upload contacts to Alpine car kit.
Are there any registry fixes or does WM6.1 get around the problem as claimed by MS.
Cheers,
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
KeithXP said:
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
Click to expand...
Click to collapse
How do you go about disabling synchro phone profile - is it the same with touch cruise?
I never really 'got' Jetware. Do you just need to send contacts once to the car kit? Also i assume you are meant to toggle bluetooth on/off using the Jetware shortcuts, not the normal bluetooth??
Thanks- i'm going to go bakc to the shop and test it now i've got a 6.1 Rom on, as the OBEX was a problem so perhaps with this turned off in adv. config. it may work (fingers crossed).
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts. The huge plus is that if you use automatic synch, you will get duplicate entries for every phone number held for a given contact. If you use the Jetware Extension to send contacts, you get one entry per contact, with all the numbers correctly identified as mobile, home, work.
Then when you dial, you say the contact name, then 'home' or 'work' etc. If you use voice dialling this is essential, otherwise you have to record every number individually (voice tag "John Doe home", "John Doe work" instead of one tag "John", then "mobile" or "home" when prompted for number type).
I hope that makes sense, but since your message is two weeks old (sorry, haven't been here for a while) you may have it figured out.
AFter all that, it seems the developers at Jetware have given up. They don't respond to email and the link to purchase the software is broken/dead. That's a bummer as I have lost my activation code and just got a new phone....
KeithXP said:
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts.
Click to expand...
Click to collapse
Thanks for the reply - I have never seen this option of 'disable synchro' anywhere on the phone, jetware options or on the car kit interface.
It seems to be working well enough now, but the phone book did get corrupted and couldn't fix it till i paired another phone then mine again. (contacts were mixed up - some first name last name, and didn't show /H or /M for home or mobile etc but seem ok now).
Part of it could be having to be patient with the Alpine BT kit, as it takes a while 'updating' on pairing to copy all the info again. Still doesn't work as fast or as reliably as i'd hoped, but probably good enough. May not have this phone forever, but don't want to get another one yet.
It's a shame they aren't supporting their product any more. Hopefully someone else could improve it or write something better, as the one annoying thing now is that i can't put the phone into sleep mode when i press the button - keeps powering back on to full lit screen, every few mins which wastes the battery as well as distracting when the phone is in the car mount- now i just have to lock the device as a workaround.
Hi @ all,
since a few days i am a proudly HTC Hero owner. Its quite an amazing phone with many features and a steady growing Market.
At the weekend i tried to couple my Hero with my bluetooth handsfree set installed in my car. But what i recognized wasn't so much pleasing: The Hero didn't display the handsfree set in the list of available bluetooth devices.
Before i got the Hero i had a HTC TyTN II aka Kaiser and it worked well with the handsfree set.
Perhaps anybody else have some similar trouble or experience with this and maybe a solution, fortunately. It would be great to keep usage of my handsfree set furthermore.
Thank you and best regards
On handsfree there are some buttons right ? You need to press them in a combination so the handsfree can be detected by your Hero. Just search on the handsfree guide or internet. I cannot help you because I don't have it and don't know the button combination. When you find it go to settings and turn on Bluetooth on your phone. Just search it and connect to it
Hi omokas,
yes, you are right.. but i've done this.
The users guide says you have to press the main button for 1 second. After that you will get a feedback sound and the led gets flashing... so far so good.. everything is fine but the Hero doesn't recognize.
Hopefully there are no different bluetooth protocols or whatever the devices can't communicate.
Have you tried an application from Market ? It may to the job
But if not then your handsfree must be an older version that your Hero can't recognise. Before buying a new one make sure your phone works with other handsfrees.
Have you tried an application from Market ? It may to the job
Click to expand...
Click to collapse
No, i haven't tried yet. Can you recommend one?
At the moment i'm not able to try an other handsfree. But i've just seen the handsfree is able to store seven pairings... maybe there is the problem.
So i'm going to delete all pairings and give a next try.
Thanks
Yes try that. You could try the application "Bluetooth+Headphones".
Sorry if I am not able to help further but I don't use handsfree because I am 13 and I don't know how to drive.
No Problem... I am appreciate for any Help!
Did you get any results yet? E.g. did the removal of the other pairings work? Or the app from the market?
I'm quite interested in this since I'm still looking into getting the CK-100 build in my car
I am planning on getting that carkit wired up outside of the car, so I can at least give it a try and see if it wants to work. But don't have that much time to give it a try yet, end of next week perhaps...
I have a CK-7W and it works with my Hero (official orange ROM).
It was a bit of a nightmare to get paired in the 1st place, the hero failed to find it but I kept trying and it eventually found it. I think I might have reset the hands free though (pull the power for a few minutes).
The device usually pairs pretty fast, sometimes it takes a min or two but not often.
My only gripes are :
1: some times it doesn't send the audio to the speaker keeping it on phone requiring you to use a menu option to do so.
2: The ring tone isn't the one set on the phone but a generic ringer.
3: Occasionally the phone doesn't disconnect properly when the other end hangs up requiring you to do so manually.
I have a CK-15W car kit
and its fully supported
it even downloads the phonebook very well
ck7w and hero
My hero worked first time! To pair you need to leave ignition off and hold the button in until it beeps, not just a short push as that just turns the car kit on. Once its beeped search for it and then pair using code. As yet I have had none of the problems mentioned here. I hope this helps
I have the same phone (Android 1.5 stock ROM) and the same Nokia CK-7W handsfree set.
For me this works fine. Didn't have to press the button on the handsfree set. Just searched for BT devices and paired.