Download latest version on www.commmgrpro.com
Available version for Square, QVGA, VGA, 320x320 and 400x240(Omnia) vesions...
V2.7(2009-11-26)
1) Compatibility to switch band with HTC Touch HD2
2) Compatibility to switch band with Toshiba TG01
3) switching is faster because now I dont turn radio off, just unregister and register from network. No need to enter automatically PIN code too.
http://www.commmgrpro.com/files/CommMgrPro_V2.7.CAB.zip
V2.6.1b2(2009-07-27)
1) Support for Widcomm BT Stacks (HTC Diamond2, HTC Touch Pro 2, IPAQ devices, etc)
2) German texts fixes. (Thanks Michael Pauliks ¡)
Latest Version V2.6(2009-04-01)
The installer CommMgrPro_2.6_RIL_RegUnreg.cab is a solution for same devices that doesnt refresh its location correctly after some hours. Please try it
I ve attached the file containing only the program, without theme. Require a theme installed. Its name is CommMgrPro_2.6.cab
I ve created a installer containing the skizzo theme for all the resolutions. The ones that are not adecuated for the device are remove on install. But I couldnt upload it. This is a direct link
http://www.commmgrpro.com/files/CMP_2.6_QVGA_VGA_SQUARE.zip
1) Bug fixing.
2) Button refresh now recalculates which schedule should be active and do it.......
3) SMS and Mail actions improved with a button to choose an outlook contact.
4) New action to sync an email account
5) Now you can copy one time frame (with its actions) or all the time frames of a schedule and paste it to other weekdays of the same or other profile.
6) In the paste procedure you can select to remove all the time frames of the destiny profile & weekday or delete only the time frames that could overlap with the new ones.
7) On install you can choose to install as a process or as a service.
8) When you change the state of BT, WIFI or speaker, using main window or as an action now you can select "Monitor and keep the state". In this way CMP will reapply the state if windows or other program changes the state. Very useful in some devices that currently turn BT off to save battery (so your connection to your Headset is lost) or when windows turns wifi on automatically but you dont want it.
9) New Action: Close Idle connections now can be activated/deactivated as an action.
10) New Action Upload data to configure this feature to OFF/ON state. So you can select when CMP should upload location changes to the server
Version V2.6b3(2009-03-24)
Version V2.5.3(2009-03-16)
1) Bug fixing arrived with service feature:
1.1) Schedule Engine. Some schedules didnt work correclty.
1.2) Virtual Secretariat.
1.3) Button Plan now works correctly
1.4) CMP crashing ocassionally with splash screen stated "Creating GUI"....
2) Now you can lock a profile being in a schedule EOAP (Execute On Any Place).
3) Pause/Resume CMP using the main menu. When CMP is paused it wont execute actions.
3) Upgrade instructions:
3.1) Close CMP (Menu/Exit).
3.2) Copy the cab to the device.
3.3) Dont uninstall first. It will remove your registry settings, your activation code, etc.
3.4) Click on the cab file. It will uninstall/install the new version. These process can take several minutes. Please be patient and dont reset the device until de process is finished.
3.5) Once the install process is done CMP will ask you to reset the device. Click on Yes.
3.6) If you ve any problem using Service way just change the registry key HKLM\Software\Daniel Herrero\CommMgrPro\cmp_as_service to 0 and reset the device. On boot CMP will execute as a process.
Here is the link that describes new features after 2.5.http://forum.xda-developers.com/showpost.php?p=3313774&postcount=2242
Version V2.4(2008-10-31)
1) Fixed an issue on the battery statistics.
2) Fixed an issue related to lock/unlock profiles being phone off
3) Fixed issues with schedules based on "always on" profiles.
4) To avoid confussion CMP wont let you lock a profile if it hasnt a schedule that matches current time
5) The installer has been separated in two different installers. One for CMP and others for skin. In this way a CMP update will be much smaller.
6) To avoid problems with new incomming models with "strange" screen resolution CMP will be forced to use the resolution of the current theme.
7) The way to change the band now is selected manually because of the many carrier names for the different models
8) New skin available "white" for all resolutions and others are comming¡. If you know to draw icons and you want to create a skin and share it with us please contact me.
9) To update: First install the CMP's cab. Then install a theme's cab according to your screen resolution. Then run CMP.
Version V2.3(2008-10-09)
1) Skin engine improvements.
2) Bug fixing related with phone-off action. Now you can rely at 100% about add "turn phone off" action during the night and turn it on automatically in the morning.
3) Better integration between CMP and HTC Touch Diamond/Pro. Current profile-schedule is shown in the main TouchFlo3D tab (Thanks to NLS). User can disable it on Options 3
4) CMP is autorestarted automatically if other program kills it to avoid HTC task manager closes accidentally it. To close CMP just use menu/exit
5) Support for Samsung Omnia (240x400 devices).
6) Minor bugs fixed.
Version V2.2(2008-09-12)
1) There are towers on each country with same cell id. So now the primary key for Cell Mode will be CellID + LAC. CMP will convert your database so make a backup before and will fill the lac information each time it finds a cell with lac equals 0
2) Compatibility with HTC Touch Diamond and HTC Touch Pro (Fixed Band manager, speaker manager, GPS manager and some GUI changes).
3) New option to repair the database.
4) New page for connections option (In connections/menu/options)
5) Option to disable/enable connections on roaming
6) Option to CMP startup delayed on page Options 3.
7) Option to Show/Hide the main window after start CMP.
8) Clicking on the higher part of the battery bar opens the battery page
9) Clicking on the lower part of the battery bar opens the battery page
10) Hide button is raplaced by calendar button.
11) New Today tab. This dialog lets you see the next events that will happen in the place, including calendar events, "Always on" schedules and other events (time limits, etc)
Version V2.1(2008-07-24)
1) Improved call forwarding action. Now you can choose the same kind of options like standard phone program
2) New "Restore" actions. You can choose to restore any option to previous state. For example: On enter Speaker off, on exit Restore Speaker (to same value as it was).
3) The user can reassign a profile as "default profile" in the profiles tab (menu/profiles/mark as default profile). This profile hasn't cells associated and is applied when the location is unknown.
4) CMP ask confirmation before importing a xml data file found on the device.
5) English and German translation and help files have been fixed by Ralf Rutkat. Thanks¡.Some dialogs without help page now have it.
6) Test menu disabled. Ask me if you need access to it (testers, traductors, etc).
7) When CMP says that user must restart to apply changes It can be done in that moment (yes/no buttons).
8) Phone going off bug fixed.
7) MUCH Bug fixing
features looks pretty cool!
Graphically, I have to say, it isn't so good; why not just keeping the same graph style of the original comm mgr?
stepir said:
features looks pretty cool!
Graphically, I have to say, it isn't so good; why not just keeping the same graph style of the original comm mgr?
Click to expand...
Click to collapse
mmmmm art is art and I am not art designer. But all is configurable. Images, fonts, colors......
Is there anyone that can provide graphics??
And could you compike a "non-debug" version? Thanks
Applestar said:
Is there anyone that can provide graphics??
And could you compike a "non-debug" version? Thanks
Click to expand...
Click to collapse
This is beta version and the goal is bug-fixing so debug version is needed to find them. Please keep in mind this is the first beta. Only install it if you have time to test it and report bugs. If not is better to wait some weeks for a stable version......
Greetings
This looks like a great peice of kit. Downloading now and will report any findings/bugs here
Excellent work
S.K.
silent_killa said:
This looks like a great peice of kit. Downloading now and will report any findings/bugs here
Excellent work
S.K.
Click to expand...
Click to collapse
Thanks. Ready to fix bugs. This application is complex (many oem specifics issues) so it could be a long time....but I hope finally all is fixed...
Ok just read your instructions and i'm assuming that email address is mispelt (1 m instead of 2 at the end)??
S.K.
Right fixing.....
Ok, first bug. Clicking on wifi settings brings me straight to the old comm manager screen.
silent_killa said:
Ok, first bug. Clicking on wifi settings brings me straight to the old comm manager screen.
Click to expand...
Click to collapse
well, it isnt a bug. Its what I wanted to do. Maybe I should change the text. Its a quick way to open classical Comm Mgr....
Any way to change the default place so i can remove the 'unknown' one?
danielherrero said:
well, it isnt a bug. Its what I wanted to do. Maybe I should change the text. Its a quick way to open classical Comm Mgr....
Click to expand...
Click to collapse
Or maybe do like a 'Setting1' 'Setting2' type scenario that points to the 2 settings in Control Panel. Would be nice to get rid of the old Comm Manager altogether and replace with this one once its final. Maybe just add the old CommMgr as a menu item??
Once i've created a new place and i go to edit it, the changes are not saved.
silent_killa said:
Any way to change the default place so i can remove the 'unknown' one?
Click to expand...
Click to collapse
I thought It was a good idea to setup a default place. When the current location isnt known then htis plca. This place is special because allows the set a default behaviour when the current place isnt known.....
Can i make a suggestion for the data counter?
I've noticed that the counter only clocks up for the current data session. Once the session is closed, the counter resets to 0 so you have no way of seeing how much was tranferred last session. Maybe add:
Current session
Last session
Total (with a reset counter)
Just an idea to increase functionality
S.K.
silent_killa said:
Once i've created a new place and i go to edit it, the changes are not saved.
Click to expand...
Click to collapse
Ok ignore this post. Wasn't clicking on menu---> save lol.
However, have noticed another bug. If you change the icon and then save, the name of the place is replaced with the icon name.
S.K.
danielherrero said:
I thought It was a good idea to setup a default place. When the current location isnt known then htis plca. This place is special because allows the set a default behaviour when the current place isnt known.....
Click to expand...
Click to collapse
Yeah sorry, didn't fully understand what it was all about untill now.
Just noticed a newer version already. Downloading and installing now.
silent_killa said:
Once i've created a new place and i go to edit it, the changes are not saved.
Click to expand...
Click to collapse
mmm. I cant see this bug. I create a new place and I edit it and change name, desc, and icon and it works...have you tried it again?
silent_killa said:
Can i make a suggestion for the data counter?
I've noticed that the counter only clocks up for the current data session. Once the session is closed, the counter resets to 0 so you have no way of seeing how much was tranferred last session. Maybe add:
Current session
Last session
Total (with a reset counter)
Just an idea to increase functionality
S.K.
Click to expand...
Click to collapse
Yes. The idea is to monitor data traffic per session, day and month but this options isnt included in this beta to avoid confussions on this stage....
Related
Hi.
My battery drains very quickly in my area (HSDPA). But if i force GSM then the battery lasts two or three days and i only need hsdpa 3 or 4 times by day, for example
20010-04-20 (V2.9)
1) The combo box that stores the model keeps the value when the program is restarted.
2) Fixed problems with owner names starting/ending with spaces.
3) other minor bugs
2009-11-27 (V2.8)
1) Compatibility with new Bluetooth Widcomm stack (HTC Touch Pro2, HTC Touch HD2, etc);
2) Compatibility to switch band with HTC Touch HD2
3) Compatibility to switch band with Toshiba TG01
4) switching is faster because now I dont turn radio off, just unregister and register from network. No need to enter automatically PIN code too.
2007-09-25 (V2.4.2)
Compatibility with Kaiser
Changes in 1.2.3:
Fix a bug in 1.2.1-1.2.1. Auto mode didnt work properly and switch delay action too.
Changes in V1.2.2 :
Some GSM operators intercepts http not found requests and redirects to help pages. It can cause unknown effects on bandswith who tries to look for the version number in the response stream.....
Changes in 1.2.1:
Buffer overrun bug in devices with very long radio manufacturer name (caused bandswitch fall).
Bandswith now detects if is running on WM5 or WM6 so now only switch twice if switching from GSM to UMTS band in WM6 devices. So now one only version for WM5 and WM6
Dual line support with two pin codes.
If the password(s) is/are incorrect the device will sound and vibrate and show Pin Page.
Pin enable user: remember to enter pin(s) again after reinstall.
danielherrero said:
Hi.
My battery drains very quickly in my area (HSDPA). But if i force GSM then the battery lasts two or three days and i only need hsdpa 3 or 4 times by day, for example when i surf the web or read the news. And with gsm i can use real mail but with hsdpa the battery is empty in 5 or 6 hours. I am looking a tool to switch between gsm and hsdpa in today screen. I know that i can do it in phone/options/band but it's very boring. Can someone help me?. If now i will write a little program (today plugin) and i will post it.
Thanks
Click to expand...
Click to collapse
as far as i know nothing like this exists
Cool Idea.
This is shouldnt be that difficult to achieve...
Use SetHSDPA.exe and link it to the Wireless Manager today plugin. Then everytime you tap the wireless plugin it then turns on/off the HSDPA functionality?
AFAIK band selection can be done changing a setting in registry, so this can be done with mortscript.
1. google SKSchema... it's a program which will allow you to do this (it's not free, but i think the price is awesome for what you can do with it), and download it.
2. Download these scripts that someone else made...
3. Drop the scripts in the \Windows\Start Menu\Programs\sScripts directory
4. Go to your phone's Settings, and choose Menu
5. Scroll down and select any of the new scripts (I am personally using the toggle script).
**alternatively, you can assign a button to it
***additionally, I use this program's Soft Reset feature to automatically soft reset my phone at 5 in the morning to make sure that when i get up in the morning the phone had a chance to reboot and has a fresh start...
hope this helps!
marsb007 said:
1. google SKSchema... it's a program which will allow you to do this (it's not free, but i think the price is awesome for what you can do with it), and download it.
2. Download these scripts that someone else made...
3. Drop the scripts in the \Windows\Start Menu\Programs\sScripts directory
4. Go to your phone's Settings, and choose Menu
5. Scroll down and select any of the new scripts (I am personally using the toggle script).
**alternatively, you can assign a button to it
***additionally, I use this program's Soft Reset feature to automatically soft reset my phone at 5 in the morning to make sure that when i get up in the morning the phone had a chance to reboot and has a fresh start...
hope this helps!
Click to expand...
Click to collapse
Does this solution allow you to switch between 'U' and 'G' on the fly? Meaning it does not need to close one connection to achieve the other and vice-versa.
as far as i can tell from the script it turns on flight mode, toggles between 3g/Edge, depending on which one you had originally when the script was run (by changing the registry settings), and then turning flight mode off...
your phone will search for signal as it normally would...
the whole process takes about 20-25 seconds.
Give skschema a try. They have a trial, so you can try before you get it if you decide to get it. There is also a Today plugin, although i've never used it, so i can't give any input as to how good it is.
in my experience with the phone, any time you change the band selection the phone goes into flight mode
The program is finished and working
Ok. The program is finished.
1) Put it in rom.
2) Create a shortcut and put it in \windows\startup directory.
3) Then you will see a circle icon at botton.
. White circle means Auto mode.
. Green circle means GPRS mode (2g).
. Red circle means UMTS/HSDPA mode(3g).
Tapping this icon a window is showed and you can click one of the next buttons:
auto: Sets auto mode.
GSM: Sets gsm mode.
UMTS: Sets 3g mode.
Close: closes the program.
Then the registry key \\SOFTWARE\\OEM\\UMTS\\OpMode is changed and the radio is reseted. And thats all.
Enjoy it...
dherrero said:
Ok. The program is finished.
1) Put it in rom.
2) Create a shortcut and put it in \windows\startup directory.
3) Then you will see a circle icon at botton.
. White circle means Auto mode.
. Green circle means GPRS mode (2g).
. Red circle means UMTS/HSDPA mode(3g).
Tapping this icon a window is showed and you can click one of the next buttons:
auto: Sets auto mode.
GSM: Sets gsm mode.
UMTS: Sets 3g mode.
Close: closes the program.
Then the registry key \\SOFTWARE\\OEM\\UMTS\\OpMode is changed and the radio is reseted. And thats all.
Enjoy it...
Click to expand...
Click to collapse
Is the program supposed to be attached somewhere?
jeje, sorry.
shogunmark said:
in my experience with the phone, any time you change the band selection the phone goes into flight mode
Click to expand...
Click to collapse
That is not necessarily true. If you go into the Band tab to change the selection, it does not need to go into flight mode. It simply disconnects and reconnects with the new selection.
new option
Hi. I ve added a new option.
To avoid forget to switch back to gprs after use hsdpa, when you tap on UMTS appears a dialog about "limit time" with options:
no: No limit
1, 5, 30, 60, 120: After x minutes the system switch back to gprs.
There was a problem cleaning the notification when the app exits......
New release....
Thnx loads. I'll give it a try.
Thanks
danielherrero,
Great job, it's working on my 8525. It's just what I needed thanks.
You' re wellcome....
Thank you. Going to put it on my 8525 as they roll out 3G here in the US I think this will come in very handy.
Take Care!
Weekend App
Well done!!! Thanks...This app works great.
This is my weekend app. As soon as the weekend starts I put the phone into GSM mode only. Battery life is far better. I don't need UTMS on the weekends....when i do....2 clicks and I'm in UTMS...2 more and I'm back to GSM.
I love this plugin! cant get easier to switch auto -> umts, and umts -> auto! thanks!!
Here is a 'Phone location based application trigger’. Launches other applications, command lines and MortScripts and anything based on time frame and location you setup. Works on Windows Mobile Professional 5/6 (PDA with Phone) only.
Some of the possible uses have been added at second post below.
This is more advanced version of my application rk-Sleep, where you could just perform one action at one location.
rk-LocSwitch can have any numbers of locations and any numbers of actions. But please do understand that this is not a 'readymade profile application' but by configuring it properly you could make it a profile application and much more. Ultimately you can automatically customize your phone based on where you are and the time span you setup.
Also support fixed actions, actions at pre-defined time, not based on the location (This is helpfull to set up backlight 'Bright' during day hrs and 'dim' during eventing/nights)(This feature is freeware and does not expire)
Now the important thing, this is not a freeware, it is 3.99 USD for XDA-Developers.com members. The trial version runs for 15 days so that you can test it and see if it satisfies you.
Update 1.0.6
Support for undefined/unknown location actions added.
Application now by default starts in minimized mode(not the sys tray mode)
Update 1.0.5
Error while 'Testing' the actions is rectified.
Update 1.0.4
Option to Show/Hide the Tray icon added
Debug support added.
Cosmetic changes done.
Update 1.0.3
Support for hide/show 'Un-Defined' location icon.
Bug fixes
Update 1.0.2
Support command line tags, eg Application could automatically send information such as LocationName, LAC, CellID by using the command line tags <LocationName>, <LAC>, <CellID. By this you could even send sms based on your location Entry/Exit along with location info.
Application can update registry with the current Location name, LAC and CellID.(HKCU\Software\rk-LocSwitch). Now your custom application can access the location information!
New menu added to copy TowerIds from one location to other.
New menu added to copy actions from one location to other.
New menu to force saving of the configuration data.
Bug fixes
Setup:
Install the application.
Run the application rk-LocSwitch from programs for the first time from the programs menu, after which the application starts automatically after soft resets.
A new task bar icon will appear in the task tray, click it to launch the application(application runs hidden, this is the only way you can access the UI to set it up)
First tab in the application is ‘General’, the information mostly read-only; you can specify the polling time (in minutes) and enable/disable the application.
‘Locations’: lot of information here. First you create a new location from the top part of the screen.
Location name is just a name such as ‘My Home’, ‘Office’ etc
Choose a icon ‘which would be displayed on the top notification bar’(you can have custom icons, just add the icons to the ‘\Icons’ folder under \Programs\rk-LocSwitch)
Check the box ‘Notify’(when ever you are at known location, a icon would show up on the title bar)
Specify the time frame such as 08:00 to 18:00(day schedule) or 22:00 to 06:00(for night schedule)
Specify if the location is of 'Undifined Type', If undefined then time frame settings are ignored and LocationIds are removed automatically.
Click OK to save this location
Add the current tower id displayed to the list, you could have multiple towers (if the location has interference from multiple towers or if you have say multiple ‘Places’ put under same location. Such as you want to configure the location ‘Office’ at two different physical locations but you want to have similar actions to perform.)
Now go to the ‘Actions’ button
You have ‘Entry’ and ‘Exit’ actions. You can add multiple actions for each action type. You can even order then ‘up’ or ‘down’. Use the ‘Action’ menu for additional commands such as ‘test the action’.
Next tab is 'Fixed Actions' here you could setup actions independent of 'Location' meaning these actions takes place irrespective of 'Locations' Useful for setting the backlight of the device.
Next tab is log where each attempt based on the polling time is logged. You can change the log action to log all, location change (Actions) only or none. Once you understand the concept put it to ‘None’(but if you think that something is not working then switch the log to all and investigate)
Last tab about: which is basically the registration module and the version info
Important notes:
Notes: if you want to configure home day and home night, you must have two locations setup such as ‘Home Day’ and ‘Home Sleep’ have the time frames carefully set e.g. 08:00 to 22:00(Home Day) and or 22:00 to 06:00(for night schedule). Do not overlap the time frames!
Keep the polling time as large as possible, unless you need real time response.(although I found keeping the polling to minimum (=2 minutes) did not make any noticeable difference to battery usage!. But test it out.
Do not forget to configure the ‘Entry’ and ‘Exit’ actions properly. Enter and exit actions generally should be cancelling each other (i.e. if you switch on flight mode on entry, make sure you have flight mode off on exit)
System is real time( ± Polling Time) , so if you are at home with flight mode activated and if you leave the home at mid night phone would switch back on.
If you really want to exit the program, use the right menu ‘Options’ and choose ‘Save & Exit’
When you start the application(not while activating the rk-LocSwitch) make sure the phone is not in flight mode
More importantly this is a ‘Switcher’ so I do not supply any command line applications to do your custom tasks; they are available in this site and over the internet. You are welcome to link in this thread so that it can be easily accessed by other users. But if some customization what you want is not available then you can make a request, and I will do my best to find one or built it myself.
Check in this thread for more pluggins
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Thank you all for the support.
Purchase
Download from here
Possible uses
Switch off Phone or Sound while at home during sleeping hours.
Keep backlight at low setting while inside house or office. Increase the backlight while outside house or office.
Make a alarm function say if you are at office play at mp3 at 5:00 PM
Wake you up at particular destination specifically travelling in bus or train where you travel regularly.
Load your favorite theme/wall paper as specific locations.
Send SMS on entry or exit of a location.
Will be updated…..
If you have some more ideas I am glad to update this list.
Flight Mode On/Off utility
Here is the command line flight mode on/off utility.
Command lines to switch on and off
Code:
\Program Files\rk-FltMode\rk-FltMode.exe on
\Program Files\rk-FltMode\rk-FltMode.exe off
\Program Files\rk-FltMode\rk-FltMode.exe toggle
If you are using rk-OSR to check mail you could enable and disable based on your location using the following command line
Code:
"\Program Files\rk-OSR\rk-OSR.exe" Enable --> Enables the rk-OSR
"\Program Files\rk-OSR\rk-OSR.exe" Disable --> Disables the rk-OSR
rk-TSR Support
rk-TSR a Theme Switcher, You can load a pre-set theme/wallpaper based on your location!
Code:
\program files\rk-TSR\rk-TSR.exe enable
\program files\rk-TSR\rk-TSR.exe disable
\program files\rk-TSR\rk-TSR.exe “\storage card\rkAzulBlue.tsk”
(For command line the theme must be listed in rk-TSR)
I am planning to add following new features in the near future.
Add fixed actions at specified time irrespective of the location: This might help to set back light ‘bright’ during day and low during night.
Allow actions during the device status change such as wifi connected/disconnected, active sync done, soft reset etc
If you have any specific request please go ahead let me know.
rk-bk-Light a backlight command line switcher
Here is the command line backlight switcher
Code:
[/FONT]
[FONT=Verdana]\Program Files\rk-bk-Light\rk-bk-Light.exe 2[/FONT]
[FONT=Verdana]\Program Files\rk-bk-Light\rk-bk-Light.exe 10[/FONT]
[FONT=Verdana]
Do not know if it works on all devices. But works on hermes
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Download from here
rk-LocSwitch Update 1.0.1
Fixes and enhancements
Added support for fixed actions
You can add any number of fixed schedules and add any number of actions on each such schedule(e.g. to set the backlight low during night and bright at day)
These fixed schedules not specific to the locations and will occur at the time specified.
Does work even if the application expired!(it is a freeware, only location service would not work)
Better file browser added, now you do not have to key in the command line.
Bug with the system not clearing some of the old notifications fixed.
Battery use better that before (almost makes no difference on the battery use!)
If you are upgrading from the old version please uninstall the old version and delete any existing notification manually (delete any notification with name ‘rk-LocSwitch’). Then install the new version.
Also added new component rk-BackLight to support setting backlight on command line.
rk-Calendar-Update: Convert all day Calendar events to time spanned events
To convert all day Calendar events to time spanned events automatically so that you don’t get reminders at midnight!
Use this utility if you are entering many appointments during day as 'Full Day Events' and difficult to manage it. Otherwise you can just run this utility once manually.
Read more about it here
Code:
\Program Files\rk-Calendar-Update.exe “08:00” “22:00”
Updates all your 'full day events' to fixed time event with specified time span.
Hmm, No one has any comments?
I really like the idea. Unfortunately, this does not work on CDMA.
tytnguy said:
Hmm, No one has any comments?
Click to expand...
Click to collapse
Wasn't there a topic about this app with many comments like adding vibration on/off? I'll try this app with hermes.
EDIT: Oh this is a new app (update of rk-sleep)
Guys, can this software send an sms to a predefined no. whenever the Tower ID changes.
mushipkw said:
Guys, can this software send an sms to a predefined no. whenever the Tower ID changes.
Click to expand...
Click to collapse
It can not send sms as it is now, if you find exe, or mortscript which could send an sms then you could use this program.
This program is like a trigger which calls other executables based on location, so as long as you can point to right executable then you are good.
But let me know if you are not able to find a executable to send sms, I might be able to build one for you.
Hi TyTnGuy,
is it possible to get the geographic Coordinatas wich assigend to the Tower ID somewhere in the www?
gnu0815 said:
Hi TyTnGuy,
is it possible to get the geographic Coordinatas wich assigend to the Tower ID somewhere in the www?
Click to expand...
Click to collapse
I am not aware of any source with the Geographic Coordinates, But with that info lot of new ideas though!
tytnguy
What kind of battery indicator app do you use?
Is it a standalone battery indicator? or part of other app?
Really nice.
Im looking from a very long time for an app. which can send an sms to a predefined no. But I couldn't find any such. I would be grateful if you can develop such app.
Thanx.
Looks realy good. Will test this on the HTC Trinity.
Keep up the good work!
mushipkw said:
Im looking from a very long time for an app. which can send an sms to a predefined no. But I couldn't find any such. I would be grateful if you can develop such app.
Thanx.
Click to expand...
Click to collapse
I am working on your request, should be there in a day or two.
I will be compiling a list of tips and tricks as I'm getting used to my S740 that will hopefully help others ramp up more quickly.
Desired Result: I'd like to have my phone lock when the screen goes dark so I don't accidentally call someone from my pocket
Suggestion: assuming you've already tweaked your power settings to turn off display per your preferences, go to Settings, More, More, Key Lock. Select "Lock Device When Idle" and check "Unlock Device When Keypad is Opened"
Result: this ensures I don't call someone accidentally (power timeout for screen is set to 10 seconds, lock device when idle locks device when screen goes off) but still allows me to grab the phone from my pocket, open it, and txt someone without having to enter my pin.
Quickly Toggle Bluetooth On/Off
(an old favourite)
Desired Result: a quick way to toggle bluetooth on and off
Suggestion: install Bluetooth Toggler from this thread; map a SpeedDial button to it by going to the app (might be under Accessories), clicking Menu, Add to Speed Dial
Result: holding down that Speed Dial number = BT toggles
Here are some in which i have used and compiled :
CHomeConfig - Configure your Sliding Pane
clockontop - Display digital clock on top bar and make avalible on all screens (except home)
Dr.Gonzo Clear Fonts - Installs clear fonts (beautiful)
HTC_Touch_Dualt9_problem_patch - Disables XT9
mixtapeking1900-turn-sms-sent-notification-off - Disable "Message Sent" notice from SMS
moBluev2_1_setup - Receive bluetooth files to Storage Card
SMSBubbles - Display new SMS message on home screen.
Additionally, i wanted to check with you guys. I notice that on my default HTC Sliding Panels, the photos plugin is missing ! I have seen it on preview videos, but somehow it's not on my unit. Is it avalible on yours ?
Here are some more
spreset - soft reset
QuadSMS - Automatically resolve phone numbers to contact for SMS and Delivery Report
VGA MusicID - Music ID
rubik said:
Here are some in which i have used and compiled :
CHomeConfig - Configure your Sliding Pane
clockontop - Display digital clock on top bar and make avalible on all screens (except home)
Dr.Gonzo Clear Fonts - Installs clear fonts (beautiful)
HTC_Touch_Dualt9_problem_patch - Disables XT9
mixtapeking1900-turn-sms-sent-notification-off - Disable "Message Sent" notice from SMS
moBluev2_1_setup - Receive bluetooth files to Storage Card
SMSBubbles - Display new SMS message on home screen.
Additionally, i wanted to check with you guys. I notice that on my default HTC Sliding Panels, the photos plugin is missing ! I have seen it on preview videos, but somehow it's not on my unit. Is it avalible on yours ?
Click to expand...
Click to collapse
I have it in my 740 rom on my shadow. are you also missing the reg entries for the pictures homescreen plugin ?
I doubt they removed it from the cpr. check the home.xml to see if they just removed it from there.
Guys remember chomeconfig will not save your configs after reboot.
so any homescreen order will be reset to default after reboot. at least on my 740 rom it doesnt save because the HTC home.xml is diffrent then normal 6.1 home.xmls
can anyone realize a direct link to "write new sms" on the home page?!?
thank you in advance!
Luca
ShadowMike,
Thanks for your info. I used CHomeConfig to check and looks like the CMyPhotos there, but disabled by default on HTC Home . Wonder why they did that.
Viskas,
If you change the default home screen from HTC Home to Windows Sliding Panel, the SMS/Messages plugin allows you to create new sms from the home screen.
However, i believe you should also consider the faster way to write a new SMS from the home screen, which is to just start typing the contacts NAME from the home screen, and select send SMS using the softkey. I think this is the best and fastest way to do it.
rubik said:
ShadowMike,
<snip>
However, i believe you should also consider the faster way to write a new SMS from the home screen, which is to just start typing the contacts NAME from the home screen, and select send SMS using the softkey. I think this is the best and fastest way to do it.
Click to expand...
Click to collapse
I second that
thank you for the advice!
luca
To disable the HTC/TouchlessFlo/whatever black ugly volume bar, delete following registry key. The default system volume bar will appear next time you restart the device.
Code:
HKCU\Software\HTC\Bootlauncher\Services\HTCVOLUME
Anyone knows hot to disable the signal blinking/charging blinking/pulsing led around the cursor keys?
data counter
hi, dont know if this is the right thread to post this but i wonder if theres any freeware app that shows if you use the wifi or the 3g/edge connection and how much MB you used.
//Johan
Program shortcuts on Homescreen?
Is it possible to put a shortcuts for launching of favorite programs directly on HomeScreen ?
picture dialer
Anyone know of a way to add a picture dialer (like in touchflow 2/3D) to the homescreen, possibly via CHome Config? I really can't get used to only having the keyboard quickdials as an option.
Phone contacts vs SIM contacts
I'm really annoyed 'cause I can't find a way to make it show me only the contacts stored on the phone. Any ideas?
Settings/Phone/Call Properties - checkbox Show SIM Contacts...
ugly "beep" sound at call start
Hi,
I am trying to get rid of the "beep" sound that you hear when you press the green receiver to start a telephone call. In S710 one should exchange the file callstart.wav. In Windows Mobile 6, I cannot find this file. Anyone knows what to do ?
Thanks.
Media connect - watch tv channels and listen to radio via stream
LINK - http://forum.xda-developers.com/showthread.php?t=414043
Wifi_ON-OFF - 1 icon to toggle wifi on/off
I stuck it in windows/start menu so it is now on my homepage.
LINK - http://forum.xda-developers.com/showthread.php?p=2828622
PPCPimBackup - back/restore up all PIM info on/from your memory card.
LINK - http://forum.xda-developers.com/showthread.php?p=1189061
watch dvd's or other video files on your Rose s740
Convert DVD's other video files to play on your Rose s740
http://handbrake.fr/?article=download
select to Disk drive mode on your phone
'settings/ connections / more / usb to pc'
just plug in your s740 to PC
select source - file or dvd
select destination - your sd card
settings
Presets - Basic / Classic
width/Height - 320 x 240
Start.
40 minutes of prison break takes about 8 minutes to convert. You can queue multiple files to convert and load to phone.
Enjoy..
rubik said:
Here are some in which i have used and compiled :
...
HTC_Touch_Dualt9_problem_patch - Disables XT9
...
Click to expand...
Click to collapse
For people that want to have control on what is tweaked to allow them to easily revert back. You only have to add the following key to your registry for defaulting to abc mode instead of the annoying XT9 (see CM_ENT~1.001 in HTC_Touch_Dual_t9_problem_patch.CAB):
Key Name:
\HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME
Value Name:
CarrierDefaultTextMode
Value Data:
0
Explore the FULL POTENTIAL of your Windows Mobile 6.5 !
YOUTUBE Video - HERE
YOUTUBE Video - HERE
XTreme Tweaks v1.0, best tool for Windows Mobile 6.5 personalization/customization. Easy to use, finger friendly, NO NEED FOR STYLUS!.
Available in both VGA and WVGA Resolution!
- REQUIREMENTS -
1. Windows Mobile 6.5
2. VGA/WVGA Resolution
3. .NET Compact Framework v3.5
--GUI Tweaks--
1.Start Menu Columns - Allows you to choose how many columns you want in Start Menu.
2.Scroll Bar - Choose how your scroll bar will look like. The change can be visible in Phone, File Explorer, etc.
3.Phone Keypad - This option allows you to set the theme for Phone keypad. The change can be visible in Phone.
4.ClearType - If ON, ClearType will be activated.
--System Tweaks--
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
2.STK Services - If OFF, this option will disable the SIM Operator (Network Operator) options. This will not set your Phone into Flight Mode. The change can be visible in Start Menu - your Network Operator icon.
3.Increase Font Cache - If ON, font cache will be increased.
4.Increase TCP/IP Cache - If ON, TCP/IP cache will be increased.
--Other Tweaks--
1.SIM Contacts - If HIDE, all SIM contacts visible in Contacts will be hidden.
2. Auto-Lock - If ON, your Phone will auto-lock after 50 seconds or at power button press.
3. SMS Threading - If OFF, SMS Threading will be disabled. This change can be seen in Text/Messaging at your messages.
4. Customer Feedback - If OFF, Customer Feedback will be disabled.
5. Error Reporting - If OFF, Error Reporting will be disabled.
6. In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
7. Right SoftKey - This option is visible with Windows Default as Today at the right Softkey.
8. SmartTouch - If ON, SmartTouch will be available in most programs.
FEATURES
- GUI Tweaks -
Start Menu Columns - 3,4,5
Scroll Bar - White, Gray, Default
Phone Keypad - Black, Gray, Default
ClearType - OFF/ON
- System Tweaks -
SMS Sent Message - OFF/ON
STK Services - OFF/ON
Increase Font Cache - OFF/ON
Increase TCP/IP Cache - OFF/ON
- Other Tweaks -
SIM Contacts - HIDE/SHOW
Auto-Lock - OFF/ON
SMS Threading - OFF/ON
Customer Feedback - OFF/ON
Error Reporting - OFF/ON
Right SoftKey - Comm Man, File Explorer, Default
In Call Recording - OFF/ON
SmartTouch - OFF/ON
MORE FEATURES
- Finger Scrolling !
- Big Icons/Buttons, finger friendly, no need for stylus !
- Landscape Support !
- Cool Graphics
- Most Daily Use Functions
- EASY to USE !
- Rapid menu access
- Help
- Restart Device
- Restore To Default
- .PNG Start Menu Icon
Full description HERE
The DEMO Version can be downloaded from HERE or HERE.
By buying/donate this application you will support me (BOGYSOFT) and further development.
Any posibility to have your program adapted to omnia 249x400?¿?
WAIKIKI728 said:
Any posibility to have your program adapted to omnia 249x400?¿?
Click to expand...
Click to collapse
My intention was to develop XTreme Tweaks for all resolutions, but unfortunately the satisfaction of my work didn't match the effort that i put into this application.
bogy16 said:
My intention was to develop XTreme Tweaks for all resolutions, but unfortunately the satisfaction of my work didn't match the effort that i put into this application.
Click to expand...
Click to collapse
This is so cool cant wait to try in QVGA.
Wow...looks amazing...unfortunately it is not for WQVGA(Omnia) :-(
QVGA\WQVGA Version will soon be available!
QVGA \ WQVGA Resolution Now Available!
Start Menu Columns tweak don´t work on my Gigabyte GSmart S1200 with official WM6.5 ROM :-(
nice work dude!!
ill give this a try.
can i ask, with the 3,4,5 column setting does this centre the white selection cloud over the new icon position?
thanks
MG
MysticGenius said:
nice work dude!!
ill give this a try.
can i ask, with the 3,4,5 column setting does this centre the white selection cloud over the new icon position?
thanks
MG
Click to expand...
Click to collapse
Try the demo version, if you like it you'll know what to do next.
jerrry said:
Start Menu Columns tweak don´t work on my Gigabyte GSmart S1200 with official WM6.5 ROM :-(
Click to expand...
Click to collapse
Try v1.1 RC1, if you like it you will find the final release soon on description link.
hi,
i was wondering if you can add these tweaks to your app.
once you have all of the options i want i will for sure purchase!! (where is the donate/purchase link i can make one today!!)
1: Disable the clock on the taskbar
2: Setting the text size (i use 1 up from the minimum size)
3: Disabling the keyboard sound for EZinput
4: the screen power settings for dimming when the device is connected to power and when disconnected to power.
thanks in advance
MG
MysticGenius said:
hi,
i was wondering if you can add these tweaks to your app.
once you have all of the options i want i will for sure purchase!! (where is the donate/purchase link i can make one today!!)
1: Disable the clock on the taskbar
2: Setting the text size (i use 1 up from the minimum size)
3: Disabling the keyboard sound for EZinput
4: the screen power settings for dimming when the device is connected to power and when disconnected to power.
thanks in advance
MG
Click to expand...
Click to collapse
I will consider your request in the next release.
Best regards
bogy16 said:
I will consider your request in the next release.
Best regards
Click to expand...
Click to collapse
Brilliant, please can you point me to the donate link?
thanks
MG
Hey, I have a Samsung Intrepid with WM6.5 320x240.
Installed your program, asked me for a license code after I clicked on the icon. I did not have a license code, due to only wanting to try it. So, I clicked the close button, and researched a little to why it asked that. Tried to go back by clicking the icon once again and nothing happened. Uninstalled and reinstalled it numerous times and every attempt after I click the program's icon, nothing happens.
If an update is still in the pipeline this app would be a gem. At last something finger-friendly to replace AdvancedConfig. Just waiting for the WQVGA version as well now
Hi
Nice work on getting this app together, but...
On a stock SEA 6.5 ROM on a TP2, the finger friendly thing does not work.
The stock ROM allows for Explorer to be scrolled with your finger natively, but not something like 'Notes'.
I was hoping your app would add that functionality, but it doesn't seem to.
Cheers
Jabberoo
bogy16 said:
I will consider your request in the next release.
Best regards
Click to expand...
Click to collapse
Hi,
Whens the next release? Im thinking of buying but there has been no updated for ages, and most of these things can be found in the registry.
will there be any updates or is this dead?
Thanks
MG
can you please tell me the registry value to modify to have this on?
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
and this also on?
In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
nic85 said:
can you please tell me the registry value to modify to have this on?
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
and this also on?
In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
Click to expand...
Click to collapse
I would like to know the value for SMS as well please!!!!
I am starting this thread to stop high jacking the original [Manila][12-Nov-2010] Co0kie's Home Tab v2.0.0 - Final Released thread.
I have been using CHT for some time through NRG's ROMs.
I began making widgets like the Reminder widget [CHTwidget]CHTw Reminder and helping Poyensa with his Note widget [CHTwidget]CHTw Notes.
I also have created some toggles and worked on some alternate toggle methods like data without WMLongLife.
Automatic to Normal and Vibrate Toggles
Voice Command Toggle
MortScripts to toggle settings
Also, some other links.
Switches for Email Widget to provide functions in lock screen like switching accounts, deleting, etc.
I started seeing things I would like different in the basic code of CHT.
This is the beginning of my journey into this work.
CHT_DataLoaders
Original CHT_DataLoaders with fix for CHT restart
Appointment Widget with Tasks included
CHT Lockscreen
CHT StartUp and CHT Core
Tasks Widget
Email Widget and associated widget lua tweak
Scaled Basic Widgets (the CHT_Widgets.lua)
Free Links unlock control (CHT_FreeLinks.lua)
Some thank yous:
poyensa -- for getting me started with his Notes widget and then all his help through my learning curve
rat_2665 -- for his help and his weather clock for code to study
MichelDiamond -- for his pointers
Many others that have chimed in and of course the testers out there too.
CHT_DataLoaders.lua
Some time ago I noticed something in task widget:
If I have tasks that are due two weeks and later from now. They show up with red text. As the days go by and a task that shows red becomes less than two weeks away the text becomes gray.
Others have the same problem:
In the task widget, I want to see only the list of upcoming task for 7 days so I set the "Tasks range" in CHTeditor to 7 but the task that due more than 7 days still show in red text.
And I noticed that if I set "start date", the task will not show in list of task widget.
Click to expand...
Click to collapse
I began the process of editing CHT_DataLoaders.lua which is the 7B09A9E6_manila file after it is "cooked" in the kitchen:
My interpretation of the original code:
Even if you choose Sort by Start Date it still only includes items that have Due dates within the date range you pick, so items with start dates that do not have due dates in the range do not show up. It appears the intent is to show you tasks that are due within or before the range you select. Your choice of sort by due date or start date only sorts items due on the same date.
What I wanted is items without start dates to be included in the list no matter what their due date is.
In my code I have tried to get it to show start dates in the range instead.
In early development the red still showed up if I sorted by Start Date, but I think this is from the code using Due Date to set color and not sort date or something else.
To no longer have red Tasks listed beyond the Tasks Range, the list now only shows the tasks in the range and does not show any more than that. For example if you set the range to 2 days and you only have one task between now and then you will only see one task in the list.
I have a lot of tasks that do not have start dates so my list became long if I sorted by start date.
I decided to not include items that do not have start dates in the sort by start date and that made more sense.
Later, I changed to have tasks without start dates get sorted by their due date.
Now you should get a list of only items due within the range or before no matter when their start date is.
I find if I show both dates it "looks" better to sort by start date (my new standard setting).
One thing I have noticed if I choose not to show both dates and sort by start date it shows "..." for tasks without start dates and does not show the due date.
Later I figured out a way to do the sort differently.
Start Date:
Now if you select sort by start date you get all tasks that start before or during the task range.
This will include any tasks without start dates at the end of the list, but excludes those due beyond the task range.
This keeps the list smaller. Tasks that start on the same date are sub-sorted by their due date.
Due Date:
If you select sort by due date you get all tasks that are due before or during the task range.
This will include any tasks without due dates.
Tasks that are due on the same date are sub-sorted by their start date.
One thing you have to do is set task max count to 99 for it to work properly. Never mind, I updated the code to force it to be 99 no matter what you set it to.
Updated 12/29/2011
Reduced some redundant code and took out some code that does not seem to have an effect.
Updated 12/28/2011
Improve speed of getting first refresh of tasks into widget.
Updated 12/27/2011
Main thing is fixing the restart of CHT when you have no tasks.
Updated 12/08/2011
Tweaked the task loader portion to add a pause between running CHT task update program and refreshing the list of tasks.
Updated 11/23/2011
Tweaked the appointments filter for showing multiday and allday appointments.
Updated 11/15/2011
Still tweaking to get doNotRepeatMultiday to show the first occurance and not the rest.
Also, getting an AllDay appointment to not show up as ending the next day.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
Original CHT_DataLoaders with fix for restart
This is the original CHT_DataLoaders with fix for restarting when you have no tasks.
Updated 12/29/2011
Reduced some redundant code and took out some code that does not seem to have an effect.
Updated 12/28/2011
Improve speed of getting first refresh of tasks into widget.
Be sure to make a safe copy of your \windows\7B09A9E6_manila file
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
Appointment Widget with Tasks included
I have always wished there was a widget to show appointments and tasks together:
I began the process of editing Co0kieAppointments.lua which is the 5146EC01_manila file after it is "cooked" in the kitchen. It took updates to the CHT_DataLoaders.lua and the Co0kieAppointments.lua to get these features:
My goal is appointments and tasks in one widget that are sorted and mixed together so you may see a task then a couple appointments and then some more tasks based on their date.
I still want to be able tap a task or an appointment to open the task/appointment or task/appointment program depending on your settings.
I also wanted the long press on task features.
I think it would be nice to add features like color.
Tasks that are active and appointments due today will be the active color
Tasks overdue and appointments that are active will be the overdue color.
I set it to sort and show both tasks and appointments within each day having its tasks and then its appointments.
If you tap the date you get a pop up to select refresh, calendar, appointments or tasks so you can create new tasks or appointments. The "New appointment" version pops up a choice for refresh, calendar, appointments or tasks. I could not find and "[[IDS_New]]" to use instead of the "[[IDS_NEW_ENTRY_HEADER]]" so it says "New Appointment".
You can long press a task and get the pop up to "delete" or "complete" it.
I have done my best to get it to refresh on its own more quickly to catch task changes, etc. I think I can force a full update every minute, but do not know if this will eat battery life. It seems like it takes less than 10 seconds to update the list.
I can add a task by selecting the date and then tasks which opens sensetask in a new task. I save it and quit sensetask. In less than 10 seconds the new task shows up. I can long press a task and select complete and it changes color immediately. If I press delete it is gone in less than 10 seconds.
I sometimes get a hiccup where there is strange things in the list, but they clear up after a couple seconds.
There were some glitches to work through:
You must set the max task count to 99.
It appears the program that gathers the task data uses this limit for how many to gather.
This is different than the max count for appointments.
With appointments you get them all and filter them and then you limit the filtered list to the max count.
Click to expand...
Click to collapse
I also changed multi-day all-day appointments to show up a little differently if you have do not show multi-day appointments selected.
It sorts them by their start date so it will show up sooner in the list than the due date.
Just added the completed color to the tasks for completed tasks.
Appointments due today now have "Today:" before the time because it seemed to look strange to me without it.
Tasks have the word "Tasks|" at the beginning to show them up as a task better. Tasks without a start date show their due date instead.
My preferred user experience is to set the following in CHTEditor widget settings for appointments and tasks:
Enable scrolling on
Appointment range of 7 days
Max appointments of 20
open in editor is on
Don't repeat multi-day is on
Show appointments
I hide call history since I use the free link for it
I hide voicemail since I use the free link for it
Task range of 7 days
Maximum task count is set to 99
Show complete is on
Show both dates is on
Long press pop up is on (brings up the complete or delete menu)
Sort by start date (this will show all tasks that start in the task day range and if it does not have a start date it still shows if its due date is in the task day range too; all tasks that start or are due before today also show up.)
Click to expand...
Click to collapse
I made some more tweaks to the files. I have tasks without start and due dates added to the list with today's date, but highlighted as overdue. I changed the way tasks look for different due times like today, tomorrow, etc. I got rid of "Due" to get as few English only text values as possible.
I noticed if you set it to "Hide" in the original code you would not see any appointments at all. I changed it so "Hide" only hides the icon, "Show" always shows the icon and "Auto" only shows the icon if you happen to have no appointments. This is similar to how show-hide-auto works for call history and voice mail.
Added menu to Date and New Appointment items so when you press them a menu shows letting you pick:
1) Refresh - instead of using the separate free link
2) Calendar - to go to the calendar tab
3) Appointments- to go to the appointment program
4) New Appointment - to create a new appointment
5) Tasks - to go to the task program
6) New Task - to create a new task
Updated 12/29/2011
Reduced some redundant code and took out some code that does not seem to have an effect.
Updated 12/28/2011
Help force a refresh when you choose refresh.
Updated 12/27/2011
Main thing is fixing the restart of CHT when you have no tasks.
One thing I have noticed in the code is the way complete and delete is set up you can only do one at a time and have to wait for the refresh before you can do another one. One thing I did to avoid confusion is change text to "Complete. . ." or "Delete. . ." before running the code that changes the task to completed or deleted. When it disappears you know you can complete or delete another one.
Updated 12/08/2011
Added the ability for Voicemail and missed calls to show when you first start the widget like after a restart or reset.
Worked on the refresh code, etc.
While doing this I worked on the code for task refresh especially after selecting "complete" or "delete" in the popup menu.
I added a feature of the task text changes to "Deleting. . ." so you know it has started to delete the task.
I discovered you cannot select another task to delete or complete while the code is refreshing the data of the previous delete or complete.
Maybe I'll look into this later.
Updated 11/23/2011
Tweaked so if a multiday appointment starts today or tomorrow it shows "Today" or "Tomorrow" instead of the date.
Tweaked so if a multiday appointment ends today or tomorrow it shows "Today" or "Tomorrow" instead of the date.
If they start before today they show the date it started, but skips the start time since it is past already.
Tweaked the font scale adjustments to work better.
Updated 11/15/2011
Added time to multiday appointments that are not all day appointments.
Added code to adjust font so all the appointment time text should show.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
You can combine this tweak with the CHT_DataLoader tweak.
CHT Lockscreen
I have been using CHT Lockscreen for a while now and selected the choice for lock after a call. It seems it locks after all calls instead of locking only if it was locked before the call. Is this how it works for you all?
I have been looking in the CHT_Lockscreen.lua file, but I have not figured out how lockscreen is called when I end a phone call. I can clearly see code for when we choose lock after unplugging, but not for the phone calls. I also searched all lua files with notepad++, but had no luck either.
Can anyone point me in the right direction for where the lock gets called after a phone call?
I would like to try to get it to lock after a call only if it was locked before the call. There appears to be a registry value associated with it:
CHTI.State.WasLockedWhileIncomingCall
Click to expand...
Click to collapse
It is 0 when not locked and when locked. It becomes 1 when a call comes in, but does not if the phone is not locked before a call. This is as expected, but it still locks after a call even if it is not locked before the call.
I used notepad++ to search for WasLockedWhileIncomingCall in all files of the lua code for CHT and did not find it.
---------------------------------------------------------
I have created my own WasLockedWhileIncomingCall code for CHT_Lockscreen.lua which is 4956014B_manila when cooked:
I could not figure out the setting of lock after call, so if you have it on and your phone works like mine it will always lock after a call.
With my change you turn this setting off and your phone will only lock after a call if it was locked before the call. Set it back on and it will lock after all calls.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
CHT_StartUp and CHT_Core
CHT_StartUp
I have noticed CHT restarts Sense once in a while. If my phone is locked with CHT it still restarts, but does not lock afterward.
This tweak checks to see if CHT lockscreen was running and after CHT restarts Sense it will lock the phone again.
The file is 55933D15_manila
****************************************
CHT_Core
I had a problem with Longpress popup menus not working. I discovered it did not work if I set Animation level to None and worked if I set it to the other levels.
I tweaked CHT_Core.lua to make it work. The file is 750CA94B_manila
Updated 12/29/2011
Tweaked the check limits portion to see if the widgets are on the same page and not just the same level. This allows the appointment widget on the second page to be at the top of the page and not cause the clock at the top of my first page to hide.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
Tasks Widget
I also made some changes to the Co0kieTasks.lua which is the 3778A5E5_manila file after it is "cooked" in the kitchen:
If the task only has one date it only shows one instead of the "..."
It color codes the items still.
Added menu to Date and New Task items so when you press them a menu shows letting you pick:
1) Update Tasks - instead of using the separate free link
2) Calendar - to go to the calendar tab
3) Tasks - to go to the task program
4) New Task - to create a new task
Updated 12/27/2011
Main thing is fixing the restart of CHT when you have no tasks.
One thing I have noticed in the code is the way complete and delete is set up you can only do one at a time and have to wait for the refresh before you can do another one. One thing I did to avoid confusion is change text to "Complete. . ." or "Delete. . ." before running the code that changes the task to completed or deleted. When it disappears you know you can complete or delete another one.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
You can combine this tweak with the CHT_DataLoader tweak.
Email Widget
I have noticed when I go to my Email widget it shows the last email I was looking at. If I have gotten a new email the count x of y is blank.
I decided to figure out a tweak to get the widget to always go to the first email in the list.
I ended up having to tweak Co0kieEmail.lua file to get it to work when going from one hometab page to the other and the CHT_Widgets.lua file to get it to work when going from other tabs to the home tab. It also works on my lockscreen.
I have figured out when you have animation instead of simple page changes you will not get a double flip of the envelope.
Updated 11/15/2011
Improved the jump to the first email so you do not get the double flip in the fancier page switch settings.
Added a delay to not remove the notification until the email page actually shows when you switch to the email widget after there has been a new email notification.
Updated 11/10/2011
Added a menu item to jump to the first email so if you have flipped through a lot of messages you can jump back to the first message.
Be sure to make a safe copy of your \windows\29C5E347_manila and \windows\4B558519_manila files
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
Removed outdated Widgets.lua file. See below.
Scaled Basic Widgets
This updated version includes the tweak for having email go to the first item when you switch to home tab from other tabs from post #8 above.
Scaled Default Weather Clock:
It also has a change that allows the default clock with weather to be scaled. Now I can fit my weather clock and reminder widget side-by-side.
Added the following scaled widgets. I included the ability to go larger than default size too.
Appointments (works for AppTask version too)
Tasks
Notification bar
Email
SMS
Click to expand...
Click to collapse
Updated 12/29/2011
Tweaked the scaling portion based on the core.lua edits to stop hiding the clock on a different page. This tweak fixed the "x" position to be sure it shows as being on the correct page. It affects most of the tweaks and not just the appointments widget.
CHT_Widgets.lua file or \windows\4B558519_manila file
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
CHT_FreeLinks
I found that if I accidentally touched a free link while trying to slide to another page on the lock screen it would unlock so... I added tweaks to only unlock if I slid to the free link slide to unlock distance, but not more than twice that distance. That way if I slide more than that it changes pages instead.
For all updated files I strongly suggest you copy your originals from the \windows folder as a back up. Then copy these to the \windows folder. Then restart Sense.
**RESERVED for more**
nosedive said:
damn it.. works great
finally a solution
very well done!!!
Click to expand...
Click to collapse
Thank you
Have you tried the combined appointments and task widget tweak?
I could really use some feedback on how it works for others.
Hi Rory,
Thank you very much for your tweaks !
Would it be possible to share the lua of your "Appointment Widget with Tasks included" tweak please ?
Greetings,
Laurent
kalhimeo said:
Hi Rory,
Thank you very much for your tweaks !
Would it be possible to share the lua of your "Appointment Widget with Tasks included" tweak please ?
Greetings,
Laurent
Click to expand...
Click to collapse
Here it is. Do you have any problems with the long press on a task bringing up the menu for complete/delete and it disappearing before you can select one?
************ Moved file to main post for this **********
RoryB said:
Here it is. Do you have any problems with the long press on a task bringing up the menu for complete/delete and it disappearing before you can select one?
Click to expand...
Click to collapse
Thank you !
Yes I do have exactly the same problem with your tweaked widget.
Note that I already had the problem before with a modified App and Task widget of my own, but I did not investigate the cause.
oh I just realised that the zip only contains the lua for the appointment widget, the other _manila from your tweaked plugin must be the dataloader isn it ? (I don t have my kitchen with me ). Is it possible to have that lua as well ?
Thanks
kalhimeo said:
oh I just realised that the zip only contains the lua for the appointment widget, the other _manila from your tweaked plugin must be the dataloader isn it ? (I don t have my kitchen with me ). Is it possible to have that lua as well ?
Thanks
Click to expand...
Click to collapse
Sorry, forgot that one. Here it is.
I think when I have a little time I am going to try creating an App-Task widget from scratch so it does not use the existing lua files.
I may try another hard reset and only install the dataloader and the lockscreen tweaks to see if they work and do not cause the long press problem. If they do not then I may install my Reminder widget to check it too. Then I will try creating the new widget.
I have confirmed going back to all the original lua files does not "fix" the problem. I do not know how the break" stays permanent.
************ Moved file to main post for this **********
Thanks for the file
RoryB said:
I have confirmed going back to all the original lua files does not "fix" the problem. I do not know how the break" stays permanent.
Click to expand...
Click to collapse
Maybe one of our CHT settings (reg) is causing that problem ? It might simply be a CHT bug because if you restore all original CHT _manila files I can see no reason why the longpress bug continues.
As I said above I was already facing that bug with my CHT but did not investigate too much. Maybe it has something to do with the SenseTasks refresh process.
Cheers
The strange thing is I feel it was working for task widget, Notes widget, Reminder widget and maybe even Appointments with Tasks. Then I had to do a hard reset and installed everything. That is when I noticed the long press pop up issue. I even did a re-install of the ROM with Task-29 first. I just did not think to test the functions between the ROM flash and the installs. I am not able to be without my phone data so it will be after the weekend before I can do the flash. BTW the ROM I am using has CHT cooked in it.
Has anyone installed CHT 2.0 into a Co0kie ROM?
Has anyone installed CHT 2.0 into a Co0kie ROM?
Click to expand...
Click to collapse
Yes I had to do it some time and works fine