Please share Cingular 3125/Startrek unlocker - HTC Startrek

Anyone has the free unlocker for the 3125 yet? Can you share it?
This has taken pretty long.
Thanks
Trini

You have to pay to get the phone carrier unlocked as there isn't a solution at the moment similar to the one created for the HTC Wizard...
http://www.imei-check.co.uk/f600unlock.php
Application unlocking so you can flash the ROM has been covered a couple of times (see response #2)
http://forum.xda-developers.com/showthread.php?t=292936
Good luck

you don't have to pay to cid unlock the phone... search this forum, or spv-dev's forum....
it's easy,
but, so you know, the files will be extracted to the folder specified in the cmd window (not necessarily the same folder were the itsmeutils are)
sim unlock is around too, but i don't have another sim to test it with

I have done cid unlock and it works fine. But, the phone is still sim locked.

Related

How to sim unlock G4 model

Hi all,
I am new on this forum an read a lot so far but it is not clear to me anymore. What i want to do is only a sim unlock action on my G4 model. Can i use the same tools that are mentioned for the G3 models. Please advise
robpoc said:
Hi all,
I am new on this forum an read a lot so far but it is not clear to me anymore. What i want to do is only a sim unlock action on my G4 model. Can i use the same tools that are mentioned for the G3 models. Please advise
Click to expand...
Click to collapse
There's only one way to do an actual CID unlock on a G4, and that's to pay these guys to do it for you http://www.imei-check.co.uk. But, if you just want to flash various ROMS on it, then you don't need to unlock it. Just check out the first thread in this forum and the wiki.
TaurusBullba said:
There's only one way to do an actual CID unlock on a G4, and that's to pay these guys to do it for you http://www.imei-check.co.uk. But, if you just want to flash various ROMS on it, then you don't need to unlock it. Just check out the first thread in this forum and the wiki.
Click to expand...
Click to collapse
I understand that there is not a free way to CID unlock a G4 device, but the question is, is there a way to just SIM Unlock it so you can use it with a different carrier? I understood CID unlock and SIM unlock is not the same.
Pipila said:
I understand that there is not a free way to CID unlock a G4 device, but the question is, is there a way to just SIM Unlock it so you can use it with a different carrier? I understood CID unlock and SIM unlock is not the same.
Click to expand...
Click to collapse
That's right, CID and SIM unlocking are different. If you want to SIM unlock your phone, the only option is to pay that same company I mentioned. There is no free way to SIM unlock your phone still.
robpoc said:
What i want to do is only a sim unlock action on my G4 model. Can i use the same tools that are mentioned for the G3 models. Please advise
Click to expand...
Click to collapse
Yes, the lokiwiz program worked for me to SIM unlock my 8125 G4. I can't remember the details-- I vaguely recall that version 02b worked better than the 03 version. But yes, it works for SIM unlocking a G4.
neurocutie said:
Yes, the lokiwiz program worked for me to SIM unlock my 8125 G4. I can't remember the details-- I vaguely recall that version 02b worked better than the 03 version. But yes, it works for SIM unlocking a G4.
Click to expand...
Click to collapse
Just be sure NOT to flash the button rom or any other "FULL" rom that contains IPL/SPL or you will ruin your device. It is not advisable to follow G3 instructions for your G4 device for this reason.
But, then again I am sure you already knew this because you read the wiki and the stickies right
Sim Unlocking a G4 8125
No disrespect to any of the developers here who have done shiploads of brilliant work to unlock the 8125's et al. Sadly though when reading you have to take a geat deal of care and read a lot of stuff to try to figure out what to really do because it would seem there is loads of half truth and uninformed comment being passed off as fact.
Having read 100's of posts here I launched into the SIM unlocking process and found that on my G4 8125 Phone that Lokiwiz version 0.2 threw errors and did not seem to successfully SIM unlock the phone.
So I moved up to LokiWiz 0.3a which contains LokiWizMSL.exe 845,932 Bytes. This package on my G4 Cingular 8125 running 2.25.0001 IPL and SPL, OS 2.25.11.1 and successfully unlocked the phone. When you run Lokiwiz look for the lines:
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0100000000000000
SIMLock Code: 926***** <==== 8 Digit number
Write down the SimLock Code you need this number.
The one confusing thing is that is now totally obvious is that after you run Lokiwiz you need to swap to a SIM card from another provider to enter the code when the phone reboots, in my case I borrowed a workmates U.S. TMobile SIM Card and when the phone booted up it asked for the code that I generated above. Once that is entered your G4 phone is SIM Unlocked.
This part ain't that hard it is nerve wracking for us noobs tho.
Huge thanks to everyone whose work contributed to these tools, next chance I get I have you nominated for God.
Now I'm on to CID unlocking my phone to get WM6 and Touchflo on it. I suspect several more days reading will be required.
Phil
Unlocked Cingular 8125 G4
Thanks for the guidance.
Just installed Lokiwiz03a, ran the batch file, swapped cards, and put in the new code. Everything worked perfectly.
Thank you everyone for the software and tutorials.
YES lokiwiz03a worked flawlessly for my wizard G4 too, Now i have sim unlocked my phone, is CID unlocking same as making the device Super CID?
Easier Than Cutting Warm Butter
actually it is so simple and by the way : HERE IS A HINT:
I DID INSTALL THE ENABLERAPID.CAB AND CERT_SPCS.CAB LOCATED IN THE UTILS INFO.. AFTER I SWICHED THE SIM CARD REBOOT THE PHONE AND RUN THE lokiwiz03a.exe IT GAVE ME THE CODE.. I DIDNT HAD TO SWAP SIMS.. AND WOALA....
IT WORKS EASIER THAN MOST EXPECTED THINGS...
STOP PAYING $40 DOLARS TO UNLOCK THIS THINGS.. THESE IS A VERY NOOB GUIDE..
I AM ATTACHING THE RAPID.CAB
NOW I AM INTO MAKING MY CINGULAR 8125 WM6..
ANYSUGGESTIONS
Congratulations Phil!, I hope you find the way to CID-Unlock ours Cingular 8125.
I'll be readingo this post for future results.
TaurusBullba said:
There's only one way to do an actual CID unlock on a G4, and that's to pay these guys to do it for you http://www.imei-check.co.uk. But, if you just want to flash various ROMS on it, then you don't need to unlock it. Just check out the first thread in this forum and the wiki.
Click to expand...
Click to collapse
Does anyone know if there has been any new developments on a free method of CID unlocking a G4?
I have tried the methid mentioned earlier, I get my 9 digit number, swap the sim to a locked network, enter the 9 digit number when asked, and it seems to unlock the phone, but as soon as it tried to register on the network I am presented with the network is locked screen again.....Unless I turn the phone to flight mode and then of course it all works fine (except the phone ) any ideas why this might be?
Syngress
This works
I would like to just say how grateful i am to everyone working so hard to make all our G4 wizard users' lifes a little easier. THANKS AGAIN.
Im wondering what I need to do to get the TouchFlo on my G4 Wizard without risking bricking it (i have enough horror stories to not want this to happen). So anyone with advice id very much appreciate it or links on where i can download it.
Thanks
..
Newby
Today, I used Lokiwiz 03a. I ran it and it unlocked my Cingular G4 8125. I am now using it on T-Mobile. I works. Plain and simple.
kregar
is anyone from xda-dev working on G4 simlock unlocking?
Is there any BOX ( I saw service boxes for smartphones like JAFWM, it says it can also unlock wizard but I don't know if this info is about G4 wizard)?
I know about IMEI-CHECK. Now I just can't pay for it. I live outside of GB.
Polish PAYPAL really sucks
kubek1334 said:
is anyone from xda-dev working on G4 simlock unlocking?
Is there any BOX ( I saw service boxes for smartphones like JAFWM, it says it can also unlock wizard but I don't know if this info is about G4 wizard)?
I know about IMEI-CHECK. Now I just can't pay for it. I live outside of GB.
Polish PAYPAL really sucks
Click to expand...
Click to collapse
Lokiwiz will unlock G3 AND G4 wizards.
So...
I've tryed it.
I'm running lokiwiz on good simcard (i have polish orange simlock so Insert Orange PL SIM). It gives me code.
Then Im inserting my card (I have Plus GSM) and phone says "network is locked insert code (or somethink like that, I dont remember it now)
So Im entering unlock code from Lokiwiz. After pressing "Unlock" I see today screen. After 5 seconds it goes back to unlock code screen.
Am I doing something wrong?
IPL: 2.21.001
SPL 2.21.olip
GSM:02.71.11
Simlock: Polish Orange.
I've tryed diffrent ROMS like TNT, NBD , Polish Official wm 5 from orange.
Hard Reset is not working also.
All the time the same problem ;-)
As you see phone has hardSPL
unlock sim card for qtek9000
can i can use this soft Lokiwiz for my qtek9000?
thks
lockwiz 3a
sim unlocked my g4 8125 with it yesterday,many thanks xda people
also can anyone recommend a good wm6 rom for the 8125 thanks in advance and this is a truly amazing website

Athena Project Touch ROM Update failed

Hello,
I tried the TOUCH 3.0, but after it gets to 1% update, the htc reboots and on the pc it says "image is corrupt, please check your updater utility" I have re-downloaded the touch and same thing happens, any help?
Thanks
You are probably going to get flamed for not searching, but I believe that means your phone isn't unlocked. If you haven't used Olipro's unlocker do that then retry the update. His unlocker isn't the same as sim unlocking just in case you didn't know. Good luck to you.
I did do search and I did come up with what you are saying that the phone is not unlocked, but it is unlocked, and I purchased it as an unlock phone, this is why I am stuck. So any help would be much appreciated.
From what I understand and read is that there are two unlocks that your phone needs. Sim unlock which is what your phone has and I believe IMEI unlock which it doesn't. Olipro's unlocker will take care of that. Using the unlocker either way is just a safe bet for making sure everything works well with your device.
marek101 said:
I did do search and I did come up with what you are saying that the phone is not unlocked, but it is unlocked, and I purchased it as an unlock phone, this is why I am stuck. So any help would be much appreciated.
Click to expand...
Click to collapse
you device needs to be cid unlocked not sim. Goto athena thread and dow nload unlocker from there. Use step one to unlock then you will be able to use this rom.

G4 SIM Unlocker

I need some assistance in UNlocking my 8125. I sent my phone into at&t for repairs, they sent the phone back locked. I am an old ATTWS customer, I have been waiting for one week for my unlock code. I recently purchased an 8525 and SIM/CID Unlocked that phone, but I need assistance with this phone. I have run the lokiwiz03a several times, but it keeps giving me "The system cannot find the path specified" on all the lines of the program. Of course at the end it does not provide an unlock code, It repeats the message.
I think you are not doing it proper,I may be wrong,but most probably you have to copy and paste two cab files 'Cert_SPCS' and 'EnableRapi' in the phone somewhere and execute them in the phone,then after that run 'lokiwizMSL' on your pc.
Cheers!
I loaded both .cab files on the 8125, they both ran succesfully. I have the phone connected to active sync. I am at a loss on this. I have no clue why this is not working. I have flashed numerous ROM's on phones, this one seems to be a pain the in the behind. At&t just returned the phone from repairs, could they have installed something to block this?
hmmm,
really strange though,may be they have put some kinda special code on it.what repairs were carried on it ?
btw,have you tried to sim unlock with WST 4.2 tool,ask mestrini,if it might do the trick.
Cheers!
I ran the WST as you requested. It is telling me that the DOC chip is write protected. When I run the CID Action and Run Super CID it returns that message. When I run SIM unlock it generates all the data from the phone and produces LOCKED in the status. At the bottom of all the data it returns DOC chip is write protected. I may be running this tool wrong, your info is appreciated.
WST simlock tool doesn't work on G4.
Easiest way:
1. Run flight mode.
2. Turn off your Wizard and insert "bad" simcard.
3. Turn on your Wizzard copy Two cabs Cert_SPCS' and 'EnableRapi'
4. Install it on device memory.
5. Turn on phone (in commanager)
6. Run lokiwiz, it should work!
How do I turn on the phone with the wrong SIm in the phone, it keeps going back to the SIM lock page. I am able to turn on the flight mode, but I can not do anything else, it keep srefering back to the SIMlock page.
simlock screen = run lokiwiz and enter generated code. It must work
Everyline on the screen reports "The system cannot find the path specified" I think at&t has protected this from unlocking?
same happens to me
try running lokiwiz from c:\
make sure that two cabs are installed
wizard is an old model I think at&t is taking care over iphone now ;p

How can I tell if my phone is UNLOCKED?

Hello,
how can I tell if my 8525 is SIM unlocked?
I bought my phone "unlocked", but then used ATT for service. If I end the service, will my phone revert back to being unlocked? And can an unlocked phone use Virgin mobile as a carrier? (I kinda doubt it, but maybe someone has tried it).
Should I use HardSPL 2.10 - Hard-SPL-V7 - FIRST before trying the unlocking tool? (The Free unlocker by pof mentions it comes with HardSPL v1.40)
Thanks, all of y'all are extremely helpful. (and no I'm not being sarcastic)
to see if your phone is indeed unlocked, try to put in sim cards issued by different carriers, if you can make a phone call then your phone is sim unlocked. do the same test with virgin mobile (remember that you need to get a hold of the sim card to put into your phone in order to connect with the cellular network). if a carrier never issues any sim card then it'll be difficult to use your phone with their cellular service.
Also, if you want to unlock, flash hard spl AFTER you unlock as it will downgrade your spl to 1.40. You want 2.10 olipro for safety.With hard spl on yor phone its harder to brick it and easier to fix if something does go wrong. I also use the sd card method of flashing for preference as its harder to pry my phone out of my hand and resetting it with th stylus while I'm trying to kill you.... The pc can be reset, hang, have usb disconnected or have power outage... result : bricked hermes.... Hope this helps....
Thanks for the responses,
I can't use activesync because I always get errors, so I decided to use the SD card method. I want to install HardSPL (the new one) first, so my device won't get messed up, so I researched on how to install HardSPL via SD Card. I found out that that I needed to rename the .nbh file to HERMIMG.nbh, and then I needed to put it into the "root folder". There's just one problem... where is this "root folder" located at?? I searched the net, but I couldn't find an answer. Even if I make it to view hidden files, the only folders I see are :WMDRM and MSMETADATA
And again, .... if I unlock my phone, it will go back to being LOCKED after I choose a carrier correct? In other words, it's not a: once you unlock it, it will ALWAYS be unlocked.... correct?
I ask cuz my phone was supposedly "unlocked" when purchasing, and if it was ALREADY unlocked in the first place, then maybe I won't need to unlock it again.
neojammer said:
Thanks for the responses,
I can't use activesync because I always get errors, so I decided to use the SD card method. I want to install HardSPL (the new one) first, so my device won't get messed up, so I researched on how to install HardSPL via SD Card. I found out that that I needed to rename the .nbh file to HERMIMG.nbh, and then I needed to put it into the "root folder". There's just one problem... where is this "root folder" located at?? I searched the net, but I couldn't find an answer. Even if I make it to view hidden files, the only folders I see are :WMDRM and MSMETADATA
Click to expand...
Click to collapse
it's always a good idea to catch up with computer vocabularies, otherwise you'd have more and more challenges following up moving forward.
try again with google, i did try searching for "root folder" and got a bunch of relevant hits explaining what it is and where to find it.
neojammer said:
And again, .... if I unlock my phone, it will go back to being LOCKED after I choose a carrier correct? In other words, it's not a: once you unlock it, it will ALWAYS be unlocked.... correct?
Click to expand...
Click to collapse
Yes...once you unlock it, it is forever unlocked.

htc leo unlock code

can anybody help me i just brought and tmobile htc hd2 and its not unlocked i have att service. does anyone know of a place where i caN GET FREE CODES????????????????? thanx in advance
no, sorry. Pay websites, or t mobile. No unlocker for the hd2 (that we know about)
But you can get it for $10.70 from this guy on ebay ....
I did not even need mine unlocked yet , but for $10.70 , just had to do it, got my unlock code in about 15 minutes , and it worked fine ...
Btw you can use file explorer or whatever, browse to /windows , and run simlock.exe and unlock your phone even if you do not have a foreign sim card ...
watcher64 said:
But you can get it for $10.70 from this guy on eBay
I did not even need mine unlocked yet , but for $10.70 , just had to do it, got my unlock code in about 15 minutes , and it worked fine ...
Btw you can use file explorer or whatever, browse to /windows , and run simlock.exe and unlock your phone even if you do not have a foreign sim card ...
Click to expand...
Click to collapse
I've used him several times in the past and never had any problems. Even on a Saturday he got me an unlock code within an hour. During the week - 10-15 minutes.
Do you have a friend with TMobile? Have him/her put their sim in your HD2 and then have them call TMobile from the phone requesting to unlock the phone.
Let them tell TMobile that they are planning on going out of the country and want to be able to use various providers. Tmobile will provide the unlock code to a current tmobile user.
watcher64 said:
But you can get it for $10.70 from this guy on ebay ....
I did not even need mine unlocked yet , but for $10.70 , just had to do it, got my unlock code in about 15 minutes , and it worked fine ...
Btw you can use file explorer or whatever, browse to /windows , and run simlock.exe and unlock your phone even if you do not have a foreign sim card ...
Click to expand...
Click to collapse
What exactly do you mean by this? I have a TMOUS HD2 coming and will need to unlock it from Tmobile. Are you saying this is all that will have to be done to unlock it?
Thanks, I've done a ton of searching and there are not concise answers to this that I have found.
watcher64 said:
Btw you can use file explorer or whatever, browse to /windows , and run simlock.exe and unlock your phone even if you do not have a foreign sim card ...
Click to expand...
Click to collapse
Tref said:
Are you saying this is all that will have to be done to unlock it?
Click to expand...
Click to collapse
Dont get excited, , what it means is that rather than have to put a different sim into the phone to automatically bring up the unlock code wizard so you can enter the code, you can start the wizard manually and enter the code, thus you can unlock it whilst you still only have the tmo sim to work with.
Ah, thanks. I figured it wasn't what it sounded like.
So, "the guy from eBay" seems to be the place to go for a quick and successful unlock code? The price is right anyway.
Thanks
Yea. seems to get pretty good feedback. I got mine from O2, took them 6months, lol, but hey, it was free, and i didnt actually need it unlocked.

Categories

Resources