OK, Here is the deal.
I have created a working XdaLive Screen Lock for the XdaLive Live Wm6.
This is similar to the iphone with a working Sliding Unlocker. Only I put the sliding unlocker on the top and used XdaLive image as the Background & put the Digital Clock and Date at the Bottom as you can see in the Image I attached.
FINAL WORKING LIST:
1. Battery Life
2. NEW SMS Counter
3. Active Tasks
4. New Emails
5. OWNER NAME DISPLAY.
(TODO: A LOT OF THINGS LIKE ADDING MORE FUNCTIONALITY, FIX A LOT OF LITTLE THINGS & NEED TO FIGURE OUT HOW TO READ REGISTRY KEYS with SPACES in BETWEEN ANY HELP? ONE THING IS TO NOT HAVE THE APPLICATION QUIT ON END BUTTON (FIXED!).)
Another thing:
----------------------
Does anyone know how to replace the default Lock with this one? I tried replacing the DeviceLock.exe with this one and it does not work. BSDeviceLock.exe does not exist in WM6 either.
WAS A LITTLE OUT OF IT BECAUSE OF JACK DANIELS. HENCE THE BLACK SLIDER
DUE TO A LOT OF PEOPLE WANTING TO TEST THIS, I DECIDED TO JUST PUT THE FILES IN THE OPEN AS I WORK WITH THEM. LIKE DAILY SNAPSHOP OF THE EXECUTABLES (WHENEVER I WORK ON THEM)
THIS IS A PRE-PRE BETA OPEN TEST RELEASE AND NOT PACKAGED.
UNZIP AND PUT THE FILES IN A FOLDER. THE DLL & THE EXECUTABLE HAVE TO BE IN THE SAME FOLDER
REQUIREMENT: FLASH ACTIVEX (NOT FLASH LITE)
ZIP FILE DESCRIPTIONS:
--------------------------
1. xdaLiveScreenLock.zip (XDA LIVE UNLOCKER)
2. SliderLock.zip (JACK DANIELS BLACK SLIDER)
*****MORE IMPORTANCE WAS GIVEN FOR LOOKS RATHER THAN FUNCTIONALITY WHEN STARTING THIS.****
not responsible for anything that might happen by using this little useless application. There are a lot of small glitches usability wise, else works good. preference was given to aesthetics more than anything else. The size is big due to the sliding component being created in flash.
ADDED A 240X240 SLIDER. THIS HAS NOT BEEN TESTED AS I DO NOT HAVE A 240X240 Device.
.
this looks excellent, good job! I have been wondering about that also, devicelock is signed is it not?
Anyone know of a generic wrapper with basic API calls that I can call from within this Flash Application?
edit: compiled own from source code found, change adopted and compiled.
Hi,
i don't really use the device lock... because when turning the phone in standby all key's are locked and i don't want that the screen is always on...
or is there any other significance about using the device lock??
cyberdrakula said:
NEED TO FIGURE OUT HOW TO READ REGISTRY KEYS with SPACES in BETWEEN ANY HELP
Click to expand...
Click to collapse
don't really know it helps... but just test too but the string in " " like in commandline when using spaces... maybe you can just try to use double bslashes \\windows\\system32\\
this looks awesome. the people on this forum never cease to amaze me. Pure Genius
WOW the progress of this is really good sir, youve managed to implement a few more features since i last looked. This will definatly be in the Extras wiki page once it is fully working
I thought about what you could do in respect to replacing the standard lock, disable the lock in the today settings and map this program to a hardware button (5??) How does it fair after a power off (just standby not fully off) as it would be a good way to check the time etc... in the night?
keep up the good work CD, quite a few people are waiting for something like this.
Heya all gurus, give tha man a little help with issues maybe?
Thanks Ppl.
This is something I have been wanting to do for a while now but just got around to doing it. Hopefully in a couple days I will have everything squared out.
I am wondering if I should let ppl test this out. I will also have changeable backgrounds for this.
.
futureshock said:
Hi,
i don't really use the device lock... because when turning the phone in standby all key's are locked and i don't want that the screen is always on...
or is there any other significance about using the device lock??
don't really know it helps... but just test too but the string in " " like in commandline when using spaces... maybe you can just try to use double bslashes \\windows\\system32\\
Click to expand...
Click to collapse
To read the registry I had to actually use \\\\ to get to different levels. But I am NOT able to read the Value Names with spaces.
.
CCRDude said:
Since not even Sbp Mobile Shell was able to replace the lock screen (and that while they basically have something to show then ready with their new Intro screen), I guess it could get quite complicated to replace it...
Does anyone know if the fake iPhone things that were or were not around are able to replace the lock screen? I especially remember that last one were only videos existed, it had a real good fake, but I'm not sure if the video showed it really in action as a lock screen?
Click to expand...
Click to collapse
I am able to Execute it on "Device Wake" via notifications (thanks KYPHUR for the suggestion.) I also actually was able to replace keylock @ Install time and an installation induced reset. The icon also shows up in the Setting folder.
I am also thinking about doing a Today Plugin. Let's see how that goes.
Looks nice..cant wait till its released..
open Pre-pre Beta Test Release On The First Post.
.
Where to download?
Yeah!!
Would love a slider unlocker as a today plugin. I use the WMP plugin since I use my phone as an mp3 player a lot so the device lock function on the today screen is a must for me.
Great work and look forward (hopefully) to a today plugin.
S.K.
cyberdrakula said:
To read the registry I had to actually use \\\\ to get to different levels. But I am NOT able to read the Value Names with spaces.
.
Click to expand...
Click to collapse
Could you use %20% AND %40% to represent the space and other special characters as they do on other windows products? MS has a list on its knowledge base for these...I think %20% is the space, but not sure
eagle 1 said:
Could you use %20% AND %40% to represent the space and other special characters as they do on other windows products? MS has a list on its knowledge base for these...I think %20% is the space, but not sure
Click to expand...
Click to collapse
yes, in html and such it is, maybe you could use \%20%\ as space , but I am just a webprogrammer, and not a very good one
Looks fantastic, can't wait to see this released, should be a good little utility!
Could you make the slide on the bottom because I have short thumb
cybertron said:
yes, in html and such it is, maybe you could use \%20%\ as space , but I am just a webprogrammer, and not a very good one
Click to expand...
Click to collapse
Actually, in HTTP requests it's %20 w/o the percent sign at the end, and it simply means 0x20, which is hexadecimal 20 or decimal 32, which indeed is a space. I highly doubt that it would be useful in accessing the registry, though.
I don't see why a space doesn't work as just a space when accessing the registry. Perhaps escape it with a backslash (or two)?
Where to download?
Where to download?
Related
http://blog.yam.com/leo2016/article/11682010
This is the original Link to a working TouchFlo (Alpha) I am currently testing on the Athena using VGA 96 DPI and the AP/PK's latest v2.0. I have included a zip folder of selected screen shots. I first found this link outside the forum, then learned that other devices on the forum are already working with it.
The program is installed via two CAB files, one installs Adobe FlashLite, the other is Szabi CubeLauncher. Perform a soft reset after loading. Launching is currently to a 'Home Screen' Start>Programs>CubeLaunch. The home background is a bit suggestive, so if you would like to avoid that image, copy the attached bg.jpg to Program Files>Szabi>CubeLauncher and over write the existing file. It can be any 240x320 jpg you prefer.
When you install the CubeLauncher, you also get a CubeConfig program which lets you customize any of the 5 faces of the 'Cube' which is relally a 5-sided prism or polyhedron. Screen shots of each face are included along with one transitional rotation captured.
TouchFlo has been on of the hottest topics around the forum with nearly every device scrambling to cook it into ROMS. Up to now, cooking was necessary as the base applications from the HTC Touch are dll driven. Since this application is Flash(tm) enabled, there is no need for booting with the dll's.
Launching from the home screen is much like the HTC Touch, with an UPWARDS swipe of the finger from the bottom or middle part of the screen. Sides are rotated forward and back with sideways swipes as you would intuitively expect. You can also open and close the cube with a single stylus poke in the bottom center of the screen. Close from the home screen by touching the lower right signal bar.
The first page is a 6 application program launcher followed by a twelve slot phone contacts photo gallery on page two. Page three is a 6 app media page while page four is primarily for MS Office Apps. Page five is yours to play with.
The developer's web site is in Chinese, but the translation indicates that trials of the demo and feedback are welcomed. You can download the demo at the following Link: Http://rapidshare.com/files/54065589/Szabi-CubeLauncherICON.rar
It is not a finished work (yet) but it is getting close. Please provide your thoughts and interest so the the Project Team can assess wether or not to work on this for our devices. As you will see, we can easily do more with VGA quality backgrounds and icons, but the basics are definitely there.
Kind Regards to the Developer
guau! looks very nice! thanks bro!!!!
Nice find...
Hi raskell.
Excellent find! We'll look into this...for sure.
raskell said:
http://blog.yam.com/leo2016/article/11682010
(...)
The home background is a bit suggestive, so if you would like to avoid that image, copy the attached bg.jpg to Program Files>Szabi>CubeLauncher and over write the existing file. It can be any 240x320 jpg you prefer.
(...)
Click to expand...
Click to collapse
I prefer the original one... hmmmm
The program... Great finding.... the program... yes, and the wallpaper.
mackaby007 said:
Hi raskell.
Excellent find! We'll look into this...for sure.
Click to expand...
Click to collapse
yes we will. nice find
Any idea if this works at 128Dpi ? My eyesight isn't what it used to be (says he leaning on his zimmer frame)
Nice find, thanks for sharing.
Pawel062 said:
yes we will. nice find
Click to expand...
Click to collapse
Did you try?
I would like if it is compatible with ROM Black Touch AP2
If you need not change the dpi i am all up for it!
would someone be super kind and put on a direct link or something else than rapid share, coz i can't use that from my company
Installed on my X7500 WM6 ITA with 96dpi setting, here they are my considerations:
1. Graphic should be improved with an appropriate resolution of images used to build the interface. (I hope I can do it by maself)
2. Scrolling works well even if touching feedback should be more reactive on striping finger over display
3. Not all the applications link work. I hope I can customize by myself
4. Home screen works fine, images resolution apart.
Nothing I can say about RAM and battery usage...still testing it.
Confucious said:
Any idea if this works at 128Dpi ? My eyesight isn't what it used to be (says he leaning on his zimmer frame)
Nice find, thanks for sharing.
Click to expand...
Click to collapse
Tested with 128 DPI Settings and it looks and works the same, regardless of the font. Some of the demo apps are not set to the correct file links, however using the CubeConfig module, this is easily corrected. I just went through each screen and tested what worked an what didn't, then ran the CubeConfig and changed the broken links. Again, this is an (Alpha Demo) but it is working!
Bother! Was hoping you would say it didn't work
I really should know better than to install beta software, let alone alpha!
Can I resist trying it......
probably not !
Thanks
raskell said:
Tested with 128 DPI Settings and it looks and works the same, regardless of the font. Some of the demo apps are not set to the correct file links, however using the CubeConfig module, this is easily corrected. I just went through each screen and tested what worked an what didn't, then ran the CubeConfig and changed the broken links. Again, this is an (Alpha Demo) but it is working!
Click to expand...
Click to collapse
Tested with 192 DPI settings and it looks and works the same...
Does it work in WM5?
satanisme said:
Does it work in WM5?
Click to expand...
Click to collapse
Everything I have seen and know about this, YES, it should work fine in WM5. I do not have a WM5 device configured at present so I haven't tested it there. If you do test it, report back please so others can know this as well.
very nice app, with lots of potential,
I just get " Unexpected error in CubeLaunch.exe"
All I have installed is the Szabi CubeLauncherICONB.cab - do i need to install somethoing else?
Confucious said:
I just get " Unexpected error in CubeLaunch.exe"
All I have installed is the Szabi CubeLauncherICONB.cab - do i need to install somethoing else?
Click to expand...
Click to collapse
yes flashlite
when you reset a notify icon will appear bottom right click it too see the cube.
oh btw the original developer is on XDA
this thread looks very promising.
http://forum.xda-developers.com/showthread.php?t=328010
Whenever I hit the icon I get a "Not supported Landscape mode yet;"
I have tried to uninstall then reinstall but still get the same message. Any ideas? Using the X7500 on 128dpi. Thanks
iCaller v0.1.0.3 alpha
Simple CallerID application which extends system default Incoming Call screen with full-sized pictures, additional contact information and fully customized interface.
Currently, it is an alpha version, which means that it may contain bugs and do not work correctly on some devices. Please give me the feedback, I'll be fixing issues.
You may get it also at my new home site
Features:
- Lightweight
- Expands default incoming call screen without affecting its behavior
- Full-sized contact picture
- Pictures can be stored on a Storage Card or in Pocket Outlook database
- Picture can vary for the same contact depending on its phone number (just name the picture with a number, e.g. 5554433.jpg)
- Customized interface based on HTML (using system HTMLView control, thanks for idea goes to mrproper)
ToDo:
- Screen lock functionality
- Speed improvements
- Bugfixing
Instructions:
- Unpack contents of the archive in a folder on your device, e.g. \Program Files\iCaller (do not forget to copy zlibce.dll too!)
- Check settings.ini - it is configured for English version of Windows Mobile OS, you may need to replace sSysCallerWndTitle option from 'Phone - Incoming...' to your localized name of system default Incoming Call window
- Launch iCaller.exe
For detailed instructions refer to readme.html
Note!
Stop and restart iCaller each time you modify the settings.ini file!
Thanks will test with manila about time just a simple fullscreen caller
Does not work with manila 2D as the manila caller id cuts Icaller out also the call delay is much worse on my 5-6 times before ring is herd ?
wapvirus said:
Thanks will test with manila about time just a simple fullscreen caller
Does not work with manila 2D as the manila caller id cuts Icaller out also the call delay is much worse on my 5-6 times before ring is herd ?
Click to expand...
Click to collapse
Haven't tested with Manila yet. Probably it will require modifying sSysCallerWndClass and sSysCallerWndTitle options in settings.ini to properly hide Manila CallerID. I'll investigate the delay issue too. Thanks for the feedback!
mmh, this is a feature that is build in s2u2 allready (runnes on any device, fullscreen), so where is the different if this is ready?
So this might only be usefull if there is really someone out there who does not use s2u2 , (maybe throttlelock users)
bluemetalaxe said:
mmh, this is a feature that is build in s2u2 allready (runnes on any device, fullscreen), so where is the different if this is ready?
So this might only be usefull if there is really someone out there who does not use s2u2 , (maybe throttlelock users)
Click to expand...
Click to collapse
In fact, I've installed S2U2 and uninstalled it two days after, didn't like the weight and functional overload. So it's up to users to decide
truburt said:
In fact, I've installed S2U2 and uninstalled it two days after, didn't like the weight and functional overload. So it's up to users to decide
Click to expand...
Click to collapse
Not to forget that iCaller works usefully on Smartphones whereas I, for one, have never gotten anything working with S2U2 on a Smartphone. Plus it's lightweight and since you're using the HTMLViewer that means it's also pretty configurable.
I've got a few ideas myself on themes for it...!
Kermit Woodall
Managing Editor
GadgetNutz.com
I assume you can put this in the startup drawer/folder or put a .lnk to it there to start this everytime the phone starts?
Kermit Woodall
Managing Editor
GadgetNutz.com
You say its customizable with graphics..Is this a whole skin/theme ability or just replacing already existing files ?
And is it possible to have gfx for tapped state as well ? And transparent PNG files ?
If so, I would be really interested in skinning it (once its stable and fast ^^).
And, maybe I get this wrong but what do you mean by "screen lock functionality" ?? Sounds like S2U2
regards,
Martin
mmh, its lightwight, of course because it has not much functions, so wait two weeks and we will see because it seems that there is a lock function coming too
The other thing is that you need this and a screenlocker application and a volume control application and and and. with s2u2 you can disable parts of programm. Just my thoughts about another calleer iD.
But maybe usefull for non touch devices or other lockers, as i said.
hey Schmidler, Oesterreich gehoert wieder zu Deutschland *kleiner Spass aus Bayern
Running it on ATT Tilt, stock 6.1 rom, with HTC Home Plugin. Works great so far. I like the HTML layout, it can be customized quite easily.
I have been looking for something like this for a while now, I'll test some more and report back.
yes, S2U2 already got a lot of functionality, but its true that it´s memory intesive.
[OFF-TOPIC] @bluemetalaxe: xD ja klar, Deutsches Reich nichwahr kennst ja hoffentlich http://www.youtube.com/watch?v=wGPGSyCreJA [/OFF-TOPIC]
athis is exactly what I have been looking for for a long time!!!
огромное спасибо!
Going to try on my wizard to see how it works. hopefuly it will rescale my outlook contact photos to something more reasonable.
edit:
Here is a smaller picture for the no caller id.
it is saved as a 2color png in 8bits
weighs less than a kb as oposed to the 7kb in the one you posted.
(This should make a lot the difference with speed as well)
bluemetalaxe said:
mmh, this is a feature that is build in s2u2 allready (runnes on any device, fullscreen), so where is the different if this is ready?
So this might only be usefull if there is really someone out there who does not use s2u2 , (maybe throttlelock users)
Click to expand...
Click to collapse
I'm not using S2U2 or ThrottleLock, and I do find this application could be very useful.
truburt said:
In fact, I've installed S2U2 and uninstalled it two days after, didn't like the weight and functional overload. So it's up to users to decide
Click to expand...
Click to collapse
i have to agree with you.. S2U2 is heavy and pointless for some people. i don't use it and nor need it. I'll be using iCaller, no doubt about it.
thanks
pilgrim011 said:
I'm not using S2U2 or ThrottleLock, and I do find this application could be very useful.
Click to expand...
Click to collapse
I think that the big difference is that it is so lightweight.
You can have as many pictures as you want for your people on storage card without making PIMVOL as huge as mine (1.5mb) and only for few contacts!
can you immagine if I had pictures for ALL of my 200+ contacts??? that would probably add up to 5mb!
Hi Burt,
Installed on my HTC Touch on program files , but still getting the small screen with the picture on the background.
How do i get rid of the small old screen showing the number & get only the new full screen.
thx.
here is what happened on my wizard:
installed ran testcalled from a friends phone.
at the top of the screen I got 3 pictures (same ones from my outlook. under it the blue screen. under that the standard windows mobile bubble.
I think that there needs to be some kind of a scaling engine for outlook photos. at least double size. and the background needs to change from the scarry blue to a black or very dark grey.
looking forward to an update. thanks for trying to tackle a problem that many cant seem to care about
truburt said:
iCaller v0.1.0.2 alpha
Click to expand...
Click to collapse
many many thanks for sharing this useful application, I attach italian.lng (rename .txt in .lng) for Italian users.
I'm trying to change the font size in default theme to have it bigger, but I don't know which value I have to write instad of "{ font-size: large; }"
Thanks in advance.
Ciao, Andrea
Genius2000 said:
many many thanks for sharing this useful application, I attach italian.lng (rename .txt in .lng) for Italian users.
I'm trying to change the font size in default theme to have it bigger, but I don't know which value I have to write instad of "{ font-size: large; }"
Thanks in advance.
Ciao, Andrea
Click to expand...
Click to collapse
I just found how to change the font size "{ font-size: 180%; }", now I would like to change also the font color, any hint?
Ciao, Andrea
S.V.I said:
here is what happened on my wizard:
installed ran testcalled from a friends phone.
at the top of the screen I got 3 pictures (same ones from my outlook. under it the blue screen. under that the standard windows mobile bubble.
I think that there needs to be some kind of a scaling engine for outlook photos. at least double size. and the background needs to change from the scarry blue to a black or very dark grey.
looking forward to an update. thanks for trying to tackle a problem that many cant seem to care about
Click to expand...
Click to collapse
this is exactly what happened to me
[ROM][VZW][12.27.08]VZ Nav ROM 2.1-lllboredlll P2 GPS Edition-(WM6.1 CE OS 5.2.20931)
PLEASE SEE POST #2 for issues / FAQ's.
Its here!
Ok, I updated the ROM with Bored GPS phase two technology to bring you the easiest and fastest way to get GPS running on your XV6850. The instructions have been updated for use. Only MAJOR change besides asthetics is how you launch the GPS fix. I made it a little simplier ;c) See updated instructions below!
I also added some eyecandy, fancy icons in taskbar, battery percent over battery icon in 1% increments.
Preface::
This ROM is based on the eRice kitchen like my last couple ROM's. It has a modified version of the llllBoredllll GPS Fix. I modified it to create a link to PPST.exe in Programs -> Navigation -> Installation. In that folder you will also find three other installers for the latest version of Google Maps (with the new feature set)and Live Search. All tested and working with GPS locks usually under 60 seconds.
Details:
OS / Kitchen:
eRice TP Kitchen v1.03.7 [SYS OS 5.2.20931 Build 20931.1.5.0] with my Verizon OEM Pack
- Removed -
JetCet Printing (I will upload CAB later or someone else can)
Older Opera 9.5 from Stock VZW ROM
NETCF 2.0
TF 3.0 - Large Start Menu / Large Title Bar (I will upload CAB later or someone else can)
HTC Diamond SIP (soft keyboard). Only has regular MS keyboards for memory reasons.
+ Added +
*NETCF 3.5 - Faster than 2.0 and now the standard from the eRice Kitchen
*Apps
Opera 9.5 build 2649 (Has zoom slider!)
iContact Burt Edition 6.4.5 (finger friendly contact chooser, iphone-ish)
HTC YouTube From kitchen
Latest Google Maps and Live Search. They are fully upgradeable to new version with out any issue!
*Utilties
TF3D Config - Modify TF3D settings and themes
Diamond Tweak - Modify many system settings
Advanced Config 3.3 - Modify even more system settings
nueFonts - Change fonts and sizes. Trebuchet and Calibiri look great!
SPB Back up - Great back up app. 5 free uses.
A black themed psShutXP - Utility to soft reset
HTC Network Plug in from Kitchen
*Sensor
Gyrator - Utility to rotate screen automatically in any app
Diamond Hologram - Cool 3D sensor app that simulates a hologram
Seismo - Nifty program to simulate a seismograph using motion sensor
*NEW- Glite - Control the dimming of the back light utility
*Tweaks
Minor system tweaks for performance and usability
US Weather Database (If your city is not there then I apologize in advance)
ORIGINAL HTC Manilla with FULL aninmation. Not your daddy's TTF3D any more! Removed internet, music, and photo tabs. Can be added back in using TF3D Config included)
Contacts mapped to left softkey on Home screen.
Internet Sharing
*GPS Fix
Bored GPS Phase 2 is incorporated for the easiest of use
Live Search (Dont ask me about UPGRADEABILITY when they release a new app we will worry about it THEN!!!)
Google Maps with street view (Dont ask me about UPGRADEABILITY when they release a new app we will worry about it THEN!!!)
*Free Memory on boot
With TF3D running = 65 Megs
Without TFD Running = 71 Megs
Instructions UPDATED 27 Dec 08:
1. Flash phone - Phone flashes and autorun kicks in and then reboots.
2. Phone now displays welcome center and you click on screen to continue. No need to calibrate, I did it for you ;c)
3. Next hit start -> Programs -> GPS-> lllboredlll GPS fix.
4. Select OK to proceed with update. When that is finished select OK when prompted to reboot.
5. Now Dial *22899 and activate. Phone will reboot on its own.
6. Now we need to enable GPS in windows and verify the PRI update worked. Start phone by pressing green button. You will need to make a call to do this. Dial your voice mail. It should ring in to it no problem and the carrier should stay VZW on the screen. Now click Menu -> Options -> Serivces Tab -> Location Settings -> Get Settings -> Location On -> OK ->ok
7. DONE!
At this point you are done and GPS is unlocked. You can start installing the included GPS apps if yiou choose.
**The included apps have been modified to put the shortcuts in the Navigation Folder under programs. They are the latest versions respectively as of 20 Dec 2008 11:49PM Central Time. They can be uninstalled later to accommodate updated software! Don’t ask in the thread because you will look really silly as I have answered the question here.
Installing Live search and Google Maps then making them compatible, Step by Step!
How to set up Live Search
Start-> Programs -> GPS -> Live Search
Select Menu -> Settings. Arrows Done to GPS COM0 and change it to GPS COM4. Select Done
Now select Map. This brings up the default map. Next turn on GPS by pressing Menu -> Center on GPS.
It can take a few minute for a first fix. After that it much quicker. I also recommend toggle Center GPS on and back off again if it doesn’t pick up in under 90 seconds as a matter of fact the program will force you to. If it forces you to then click Ok then toggle “Center on GPS” off then back on and it will lock quickly! First lock is always hard on fresh flash. After that you should be good to go.
How to set up Google Maps
start -> Programs -> GPS -> Google Maps
Select Menu -> Options -> GPS Settings
Select Set manually and then arrow down and select COM4 then change baud rate to 4800. Now click ok.
Now Select Menu -> Use GPS and you will then lock on!
How to set up TomTom 7
Just install and run. It configures on its own. Atleast ver 7.45. I am running it without issue.
Remember: Be patient! It may take a couple soft reset to get it to work but it will. Trust me. Worse case scenario I had with a flash was I had to try twice in Live search then exit live search, toggle location off and back on, restart Live Seach and it locked instantly. Most of the time it will lock on the second try. Its been about 90% consistent under 60 seconds for me. A brand new phone took only two tries with live search and it got it within 15 seconds on the second try.
Note 1: This was done on a brand new in Box XV6850 straight from the VZW store and worked as stated above. These were also conducted using the stock Radio. This was done in the office basement of my house completely below ground. These are results are repeatable as I have don’t them at least 25 times now on two different phones.
Note 2: I have not applied anyother fix to my phone other than the steps listed above. I have not applied the aGPS fix either.
Downloads: www.scottcrosler.com
One last thing to remember, this is the ROM I run on my phone. I am sharing because I like to not because I have to ;c) This is not a full time job for me but I put in more hours on these forums than 40 hours a week! hehehe.... THANKS!!!!!
THis post reserved for future growth!
1. Carriers other than VZW are discouraged from trying the ROM. I cannot honestly tell you what would happen which is the ONLY reason I would discourage it. I am on VZW with a VZW phone. If you wanna send me one of those fancier models I woull gladly test it for you ;c)
2. I will eventually post cabs for Large start Menu and Large title bar. There are 100's of them out there. If someone can grab them I will post them on this post. Any help on this is great. I dont have time to look around for things i dont use and I got another project going on that will keep me busy most of tonight and tommorow. So once again, if you have these cabbed up already grab them and post them PLEASE!
Bugs
1. SYM key does not work right now. More than likely because Diamond Sip is gone. I have not confirmed only taken the report.
2. Pictures on Pic tab (disabled by default) dont flick up or down. I have not confirmed only taken the report.
3. TF3D is reported to not take special customizations. This has been reported but not exp by myself. I will look into it.
Thanks a lot. Can't wait to try it out. Downloading now!
Works great and the graphics improvements are really cool. When I boot I have 62.59 MB free! As always, thanks for all of your hard work on this.
Mike
I've gotta tell you story about this gps guy who was hacking away at pri's and chit. Well he decides to load up this new SUPER SWEET rom you posted and he sure did think it was nice. As he plays around installing and testing things, he decides to fire up the gps (you know that thing he's been all over for weeks). For some reason it wouldn't connect. So he goes searching and searching to see whats going on. After about 5 minutes or so he has a light bulb kick on in his weary weary head. he forgot to turn the location on..... hahahahahaha what an idiot.....
Nice ROM Dude!!!!!!!!!!!!!!!!
lllboredlll said:
I've gotta tell you story about this gps guy who was hacking away at pri's and chit. Well he decides to load up this new SUPER SWEET rom you posted and he sure did think it was nice. As he plays around installing and testing things, he decides to fire up the gps (you know that thing he's been all over for weeks). For some reason it wouldn't connect. So he goes searching and searching to see whats going on. After about 5 minutes or so he has a light bulb kick on in his weary weary head. he forgot to turn the location on..... hahahahahaha what an idiot.....
Nice ROM Dude!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Its ok, I did the same thing. I was making an instructional video for GPS use.... All was well untill after a minute I timed out. I was like.... WTF?!>?!>
Well GPS was off.... Can you write it into the next cab to turn it on automaticaly or should I just put that in to the kitchen tweaks? Up to you?
mmcgough said:
Works great and the graphics improvements are really cool. When I boot I have 62.59 MB free! As always, thanks for all of your hard work on this.
Mike
Click to expand...
Click to collapse
Yeah, this is the bet one SO FAR.......... hehehehe
Thanks for this new ROM.
I flashed to it and have noticed that are better than expected! WOOHOO!
I did that the Diamond Keyboard is not on of the SIPs loaded. Is this something that you did on purpose?
I have 63.10 MB free on first boot but I after running Opera and checking around, the memory dropped to 59.18 MB. Pretty awesome!
I love the skin for PSShutXP. Completely matches the TF3D theme.
I have tried to get the GPS running but not having much luck. I will keep trying but I was getting mixed results with the last ROM. I live in Brooklyn NY so I would expect that aGPS will be the best option for me as there are too many things going on here for un-assisted GPS to get a solid lock. Oh well.
Thanks for working so hard on all this for us!
Thanks for the update, I'm downloading now....very excited!!
RonMac said:
Thanks for this new ROM.
I flashed to it and have noticed that are better than expected! WOOHOO!
I did that the Diamond Keyboard is not on of the SIPs loaded. Is this something that you did on purpose?
I have 63.10 MB free on first boot but I after running Opera and checking around, the memory dropped to 59.18 MB. Pretty awesome!
I love the skin for PSShutXP. Completely matches the TF3D theme.
I have tried to get the GPS running but not having much luck. I will keep trying but I was getting mixed results with the last ROM. I live in Brooklyn NY so I would expect that aGPS will be the best option for me as there are too many things going on here for un-assisted GPS to get a solid lock. Oh well.
Thanks for working so hard on all this for us!
Click to expand...
Click to collapse
****, forgot to put that I stripped out SIP. I will update first post. Thanks for the reminder.
Sip is like 6 megs of Ram and really doesnt do a damn thing that the normal MS SIP does other than take up more screen space. To me a keyboard is a keyboard..... Doesnt have to be pretty just A-Z and some numbers and symbols ;c)
EDIT: about your being in NYC... I have heard time and time again people in NYC cant get locks, any big city with tall buildings and lots and obstructions actually. Try to get into an area where you dont have much around. Once you get that first lock... Its all cake from there....
RonMac said:
I love the skin for PSShutXP. Completely matches the TF3D theme.
Click to expand...
Click to collapse
I modded it to take out a logo and the word Diamond Shutdown. Its the OEM from PPC geeks with my Special Touch ;c)
I just noticed one thing. Not sure if it was intended or not. When I go in to the touchflo picture viewer and go full screen, I can no longer "flick" the pictures. It wont let me do anything with the pictures. Like I said, I dont know if that was intended or not, but I thought that I would let you know if not.
Mike
I noticed that Clear Type can no longer be selected/deselected. No big deal for me just wanted to let you know. Also noticed that my SYM key on the physical keyboard does not do anything.
I also noticed the landscape settings as well.
This ROM is AWESOME!
Is there any place I can get the keyboard BTW. I like using it better than the standard SIP.
Thanks
scrosler said:
Its ok, I did the same thing. I was making an instructional video for GPS use.... All was well untill after a minute I timed out. I was like.... WTF?!>?!>
Well GPS was off.... Can you write it into the next cab to turn it on automaticaly or should I just put that in to the kitchen tweaks? Up to you?
Click to expand...
Click to collapse
I'm actually looking into which is best right now. I guess a kitchen mod is about the easiest. If I do it in a cab I've got to delete the key then install the key. From what I've tried so far it will make a double entry.
I was outside tonight after posting the last few times and tried the HTC GPS tool to see if anything was getting through.
I was able to get up to 7 used but I couldn't get any fixed.
I ave it set to Q7500, cold start, 4800 and com 4.
I will keep trying to get a lock but...
RonMac said:
I was outside tonight after posting the last few times and tried the HTC GPS tool to see if anything was getting through.
I was able to get up to 7 used but I couldn't get any fixed.
I ave it set to Q7500, cold start, 4800 and com 4.
I will keep trying to get a lock but...
Click to expand...
Click to collapse
Dont screw with the startig method. Just leave it as default. ONLY change the chip type.
Also, if you "use" that many and cant lock sounds like a nice quick soft reset will fix the problem. Most of the time anyway. Could be a funky driver issue.
lllboredlll said:
I'm actually looking into which is best right now. I guess a kitchen mod is about the easiest. If I do it in a cab I've got to delete the key then install the key. From what I've tried so far it will make a double entry.
Click to expand...
Click to collapse
Ok, I can help either way of course. Let me know what works for you on th next release.
mmcgough said:
I just noticed one thing. Not sure if it was intended or not. When I go in to the touchflo picture viewer and go full screen, I can no longer "flick" the pictures. It wont let me do anything with the pictures. Like I said, I dont know if that was intended or not, but I thought that I would let you know if not.
Mike
Click to expand...
Click to collapse
Nope, lets call that a bug! I'll check into it. But maybe this version doesnt have that. I doubt it though.... i will figure it out.
RonMac said:
I also noticed the landscape settings as well.
This ROM is AWESOME!
Is there any place I can get the keyboard BTW. I like using it better than the standard SIP.
Thanks
Click to expand...
Click to collapse
I'll TRY to cab it up but dont expect miracles! Aaaahahahahahah. You can grab the kitchen files I just posted and recook with that as an Option.
Hi Guys, here is my first attempt at making an App for the HTC HD2.
There are 3 sounds for each character, 4 for Vader. Keep selecting the character to select the next sound.
This will only work for touch screen devices, i haven't included any code for 4 way button phones.
Hope you like it.
Bollux.
<edit>
Hi all, here's version 2.
I've listened to the requests and added some extra buttons after selecting the character, and hopefully fixed the install to Storage Card option.
Works on my HTC HD2. Should now install to %instdir%\Program Files\StarWarsSounds\ by default.
Regards
Bollux.
WOW! Thank you!
I'm so over the moon with this. I was really hoping someone would do one. Fantastic picture interface, so much fun!!
When you said it was your first app I thought it was going to be really basic - but it's absolutely great. You should post some screenshots!
There just seems to be a minor issue with the sizing of the Luke icon at the bottom that's causing scrollbars to appear on my HD2.
Cheers,
Ian
Screen Shots
Thanks, Here's a Screen Shot on the test Device.
Not sure why the sliders are there, the code to show the pictures should only fill the available screen size. I used the me.width and me.height parameters. The icons are a much better fit on the HD2 screen 480x800.
Vb code used,
PictureBox8.Image = StarWarsSounds.My.Resources.Luke_lg
PictureBox8.Height = (Me.Height)
PictureBox8.Width = (Me.Width)
All the icons are sized with similar code to fit width and height.
'Luke
PictureBox8.Image = StarWarsSounds.My.Resources.Luke_sm
PictureBox8.Height = (Me.Height / 4)
PictureBox8.Width = (Me.Width / 3)
I did take out the keyboard icon toolbar, that shouldn't be there..
Bollux.
bo11ux said:
Not sure why the sliders are there, the code to show the pictures should only fill the available screen size. I used the me.width and me.height parameters.
Click to expand...
Click to collapse
Just ran it again and can't recreate the issue I was having (the Luke icon was stretched off screen). It's working fine now. I'll keep playing and see if I can work out a consistent way that recreates it (or maybe it was just my phone going a little loony!)
Minor thing, but I notice that if you tap multiple times (even when a pic is showing?) it queues up all the tap events - it would prob be nicer if it just played one sound at a time and blocked the event listener until a sounds has completed if that makes sense. (Accidental taps cause it to go on a while)
hehe - even the icon in the start menu is cool
Cheers,
Ian
Nice work keep on making more ones!
Not working...
Hi,
being a StarWars Fan for years, I just had to try your app, but doesnt work.
I see the graphics, but when I tap on a picture, I just get a short "beep" and the pic is flashing.
I can play the sounds via MSMediaPlayer w/o probs.
Using Tosh TG01, WM 6.5.5, NetCF3.7
Maybe you find a solution, would really love to use this little prog.
"May the force be with you"
Installed to device memory, still had plenty of space.
I have the latest netcf on an hd2, and I cannot really hear anything.
I see the main screen, click on any character, I see what is a brief flash of a bigger picture (with associated scrolbars around), that lasts a splitsecond, but then the program goes back to the standard view, and all in all i can hear anything.
I can open the files in resources folder ok with nmedia player tho
Hi bo11ux!
Nice Idea! Do you plan to do some Star Trek / Babylon 5 / Battlestar Galactica version of your work? Would love to see that!
Thanks,
Future
installed " STAR WARS SOUNDS " on on my
..hd with 6.1 stock rom ..(storage card )..
no problem .... working smoothly..!!
thank you ,
willcor
ephestione said:
Installed to device memory, still had plenty of space.
I have the latest netcf on an hd2, and I cannot really hear anything.
I see the main screen, click on any character, I see what is a brief flash of a bigger picture (with associated scrolbars around), that lasts a splitsecond, but then the program goes back to the standard view, and all in all i can hear anything.
I can open the files in resources folder ok with nmedia player tho
Click to expand...
Click to collapse
I have same problem.
Maybe you use reg edit for non sound notification if change volume system/call ring volume.
[HKEY_CURRENT_USER\ControlPanel\volume] key mute get more than 1
After this i hear the sounds from SW
I have that same problem. Just a short flash of the picture and a little beep. Hope someone has a solution to fix this.
thanks
works great on my sprint diamond wm 6.1 stock rom
hehe, i like this - well done
Thanks, my son will love this! Installed on LG iQ (GW825) in memory, using COM2(21901) custom rom from Dark. Works great!
Works well on my HD2 with stock Telstra 1.72 Rom & Manila 2.5.2012. Worked even better once I took the phone off silent. Oops!! Nice work
Tested and works well in HTC Touch HD.
ephestione said:
Installed to device memory, still had plenty of space.
I have the latest netcf on an hd2, and I cannot really hear anything.
I see the main screen, click on any character, I see what is a brief flash of a bigger picture (with associated scrolbars around), that lasts a splitsecond, but then the program goes back to the standard view, and all in all i can hear anything.
I can open the files in resources folder ok with nmedia player tho
Click to expand...
Click to collapse
same here, i´m using a htc hd2 device with newest german vodafone rom.
g*p
Try this regkey change, I have same problem and now i can hear the sounds.
[HKEY_CURRENT_USER\ControlPanel\volume]
key "mute" get more than 1, i have there "7"
I have HTC Topaz, but i thing that on HD2 it was similar.
Great app, I like the Star Wars apps! But I have also that problem: just a short flash of the picture and a little beep.
I have a HTC Touch HD with WM6.5. I hope someone can fix this.
mandala1 said:
Try this regkey change, I have same problem and now i can hear the sounds.
[HKEY_CURRENT_USER\ControlPanel\volume]
key "mute" get more than 1, i have there "7"
I have HTC Topaz, but i thing that on HD2 it was similar.
Click to expand...
Click to collapse
Just changed from 3 to 7, but I now hear a beep. But apart of the sound, it works on my diamond, so also VGA.
Platform: Windows Mobile (Tested on 6.5.x)
Overview: A simple Check List application
* Organized by Categories
* New / Modify / Delete Category
* New / Modify / Delete Item
* Move Item to Vault / Restore Item from Vault
* Touch friendly
* Included Desktop Companion (PC application)
* No Master Lists!
* No Descriptions / Notes
* No Quantities
* No Item Pictures
* No Prices
* Without many functions and options
JUST A FRIENDLY CHECKLIST!
Download (old) 1.1 VGA version
Download 2.1 (W)VGA version
Download Desktop Companion version 2.1
Changelog v2.0 :
- Fixed the WVGA resolution.
- The Splash Screen was Changed.
- The user can change the order of the Categories / Items
- Settings Panel added
- The Program now can keep the Backlight On (option)
- The user can change the Item (list) height (option)
- The user can change the Text size (option)
- The user can enable/disable the message dialogs (option)
- The user can enable/disable the splash screen (option)
- The database is saved only if changes detected.
- The graphic files was retouched.
- Many minor bug fixes.
Changelog v2.1 :
- added gray boxes
- fixed category problem
- fixed minus problem (-)
- Marks by default the first Category
- Marks by default the first Item in the selected category
- Many minor bug fixes.
First Impressions
I just discovered this app and thought I'd leave my first impressions. Here goes...
At first go it's just what I've been looking for: a simple checklist app. It seems to be just that. I wouldn't say it's immediately intuitive, but with some messing around I picked up the basic routine. As with all things, with a little more playing around it will become 2nd nature. You should be aware, however, that the screen doesn't render properly in landscape (my phone is a TP2 [WVGA] see details in sig). As such, I couldn't confirm compatibility with the hard keyboard on my device.
Also, something to consider for future development, would be a way to create a link for a specific list that can be placed in one's calendar/appt editor. This probably takes away from the simplicity aspect, but that would be really slick!
I'll play with it some more throughout the week, but for simplicity's sake I like what you've put together -- at least on 1st impressions. Thanks for sharing!
thank you very much for your comments
Dadi68 said:
Platform: Windows Mobile (Tested on 6.5.x)
Overview: A simple Check List application
* No Master Lists!
* No Descriptions / Notes
* No Quantities
* No Item Pictures
* No Prices
* Without many functions and options
JUST A FRIENDLY CHECKLIST!
Click to expand...
Click to collapse
...really simple, really friendly ... but: that is what I really need, it's quick, it's easy....it's GREAT (you're right: keep it simple!!!)
It works on HD2, no prob with keyboard...
I hope, that you are buying soon a new device, to develop a WVGA-Version...aäh, whats about a wrap-up or second row for longer entrys ?
THX and greetz
fast_zorro said:
...really simple, really friendly ... but: that is what I really need, it's quick, it's easy....it's GREAT (you're right: keep it simple!!!)
It works on HD2, no prob with keyboard...
I hope, that you are buying soon a new device, to develop a WVGA-Version...aäh, whats about a wrap-up or second row for longer entrys ?
THX and greetz
Click to expand...
Click to collapse
Do u want to be a beta tester of the 1.2 version? (its wvga compatible - i hope)
Thanks to fast_zorro's valuable help, a WVGA version is coming!
ETA : this weekend
short video for the app
...9.....8....7.....6....
..thanks god, it's friday....
fast_zorro said:
..thanks god, it's friday....
Click to expand...
Click to collapse
Good morning dear beta tester
Today I will make a new version of the desktop companion and tomorrow morning I will release the full package
Im thinking to add an "enable single tap" option but i dont know because its not so friendly...
Anywayz, I will send you the released package via email - megaupload
Have a nice Friday people!
Dadi68 said:
Today I will make a new version of the desktop companion and tomorrow morning I will release the full package
Im thinking to add an "enable single tap" option but i dont know because its not so friendly...
Click to expand...
Click to collapse
May I leave some friendly feedback?
(I'm going to assume you said "yes"...)
First of all, allow me to repeat that this is a great little app. Simple and useful. Further, you have shared it with us freely, and I'm the first to acknowledge "beggars can't be choosy." With this in mind, I offer the following...
The boot time is too slow. One would think that given how light-weight this app is, it should load much like an immediate toggle on/toggle off application. While you're deserving of the credit appearing in your 'welcome'/'boot' screen, perhaps eliminating this feature would speed the load time? Even if it would not speed the load, I would like to see the Category menu straight away without an extra screen to pass through.
Second, it would be nice if Categories, and not just Items, could be saved to the vault. (Am I missing something?) It would be nice to create a simple template to the vault, then be able to copy a version to the active menu which could be applied as needed. Make sense?
Lastly, would it be possible to move the command bar down a centimeter or so? That way 4 full Category/Item panels could be visible w/o having to scroll up/down. I understand it's placed to accommodate ergonomic thumb usage, but to see 4 full Item panels, as opposed to 3 1/2, would be worth the slight stretch...
I'm really looking forward to a WVGA version as I'll be able to use the keyboard on my TP2, which would make this even MORE useful!
Once again, many thanks!!!
p.s. - There's also a couple of spelling errors in the menu guides. 'Aproove' comes to mind right off. ('Approve' is correct) However, your English is far superior to my Greek, so I have no room to criticize...
Minnesinger said:
May I leave some friendly feedback?
(I'm going to assume you said "yes"...)
First of all, allow me to repeat that this is a great little app. Simple and useful. Further, you have shared it with us freely, and I'm the first to acknowledge "beggars can't be choosy." With this in mind, I offer the following...
The boot time is too slow. One would think that given how light-weight this app is, it should load much like an immediate toggle on/toggle off application. While you're deserving of the credit appearing in your 'welcome'/'boot' screen, perhaps eliminating this feature would speed the load time? Even if it would not speed the load, I would like to see the Category menu straight away without an extra screen to pass through.
The boot time is extremely slow... Its not my fault... This programming language is slow (even a "Hello world" takes 3-4 secs to load)
In the new version you have the option to disable the splash screen
Second, it would be nice if Categories, and not just Items, could be saved to the vault. (Am I missing something?) It would be nice to create a simple template to the vault, then be able to copy a version to the active menu which could be applied as needed. Make sense?
Why you make your life so difficult?
Lastly, would it be possible to move the command bar down a centimeter or so? That way 4 full Category/Item panels could be visible w/o having to scroll up/down. I understand it's placed to accommodate ergonomic thumb usage, but to see 4 full Item panels, as opposed to 3 1/2, would be worth the slight stretch...
In the new version you can adjust the row height of the items/categories
I'm really looking forward to a WVGA version as I'll be able to use the keyboard on my TP2, which would make this even MORE useful!
Wait 30 minutes...
Once again, many thanks!!!
You r welcome my friend
p.s. - There's also a couple of spelling errors in the menu guides. 'Aproove' comes to mind right off. ('Approve' is correct) However, your English is far superior to my Greek, so I have no room to criticize...
Please help me to correct them... My English suck...
Maybe I will release the new version in Greek
Click to expand...
Click to collapse
Thank you very much for your post
Dimitris
Version 2.0 added at first post
Thanks to fast_zorro for his valuable help on the WVGA support
Minnesinger said:
May I leave some friendly feedback?
Second, it would be nice if Categories, and not just Items, could be saved to the vault. (Am I missing something?) It would be nice to create a simple template to the vault, then be able to copy a version to the active menu which could be applied as needed. Make sense?
.
Click to expand...
Click to collapse
...not bad, I'm also think about this topic...but, keep in mind the important issue: "small and easy".
I think, these is the most benefit from this app, so any new features should be aware of this point before added.
(MASPWARE Checklist, as example, looks nice, but you could be very easily lost in categories and items in up to 4 stages of deep)
But you're right, there are some improvents possible - let's see, what others will say and give Dadi68 a chance to enjoy the summer before making a version 3.0...
fast_zorro said:
...not bad, I'm also think about this topic...but, keep in mind the important issue: "small and easy".
I think, these is the most benefit from this app, so any new features should be aware of this point before added.
(MASPWARE Checklist, as example, looks nice, but you could be very easily lost in categories and items in up to 4 stages of deep)
But you're right, there are some improvents possible - let's see, what others will say and give Dadi68 a chance to enjoy the summer before making a version 3.0...
Click to expand...
Click to collapse
Hahahaha run DaDi RUNNNNNNNNN
2 weeks left for vacations guys
Ok, add categories to vault...
you mean an empty cateory or a category full of items?
I started to like that idea
Dadi68 said:
Ok, add categories to vault...
you mean an empty cateory or a category full of items?
I started to like that idea
Click to expand...
Click to collapse
Yes, a category full of items: a template. For example, a simple agenda template...
A template of the user's own design could be kept in the vault. In my case, there are occasions when I don't need to use a full appointment editor; I just need to keep a running list of contacts and times for any given day. Instead of retyping the time increments over and over, a blank agenda is always at the ready!
Although, this brings up another issue for me:
Whenever I attempt to edit one of the time slots on my agenda template, I get the warning seen in the pic above. I have the current-most NETCF v35 on my device, in addition to the NET CF v35 Messages.EN.wm .cab: am I missing anything? If I click 'yes' I'm able to continue and add a contact to a time slot, but the error message repeats with each edit.
Looking for ward to watching your app evolve -- Thanks!
Minnesinger said:
Yes, a category full of items: a template. For example, a simple agenda template...
A template of the user's own design could be kept in the vault. In my case, there are occasions when I don't need to use a full appointment editor; I just need to keep a running list of contacts and times for any given day. Instead of retyping the time increments over and over, a blank agenda is always at the ready!
Although, this brings up another issue for me:
Whenever I attempt to edit one of the time slots on my agenda template, I get the warning seen in the pic above. I have the current-most NETCF v35 on my device, in addition to the NET CF v35 Messages.EN.wm .cab: am I missing anything? If I click 'yes' I'm able to continue and add a contact to a time slot, but the error message repeats with each edit.
Looking for ward to watching your app evolve -- Thanks!
Click to expand...
Click to collapse
Replace the [-] with [...] and it will work fine!
About the Category -> Vault ...gimme some time, maybe next week
great tool - thats what i'm looking for. THX!!
Look nicely, I will try this program out.
Guys a beta 2.1 is out, that supports grayed checkboxes...
Im waiting for comments from my dear beta-tester
@Minnesinger : Can you help me by correcting spelling errors? To fix them before release the new version?
@All :
To Do:
1. Store full Categories (with items) into Vault [ NEXT WEEK ]
Have a beautiful weekend people!
Dadi68 said:
@Minnesinger : Can you help me by correcting spelling errors? To fix them before release the new version?
Click to expand...
Click to collapse
Yes, of course. I would be happy to. Check your PMs and I'll attach a Word document with a complete list. Although, from what I've observed there are only a few minor things...