Related
HTC Wizard SoftSPL (sSPL) For G4 Wizards
FAQ:
What is SoftSPL?
-SoftSPL is a patched SPL that will temporary unlock your CID (untill reboot).
-It will be copied to your device and loaded (BUT NOT FLASHED!), the device is tricked to believe it has SuperCID (More accuratly g_cKeyCardSecurityLevel will be 0 ).
Why Temporary?
-1st because of warranty, since there is no CID block written, warranty isn't void
-2nd with this tool it's not necesarry to have a permanently unlocked CID.
-3rd it's safe, it doesn't flash CID block or IPL/SPL by it's own, but choose your ROM you want to flash wisely!
Isn't shelltool the same?
-no shelltool will strip the rom, and then flash it with pdocwrite, where sSPL is a bootloader which says it has supercid, thus tricking the RomUpdateUtility.
But can I make it permanent?
-Yes it can make it semi permanent, with HardSPL (it's the same trick, but now a patched SPL is flashed to device).
What does Soft SPL change on my device?
-nothing, it's loaded into memory. Only the ROM you choose to flash with the RUU will change your device.
USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip
G4 Safe means:
-No IPL/SPL and no Extended ROM.
Many Thanks Go to:
Olipro: For patching the latest SPL
SAA044: For testing all the versions, and keeping his head cool when the first hardSPL killed his Wizard (beyond repair!), and for keeping on testing the new versions with his brand new Wizard!
Whiterat: For all his technical and moral support, without him it wouldn't have excisted.
Pof & Des: From whom I took the idea, and some of the scripts.
NB. This sSPL is not for G3, it will proceed with updating, but in the end OS will not be written, tested it with my own G3. Beware of the SPL/IPL (there is danger to flash G4 spl on your G3 due to the fact you are using a G4 sSPL, the RUU will probably think it's running from a G4 device!).
NB.2 If you want to mtty in stead of flashing a ROM, place mtty in the folder and rename it 2.exe
[EDIT:12-september 19:54] I updated the file for a confirmed working RC1 (v0.1) WITH the missing dll [/EDIT]
[edit] 23.09.07
Some people reported that enable rapi does not always work, if that is the case for you, you can try to replace the original enable-rapi with the one attached here.
[/edit]
Well Done Eqx and Well Done to everybody else involved.
I look forward to giving this a go.
This is great work.. I will try this first thing in the morning..
Many Thanks
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any room?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft room = new room without spl & ipl?
awaiting ur reply & thanks again for ur hard work
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any ROM?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft (safe?) ROM = new ROM without spl & ipl?
awaiting ur reply & thanks again for ur hard work
Click to expand...
Click to collapse
First, you're welcome.
2nd Please keep in mind you need IPL/SPL 2.xx.00001 for WM6 (use the latest officcial one from your provider)
3rd It's not different from an ordinary flash, you can go back to any ROM that is G4 safe.
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Thanks bro
thanks bro for ur quick reply & i will try it as soon as TNT5 release.(inshaa-allah)
it's sound pretty easy ... i'mma try it 2marow as well .
thanks for everything
where r u guys?
42 person's were downloded without any comments. your feedback is very important to other's.
yalla come on
[solution] G4 SoftSPL Flash any ROM to CID locked device
Thanks!! I wil post the results a soon as i flash a new ROM
Thanks!! It's 2:33 in the morning where I live and I just found this. Am trying now. Will report results.
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
My way
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
saa044 said:
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
Click to expand...
Click to collapse
The only difference now is that there is a ROM folder now
hmmm
thomme said:
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
Click to expand...
Click to collapse
Most of the roms on this page should be G4 safe.
http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6
The ones I have tested up till now is the wrcx, TNT and SNE 3 ones. Try what I said in my previous post, that might also work for you. What error did you get by the way, a 620 errors that said it could not communicate with device?
the-equinoxe said:
The only difference now is that there is a ROM folder now
Click to expand...
Click to collapse
yup, that is nice.
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
the-equinoxe said:
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Click to expand...
Click to collapse
I have a CID Locked G4 and I can flash using RUU any ExtendedRom
contact me
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Contact me via msn at [email protected] I will try me best to help u, but eventually EquinoXe is the master here.
saa044 said:
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
Click to expand...
Click to collapse
Here is exactly what my device is doing:
I flash back to the official T-Mobile WM5 rom for the 2.26.0001 IPL/SPL adn then let customization finish and then try to softSpl but with no success. On my MDA, it asks me to confirm something and the screen never turns white like it is supposed to do.
I have tried this several ways and on 2 different roms.
I have tried flashing back to T-Mobile official but skip customization 2 times and use softSpl to flash faria's rom and it failed. I tried once after waiting untill customization is complete and installing faria's rom and it failed once again.
I also tried installing cert_SPCS.cab and installing enablerapi.cab prior to running softSpl 2 different times, once before customization and once after customization. both times failed. this time I was using Black Diamond 2.0 instead of faria's rom to see if it was just the rom.
Not once did I ever get the white screen and not once did it flash successfully using this method.(At least not for me)
Hi,
i was trying to upgrade my Hermes to WM6 and i was doing it according to mrvnx guide. First i tried the WM6 guide. Ipl was 1.01 and SPL was 1.11. Evrything went fine up until the part where the actual ROM was supposed to be flashed. The update pocess started, and i went for a smoke somewhere at 2%. When i came back, there was a message saying image file was corrupted, and Hermes was up and running. So, my first instinct was that i missunderstood something and that that guide was for phones already having WM6, so i decided to do the WM5 guide. I flashed the SPL, skipped the radio upgrade (cause i didn't know whether to use that version or the later one) and skipped to the next page. And, low and behold, there it says "Firstly download the WM5 ROM you wish to upgrade to"
And now i'm stuck and i don't know what to do. Should i get some WM5 ROM and first upgrade to it and then to WM6? Or should i go straight for WM6 ROM? If so, do i just follow the WM5 guide only using WM6 ROM or do i just flash it by the WM6 guide?
The phone still works with no problems at all. The desired WM6 ROM is Pays Full. Is it really corupted (got it from the "download full" link in the first post here), or was it my mistake?
Sim unlock and cid unlock your device then - http://pof.eslack.org/hermes-unlocker/
Download your carriers Rom (wm5 or wm6 - o2,orange,at&t etc)
then flash that.
then HARDSPL your device - http://forum.xda-developers.com/showthread.php?t=296722
then use modified updater to flash your device with the wm6/6.1 rom of your choice.. works fine for me.
2.10 bootloader with the "is it hardspl" checked and wa'la its updated
hope this helps.
Thanx for the answer. I doubt i'll find my carrier's rom, since i'm from Croatia, and i think it hasn't been posted here, and certainly hasn't been posted on my provider's site. I did make a backup before upgrading, and i have the three raw files made with itsutils. Will this do?
Also, could you please explain why i need to sim/cid unlock it? The device itself is not branded at all, i believe it's only locked to the provider's sim, and that's all. Does sim /cid unlocking cover that or is it about something else?
Thanx!
Sim unlocking = you can use other sims
CID unlocking = you can use other roms (maybe why your update is crashing)
HARDSPL = One less chance of bricking your device
as your device is still currently up and running im guessing you can do it all via that rom.
Ok, just so i don't missunderstand you, can i do what you suggested, but without flashing the carrier's rom?
you can, however you may encounter problems with wm6.1 in the future (hard resets etc)
OK to clear this thread up....
...make sure you have flashed HardSPL before continuing then...
...redownload the ROM it sounds like it has become corrupted whilst being downloaded so make sure you unzip the whole thing to a folder first then try it.
did everything like kingsizeriz told me, except i did it on the existing rom. uploaded the same rom i tried before and it worked like a charm. me and mates have been fiddling with it the whole evening and noticed no problems so far. Thanx for the help, much appreciated
Btw, one last question, is NK.EXE supposed to be 0 bytes?
!!!+++***PLEASE, PLEASE, PLEASE NOTE! THIS IS ONLY GOT G4 WIZARDS!!! THIS GUIDE IS NOT INTENDED FOR G3 WIZARDS IN ANY FORM OR FASHION!!! IF YOU FOLLOW THESE INSTRUCTIONS AND ATTEMPT TO UPGRADE A G4 WIZARD WITH THEM, YOU WILL BE THE OWNER OF A WHITE PLASTIC BRICK!!! NEITHER I NOR XDA-DEVS WILL BE HELD RESPONSIBLE IF YOU BREAK YOUR WIZARD FOLLOWING THIS GUIDE!!!***+++!!!
Hey all, since most people are asking for pictures and such on how to upgrade G4 Wizards to Windows Mobile 6 or better, I have gone ahead and made a text guide, with screenshots to follow along with, that also includes all of the files needed to upgrade a G4 Wizard with(along with credits to their coders.). It is uploaded to MediaFire, and the link is at the bottom of this post. Here is whats included:
How-to text guide, written by Myself
The Wizard Service Tool, by mestrini
The ActiveSync Setup.exe, for people that dont have it already
and SoftSPL, by the exuinoxe
PLEASE NOTE!!!-I did NOT include any ROM files with this package, YOU MUST supply the ROM of your choice yourself(this is stated in the guide aswell.).
Yes, it IS a SoftSPL guide, seeing as NO n00b understand how to make the HARDSPL method work. It is(imho) well written, and all of the screen shots are marked with arrows and such as to what to do next...so please, everyone download it and make improvements, criticize whatver. And please note!!
I DO NOT WANT ANY KIND OF DONATIONS FOR THIS THING!!! I have had 3 people send me money for this guide from my forums, and it should not come to me. IF YOU GET SOME USE OUT OF THIS GUIDE, THEN PLEASE DONATE TO EITHER XDA-Developers, OR TO THE ORIGINAL SOFTWARE AUTHORS, NOT TO ME!! Thanks!!!-ashasaur
DOWNLOAD LINK-(filesize approx-13.15mb)-http://www.mediafire.com/?hzbx043cglm
Great guide. I think it might flow better in a html format or posted on the forum here with the images linked offsite?
Hey, I'm a noob(ish) and I've managed to unlock my phone through HardSPL. Didn't think it was that hard.
But of course the 2 and a half years of Computer engineering school plus work experience manually loading roms into memory from the bootloader on an embedded system couldn't of hurt.
Can not find the upgradr guide
Hi ashasaur,
I am trying to download the upgrade guide from http://www.mediafire.com/?hzbx043cglm but it says not available, is there another way to wownload that please?
Thanks,
Sam
well, ive just tryed it, and it seems to still be there...try again perhaps?
Thanks
WORKS fine. Nice guide. Easy to follow.Thanks...
WM6.1
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Cphil1 said:
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Click to expand...
Click to collapse
Upgrade to TNT 19213 series,its wm6.1. Yes ! flashing a new rom will completely wipe out and replace the existing rom and files,its just like formatting the Hard drive of pc while installing a new OS.
can u give me a rom pls i only have my spv m3100 for one day and the guide is very easy to follow but i don't know what rom to use please help
I start Wizard Service Tool an click on [Enable Rapi. and Unsigned Apps].
After this it comes about 20 seconds later that all is ok an i can do the following steps. When i go to Device Info i get this:
On Wizard Service Tool i have got this Message:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
Can anybody tell me why?
I have try softreset an do all steps again. Not better.
Engersen
are you using a G3 of G4 device? Again I say, THIS GUIDE IS ONLY FOR G4 WIZARDS!
I have got a G4.
My Wizard show on start IPL 2.21.0001 and SPL 2.21.0001.
Any ideas for my Problem?
Thx Engersen
hmmm, I would just go ahead and skip that step then, and start after it, with the SoftSPL and such. Just read and you should be fine.
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Engersen said:
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Click to expand...
Click to collapse
Sometimes, 'EnableRapi' and 'Cert_SPCS' doesn't get executed automatically by WST Tool,so its recommended to manually copy and paste these two files in the phone and execute them,you'll find these files in the installation folder of the Wizard Service Tool folder in the 'Files' folder in the Program Files on C:\ drive.But WST Tool doesn't CID unlock a G4 device,so if you want to upgrade,then read and follow the methods 'SoftSPL or HardSPL posted as stickies in the this G4 forum.
Yes i know that WST is not unlock CID.
I use the package from first Post. There is SoftSPL inside to unlock. Right?
Ok, i think i have following steps to do.
Copy both files 'EnableRapi' and 'Cert_SPCS' to Wizard and execute them.
Then Unlock CID with SoftSPL and follow all other steps from Userguide of Package from the first page. Right?
Thx for help and greetz from Germany
It ist possible downgrade back to WM5 if WM6 is not my like?
Engersen
of course, though you will need to follow one of the downgrading guides here on the forums, as I do not know the exact steps.
Ok, thank you for help. In German all was easy for me. Now i want to ask for everything
Downgrading to official wm5 depends on the method with which you upgraded. If you upgraded through SoftSPL,there's no further procedure,just flash the official rom,coz SoftSPL doesn't change the official original IPL/SPL,but if you upgraded through HardSPL,than you'll first have to remove HardSPK revert back to original IPL/SPL and then flash the official rom,as HardSPL flashes the patched IPL/SPL and its changed.
I have a Wizard 110 (HTC P4300 from Unicel, prolly the most rare carrier to find using this phone lol)Its a G4 and I used the awesome and easy tutorials in here to use HARDSPL to flash a really nice WM6 rom (Underground_edition_Crossbow_ROM)
I saw that TNT had a new TouchFlo release for my phone, but when I try to flash it to the phone it says my updater is too old (Error 300). I flashed back my original ROM to the phone and it still says the same thing. I was just wondering if I'm stupid and missing one little simple thing to do (my typical luck).
Thanks for your time!
in my experience, even with HardSPL applied, you still have to use the SoftSPL loader each time you want to change your ROM on a G4 device...at least, thats what I have to do.
I would go and grab the SoftSPL package from the G4 sub-forum sticky, and use that. Just follow the instructions and you should be fine!
Download the Mun's RUU from the HardSPL thread,replace this with RUU in the TNT Rom and run the RUU,it'll flash.
To flash official rom,you'll first have to remove HardSPL,read in the G4 sub-forum about 'How To Remove HardSPL'.
I recently flashed my Wizard with TNT WM6 and I am getting all kinds of problems so I am wanting to bring it back to Wizard Love so I can attempt TNT's again and avoid a "bad flash".
My question is, do I need to put the phone in the bootloader (i.e. the 3 colored bars?) or can I flash it with the phone loaded and everything. I am using RUU to flash.
Or do I need to use ShellTool?
If its a G3,then simply hook up the phone with pc and run the RUU,it'll reflash,there's no need to get into Bootloaders (RGB Screen).
But if its a G4,then how did you upgrade first,if through HardSPL,then again just hook up and run the RUU,well,if you used Shelltool,then there's no need to go through again with Shelltool.Get the phone HardSPL once,then you can flash any rom as much as you like
I used shelltool for the first flash, but it kind messed up so I had to redo Wizard Love with the RGB boot loader.
If I remember correctly by "messed up" I think it froze during flashing.
Yes I do have a G4
well do as zabardast_1's has said and flash HardSPL to your g4 wizard and then you can just flash another cooked rom
and added....Don't use ShellTool again even you are using a G4! RUU can be used on G4 directly given that you have installed HardSPL and you are going to flash a custom ROM posted here.
So even though ShellTool kinda messed up, my device is still HardSPL'ed?
To be safe you can flash using Softspl , that is the way i flashed few times althouhg my wizard was hardspl and it was ok. If you have hardspl try using Mun's RUU . Both methods worked fine for me.
Ok, I just re-flashed my G4 with Wizard Love using the RUU that it came with and everything seemed to work fine. Does this mean that my HardSPL was successful? See what I think had happened was I flashed TNT's rom with ShellTool and not RUU after I had HardSPL'ed my device. Could that have had something to do with it?
Thanks for all the help so far, you guys have been very knowledgeable.
Read this maybe its helpfull for you http://forum.xda-developers.com/showthread.php?t=435852
Mortifix said:
Ok, I just re-flashed my G4 with Wizard Love using the RUU that it came with and everything seemed to work fine. Does this mean that my HardSPL was successful? See what I think had happened was I flashed TNT's rom with ShellTool and not RUU after I had HardSPL'ed my device. Could that have had something to do with it?
Thanks for all the help so far, you guys have been very knowledgeable.
Click to expand...
Click to collapse
Ah! You are mixing up all three methods Shelltool,RUU,HardSPL together,they all are different methods to flash a rom.Shelltool is a different method then RUU(RomUpdateUtility) and HardSPL(Patched IPL/SPL) is altogether a different process to flash and upgrade a G4 device.
Try to read all about these methods for better understanding.
Here, I wud not like to go into details,you can read about these methods in their respective threads.
Flashing wizard_love rom doesn't mean your phone is HardSPL'd ? No,wizard_love rom is a patched rom,it'll flash to any G4 device with original official IPL/SPL (Bootloaders) running on it,but if the phone is HardSPL'd,it flashes patched IPL/SPL,thus tricking it to think its semi-permanent CID unlocked,after this its possible to flash any wm6.1 custom rom.But flashing a wizard_love,it still has its own official IPL/SPL,but you cannot upgrade to any wm6 rom as its not CID unlocked.As a G4 device cannot be CID unlocked like a G3 phone,so KardSPL is applied to make it trick into semi-permanent CID unlock,whereas,its in fact CID locked,but here its possible to upgrade to any wm6 rom,hope you got my point !!!
So,if you want to upgrade to wm6 or flash TNT wm6.1 rom,you have to first apply HardSPL,it'll change the IPL/SPL of the phone,only then you can flash TNT wm6.1 rom
Ok yeah thanks for clearing that up for me I was trying to update my phone with the RUU that came with TNT .20273, but it kept giving me an Error 300 which I am assuming that means its not HardSPL'ed. So from the sounds of it, I would probably like to get my phone HardSPL to I can flash any new roms that come out. I was under the assumption that ShellTool was HardSPL'ing my phone, but I guess not. Before I proceed to the next step, is this the instructions I should be following?: http://forum.xda-developers.com/showthread.php?t=332320
EDIT:
Ok, I went ahead and HardSPL'ed my device. I followed the instructions on that thread and everything seems to be working. I get SoftSPL: something something olipro so I am guessing thats good. I am still having problems when I go to flash TNT. I am trying to use the RUU that is included with TNT, but I keep getting Error 300 (Invalid Update Tool).
ok,download 'Mun's RUU' from the HardSPL thread you just posted above and replace the RUU in this zipfile with RUU in the TNT rom and run this replaced RUU,it'll work and flash the rom
I have everything all set and I am rocking TNT .191213. Thanks for all the help guys!!