I checked it for Ameo and it worked out
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Change the thickness of scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 9 (DWORD decimal)
Change the length of scrollbar arrow buttons
For the horizontal (bottom) scrollbar arrows:
HKLM\System\GWE\cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxHScr = 9 (DWORD decimal)
Is there any possibility to eliminate the trybar marked with red by acting on reg?
asci said:
Is there any possibility to eliminate the trybar marked with red by acting on reg?
Click to expand...
Click to collapse
that's what i was trying to do as well, no solution found so far......
Solution was not so far:
http://forum.xda-developers.com/showthread.php?t=248968&highlight=traybar
asci said:
Solution was not so far:
http://forum.xda-developers.com/showthread.php?t=248968&highlight=traybar
Click to expand...
Click to collapse
can someone confirm this works? when I connect to Active Sync with bluetooth, the icon still appear in the tray
Founded on french site : http://www.ppccool.com/index.php?showtopic=6465
http://www.ppccool.com/images/Iomega HTC ATHENA SystemTray 1.jpg
jas_pik said:
Founded on french site : http://www.ppccool.com/index.php?showtopic=6465
http://www.ppccool.com/images/Iomega HTC ATHENA SystemTray 1.jpg
Click to expand...
Click to collapse
actually i have post the file here somewhere already, but thanks anyway.
wu5262, do your dopod have that tray to?I haven't that on my dopop?
cornelius said:
wu5262, do your dopod have that tray to?I haven't that on my dopop?
Click to expand...
Click to collapse
haha, i don't have them on initially, it's on when for example PHM is on, or Active Sync is on, basically, anything that put a icon on tray will activate my tray, and my problem is i don't want that tray, and i remove it. I guess in your case you want to activate the tray, just simply put an icon there, for example activate tray icon for Pocket Infrormant, then your tray will appear.
Thank's wu..
I installed this twice and now I have multiple icons for it. How do I remove an icon or icons in this case,from the programs folder? Somehow I also have multiple GPS Now and camera icons too.
Any help would be appreciated.
Later..............
hdbueller said:
I installed this twice and now I have multiple icons for it. How do I remove an icon or icons in this case,from the programs folder? Somehow I also have multiple GPS Now and camera icons too.
Any help would be appreciated.
Later..............
Click to expand...
Click to collapse
there are several programs that scans for double links or icons but they are not free you can remove the double icons yourself it is easy to do:
1. open Filesexplorer
2. Map to Windows\Startmenu\programs
3. remove the mutiple icons from there
Mahmood said:
there are several programs that scans for double links or icons but they are not free you can remove the double icons yourself it is easy to do:
1. open Filesexplorer
2. Map to Windows\Startmenu\programs
3. remove the mutiple icons from there
Click to expand...
Click to collapse
Thanks alot....that was what I needed to know. I kept looking for a way to do that,but I forgot about the start menu......I appreciate the help.
Later............
**********MODERATION
Don't click on any of the junk above. It's all SPAM and trash. Must not have had a date tonight so he resulted in spamming the forum. LOL
I use the utility from vijay that does the same job. It is good because you can adjust the size of the top bar as well. Google for the following name : vjtoggletodayiialpha
Related
There are many task managers floating around out there, with lots of neat features and great UIs. I've been looking for a good replacement for the HTC Task Manager home screen button that no longer works properly in Windows Mobile 6.5.x, and I've been unable to find one I really like. So I made my own!
SCREENSHOTS AND DOWNLOADS ARE >>HERE<<
ArkSwitch can be opened from any screen that has the top bar visible - I tried to make it simple yet unobtrusive.
You can click the text of an app to bring it to the foreground, click the icon to view the App Info screen, or click the "X" image to close it.
Please see the changelog in the second post.
Important info for chefs and customizers: http://forum.xda-developers.com/showpost.php?p=8002276&postcount=733
And a quick CAB to disable the Close All confirmation dialog.
I ASK FOR YOUR HELP:
If you are using ArkSwitch in your ROM, please post a message here telling me so. I would really like to know. Also, if you make themes, please post them here for everyone else to enjoy. I would appreciate that.
Also, if you're a developer and would like to help with implementing any features, I'd be glad to accept your patches, changesets, etc.
HOW TO USE:
1. Install the CAB.
2. Either reboot (it will run on startup) or start it from the start menu --> Tools.
3. Click the left half of the top bar (or other area if customized) to bring it up.
CUSTOM THEMES:
SimpleGloss Blue | Dusk | NinjaBlack | Purple Pimp | SRG | Hacienda | Showtime7
Why doesn't ArkSwitch show process memory information anymore? Read the answer here.
Historical notes:
v1.0.0 --> 350
v1.0.1 --> 1700
v1.0.2 --> 2739
v1.0.3 --> 1582
v1.0.4 --> 2831
If you'd like to donate, please use the following link:
CodePlex page | Download link
ArkSwitch has been tested on VGA and QVGA by myself, and WVGA. It should work on FWVGA as well, although I don't think any WinMo device with that resolution exists at this time.
CHANGELOG:
[v1.2.0]
- FIX: Shortcut creation (was fixed in an unofficial v1.1.4a release earlier)
- ADD: Quickly killing the foreground app by "scratching" the activation field!
- ADD: German translation
- ADD: More registry tweaks, including one to disable the "Close All" confirmation
[v1.1.4]
- FIX: Couple of bugs with the new process mode
[v1.1.3]
- FIX: Much better stability in general
- FIX: Better handling of frozen apps (thx MichyPrima)
- CHG: Theming now allows for resolution-aware dynamic image selection (see config.xml for more info)
- ADD: Global memory info is back
- ADD: Process listing - swipe horizontally on the main task list page to see it (thx MichyPrima)
[v1.1.2]
- FIX: Crash/freeze in certain situations
- REM: All memory reporting features, probably only temporarily
[v1.1.1]
- FIX: Stupid crash encountered in some unique situations
[v1.1.0]
- FIX: Some apps/windows not appearing when they should be
- CHG: Running as high priority in order to be able to close misbehaving apps
- ADD: THEMING SUPPORT!
- ADD: Source code
[v1.0.4]
- FIX: Double tmail.exe (and others) listing in certain situations
- CHG: Reverted back to X button instead of OK button for the main ArkSwitch screen
- ADD: Memory usage percentage
- ADD: Experimental memory usage efficiency index on the App Info page
[v1.0.3]
- FIX: Various QVGA issues
- FIX: Free/total RAM refreshing when closing apps (more info)
- CHG: Icon rendering now does proper transparency
- CHG: ArkSwitch's main window X button is now an OK button so that other apps don't try killing it
- ADD: Internationalization support (more info)
- ADD: Activation field location customization
[v1.0.2]
- FIX: Overlap issue with certain themes
- CHG: gwes.exe and shell32.exe are now hard-excluded (i.e., not a choice)
- CHG: Close Task button is now Close All
- ADD: Manila to default exclusion list
- ADD: Options screen
- ADD: Color-coded free/total RAM info on the bottom
- ADD: Read app icons from start menu (caveat)
[v1.0.1]
- FIX: Resize icons that are too big
- FIX: Always open ArkSwitch when executed after it's already running
- ADD: App details screen
- ADD: Exclusion functionality
- ADD: Standard app mode (see below)
[v1.0.0]
- Original version
TODO/WISH LIST FOR FUTURE VERSIONS:
Possibly add Alt-Tab-like functionality for switching to other apps using a HW button
Add free or used RAM percentage, in parentheses or configurable
Possibly take over X button to close apps instead of minimizing? Maybe even the start button?
As possible alternative to the above, have second activation field that kills foreground apps
Prevent ArkSwitch from turning on when device is locked
Possibly add an icon bar for common tasks on top?
Suggestions?
WILL NOT LIKELY HAPPEN:
Making ArkSwitch into a service - it's pointless - see this post
WM6.5 compatibility mode:
In case you don't want ArkSwitch to take over your top bar, you can disable that functionality and thereby have it function as a standard app. In this mode, the original WM6.5 should also be fully functional. To enable this mode, either do it in the Options screen, or manually set the following Registry value:
[HKCU\Software\ARKconcepts\ArkSwitch]
TaskbarTakeover = 0 (DWORD)
Thanks Ark
Great Work
Can I use program with soft-buttons? And can i remove it from bar? Because i'm using WKTask at same plañe?
P.S. Òû ðóññêèé?
Yes, you can use the program with softkeys. You can select apps by using the D-Pad and then the left softkey to close it or the right softkey to open a menu which will let you switch to it, close it, view the about screen, or quit ArkSwitch.
The only way to "remove" ArkSwitch from the top bar is to close it. One of the main reasons I chose the top bar is ease of access. If something else goes there, then this app can't be accessed easily anymore. I've never used WkTask, but from what I'm reading about it, it looks like the two apps would be incompatible with each other, sorry
P.S. I speak Russian as I'm originally from Ukraine. Please don't use CP1251 for Russian encoding, US browsers don't like it Unicode is better.
looks great! but QVGA please ??
Rows were overlapping eachother.
The the program crashed when I chose exit from the menu and I was forced to soft-reset.
Runnning WinMo 6.5 on a Touch Pro 2
Arktronic said:
Yes, you can use the program with softkeys. You can select apps by using the D-Pad and then the left softkey to close it or the right softkey to open a menu which will let you switch to it, close it, view the about screen, or quit ArkSwitch.
Click to expand...
Click to collapse
I was wrong in my question. Can I put the launch ArkSwitch on softkey?
(My english very bad, isn't it?)
working good
so far so good on my Whitestone (Imagio) 6.5
1. question- is my regular taskmanager (upper most right hand corner) still supposed to function? bc i loose the little icon and get no response from pressing there. wasn't sure from your description if they both were supposed to function at the same time.
2. my device is wvga and i did not have overlap issues like a previous post.
3. the x's all work good and switching between apps works good.
4. pressing softkey\menu\quit arkswitch exits the program and it has to be restarted. "X"ing the upper right minimizes? is that correct?
5. oh yeah- and touching the upper left is working good to open ArkSwitch.
6. Thank you. I have been looking for a simple solution for a finger friendly task manager.
Really quick program, working pretty good!
I do have 2 requests though, which would make it perfect
I am on a 6.5.3 wvga device and I have some icons overlapping the text... maybe you can crop/stretch all icons to a specific size?
and another request, could you implement a way to exclude processes from showing in arkswitch? like start.exe etc?
Really well done so far!
pavel-auto78 said:
I was wrong in my question. Can I put the launch ArkSwitch on softkey?
(My english very bad, isn't it?)
Click to expand...
Click to collapse
point the button towards \..\program files\arkswitch\arkswitch.exe that works for me.
EDIT: well, the button doesn't work all the time, I think it has something to do with what program is in focus or something...
guess that adds a 3rd request... sorry to a pain in the ass
Possible X of windows mobile (down right) = close ?
Nice work ! Thanks Arktronic.
deepthroat said:
looks great! but QVGA please ??
Click to expand...
Click to collapse
I still have my old Hermes. When I have a chance, I'll flash a WM6.5.x ROM on it and get that working. It's on the TODO list
toadlife said:
Rows were overlapping eachother.
The the program crashed when I chose exit from the menu and I was forced to soft-reset.
Runnning WinMo 6.5 on a Touch Pro 2
Click to expand...
Click to collapse
Obviously you didn't read my first two posts. This application is NOT for the original WM6.5! Only for 6.5.x, where the start and X keys are on the bottom of the screen. However, if you'd like to use it as a regular task manager started by a hardware button or something similar, that could be done in the future through an options screen, which is also on the list.
pavel-auto78 said:
I was wrong in my question. Can I put the launch ArkSwitch on softkey?
(My english very bad, isn't it?)
Click to expand...
Click to collapse
Please see above. And if you're not sure if your English text is good, you can also say it in Russian next time
maisonpulaski said:
so far so good on my Whitestone (Imagio) 6.5
1. question- is my regular taskmanager (upper most right hand corner) still supposed to function? bc i loose the little icon and get no response from pressing there. wasn't sure from your description if they both were supposed to function at the same time.
2. my device is wvga and i did not have overlap issues like a previous post.
3. the x's all work good and switching between apps works good.
4. pressing softkey\menu\quit arkswitch exits the program and it has to be restarted. "X"ing the upper right minimizes? is that correct?
5. oh yeah- and touching the upper left is working good to open ArkSwitch.
6. Thank you. I have been looking for a simple solution for a finger friendly task manager.
Click to expand...
Click to collapse
1. ArkSwitch does not touch the right half of the taskbar at all. I'm not sure which task manager you're using, though.
2. Right, because you're actually using WM6.5.x as opposed to toadlife...
3. Great, that means I can say WVGA works!
4. Correct. Would you like me to add an "Are you sure?" dialog when quitting?
5. Yay!
6. You're welcome
jodeltje said:
Really quick program, working pretty good!
I do have 2 requests though, which would make it perfect
I am on a 6.5.3 wvga device and I have some icons overlapping the text... maybe you can crop/stretch all icons to a specific size?
and another request, could you implement a way to exclude processes from showing in arkswitch? like start.exe etc?
Really well done so far!
point the button towards \..\program files\arkswitch\arkswitch.exe that works for me.
EDIT: well, the button doesn't work all the time, I think it has something to do with what program is in focus or something...
guess that adds a 3rd request... sorry to a pain in the ass
Click to expand...
Click to collapse
Hmm, I guess if an icon is bigger than I tested with, it would overlap. I'll add that to the list. Can you give me an example of which app(s) had overlapping icons please?
Excluding processes is already on the TODO list.
Yeah, starting the program multiple times doesn't always bring it to the front. You have to have opened the ArkSwitch window at least once before it could do that. I'm not sure why that's happening; I'll look into it some more. It's definitely a bug that should be fixed.
fotone said:
Possible X of windows mobile (down right) = close ?
Click to expand...
Click to collapse
I'm not entirely sure how to do that, actually. If any WinMo devs with experience on this would like to point me in the right direction, I'd appreciate it
Thanks for your feedback, everyone!
Arktronic said:
Hmm, I guess if an icon is bigger than I tested with, it would overlap. I'll add that to the list. Can you give me an example of which app(s) had overlapping icons please?
Click to expand...
Click to collapse
I've customized some "iReflect" icons with "JWMD Icon Changer".
hope this helps.
Are you sure that the overlapping icons are the customized ones? Because it looks like JWMD only changes the start menu icons, while ArkSwitch looks inside the actual EXE to find its icon.
Arktronic said:
Are you sure that the overlapping icons are the customized ones? Because it looks like JWMD only changes the start menu icons, while ArkSwitch looks inside the actual EXE to find its icon.
Click to expand...
Click to collapse
oops your right, it shows the original icon... it was task manila... the program...
Okay, that makes sense. Thanks for your feedback!
By the way, I've added a to-do list to the second post.
Works perfect on Tilt 2. THanks a lot!
working for me on 6.5
Arktronic said:
I still have my old Hermes. When I have a chance, I'll flash a WM6.5.x ROM on it and get that working. It's on the TODO list
Obviously you didn't read my first two posts. This application is NOT for the original WM6.5! Only for 6.5.x, where the start and X keys are on the bottom of the screen. However, if you'd like to use it as a regular task manager started by a hardware button or something similar, that could be done in the future through an options screen, which is also on the list.
4. Correct. Would you like me to add an "Are you sure?" dialog when quitting?
!
Click to expand...
Click to collapse
A. I misunderstood "for 6.5.x" as meaning 6.5 and above. Just to let you know i am running plain old 6.5 and my start button still works in the upper left corner.
B. The ArkSwitch button works as well in the upper left corner.
C. Maybe 6.5 compatibility explains why the original task manager doesn't function with ArkSwitch?
4. I would definitely would not want you to add an "are you sure". I hate those.
Hope the feed back helps and is not annoying.
ArkSwitch works on QVGA device
Arktronic said:
Please see above. And if you're not sure if your English text is good, you can also say it in Russian next time
Click to expand...
Click to collapse
Спасибо за работу.
I have WM 6.5 with M2D.
Where can I change the backlight, change ring/vibrate (without using side keys) and how to know we have a lost call? (I dont have call history on first screen, I only have a button on taskbar...)
WM6.5 is very finger friendly, but there are some things like this that are annoying me
How to control the lock system ?
Maxxd01 said:
I have WM 6.5 with M2D.
Where can I change the backlight, change ring/vibrate (without using side keys) and how to know we have a lost call? (I dont have call history on first screen, I only have a button on taskbar...)
WM6.5 is very finger friendly, but there are some things like this that are annoying me
Click to expand...
Click to collapse
It depends on wich rom you are using but let's give it a try,
- Backlight: start/settings/system/power/backlight
- Change ring/vibrate: start/settings/personal/phone
- Change volume: with the side-keys on your phone, or on the topbar by touching the speaker (not in all versions) and for vibrate by pressing the # button on your keypad (not in all roms)
- lost call: You see a notification on your screen if you missed a call otherwise go to the dialer-menu.
There are more ways to get the same result, so go playing with your phone and you'll see it for yourself.
Hope I helped you a little bit in the right direction.
Greetz,
Rataplan said:
It depends on wich rom you are using but let's give it a try,
- Backlight: start/settings/system/power/backlight
- Change ring/vibrate: start/settings/personal/phone
- Change volume: with the side-keys on your phone, or on the topbar by touching the speaker (not in all versions) and for vibrate by pressing the # button on your keypad (not in all roms)
- lost call: You see a notification on your screen if you missed a call otherwise go to the dialer-menu.
There are more ways to get the same result, so go playing with your phone and you'll see it for yourself.
Hope I helped you a little bit in the right direction.
Greetz,
Click to expand...
Click to collapse
Thank you very much for you reply.
Ok two problems solved By the way, there's not a way to place a shortcut on "Programs" of anything of "Setting" ? Just for programs ?
One still to solve. The problem is: in my screen I dont have a line 'missed calls'. It's selected on M2DC but I just cant bring it. I tried aply themes from here:
http://forum.xda-developers.com/showthread.php?t=425974
Themes .cab dont work (png's over png's and so on), extracting .zip on \Windows same thing, and importing .m2CT crash M2DC Customizer. Have any idea how cant I change M2D Theme? (2.0.1920.1520 TouchFLO)
Maxxd01 said:
Thank you very much for you reply.
Ok two problems solved By the way, there's not a way to place a shortcut on "Programs" of anything of "Setting" ? Just for programs ?
One still to solve. The problem is: in my screen I dont have a line 'missed calls'. It's selected on M2DC but I just cant bring it. I tried aply themes from here:
http://forum.xda-developers.com/showthread.php?t=425974
Themes .cab dont work (png's over png's and so on), extracting .zip on \Windows same thing, and importing .m2CT crash M2DC Customizer. Have any idea how cant I change M2D Theme? (2.0.1920.1520 TouchFLO)
Click to expand...
Click to collapse
Hi again, for your programs make a shortcut of folderview.exe, you can find it in your windowsfolder and copy it to windows/start menu/programs.
The version of Touchflo you are using I'm not sure which one that is but if you want to learn more of m2dc just go to http://forum.xda-developers.com/showthread.php?t=427392&highlight=manilla
Hopefully you can find your answer there.
Regards,
Rataplan said:
Hi again, for your programs make a shortcut of folderview.exe, you can find it in your windowsfolder and copy it to windows/start menu/programs.
The version of Touchflo you are using I'm not sure which one that is but if you want to learn more of m2dc just go to http://forum.xda-developers.com/showthread.php?t=427392&highlight=manilla
Hopefully you can find your answer there.
Regards,
Click to expand...
Click to collapse
I think it's human mistake, maybe I'm forgotting doing something. I'll open a new thread once the one I have problems its closed.
Many thanks.
By the way, how to install that bottom bar we see in many WM6.5 ROMS? (With start icon, back button and X button but on the bottom).
Also how to get taskbar without start button ?
I saw many roms with and without, confused if its WM6.5 function or not.
Maxxd01 said:
By the way, how to install that bottom bar we see in many WM6.5 ROMS? (With start icon, back button and X button but on the bottom).
Also how to get taskbar without start button ?
I saw many roms with and without, confused if its WM6.5 function or not.
Click to expand...
Click to collapse
It seems that you have a thread only made for us, ok first of all, I don't mind to help you, but you have to read and search a bit more and if you don't know anything, you can always send me a pm, I don't mind at all.
Ok to get back to your question, it just depends on what rom you are using proberly you are now using the naked version from DJ, and that is a com 2 branch, it means that it don't have a bottombar, in my signature you see a rom I made and that is one with bottombar also DJ made beautiful rom's with bottombar just search for his threads.
Cheers,
Look's like there's any ROM where we can control the lock.
There's any way to make those rom's auto lock after backlight turn off ?
Maxxd01 said:
Look's like there's any ROM where we can control the lock.
There's any way to make those rom's auto lock after backlight turn off ?
Click to expand...
Click to collapse
There is an app for that - I have a link on my insomnia thread for the cab - here is the link to the thread - http://forum.xda-developers.com/showthread.php?t=542482
It allows you to lock the device when it goes to sleep or you switch off the backlight.
DT
d_train said:
There is an app for that - I have a link on my insomnia thread for the cab - here is the link to the thread - http://forum.xda-developers.com/showthread.php?t=542482
It allows you to lock the device when it goes to sleep or you switch off the backlight.
DT
Click to expand...
Click to collapse
Thank you.
I found another app but it was not working so I will try this one.
One more question regarding using WM6.5, on WM6.1, I had a Java (I think its JRE) to (for example) install gmail/app.
I saw on your ROM java blend. It's the same thing ?
Maxxd01 said:
One more question regarding using WM6.5, on WM6.1, I had a Java (I think its JRE) to (for example) install gmail/app.
I saw on your ROM java blend. It's the same thing ?
Click to expand...
Click to collapse
This is what comes with HTC devices and is a Java application - not sure whether all Java apps are compatible with it though.
DT
Hi Peeps!!!
I searched and searched and searched again but not found
Could someone tell me how can I make my 6.5.5 bottom bar TRANSPARENT (I want only the writing as "menu" "Phone" without Background or curtain)
I accept links, cabs, reg, tutorials....Women, beers.....Oups
Awaiting your answers.....
THE TRUTH IS....UP THERE
Mastakony said:
Hi Peeps!!!
I searched and searched and searched again but not found
Could someone tell me how can I make my 6.5.5 bottom bar TRANSPARENT (I want only the writing as "menu" "Phone" without Background or curtain)
I accept links, cabs, reg, tutorials....Women, beers.....Oups
Awaiting your answers.....
THE TRUTH IS....UP THERE
Click to expand...
Click to collapse
Tomorrow i can trying to make a cab for you! Pls remember me tomorrow.
I will wait too
what means transparent to you???
Background vom MainTab of Manilla, if you are using it?!
then look into the cookies hometab 1.8.5 ... there you can set the top and bottom bar from an Backgroundimage...
futureshock said:
what means transparent to you???
Background vom MainTab of Manilla, if you are using it?!
then look into the cookies hometab 1.8.5 ... there you can set the top and bottom bar from an Backgroundimage...
Click to expand...
Click to collapse
I'm talking about the buttons (Start, Phone, Menu on main page) not the background of these buttons.
As you see on my screenshot even if I change the BG, it doesnt change the button, so I got the edge, the curtain....
I only want to see the writing on my black Background
OR got buttons with full black skin without the edges
Dic3ptor said:
Tomorrow i can trying to make a cab for you! Pls remember me tomorrow.
Click to expand...
Click to collapse
Great looking for long time! Thanks!
all you need is a transparent .tsk file,unzip and copy to your windows folder then set in......
start menu>settings>home> transparent softkeys
it will change your top and bottom bars to grey i think,after you choose it just use whichever app it is you use to re-skin your softkey and taskbar area's
made a cab for us lazy folks
Not Working
Here the result after cab installation
Maybe another thing to do????
try this cab
Mastakony said:
Here the result after cab installation
Maybe another thing to do????
Click to expand...
Click to collapse
it doesn't automatically do it for you,after the cab install you must
{select start menu,select settings,in there select home,you will see a list of whichever rom your using .tsk files which will change softkeys,colors of taskbar softkey area,Select trans. softkeys in that list and select ok in bottom right corner,give it a few seconds and it will change the softkeys to transparent, ***note as i mentioned before it will turn the softkey area and the taskbar area to a grey color,also as i mention simply re-skin your taskbar area and softkey area and soft reset when prompted via whichever app you are using,after that you should have results like the ones i posted in the pic}
hope this is a better explanation of how to achieve the effect your looking for!
thanks
poyensa said:
try this cab
Click to expand...
Click to collapse
very good it is working
thanks a lot
Thx for all
It works!!!!
THX YOU FOR ALL!!!
THE TRUTH IS....DOWN THERE
You are welcome,
This cab is only a small change in the registry path:
HKCU\Software\Microsoft\Today\Toolbar\ToolbarIconBubbleButtonThemeImage changing the value to \Windows\HTCdefault_toolbarIconBubbleButton.png
After this cab installed, any template png format named HTCdefault_toolbarIconBubbleButton.png existing in windows folder of your HD2 will be used as button for the incons of the bottombar.
And exactly the same for the buttons of the texts, but using the value \Windows\HTCdefault_toolbarTextBubbleButton.png for the registry path HKCU\Software\Microsoft\Today\Toolbar\ToolbarTextBubbleButtonThemeImage
Of course if there is no png file with that name in \windows will be no buttons in the bottombar then
EDIT: this is the way it works in my HD2 with WM6.5.5
poyensa said:
You are welcome,
This cab is only a small change in the registry path:
HKCU\Software\Microsoft\Today\Toolbar\ToolbarIconBubbleButtonThemeImage changing the value to \Windows\HTCdefault_toolbarIconBubbleButton.png
After this cab installed, any template png format named HTCdefault_toolbarIconBubbleButton.png existing in windows folder of your HD2 will be used as button for the incons of the bottombar.
And exactly the same for the buttons of the texts, but using the value \Windows\HTCdefault_toolbarTextBubbleButton.png for the registry path HKCU\Software\Microsoft\Today\Toolbar\ToolbarTextBubbleButtonThemeImage
Of course if there is no png file with that name in \windows will be no buttons in the bottombar then
EDIT: this is the way it works in my HD2 with WM6.5.5
Click to expand...
Click to collapse
Da best solution cuz we don't have to change our theme...
Great idea, bro
THE TRUTH IS...UP THERE
help
Now the comm manager is looking very funny
It possible to show it complete ? With registry twek ? And change the size too .
Straitup27 said:
all you need is a transparent .tsk file,unzip and copy to your windows folder then set in......
start menu>settings>home> transparent softkeys
it will change your top and bottom bars to grey i think,after you choose it just use whichever app it is you use to re-skin your softkey and taskbar area's
made a cab for us lazy folks
Click to expand...
Click to collapse
Care to share that wallpaper, it's really nice
Straitup27 said:
it will change your top and bottom bars to grey i think,after you choose it just use whichever app it is you use to re-skin your softkey and taskbar area's
Click to expand...
Click to collapse
I just installed your cab (thanx!) and indeed the top and down taskbar areas became grey. How can I change them to black?
wow ive been looking for this for a long time, in installed it and looks very good! but when you are at a tab you will see the background thats to bad...
nevertheless good job!
Straitup27 said:
all you need is a transparent .tsk file,unzip and copy to your windows folder then set in......
start menu>settings>home> transparent softkeys
it will change your top and bottom bars to grey i think,after you choose it just use whichever app it is you use to re-skin your softkey and taskbar area's
[/IMG]
Click to expand...
Click to collapse
Thanks!!!!!!
Straitup27 said:
all you need is a transparent .tsk file,unzip and copy to your windows folder then set in......
start menu>settings>home> transparent softkeys
it will change your top and bottom bars to grey i think,after you choose it just use whichever app it is you use to re-skin your softkey and taskbar area's
made a cab for us lazy folks
Click to expand...
Click to collapse
tks man，ill just going to try！immediately！hoho
How to write under the quick link icon, the name of the shortcut. Somewhere I saw that but I unfortunately forgot where, and ask for days. Thank you in advance, and yes i use HD2 with stock rom (wwe) and CHT 1.8.5
Open CHT Editor (Menu Spft key on home tab), then choose 'Quicklink Settings', scroll down and set 'Hide text' to off.
It is switch to off i was try to switch of & on several times but nothig change text is no there i would like to be like on pic
is this what you're looking for?
28. Change QuickLink Display Names
If you don't like your Quicklinks display names being truncated and looking like for example "Resco Regi.." and would prefer it look like "Reg Edit" then you can edit the display names here: HKLM/Software/HTC/Manila/Home/x then edit the DispName.
(x = the quicklink position)
*edit* never mind, read wrong. yeah you should be able to change that in CHTEditor. If it doesn't work, maybe export your settings for CHT & then reinstall it.
theres a setting for "quicklinks" and "freelinks".......
make sure they are both on........
conantroutman said:
theres a setting for "quicklinks" and "freelinks".......
make sure they are both on........
Click to expand...
Click to collapse
he's using CHT 1.8.5
lol my bad,
sorry.....
mzobec said:
It is switch to off i was try to switch of & on several times but nothig change text is no there i would like to be like on pic
Click to expand...
Click to collapse
Yes CHT 1.8.5 sory if i dont wrote this, so is there aniway to do someting with text under quick link icons
Anibody can help meeee pls
Hi all,
You can have notification on screen by the use of an app, it's a temp fix until dev do something.
(See attachement for screenshot.)
You have to Download KLWP from playstore.
And You can Download this https://drive.google.com/file/d/11X9GXO4fW8vAtQDbG-aveUKKfB6ZkA9X/view?usp=drivesdk
Save it in internal storage under kustom/wallpapers
And import in the app(You need the pro version)
Like the second screenshot and enjoy.
Another one with icon little more big and cliquable so You can open directly from icon
https://drive.google.com/file/d/15krDUewsEVLnYyXbbaulA-HvGoDVeCq3/view?usp=drivesdk
With icon on top right clickable
https://drive.google.com/file/d/1aTq4cIgZPQjL1L-vSG4b7Fx8qz4fnjpn/view?usp=drivesdk
Crédit for finding this Masdacheri
Is the Pro version required? I'm getting an Import error source file not readable.
Thanks
Oh my bad i Just saw, yes You need the pro version for import from storage
thanks that help me alot
It does not work with the Pro version either. Seems to be an issue with the custom data file. Could you please reupload the sccreen Set?
thanks
Im getting this error. The steps I took are as follows:
Loaded the file through the app
Clicked on set as wallpaper.
Am i doing anything wrong?
thanks. just show on homescreen.
Thanks for the temporary fix . Idk is there possibility to increase the size of notification icons ?
How did you manage to load his template? I'm always getting an error message.
SatBandit said:
How did you manage to load his template? I'm always getting an error message.
Click to expand...
Click to collapse
Load Preset in KWLP pro and click on the window named notification appears . Give the required permissions. and voila!
Madmax02 said:
Hi all,
You can have notification on screen by the use of an app, it's a temp fix until dev do something.
(See attachement for screenshot.)
You have to Download KLWP from playstore.
And You can Download this https://drive.google.com/file/d/11X9GXO4fW8vAtQDbG-aveUKKfB6ZkA9X/view?usp=drivesdk
Save it in internal storage under kustom/wallpapers
And import in the app
Like the second screenshot and enjoy.
Crédit for finding this Masdacheri
Click to expand...
Click to collapse
Thank you very much for sharing this! I've never heard on KLWP before today
anvesh583 said:
Thanks for the temporary fix . Idk is there possibility to increase the size of notification icons ?
Click to expand...
Click to collapse
Yes everything is editable including icon size. Instead of having the small icon centered, I enlarged them, vertically stack them on the left. Also making them clickable to launch their respective app
SatBandit said:
How did you manage to load his template? I'm always getting an error message.
Click to expand...
Click to collapse
Load Preset > Exported (tab) > select the kustom wallpaper
Got it. Thanks a lot
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
BTW, is it possible to only have 1 notification per App? I'm getting Icons for every Email or WhatsApp I receive.
Thanks this is looks nice :good::good:
posthumous said:
Yes everything is editable including icon size. Instead of having the small icon centered, I enlarged them, vertically stack them on the left. Also making them clickable to launch their respective app
Click to expand...
Click to collapse
Please share!!
posthumous said:
Yes everything is editable including icon size. Instead of having the small icon centered, I enlarged them, vertically stack them on the left. Also making them clickable to launch their respective app
Click to expand...
Click to collapse
Any tutorial on how to do this? Best that I could do is expand notifications upon tapping lol
I'm also interested in Customizing
is it also possible on lockscreen? i only manage to get it working on homescreen...
I put in op à second one with icon little more big and cliquable. And on on the right of the screen
If i have little time to take some screenshot on how to customize i Will post.
But dont know if i can explain well my english is little old lol
For the lockscreen maybe look this way
https://play.google.com/store/apps/details?id=org.kustom.lockscreen
Thanks
Madmax02 said:
I put in op à second one with icon little more big and cliquable. And on on the right of the screen
If i have little time to take some screenshot on how to customize i Will post.
But dont know if i can explain well my english is little old lol
For the lockscreen maybe look this way
https://play.google.com/store/apps/details?id=org.kustom.lockscreen
Click to expand...
Click to collapse
Thanks for the info. Idk can u make it clickable too?