Hi there,
i have a problem, my hermes did a hard reset (after playing with Sktools) ,and the bad thing is that i took all the cabs out of the extrom to free space and install other( prog not cab).
Now, after using V3a unlocker and the cab mountAllExtom, i see the ext rom
and can erase progs in it but the memory remains in use . i only have 0.84 M free .
can someone help me to recover all that precious space
Thank you
Thierry
Belgium
mth said:
Hi there,
i have a problem, my hermes did a hard reset (after playing with Sktools) ,and the bad thing is that i took all the cabs out of the extrom to free space and install other( prog not cab).
Now, after using V3a unlocker and the cab mountAllExtom, i see the ext rom
and can erase progs in it but the memory remains in use . i only have 0.84 M free .
can someone help me to recover all that precious space
Thank you
Thierry
Belgium
Click to expand...
Click to collapse
I'm not sure if this is the best way, but try to upgrade to lastest LVSW that includes Extended ROM, so after the upgrade, you can unlock in the same way you do in the past and use the 10Mb extra space.
Of course, if you are not planning to upgrade to WM6, don't follow me
REgards.
thank you jcespi2005
but i prefer to stay with a french and stabel rom. Are they any french patche for this rom.
Th
flash a NBH containing only an extrom using HardSPL, this will fix your issue.
Thanks Pof,
but i am a beginner.
Where can i find it or how can i do it ?
TH
wiki and forum, search for: nbhextract, nbhgen, hardspl and customRUU.
1) Flash HardSPL (latest version) on your phone
2) Extract ExtROM.nb from any shipped NBH (it doesn't matter which one) using nbhextract
3) Convert ExtROM.nb to NBH using nbhgen
4) Flash your newly created NBH file containing only ExtROM into your device using CustomRUU, make sure to start the upgrade in bootloader mode with activesync disabled.
super
muchas gracias Pof
I'll let you know if i succed
Thierry
Use the same guide here but change the technique to Ext.ROM only and don't select the OS.nb. In other words it's exactly the same steps exept for one.
filehttp://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
ok sniper251
this means i only have to "click" on the extrom button and disregard the others ?
Yes and don't forget step #4 in Pof post assuming you have Hard Spl 1.40olipro.
Also you can check wether the .nb file is good or not before conversion using the file attached.
It worked fine to extarct the extrom.nb but which command do i need to execute the NBHgen ?
BTW i could not download the koch generator
Thanks for help
Thierry
i succeed in doing all the works and....it works
Thank you so much for ur help Guys
Th
mth said:
i succeed in doing all the works and....it works
Thank you so much for ur help Guys
Th
Click to expand...
Click to collapse
congratulations
Wellcome to the game.....
Related
just use the same method updating se rom
first backup your own radio rom
then change the header of new radio rom with the one you own
then use ntrw copy the rom back to sd,just flash
and you will have a totally win2003se machine now!!
what a pity is only simple chineses!!
how to backup the own radio rom?
pls post the step
thank you!!
me too... 1.18.00 )
How to backup own radio:
d2s 60000000 00300000
Any advantages on Radio 1.18?
Can it be used with no-SE devices?
Can anyone make a nbf for Himalaya of it?
@edsub:
please give me some instructions how to convert it into .nbf
wiki is not working, ftp is not working... $hit happened here probably.
Otherwise, I can give you my Radio ROM image.
buzz
buzz: Sorry, I would like to know HOW to creat a nbf upgrade from it . . .
Wiki is there, but just via alternate adresses (see the wiki threads on the forum)
FTP absence is lousy indeed, but lets not forget the site admins did a geat job to get the majority of the site up & running again since those [email protected]#$ *assholes hacked it. meanwhile i see that some users are setting up private ftp to distribute files needed . . .
I've uploaded 1.18 upgrade to http://mamaich.kasone.com/imate/radio_118.rar
To install it enter bootloader on your device and run HimaUpgradeUt.exe.
1.18 GSM ROM works fine with 1.72 device ROM
RE
Hi!
Whats the improvements in this new Radio ROM?
Can somebody tell me whether the radio ROM has anything to do with GPS performance? :roll:
Thanks
Just flashed my Radio ROM to 1.18
cant really tell whats the difference from 1.17 but it seems my phone gain another bar of signal ( Smart comm )
my BT-Widcomm now is working fine after re-flashing ( it seems to stalled in earlier rom )
* crossing fingers* ... hope this will be fine.. :lol:
HimaUpgradeUT
Good Job!
mine:
buzz_lightyear said:
me too... 1.18.00 )
How to backup own radio:
d2s 60000000 00300000
Click to expand...
Click to collapse
how about backup all in 1 lines
backup OS ROM , Radio , EXT ROM ??
d2s 80000000 02000000
d2s 60000000 00300000 sd a
d2s 70000000 01080000 sd a
First command means "backup the OS"
Second means "append Radio backup to SD"
Third means "append ExtROM backup to SD"
buzz
please,
anyone to explain me the meaniong of the strings ?
where should I type them ?
The explanation is here:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
buzz
very kind.
thanks a lot
buzz_lightyear said:
The explanation is here:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
buzz
Click to expand...
Click to collapse
The explanation from this site is very helpful,
Thanks,
Hi Guys,
i downloaded the himalaya update for win mobile 2003. Now I have a problem. The phone which was 1.72.01GER, extROM 1.72.184, radio - 1.17.00 now has become 2.02.t1WWE, radio 1.18 (NO EXTROM version),but the extended ROM is still in german and will not let the new version install. I have to rest the PDA to use it. But most of it seems to work well. I have tried to install the 1.72.181 WWE version, but I get langage id errors (I tried GER, WWE).
There was a note with the installation that said do not let TDxxxx.exe run, in config.txt. I have no idea were to find the file.
please help.
Could it possible to erase all of the rom and install a new version altogether? or erase the ext rom alone? If yes then HOW????
I am not using O2's services in India.
Thanks a million.
Hope what i have written makes some sense.
tykumar said:
Hi Guys,
i downloaded the himalaya update for win mobile 2003. Now I have a problem. The phone which was 1.72.01GER, extROM 1.72.184, radio - 1.17.00 now has become 2.02.t1WWE, radio 1.18 (NO EXTROM version),but the extended ROM is still in german and will not let the new version install. I have to rest the PDA to use it. But most of it seems to work well. I have tried to install the 1.72.181 WWE version, but I get langage id errors (I tried GER, WWE).
There was a note with the installation that said do not let TDxxxx.exe run, in config.txt. I have no idea were to find the file.
please help.
Could it possible to erase all of the rom and install a new version altogether? or erase the ext rom alone? If yes then HOW????
I am not using O2's services in India.
Thanks a million.
Hope what i have written makes some sense.
Click to expand...
Click to collapse
Search around for ExtROM posted by ZeroExtreme, DCS or SIN. It's probably zipped up or in .EXE file. But the final file you are looking for is ms_.nbf.
Put it together with your ROM nk.nbf file and re-run the upgrade again.
You can skip the RADIO .nbf file to save some time.
thanks Henry. Will try your solution and let you know.
OK, I've finalised an RUU Updater with inclusive tools to allow you to Bake your own ROMs from the ones already out there
this does NOT mean you can edit the OS files, simply mix'n'match
The RUU Updater also will run the SSPL for you meaning that you can use this RUU to flash *ANY* ROM to your PDA even if it is fresh out of the box (but please do take care when doing so)
There is no NBH included in this file, and you will need to place one in the directory you extract this to in order to run it.
Eventually I will release a GUI app to simplify the ROM baking process, but for now, feel free to experiment, and remember, you *CAN* delete components from the NBHGen sample file (say for example you didn't want to flash a new Radio), but please remember to ensure that all files are named correctly.
Download: (UPDATED VERSION, INCLUDES AUTOMATED GUI TOOL)
ftp://xda:[email protected]/Hermes/Tools_and_Programs/ModifiedRUUUpdater-V2.rar
Please note that the GUI tool is relatively primitive; please keep all files INSIDE the workshop folder, thanks
Credit:
- Credit to Pof et al. for NBHextract
- Credit to Bot for NBHGen
- Credit to Des for SSPL
- Credit to me for some rubbishy fiddling around
Olipro said:
OK, I've finalised an RUU Updater with inclusive tools to allow you to Bake your own ROMs from the ones already out there
this does NOT mean you can edit the OS files, simply mix'n'match
The RUU Updater also will run the SSPL for you meaning that you can use this RUU to flash *ANY* ROM to your PDA even if it is fresh out of the box (but please do take care when doing so)
There is no NBH included in this file, and you will need to place one in the directory you extract this to in order to run it.
Eventually I will release a GUI app to simplify the ROM baking process, but for now, feel free to experiment, and remember, you *CAN* delete components from the NBHGen sample file (say for example you didn't want to flash a new Radio), but please remember to ensure that all files are named correctly.
Download:
ftp://xda:[email protected]/Uploads/Hermes/ModifiedRUUUpdater.rar
Credit:
- Credit to Pof et al. for NBHextract
- Credit to Bot for NBHGen
- Credit to Des for SSPL
- Credit to me for some rubbishy fiddling around
Click to expand...
Click to collapse
I made NBH radio only upgrade posted here:
Here are Radio ROMs:
1.27 http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
1.33 http://uploadingit.com/files/8194/NBH Radio Only 1.33.31.00.zip
1.34 http://uploadingit.com/files/8194/NBH Radio Only 1.34.00.10.zip
Just a note: there's a GUI for the workshop now; remember that you don't have to create a NBH with EVERY .NB and you can select which ones to include (therefore, IPL and SPL can generally be discluded)
Thanks For The Files wpbear. Hopefully The First Of Many Cooked Software To Come From This Forum Now We Have Discovered The Secrets Of Our Hermes.
Cheers
will this still push SSPL onto the device while it is in bootloader mode? if so then this is the breakthrough everyone has been wanting for device recovery...
Olipro said:
Just a note: there's a GUI for the workshop now; remember that you don't have to create a NBH with EVERY .NB and you can select which ones to include (therefore, IPL and SPL can generally be discluded)
Click to expand...
Click to collapse
Nice GUI, not that DOS was real hard but the GUI is more convienent. Thanks
Still looking for a way to put my custom Ext_ROM into a nb file so I can truly cook my own ROM.
I Have A Problem When I Try And Start The GUI. I'm Assuming The GUI Is The File 'ROMBaker.exe' When Ever I Try To Run It, I Always Get An Error Saying 'The application failed to initialize proerly' Any Ideas?? Quick Question Was The GUI Written In C?
Cheers
do you have the .NET framework installed onto your machine??
mousey_ said:
I Have A Problem When I Try And Start The GUI. I'm Assuming The GUI Is The File 'ROMBaker.exe' When Ever I Try To Run It, I Always Get An Error Saying 'The application failed to initialize proerly' Any Ideas?? Quick Question Was The GUI Written In C?
Cheers
Click to expand...
Click to collapse
no, I wrote it with Visual Studio 2005, so you need .net framework 2.0
walshieau said:
will this still push SSPL onto the device while it is in bootloader mode? if so then this is the breakthrough everyone has been wanting for device recovery...
Click to expand...
Click to collapse
no, not even HTC could pull that off.
Olipro said:
no, not even HTC could pull that off.
Click to expand...
Click to collapse
hahaha thought so...
The GUI part NBHExtract is not working, it just sits there, gives no feedback or HD activity. I have all .Net installed 1, 2 and 3.
Generate NBH works to make your txt file. Then go to CMD prompt to run "nbhgen" [txt file].
I created New Cingular ROM with upgraded Radio and SPL 1.04.
Cingular WWE
OS/Ext_ROM (standard) 2.06.502.3
Radio 1.34.00.10
SPL 1.04
wpbear said:
The GUI part NBHExtract is not working, it just sits there, gives no feedback or HD activity. I have all .Net installed 1, 2 and 3.
Click to expand...
Click to collapse
thanks, I'll check this out and release a fixed one if it's not working
Yes, my mistake indeed, I wasn't cleaning that string properly,all sorted.
either redownload the RAR file or download the attached ROMBaker.exe and overwrite the old
Nice Work Olipro.
Would It Be Possible For You To Write A Quick Walkthrough On How To Use Your ROMBaker Tool?
Cheers
Thanks OLIPRO, great job man.
Olipro said:
Yes, my mistake indeed, I wasn't cleaning that string properly,all sorted.
either redownload the RAR file or download the attached ROMBaker.exe and overwrite the old
Click to expand...
Click to collapse
The new RomBaker still bad for me. The NBHextract opens a quick DOS box then immediately closes, no extraction.
yes, fixed everything now, and tested it properly, my mistake.
RUU on FTP is updated, or use the new attachment
Olipro said:
yes, fixed everything now, and tested it properly, my mistake.
RUU on FTP is updated, or use the new attachment
Click to expand...
Click to collapse
Works! Thanks.
Too good, just flashed 3.3 test OS, spl 1.04 and radio 1.27,piece of piss.
Great Job
i just got an old mda phone...the old one...
im still using WM4..
ROM version A.30.09 ENG
ROM DATE 01/01/04
RADIO VERSION : 3.23.00
can i upgrade it to WM5??how???tell me..thanks
http://www.romkitchen.de/
all the roms there are
there will never be a wm5 for wallaby because it dont have
flash the same way as the later devices
and wm5 requires that
Rudegar said:
http://www.romkitchen.de/
all the roms there are
there will never be a wm5 for wallaby because it dont have
flash the same way as the later devices
and wm5 requires that
Click to expand...
Click to collapse
hmnmmm..how use this rom??which one i have choose at romkitchen.de??
im still dont understand bout WM5,,WM5 its same with WM2003???
you pick the one you like to have
about wm5 then no wm5 is very very different from wm2003
with wm2003 the memory is devided between storing data
and running programs
in wm5 all! ram is for applications
and flash is for storing data on
on later devices then wallaby the user can access flash to put data on
on wallaby you cant
so even if somebody spend the months it would prob take to make a rom for wallaby one would not even be able to put a contact or phone number on it
let alone a program to make application memory into storage
oh..thanks..i already cook the roms,,,its working fine...
can u tell me about nbf files??how to install it???
arxxx said:
can u tell me about nbf files??how to install it???
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
i hv try it with XDAtools..but when i try to write a nbf files its always error..
at what step does it give an error
what error does it give
what nbf file are you trying to feed it
what SD card are you using
what SD card reader are you using
....
our friend mithuncmenon found a Wm6.1 Rom for gene he has upgraded and i have also upgraded it is real and kewl
Download
http://www.filefactory.com/file/31fda8/
file name is : gene_wm61_wwe.rar
Will Upload More Mirrors
here is the nfo which i found and i have translated it
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for marry.
Preparation XIP'a and OEM-softa - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov. Entire soft from the system part of vindy and OYEM of soft is left as is. Size PagePool'a - 6 MB.. Installation.
1. BEKAP!!! Since y axis you changes, then to use complete bekapy of the system, type Sprite Backup, SPB Backup is impossible. You will preserve PIM information (contacts, bells TP) with the aid of program PPccPimBackup.exe.
2. CID Unlock. If with the load of device you see in the left upper angle in the second line "SPL y.y0..Olip", can pass this point, otherwise read, what to make: For the piercing of home-made piercings for the beginning it is necessary to place on device HARD SPL - this patchennyy SPL, which makes it possible to stitch through the piercings, nepodpisannye HTC, and without checking of their regional belonging. For this copy program gene_.hspl.exe to devays, and you will neglect it there. It perezagruzitsya after devays, and you must see with the load version SPL - y.y0..Olip
3. piercing. You aktivsinknite devays, and you will neglect program ROMUpdateUtility.exe. Place galochki, press Next. Do not survive, after seeing, that you renew to version 1.0.0.0. This is version nbh- file, but not the version of piercing. I is very grateful mUn'u both for portirovaniye of 'ki on I marry and for its invaluable help to me with portirovanii WM61.
Successes.
Aleksandr orefkov.
Click to expand...
Click to collapse
but according to me the response is very slow if u click on a application takes more time to repond even in navigation of ontacts everywhere and this rom is fully loaded and lite it has everything loaded
The response time is okay in my device. But the device takes more time to boot. And also the rom is a fully packed one...not lite version...nyways enjoy the new rom....
Thank u Mun_Rus & Orefkov
guys, we should thank mun_rus and orefkov for this upgrade... its their creation... Well, this upgrade was created with the oem & sys folders as is and only the .vm and xip was greloced... the gene wm6.1 kitchen which mun_rus is working on...
i did a lil remap of the packages inside this and deleted windows live (which doesnt work anyways), some useless tsk files, some images, transcriber, stock games and windows update (which also doesnt work).. added a few usefull packages and got a rom with good storage and with working packages
few steps explained in my thread
this is WM6.1 ROM released by orefkov on 4PDA nearly a month back
Thanks to mun_rus and orefkov for this upgrade. Ababrekar, if you have ur custom WM6.1 rom created, please publish the links.
Hey Should i download this rom then?
is it possible to remove useless things?
mithuncmenon said:
Thanks to mun_rus and orefkov for this upgrade. Ababrekar, if you have ur custom WM6.1 rom created, please publish the links.
Click to expand...
Click to collapse
i have a rom which is customised to my needs friend.. i dont know if anyone wants to go for it.. its kind of my first cooked rom, so there may be bugs too.. like for instance, gene hangs on the screen alignment mode.. u ve to reset 2-3 times and wait for the touch to enable (it works though) if everyone wants then i'll upload and share the link.. got a slow connection so will take lil time
ams1576 said:
Hey Should i download this rom then?
is it possible to remove useless things?
Click to expand...
Click to collapse
yes it is possible... information on the steps mentioned in my thread.. ask for experts guidance too alongwith it coz i'm no expert, only a learner and sharing my information
There is right translate of readme.txt.
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for Gene.
Preparation of XIP and OEM's soft - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov.
Entire software from the system part of Windows and OEM's software is left as is. PagePool size is 6 MB.
Installation.
1. BACKUP!!! Since your OS is changed, then to use complete backups of the system, (i.e. Sprite Backup, SPB Backup) is impossible. Backup your PIM information (contacts, call logs and other) with program PPCPimBackup.exe.
2. CID Unlock. If on reboot of device you see in the left upper corner of screen in the second line "SPL 1.10.Olip", you can pass this point, otherwise read, what to make: For flashing of home-made ROM's for the beginning it is necessary to place on device HARD SPL - it is patched SPL, which makes it possible to flashing unsigned ROMs, and without checking of their regional belonging. For this copy program gene_hspl.exe to device, and run it. Device will reboot, and you must see version of SPL - 1.10.Olip
3. Flashing. Sync device with ActiveSync, and run program ROMUpdateUtility.exe.
orefkov said:
There is right translate of readme.txt.
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for Gene.
Preparation of XIP and OEM's soft - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov.
Entire software from the system part of Windows and OEM's software is left as is. PagePool size is 6 MB.
Installation.
1. BACKUP!!! Since your OS is changed, then to use complete backups of the system, (i.e. Sprite Backup, SPB Backup) is impossible. Backup your PIM information (contacts, call logs and other) with program PPCPimBackup.exe.
2. CID Unlock. If on reboot of device you see in the left upper corner of screen in the second line "SPL 1.10.Olip", you can pass this point, otherwise read, what to make: For flashing of home-made ROM's for the beginning it is necessary to place on device HARD SPL - it is patched SPL, which makes it possible to flashing unsigned ROMs, and without checking of their regional belonging. For this copy program gene_hspl.exe to device, and run it. Device will reboot, and you must see version of SPL - 1.10.Olip
3. Flashing. Sync device with ActiveSync, and run program ROMUpdateUtility.exe.
Click to expand...
Click to collapse
Active Sync for emails does not run with ROM as well as this issue was with WM6. Certificates could not be installed on WM6.1 and windows default certificates are also not available in this ROM. Please resolve this issue.
I work on this problem.
don't you try to use the extrom for os.nb?
look its importan to have the windows default certificates ??? and what the need for it???
shahkh said:
Active Sync for emails does not run with ROM as well as this issue was with WM6. Certificates could not be installed on WM6.1 and windows default certificates are also not available in this ROM. Please resolve this issue.
Click to expand...
Click to collapse
Solved. Just create dir - Windows\System\CertDtls
2 ababrekar
Before make your rom, in initflashfiles.dat:
after line
Directory("\Windows")ermDir("System")
add line
Directory("\Windows\System")ermDir("CertDtls")
orefkov said:
Solved. Just create dir - Windows\System\CertDtls
2 ababrekar
Before make your rom, in initflashfiles.dat:
after line
Directory("\Windows")ermDir("System")
add line
Directory("\Windows\System")ermDir("CertDtls")
Click to expand...
Click to collapse
I successfully installed my company certificates but still Active Sync for my company emails is not working. It show error "The Security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server" - Support code: "0x80072F06". Same certificates I installed on my WM6.1 are working on WM5 official ROM. Please guide further.
shahkh said:
I successfully installed my company certificates but still Active Sync for my company emails is not working. It show error "The Security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server" - Support code: "0x80072F06". Same certificates I installed on my WM6.1 are working on WM5 official ROM. Please guide further.
Click to expand...
Click to collapse
Try the follow:
Download 4pda.ru/forum/attach/1462149/gene_cert_fix.zip.
Its small soft pack for fix certificate problem in custom ROMs for Gene:
WM6 WWE (mUn)
WM6 RUS (mUn & orefkov)
WM6 RUS Clear (mUn & orefkov)
WM61 WWE (mUn & orefkov)
WM61 WWE min rus (mUn & orefkov)
Usage:
Unpack archive to temporary folder.
Copy file ruu_signed.nbh from your ROM to this folder.
Run file make.cmd
After it work, if in this folder exist file ruu_signed.nbh, copy it back to folder with RomUpdateUtility.exe, and flashing your device.
Good luck.
hey bro can u release a lite version of 6.1 wud be really nice ...........
WM61 WWE min rus (mUn & orefkov) this means 6.1 lite is also available right can anone get me tat