Please help me! I have Qtek 9090
rom 5.35.03.wwe
rom date 11/02/06
radio 1.15.00
protocol version 1337.45
model ph20b
When I activate my wlan, the left green light will blink, but there is nothing happening any more. It is so in 2 days. I have upgraded to wm5. But nothing helps. Soft and hard reset. I have tried to activate BT and turn it off.
What can I do to fix it?
Best Regards,
Guus from Holland
Related
I have been using WM2003SE for almost 2 weeks now, and I am very satisfied with it.
I have one problem though with the BT headset. The BT headset AND the speaker on the phone is always on, when in a call. It has the advantage of being able to make conversations in stereo (phone on one ear and headset on the other) Apart from that, it is rather annoying because it seems like the microphone in the phone is the only active microphone (the receiving end is complaining of difficulties of hearing me, when I get away from the phone).
How do I become able to switch between the phone and the headset again?
BT headset: Jabra 250
PDA: Qtek 2020
ROM: 2.02.t1WWE
Radio: 1.18.00
Protocol: 1337.38
ExtROM: 1.72.125 (not sure witch)
Regards Steen
i'm using jabra 200 and works fine with me. try pairing again with the device.. it might works
Thank you for the sugestion - but I have tried that - without any luck
/Steen
I'm having this problem too with my motorola HS810 headset.
I'm sure it wasn't like this at first though. I've installed bluetooth tools and tried re-pairing, everything I can think of (except a hard reset - I guess thats next though).
What apps do you have installed, perhaps we have some in common and that's causing the problem?
This never happen to 220CHS :twisted:
I'm getting the same issue with my HBH-600!
The CHS ROM, i thought this was Chinese....can i install as english?
Different ROMs
Hi guys!
Looks like some of you are using two different ROM versions, 2.02t and 2.06.
Only the first one supports, finally! the hands free profile, with the inconvenience of playing "stereo" when a headset is identified as "hands free".
The 2.06 version, does not support handsfree at all, so I discarded it after a bit of testing in my machine.
(Can't help with CHS versions, sorry)
For more info read my thread in BT carkits.
Hope it helps.
:roll:
Had the same problem. After 3 hard resets and trying a different BT headset I finally found that installing Bluetooth Tools fixed the problem. will try it out tomorrow and see if it works OK.
Anyone has any experience with the jabra bt250? I was wondering if it would work with our XDA IIs. I THINK it would but I am hesitant to cough up $$ just to see. The jabra website doesn't even have the XDA IIs up at all and they aren't returning my emails.
Hi,
I have a MDAIII and the Jabra BT250 and it works allright... I am not to pleased about the distance you can put your phone to (about 1-1.5" meter) for excellent sound.
YES
I originally got a Jabra FS-258 on a trip to Singapore last October. It was the best brand on review everywhere and I was looking to play around with bluetooth on a SE T68i -- worked great. On an upgrade to the SE K700i seems I lost the single touch call functionality (must be the phone firmware). I'm not using it with my XDA and it works fine except for the initial noise as reported here -
http://www.my-xda.com/downloads/Other_Bluetooth.pdf
The work around is easy. On initial pairing you'll hear the noise as the Jabra tries out to interface, press the Jabra's talk on/off button to disengage. Succeeding calls have been clear at least for me. I was using the old 1900 drivers.
Have now just upgraded to the official 3500 drivers but have not had time to re-test changes. Will post here sometime or if anyone asks again....
On another note, I'm also looking for a way to extend music up the Jabra in other forums. Anyone found the link or the correct way to upgrade the ROM, etc?
I recently charged up the headset with the 3500 patch and voila! no initial noise!
Will continue to do tests this week and mention if it returns or something else.
Now, on to having music piped through it .....
Doesn't work for me
Hi,
You guys are having more luck than me. I have an M2000 from Orange UK. The Jabra 250 will pair with the phone, but when it tries to connect it just times out. Any idea why?
Re: Doesn't work for me
pletharoe said:
Hi,
You guys are having more luck than me. I have an M2000 from Orange UK. The Jabra 250 will pair with the phone, but when it tries to connect it just times out. Any idea why?
Click to expand...
Click to collapse
what's your jabra and rom build versions? have you upgraded the bluetooth stack (links are all over the place for the 3500).
I don't know any details about the Jabra, apart from that it is a freespeak 250 which I bought the other day from "The Link" in York (England).
I have installed:
OEM_WWE_124_008.sa.CAB
OEM_Patche_12100401.sa.CAB
I got the links from:
http://forum.xda-developers.com/viewtopic.php?t=15078
Now the headset will connect, but with really poor sound quality. It's strange, I get a better signal when the phone is facing away from the headset, but even then it's only useable at a max range of about 2 feet.
Jabra 250 problems
Hi everyone!
I'm new here.
I just purchased iMate PDA2K EVDO (CDMA) and paired it with my Jabra 250 with no problems. Made a few calls, it worked perfectly.
On that first day, my battery died completly. When I charged the battery, Jabra couldn't connect with iMate.
I wiped it of from the list of paired devices, and tried unsuccesfully to pair it again, and again, and again.
Called support and did a SW reset, but still was unable to pair the Jabra afterwards.
Anyone knows what's going on and how to tackle the problem?
I've been told that I have the leatest SW version
ROM version: 2.03.00 WWE
ROM date: 12/15/04
Radio version: HA01_140
Protocol version: AA3.3.301
PRL version: 00205
ExtROM version: 2.03.111 WWE
Hardware version: 0041
p.s. I can't for some reason put my iMate details on my profile.
Cheers
scorpiox
Jabra 250 headset is fine, been using it for a few weeks now.
However when you lose pairing, try this:
Remove the pairng from the blue angel, switch the Jabra 250 off, switch the jabra back on and HOLD it for about 8 seconds untill the light is blue constantly. Now pair it again in the bluetoth manager and enter the pin-code 0000. Should be fine.
PS If you can, upgrade to the 1.10.00 Radio and bluetooth 3900. It killed the static crackle for me, before I was having earaches.
--------------------------------------------
ROM 1.31.00WWE
Radio 1.10.00
Protocol: 1337.391
ExtROM: 1.31.135WWE
BT 1.0.0.3900
Exact Procedure to Bond XDA IIs to Jabra FS 258
Hi Guys,
I'm so frustrated already I wanna stomp my Jabra. I have loaded the new broadcomm 3900 BT driver and I still can't get my FS 258 to bond to my IIs. Can someone provide me an idiot's guide please? It just won't authenticate with my FS 258 no matter what settings I configure!
Thanks alot!
Bah!
Followed all this and my bt250 still crackles big style on an o2 xda iis.
Newbie question.
I've successfully connected a Moto hs850 BT headset to my O2 XDA 2s. Problem is, I can make outgoing calls no problem but when others call my phone, neither the XDA 2s nor the headset rings... the caller goes straight through to my voicemail.
Phone works fine when the bluetooth is off.
I must be missing something. Consulted the manual and trawled this site but cannot find the answer.
Any help out there?
ROM 1.12.62 WWE
Radio 1.02.00
Protocol 1337.32
ExtROM 1.12.178 WWE
What version of BT Manager are you running? i think 3900 is the latest and can be found here. Also the Radio Rom 1.02 is pretty old as well; I would upgrade to the latest BT manager and go from there.
Moto HS850
Thanks for that.
I've upgraded the radio to 1.13 and the BT to 3900. Now I can call out and receive calls no problem except for one MAJOR pain in the ass...
When the device goes into standby mode, a received call will not wake up the device and reconnect the BT headset in time to answer the call - I have to answer it via the device green button. I've looked through the forum and found that a few people have had this problem. I realise that not going into standby mode burns up the battery more quickly but I'm hoping for a way to get a compromise... i.e. standby for the screen and the processor, but bluetooth and the headset connection still active.
I've yet to upgrade my ROM to 1.31 (from O2 UK/IRL) or 1.40 if I figure out how to rejig the iMate ROM for my XDA. Has anyone had any experience of a ROM upgrade helping (or worsening!) this problem.
Better yet - anyone have a workaround?
Your advice is much appreciated...
hiya,
bit new to all this, so some advice from you guys is needed!
what are the best options for the m1000?
not sure if there are different versions of the phone so give you as much detail as i can find?
cpu intel pxa263
speed 400mhz
ram 128mb
model ph10a
the main app i need is excel, plus a prog to print via ir to my dj450 printer(have been using printpocketce)
hope i have not missed anything important??
thanks in advance
there are 2003SE roms wm5 roms wm6 early roms
personaly if your device works as it should now i prob would leave it alone as i cant say if printing would work with later roms
thanks for the reply!
cant say its been working well?...had a few random hangs from time to time and there has been times where you get a call no ringtone heard and no way to answer it? h/ware buttons didnt work,touch screen button flashes like its been pressed but still didnt answer
only way i found to sort it out was a soft reset
so the main reason for the upgrade was an improvement in phone function rather than a printing issue?
think the main question i meant to ask really was which is the most stable version for this type of phone,most of the bugs sorted out?
thanks again
upgrading time got error in spv m1000 help please
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
voltesep said:
thanks for the reply!
cant say its been working well?...had a few random hangs from time to time and there has been times where you get a call no ringtone heard and no way to answer it? h/ware buttons didnt work,touch screen button flashes like its been pressed but still didnt answer
Click to expand...
Click to collapse
Had a lot of hanging, on my M1000, but after upgrading to the WM2003SE WWE, the speed of the machine has improved a lot, and it does no longer hang, allmost no matter what I do.
I found that some of the build in Orange apps were the reason for "hangtime" and slowdowns, because if I tryed to install them, from the original Ext-ROM, all the problems came back.
So my experience is, that "Genuine English WM2003 SE " http://forum.xda-developers.com/showthread.php?t=230279 is a major improvement, to the Orange standard WM2003
I upgraded my SPV M1000 from Orange ROM to WM5 and now to Tofclock WM6 ROM, and it works fine. All features are ok for me, it's great!!!
thanks for the reply guys
would like to try tofclock wm6, if im going to do it may as well go the whole hog!
does anyone know if you can print via ir in office on wm6?...or am i going to need some more software??
Hello,
I've flashed my hermes with the official wm6 rom. 3.54.256.2
My rom version is 1.47.00.10.
But i've a wifi problemm, i can connect to my router only if i'm 2 meter far. If I go downstairs my hermes didn't detect the wifi. My other pda the HTC touch detect it in all the room of the house.
Can you help me.
Thanks
OK MEN
Lets see
"R" is not ROM version
is Radio Version and yes you are 1.47.00, but let me tell you that the radio GSM version is not the same to works for WIFI so... the WIFI works with his self radio version installed by default in every device that uses this kind of WIFI waves... the two i know are 802.11B and G but this is not the problem ok these are only protocols....
The matter is that maybe you have a hardware issue... I has a Universal with this same problem exactly this problem and.... let me tell you that the anthena for wifi was unexpected removed and when I diassemblied the device it pops up (I said GOD Damn where does this comes from Ba!!!!!! its not important) i left it and lost the little piece of metal so.... search for the WIFI ANthena diassembly your device and watch it by yourself or take your device to the technician....
Thanks for your help.
Ok i'm not affraid of opening my device.
Have you got a picture or an help to tell me where's the wifi anthena.
At the adress there is picture of a open Hermes can we see anthena.
Thanks angain for your help
Do a search using the words "HTC service manual hermes". You should find instructions on how to pull apart and put you Hermes back together with no problems. Use a size 6 torque key, a flatbladed screwdriver and you won't need the philips head screwdriver.
Cheers...