Related
Hallo,
I want to tune up my german mda2's extended rom also.
But i can't . It's read only!
Can't delete,write,rename.
I only can make it visible thats it.
Please help!
Edit:
It seems that the disk on chip (doc) can be write protect by software.
Look here:
http://www.spezial.ru/products/producer/msystems/pdf/App_Note_011.pdf
There is an entry in the windows registry called TrueFFS.
(True Flash File System).You have too search the registry for trueffs.dll
I would be interested for some dwords values from other people whos rom is not protected.
For instance the key "Ioctl" has an value of 4 in my mda2.
This is my TRUEFFS Registry Area:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS]
"Profile"="TRUEFFS_DOC"
"Index"=dword:00000001
"Dll"="TrueFFS.dll"
"Prefix"="DSK"
"Order"=dword:00000000
"Ioctl"=dword:00000004
"WindowBase"=dword:04000000
"DeviceArrayIndex"=dword:00000000
"IClass" =hex(7):7B,00,41,00,34,00,45,00,37,00,45,00,44,00,
44,00,41,00,2D,00,45,00,35,\
00,37,00,35,00,2D,00,34,00,32,00,35,00,32,00,2D,00
,39,00,44,00,36,00,42,00,\
2D,00,34,00,31,00,39,00,35,00,44,00,34,00,38,00,42
,00,42,00,38,00,36,00,35,\
00,7D,00,00,00,00,00
Deckard
I have the same problem, after I used the Extended ROM unlocking tools I can unhide and see the contain of the Extended ROM, when I tried to unlock, it showed me a debug popup window and the content is 'ERROR: FL_IOCTL_BDTL_HW_PROTECTION' , the ROM cannot be unlocked for adding or deleting ?? !!
Anyone can help ??
First of all .. my thanks goes to all the people to this forum!
You're really GREAT !!
In any case sorry for my poor english :wink:
I've few questions ...
I've read many many pages but I can't understand the right procedure to follow for dumping my Himalaya original ROMs because in some pages the "d2s" command is followed by some numbers and in other, by other numbers ... confusion bring me !
After that, otherwise, I've tried to follow the XDA II procedure and the storing procedure to SD seems to be ok .. but when I try to save the rom dump from my SD to PC using ntwr (otherwise was unreadable in Win), I've got a read error but, in any case, I obtain only one file on my PC of about 400 MB and I suppose that something is wrong because all of you speaks of about 50 MB ... so ... What's the right procedure with the right command? How can I be sure that my dump is correct? The dump it's only one file or one for separate ROM Radio and Extended?
When I solve this issue I can try to upgrade my Himalaya to WM2005.
Thank you for your help.
Please help me, I'd like don't lose my guarantee.
This post was submitted also to buzz forum
Now this is the situation ...
Qtek 2020 - 1.66.04ITA
-= Preparing the device =-
01 ) I,m gone to Bootloader (Power + Directions + Reset)
02 ) I see on the device "Serial v1.06"
03 ) I stop MSSync service Ctrl+Alt+Canc and stop wcescomm.exe
04 ) Put device on cradle
05 ) Now I see on the device "USB v1.06" instead of "Serial v1.06"
06 ) Put the 512 MB SD into the device
07 ) Start Mtty 1.42
08 ) Leave as is all the parameters
09 ) I've "USB" port (and not ".WCEUSBSH001") and I press USB
10 ) Ok seems to be connected to the device
-= Dumping the ROM on SD =-
11 ) Into mtty command line I write (and not copy and paste and without "sd a" at the end)
d2s 80000000 02000000
12 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
SDCARDD2S+,cStoragePlatformTyp e=FF
****************************** ****************************** ****************************** ****************************** ********
Store image to SD/MMC card successful.
USB>
13 ) Then I write
d2s 60000000 00300000 sd a
14 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
************
Store image to SD/MMC card successful.
USB>
15 ) Then I write
d2s 70000000 01080000 sd a
16 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=EA0000
All:dwSize=1F20000
****************************** ****************************** ******
Store image to SD/MMC card successful.
USB>
-= Saving ROM from SD Card to PC =-
17 ) Put the SD Card into a Card Reader
18 ) Go to Dos command line into ntrw path
19 ) Type "ntrw read ROM.nb1 H:" where H: is the Card reader drive
Now start the problem ... :shock:
I want to know if it's all ok with this process ...
The output of ntrw is:
NTRW 2.0
Removable media
Cylinders: 0:60
TracksperCylinder: 255
SectorsPerTrack: 63
BytePerSectors: 512
bufsize is 65536
500629504 bytes written bytes: 0
ReadFile(): ROM.nb1 -- Parametro non corretto
First signal of some error but someone tell that's ok!
And then I see prompt.
Now I find the file ROM.nb1 that is 477 MB (like the SD size after a FAT format).
It's ok? ... I don't think so .. but let's going on!
I open the file with an HEX Editor and the file seems ok but after a string like HTCE the file contains all 00h.
Can I cut off that part?
How can I ensure myself that's all ok?
Come on guru don't leave me with the bootloader splash screen instead of the MAGNETO one :lol: :lol: :lol:
Thanks to rhmartin's help (on buzzdev.net) I've reach this situation ..
I've got my dumped rom in SD and in a file.
But ...
I acquire more information about my Qtek 2020 (XDA2):
ROM: 1.66.04ITA
Radio: 1.10
ExtROM: 1.66.148
I think that's a WM2003 (not SE), isn't it?
In any case ... I put back my dumped roms in SD and followed the procedure for rom restore:
1 - Bootloader
2 - Put SD into device
3 - Wait for "Press Power Button"
4 - ecc. ecc.
But I never reached number 3, what's wrong?
I've put back the dump as a single file (as ntrw output give to me), it's correct or I must put it back (and so backup first in that way) as 3 separate files?
I've seen that in download area there's no WM2003 dumped rom, so I search by myself and I found RUU172128ITA (1.72 ITA) but I prefer if my backup can be useful for disaster recovery and can be used for my original version backup.
I think that you understand my situation .. I prefer ask before a not funny situation instead fill the forum with hundreds emergency posts.
I hope you think I've reason.
Thank you for the patience and sorry for possible misunderstandings or english syntax errors!
NO ONE CAN HELP ME ... INCREDIBLE!
I'm ready to ask sorry but ...
There's no one in this great forum that can help me ...
IT'S INCREDIBLE !!! :shock: :shock: :shock:
I don't think that no one haven't my problem ...
PLEASE SOMEONE HELP ME
:evil:
What is this file ???
Is it aku 3.3 in english or russian????
-----------------------
MODERATOR EDIT:
Changed the subject, use this as the main thread to discuss HTC 2.05 WWE AKU 3.3 ROM issues.
Download and ROM details in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
BE SURE TO READ THE WIKI BEFORE ASKING QUESTIONS PLEASE
English.
If you need Russian one look for it in Upload/Temp directory
It is in English, I just flashed it using 1.10mfg method
An still no MUI I presume ?
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
bubu23 said:
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
Click to expand...
Click to collapse
ftp://ftp.xda-developers.com/Uploads/Hermes/
Here you have.
BuT WhY TyPinG LikE ThAt ! Are YoU PaRkInsOn ?
Is it from HTC or cingular? I've heard both are about to release an AKU 3.3 rom
loll no im not parkinston maybe my keboard is
but why the file finish with test?
its not good its just test???
plz tell me im horny on that fileee(rom)
English confirmed.
Just flushed OS and Ext rom.
ROM Version:2.05.255.1
ROM Date: 01/17/07
ExtROM Version: 2.05.255.101
OS 5.1.461 (build 15671.3.3.0)
I can't get to FTP :/ what user and password ?
reg
Sar
Username = xda
Password = xda
You get to the ftp by this link no pass needed...
ftp://xda:[email protected]/Hermes/
Cheers
Seems very fast...
cant see where it says TEST though. My of been a test for the carriers, so likely the RTM for the carriers to then implement.
So far, so good... at least this one is english, unlike the Swedish update i did yesterday
in the ftp thers only the swedish rom i cant find the wwe rom??
RUU_Hermes_2.05.263.1_6275_1.34.00.10_108_SVE_HTCEUR.exe is now up... Guessing it is an official release from htc?
Cheers
Well i flashed it also.
the Test is included in the splash.bmp. =)
really... But imho the swedish one is a bit faster, but that is just subjectiv i didnt tried to test it with a benchmark program.
btw. any update from cingular?
Somethings fishy about this.
This is supposed to be AKU 3.3, but theres no WPA2 support???
not sure this is a complete ROM?
Does this mean MS Voice Command over bluetooth is fixed without the hacks?
I have detect problems with this rom! Is better wait for another!
Problems detect:
- No wpa2
- Phone connection always breaking down
- Can't go to my contacts!
- ActiveSync always says pocket is out of memory (yes I reset several times)
Flash Using Lnb
This is my first time flashing using lnb and i followed the wiki about using mtty..i just wanted an experimented persons to examine the output of mtty and tell me if the update was perfectly done and if there was no problems in nand please...
Thanks
Iverson....
USB>
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 461
Storage Total block: 475
Total Bad Block in CE: 0
NeedToEraseBlockStart: 474
Storage format success
USB>lnb 06_OS.nb
:F=06_OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 501A0000 Length: 3C0C800
*********************************************
*********************************************
*********************************************
*********************************************
*********************************************
*********LAST BLOCK, dwBytesCollected=0x13800
Code entry point at 0x53DA0000
Write Nand Success
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 473
Storage Total block: 463
Total Bad Block in CE: 0
NeedToEraseBlockStart: 486
Storage format success
USB>
Just wanted to share some simple performance figures I pulled on my TyTn's Storage Card
Device: TyTn (HERM200), ROM 3.54.253.3
OS: Windows Mobile 6, CE OS 5.2.1437 (Build 17944.0.3.1)
Storage Card: 2 GB SanDisk ultra II Micro SD card
Testing Tool: SKTools 3.1.9
Notes:
-Before testing I used SKTools to optimize for performance. this changes cache setting and I imagine this has an effect on test results.
-I have no idea how SKTools mesure performance, what mis of large/small files.
-Each filesystem format was only tested once. I tried running it a couple of times for one of the formats, and noticed a small difference.
-All results is without backup FAT, to get the fastest performance.
-First two bars in the graph is FAT16, the rest FAT32
-The number after FAT16/FAT32 referes to the cluster size, ex. FAT32-16 has Cluster size set to 16384
-WRITE SPEED IS MULTIPLIED BY 10 TO MAKE IT FIT IN ONE GRAPH
Graph
Regards
ThMoJe
I installed Schap's advanced config tool
There is a setion that lets you adjust te system cache's
There is no help on this that I can find.
Right now they are all set to:
file system cache: enabled
file system cache size: auto
file system filter cache: disabled
glyph cache: 8KB
Are these OK or would different settings be better?
i have the same question, only not for a HTC titan, but for an HTC Kaiser
I guess this is a big mystery! No one knows...
Even Schap won't answer!
Same question for Touch Pro
I found these references, though neither was very helpful. I think we'll need to experiment to find out what is good (stable).
http://forum.xda-developers.com/showthread.php?p=2833780
http://ppcgeeks.com/forum.ppcgeeks/showthread.php?t=17219&page=182