I decided to open this new thread in order to spread this new updates amongst us. There are at least two of these roms working on our prophets.
The names:
Prophet_WM6_17944_TrueNeytral_1.6clean
KOSTER V3. Build 17944
More info here
HERE THE LINKS TO MOST OF THE ROMS
TRUENEYTRAL 1.1 http://www.savefile.com/files/586280
K0ster v2rapidshare.com/files/30153373/wm6wwerus17217v2.rarv
TRUENEYTRAL 1.2 clean http://www.savefile.com/files/689350
TRUENEYTRAL 1.3 (WIFI not working)
TRUENEYTRAL 1.4 widcomm bluetooth, camara 4... and other superb features...
TRUENEYTRAL 1.4 with MS Bluetooth Stack (instead of Widcomm) Not incl. camera 4. If you don't want russian keyboard to perform just follow DEVILDUCK's procedure here in post #180 THANKS!
SOLUTION for keyboard in latin font: ..##just for older ver. than 1.2##
Install wwe cab from post
Dialer in latin typo (see attac)
THANX 2 scooby1, trueneytral1983, nostramo, tiggerbcn and other fellas
Hello, I as you know also have the TrueNeytral and the charge of battery for usb me works perfectly and in the car also, in the PC it charge me between 210 - 280mA. The only problems are the Russian characters, for the rest it goes very thin. Greetings
Please post installation instructions/link to install info (Must downgrade? etc.)
Thanks, Eladio
To install TRUE follow normal procedure to WM6
That's:
-Downgrade to aku 2.20... If you previously had a WM6 or aku 3.3..
-Activesync 4.5
-Conect prophet via USB in normal status (not necessary to place it in -BOOTMENU)
-Execute upgrade utility (a .bat file)
-Wait no longer than 15'
-Dont touch anything, i recomend turning communications or phone off
-Anything happens in appearence but after pc message in MSDOS, hard reset -must be done.
-Now you are done.
It would be great if a russian speaker could give some info from 4pda.ru forums to change .dll in order to switch language typography in this rom.
Thx dudes
tiggerbcn said:
The only problems are the Russian characters, for the rest it goes very thin. Greetings
Click to expand...
Click to collapse
It's not a problem, it's a feature
cesardeluxe said:
-Wait no longer than 15'
Click to expand...
Click to collapse
Sure? Normally you schould wait 15-30 minutes till upgrade process is complete.
redandr said:
Sure? Normally you schould wait 15-30 minutes till upgrade process is complete.
Click to expand...
Click to collapse
This is the stimated time i have been experiencing, anyway is i wrote, and many others did... You should not unplug usb until system tells you to.
cheers
I've installed TrueNeytral a couple hours ago. Registry change of Keyboard is not working for me, but Resco Keyboard yes.
If i change registry of IR my Prophet restarts each time switch on . Original values are '15' (not '14' as you say).
Also some original ring tones (setup/personal/phone) are not recognized as valid wma files.
Eladio.Linares said:
one) are not recognized as valid wma files.
Click to expand...
Click to collapse
Check if they're called like filename .wma and remove the space.
redandr said:
Check if they're called like filename .wma and remove the space.
Click to expand...
Click to collapse
Thanks, it works.
Hi all.
I've been using TrueNeytral WM6 two days. Actually for me is the best WM6
implementation I've flased to my dear prophet. Things I've used:
-USB, Wallet and car charge, all work fine (car charger required software
reset with cable plugged to works).
-WiFi: I've wireless router to internet, with no problems starting/stopping WiFi.
Windows Live, Google Mail, everything OK. Configuration resists software
resets.
-GPRS: OK, corporate mail (Lotus Notes) working perfect.
-Bluetooth: Stereo Sony HBH DS970, handsfree Jabra bt-150, freedom bt
keyboard, parrot ck 3000, GPS Zaapa. Multiple connections (parrot & GPS)
work, tomtom returns after receiving a call (this is the first ROM to do this)
ActiveSync over BT to my desktop working also (TrueConnect over BT!)
-IR: NoviiRemote working with no tweaks. Changing registry as stated at top
of this thread for IR gets my prophet to shutoff completely when hibernate,
so i cannot use file and vcard transfers over IR, but I think this is a OBEX
problem, because IR port is working for NoviiRemote.
-I have no incompatibility at all. WisBar and SPB Backup is supposed to get
into trouble, but not for me.
-Finally, battery drain is correct. I've been monitoring two days, and
consumes 4-5% at night and 30-35% with normal use; checking once an
hour mail with GPRS and 30-40 min. call.
-Cannot map HW buttons 1 and 2.
It seems to be near RTM...
Thanks for posting this ROM, and of course to the author.
Eladio.
How did you get rid of the Russian characters?
floepie said:
How did you get rid of the Russian characters?
Click to expand...
Click to collapse
Setting Regional info (Spain) and installing Resco Keyboard... I'm not sure what you mean...
Hope this help.
Eladio
...from the 1st post here. Russian in keyboard, contacts, and dialer. So, just changing the region corrected that issue?
floepie said:
...from the 1st post here. Russian in keyboard, contacts, and dialer. So, just changing the region corrected that issue?
Click to expand...
Click to collapse
Ah!
Russian Keyb: Install Resco Keyboard and SPB Full Keyboard with dictionary completition. These are apps I use normally.
Contacts: Again Pocket Informant & Pocket Breeze, I don't use standard apps from M$. Pocket Informant traps links to std apps, so 'contacts' is hidden for me.
Dialer: I've installed cabinet from first post, but normally use voice command over bluetooth handsfree to dial.
I'm trying to isolate me from lang/reg issues. The cost is to have to install these apps...
I have come across with a post in a spanish forum where they got rid of russian characters. It has to do with a .dll. i think they succed. I will post the how to ASAP
This one also has the problem of turning itself on constantly with an Exchange account.
One more: cannot control volume of incoming call. It is set to maximum, and volume indicator seems to work but there is no real effect over volume.
Eladio.Linares said:
One more: cannot control volume of incoming call. It is set to maximum, and volume indicator seems to work but there is no real effect over volume.
Click to expand...
Click to collapse
Yeah! I've got the same problem... But this problem happened to all Crossbow ROM as i've been trying around many ROMs. Nothing can be solved... i guess.. it's bcoz incompatible sound driver...
cesardeluxe said:
I have come across with a post in a spanish forum where they got rid of russian characters. It has to do with a .dll. i think they succed. I will post the how to ASAP
Click to expand...
Click to collapse
Is there any news for the russian characters in keyboard & contacts?I'm with Prislav V3 now... Sound problems...
WLM not working (Device model name PM320)
No Windows Update
Related
Hello,
i downloaded the new version RUU_Hermes_2.05.261.1_6275_1.34.00.10_108_HTCRUS.
This is test only version. and official?
up!
When will a official release?
works great so far.
Significally faster than the original Russian TyTN ROM.
Any problems so far?
Dear all, who tried RUS AKU3.3 ROM!
Did you encountered any problems? Anything doesn't work? Or whatever else? I'm using Herm for business and basically prefer not to risk change one buggy ROM on another? I heard on wwe/swe versions that besides "it works faster" there were some new bugs?
It would be great if someone can share his new rus ROM experience summary to everyone here. Thanks in advance.
Konstantin K. said:
Dear all, who tried RUS AKU3.3 ROM!
Did you encountered any problems? Anything doesn't work? Or whatever else? I'm using Herm for business and basically prefer not to risk change one buggy ROM on another? I heard on wwe/swe versions that besides "it works faster" there were some new bugs?
It would be great if someone can share his new rus ROM experience summary to everyone here. Thanks in advance.
Click to expand...
Click to collapse
BlackBerry Connect does not work. All other things are fine so far since yesterday.
depends on what business you're in
more problems were solved than created for me, business use mainly.
1) no WPA2
2) frozen incoming call (muted) notification. The "incoming call" window just stayed there on top of everything else AFTER the other party hang up. Happened only once.
Some problems with the AKU
1. A2DP does not work propelly - it has drops
2. Dial-up networking does not exist anymore which is extrimly bed surprise as i am travel a lot and use one for laptop communication with office.
The rest is Ok so far
this ROM work faster in comparison RUS ROM 1.18.261.1?
Sharing my first experience on new AKU3 RUS ROM (comparison to Russian official ROM, dated summer 2006, never reflashed before)... (I used this instruction for flashing http://forum.xda-developers.com/showthread.php?t=293085 and i didn't flashed GSM update).
1) It works faster. I never measured, but subjectively it's like 5-15%, and basically on my device it was not like a general speed increase, and rather like this: any delay if it occurs, seems to be smaller - for example I use several programs sitting in memory and I use SPB Diary today plugin, on I switched to its tabs for the first time I got a delay for a second. Now it's more like a half of a second. But it's not a 50% increase of cause - less. And on the other side - I noticed that sometimes delays increased: on startup I have to wait a bit longer for a security code window become active since it's drawn on the screen. As before I could type my pin right after, no I have to wait for a second or two.
2) It works stable for me. in general ok, no problems or complaint as a result of one days usage: SPB P+, SPB Diary, SPB Time, SPB Weather, PExcel, Outlook (Pop3, MS Exchange), SMS, Internet via GPRS, BT headset (but i don't use voicedial), USB ActiveSync- all work fine with no problems. What is o/s which I'm going to test soon: wifi, ICQ, Skype.
The only problem I faced - i don't know the reason, but I have a bug with time setting, when was coming through a first time reboot and extrom execution. I started device after flashing for the first time, was passing through customization and at the time I was setting my clock (I set it, selected timezone, pressed ok or "äàëåå") ExtRom execution started and I was no able to do anything else. Then it finished, my device rebooted and my time was 12 hours forward (e.g. 1PM instead of 1AM). And when I tried to correct this (correct time by 12 hours back) - all my meetings and events mooved and for ex. Birthday that was set to 01MAR was shown on 28FEB )). So I was confused by this. So I had to delete all PIM data, and reconnect it to my outlook once again making full synchro.
That's my experience so far. If you have any ideas on running a test program to measure productivity - you're welcome. We can do it.
Which .NET CF version does it have built-in?
sorry what not in English) может пробывал кто A2DP ? как ведет себя булутз стерео с новым АКУ 3.3 ? заикается?
Заикается и еще хлеще чем в 2.3! Sorry for Russian.
Thx!
It is very bad
ivanov_sibbereg said:
2. Dial-up networking does not exist anymore which is extrimly bed surprise as i am travel a lot and use one for laptop communication with office.
The rest is Ok so far
Click to expand...
Click to collapse
Dial-up Networking just got renamed to "Îáùèé Èíòåðíåò", enjoy
oBACIOTKAo said:
sorry what not in English) может пробывал кто A2DP ? как ведет себя булутз стерео с новым АКУ 3.3 ? заикается?
Click to expand...
Click to collapse
Hello, BACIOTKA, nice to meet you at this forum too.
With ACU3.3 A2DP skipping issue is solved for me. No more skippings.
But there is a big sound distortion at high frequrency.
So the sound is still not good.
Hi! It`s still unclarified for me, do I HAVE to do all the steps written in the http://forum.xda-developers.com/showthread.php?t=293085 thread? My device is HTC-branded and hasn`t been CID-unlocked and flashed (QTEK_A07, bootloader 1.04, ROM version 1.18.261.1). Can I just flash the update or it won`t work? Is it final ACU3.3 update for russian devices or just a beta/test release? Thanks!
bobstarina said:
Hello, BACIOTKA, nice to meet you at this forum too.
With ACU3.3 A2DP skipping issue is solved for me. No more skippings.
But there is a big sound distortion at high frequrency.
So the sound is still not good.
Click to expand...
Click to collapse
HI!! And I now use A2DPfix though a little but stutters have disappeared) I till now on native ROMe
In regards to the ROM download
Hey guys,
Would do me HUGE favor and post the lisk to download the ROm or if you have upload it to rapidshare or anywhere else.
ПОМОГИТЕ НАРОД
http://bbs.pdafans.com/thread-314364-1-1.html
Look there. I'm not as much experienced as many of you are, therefore I'm asking you first. Is this really wm6 charmer rom?
i don't know, i'm not speeking japanese
well, seems to be...will try today, hope rom will not be japanese :-D
ok nocturne, hoping it will work if so, I'm definatelly gonna have some questions for you
well, just flashed WM6 five minutes ago. something you have to know:
1) this ROM IS wm6 finally !!!
2) YES, this ROM is realy WORKING WM6, including radio rom, camera, bluetooth (maybe it's behaviour is a little bit strange, maybe it is problem of my poor old MA700 bluetooth, which i'm running on Vista - it has never run well even on xp )
3) does not looks to be as fast as some debranded roms with wm5, but seems to be extremly fast as it is in beta stage. fast as roms filled with tmobile junk, if i could compare
4) ActiveSync 4.5 and Viasta's WMDC seems to be working much faster
5) windows update included inside wm6 is looking to do something
6) standart feautures of WM seems to be working correctly...does not look to be somehow special in this way
7) system startup is REALLY FAST - nearly like old iPAQs are...well, not as fast, but it is twice faster than WM5
Finally - this ROM seems to be...hmmm...somehow...little bit...chinese :-(
Willl provide more info if my employer will not kill me - this is not a testing machine, but the only phone i have :-D home I'll survive few days with chinese OS....
nocturne, come on ICQ, waiting for you there
so it's only in chinese
yes, I flashed this rom as well. It works in 100%. We're (me and nocturne) trying to figure out how to replace mui files now so to make it an WWE version.
oh,really cool guys.
It will be possible to donwgrade to a WM5 after the upgrade?
of course.
Working well
Well, I have flashed the ROM as well (2007-03-14_Charmer_WM6_OS_MSYH_Clean_Consam_xBeta) and I think it is very fast (seems to me being faster than all WM5 ROMs I have tried). Chinese is the only "problem", will test it more.
Guys, hope you will manage the translation. Good luck.
EDIT: The only thing not working is Contacts application. Does anyone has the same problem? The applications does not even start.
Radek
no problems with contacts app - but is not mapped to common contact button, that's the only problem i see. calendar is not mapped to its button as well.
have look at smartdialing - it is excellent, finaly no problems using czech characters, no more tweaknig dll's necessary
for the first look, a havedecided that this rom does not contain word, excell etc - my info was wrong. they are just grouped into "office mobile" icon...
some strange behavior still remains - i have lost icons for notes and two other (unknown) apps. their link from program targets some help file, of course chinese running notes executable directly works well - it's strage. i have none application installed as i want to test stability of basic OS, not third party applications...
P.S.: still charmed by fast system bootup, reseting again and again just to se if next bootup will be as fast as previous :-D
Well, I know that it's not mapped to the button. But the application is not running, seems that it's starting but stops immediately. Well, Contacts app is the most important one for me So I revert to WM5 again and wait for other ROM. By the way, which ROM are you using, because there were 4 ROMs to download?
nocturne.op.15 said:
no problems with contacts app - but is not mapped to common contact button, that's the only problem i see. calendar is not mapped to its button as well.
have look at smartdialing - it is excellent, finaly no problems using czech characters, no more tweaknig dll's necessary
for the first look, a havedecided that this rom does not contain word, excell etc - my info was wrong. they are just grouped into "office mobile" icon...
some strange behavior still remains - i have lost icons for notes and two other (unknown) apps. their link from program targets some help file, of course chinese running notes executable directly works well - it's strage. i have none application installed as i want to test stability of basic OS, not third party applications...
P.S.: still charmed by fast system bootup, reseting again and again just to se if next bootup will be as fast as previous :-D
Click to expand...
Click to collapse
Is this ROM originally really Chinese?
Guys when I look into \Windows folder there are many DLL files with .0804 extension. Doesn't that mean that the ROM is originally not Chinese? If I'm not wrong, those extensions are used for translated files (MUI). Other interesting thing is that there are many english file names, eg. in \windows\AppButtons.
What do you mean about that?
melvincz: you could be right. I'm not 100% sure though. Don't even try to delete those files, you're system will freeze at 1st or 2nd splashscreen.
I flashed the 2007-03-24 rom_plus_consam and the contact application works fine for me.
download mirror
can you upload this rom to rapidshare or somewhere else. my download speed from china is terrible. thanks
uploading... will be done in like an hour
Would that be including the English mui files by chance?
http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
no english mui.
vlodeck said:
http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
no english mui.
Click to expand...
Click to collapse
thank you very much
Ok here it is Prophet Touch V5
Whats new:
X-button 1.51 - BTFTP 1.2.30234.2 - ArcsoftMMS 4.0.31.23 uppdated
Netwizard - gif player - Transcriper - HTC phone pad - BT A2Dp works
the new contact manager from tena "Babel" Link to babel now with posabilety to use themes and slide2unlock are located in the extrom
Using the old camera because it uses less battery... there is a cab for the new camera on http://gullum.4shared.com/ with one small bug the panorama does not work it givs an error about not enough memory I'll try to fix that
I have removed VOIP for this version will be included in next version when I've figured out a way to use the extrom more whichly.
I moved back to the battery status from V3 because it also shows cup.
step 1. same as alwayes see Here
Step 2. http://gullum.4shared.com/ 4 & 8 MB Pagepool
Rapidshare link 4 MB Pagepool
Rapidshare link 8 MB Pagepool
T9 Landguages
View attachment T9_landuages.CAB
View attachment 45778
adds:
Danish, Finish, French, German, Italian, Norwegan, Portugese, Spanish and Swedish
The cab installs all, but zip can be unziped and then just move the one you want into the windows folder of Prophet
A2DP
A2DP is working but needs some steps to work.
Step1. first Pair headset with phone then turn of bt headset and bt on phone.
Step2. turn on BT on phone then turn on BT headset and it shout pop up the BT Sterio icon on topbar.
For thoses that want powertray and WIFItray here is a addon View attachment Tray_fixes.CAB
Tips
Battery status has an option called CpuScaler it's nice when you use the phone alot.. but it uses battery when the phone is in standby because it will acualy keep the cpu buissie trying to keep it at the lower setting.
What I do is I overclock to 260 and let Battery status show cpu then I can just tap the 195 or 260 to get the speed I wan't and when going to bed just set it to 195Mhz and the battery usage is almost nothing
hola gullum,
big thx for your great work...
but whats about the 4 and 8 MB versions. what are the differences?
dadio said:
hola gullum,
big thx for your great work...
but whats about the 4 and 8 MB versions. what are the differences?
Click to expand...
Click to collapse
8MB is a bit faster and 4MB has more ram
downloading.....Thank you very very much, Gullem! It's a little bit disappointing that the new camera more or less tarnishes all rom masters' talent though.....^^
Note 1:
V5 final is as fast as your series before (to be honest, much more faster than the well-known version especially surfing the internet), but Voice Speed Dial can't be initiated by handsfree, same as V4....(this issue has been solved by V5bera...) Could it be possible for you to release a patch for that? Thank you very very much!
Note 2:
As same recharge problem as before (it happened sometimes when I using G4 and G5beta), nothing changes when the device is linked to USB...don't know why. (It's hard-resetted after flashing). The only solution is to soft-reset the device to get it around...
Note 3:
X button on the upper-right corner works like a charm (sorry to borrow your own words), though the x problem never occured to me with V4 and V5beta.
Hellooo Gullum,
What is the difference between this rom and PDAVIEt 4.0.0.0.6 ?
except Transcriper and working BT A2DP ?! and i don't know if you like the transparent Home plug in Icons, but i will upload them anyway, so if you like it you can use them in your roms
By the way, I admire your enthusiasm...
hma4 said:
Hellooo Gullum,
What is the difference between this rom and PDAVIEt 4.0.0.0.6 ?
except Transcriper and working BT A2DP ?! and i don't know if you like the transparent Home plug in Icons, but i will upload them anyway, so if you like it you can use them in your roms
By the way, I admire your enthusiasm...
Click to expand...
Click to collapse
This rom has somethings that PDAVIET don't have. as u menthioned Transcriper, working BT A2DP htc thouch intellipad BT FTP and probable some other things, but PADVIET has some thing I think that I havn't included Flash And Adobe reader.... and this rom is bigger withch gives 2MB more room for stuff.
I will download the homeplug icons and see
P.S. My GF hates my enthusiasm
P.P.S you I realy realy like the icons I had then but some how I never tested them..
gullum said:
This rom has somethings that PDAVIET don't have. as u menthioned Transcriper, working BT A2DP htc thouch intellipad BT FTP and probable some other things, but PADVIET has some thing I think that I havn't included Flash And Adobe reader.... and this rom is bigger withch gives 2MB more room for stuff.
I will download the homeplug icons and see
P.S. My GF hates my enthusiasm
Click to expand...
Click to collapse
hahahaha !! man, my GF hate my enthusiasm too ..))))
Great! I have waited for long time. I am going to download it and flash it. I will give you a report later today.
Hi
You said the a2dp is working, does that mean the sound quality is like Fantastic rom with the new MS bluetooth stack? if so I will give it a go.
Thanks
sigh....the response i posted above remains no-reply for the fourth times. Guess that Mr. Gullum seems not very happy with responses from orientals (a similar message posted by another oriental, a Chinese in that case, implied the same suspicion . Anyway, time to flash again....
iiiox said:
sigh....the response i posted above remains no-reply for the fourth times. Guess Mr. Gullum seems not very happy with response from orientals (a similar message posted by another oriental, a Chinese in that case, implied the same suspicion . Anyway, time to flash again....
Click to expand...
Click to collapse
How, not replying to couple of posts has anything to do with race ?!! he has been working on these ROMs for days and nights!! the man has a family, he also has to sleep!! Give him a break!! the least you can do is try the ROM yourself, and respect who made it.
PS: how would he know you are oriental ?!!
Kiwi_hknz said:
Hi
You said the a2dp is working, does that mean the sound quality is like Fantastic rom with the new MS bluetooth stack? if so I will give it a go.
Thanks
Click to expand...
Click to collapse
Gullum said that he was going to include the A2DP driver from Fantastic rom into the V5. I am downloading now and will check it out. Will let you know later. The sound quality of the BT stereo is also my main concern for choosing the rom to use. That is why I am using Fantastic B4 despite the bugs there.
hma4 said:
How is not replying to couple of posts has anything to do with race ?!! he has been working on these ROMs for days and nights!! the man has a family, he also has to sleep!! Give him a break!! the least you can do is try the ROM yourself, and respect who made it.
Click to expand...
Click to collapse
Thanks for the reasoning. I do understand the way to respect others. Mr, Gullum is the one I respect most in this forum. I mean it! I posted the previous message because I do have that kind of feeling. I still respect Mr, Gullum for his contribution and talent. But please, please try to think of it that if you were the one who got nothing after posting many times with solid suggestion? It doesn't mean anything right or wrong if I have some kind of feeling, and it goes without saying that my feeling doesn't prove anything wrong or right. Thanks for your reasoning again, anyway. You are the one who want deadly to make this forum better, SO DO I^^.
Hopefully the topic stops here. All I wanted to say was merely MY VERY PERSONAL FEELING. If it hurts, I apologize^^.
Mr. Gullum,
From my 1st glance, the rom is fast. No battery drain and memory drain (I've flashed the 8M version) problems are found. As for BT, I don't know why. After I paired the BT with my iTech S38 up, there is not a stereo headset sign / logo on the top bar of the screen. And all the sounds are still coming out from the speaker of the phone itself. This is why I cannot test the sound quality of the BT Stereo yet. As you said, you have included the A2DP driver of Fantastic B4. That is why I am so excited to see your V5 rom and flashed it immediately.
Could you tell me how to activate the BT Stereo headset so that I could check and report the sound quality to you?
Thanks and regards,
HTC PhonePad
I am having problems configuringt the Phone Pad. It worked perfectly in the V5 beta with the cab-file installed, but with this ROM the Option button does not work. Gullum, do you have any idea how to solve this?
perfect rom
-no battery drain issue
-I am not taking a lot of photos with my prophet, so I am happy with the old camera driver
-4MB page pool version is fast enough for me, I prefer ram rather than several seconds of speed
-single instance of windows live messenger (in contrary to pdaviet 4.0.0.6, which runs another messenger instance even if you are already signed in. I had to write a simple program and pointed wlmmessenger.lnk to my wlmloader.exe to have only one instance)
-I liked the keyboard in this rom more because the keys are bigger. however, I don't know if it was also available in pdaviet)
-I have reset the device several times and no losing of anything for now
-the device doesn't lock up during boot while it is connected via usb cable.
I installed wm6 because I needed more program memory and .net cf v2.0 is already installed, not taking any more space in program memory. I read a lot of threads and disappointed with wm6 issues. But it seems that this version has no problems for now. I have overclocked the device to 247MHz (I had problems with higher clocks before)
really good work gullum. thank you very much.
Streaming media app
Another question. How do I get the Streaming media app to play .3gp streams. When I click a link it just opens WMP and I get an error message. I have gotten this to work earlier, but I just can´t remember what I did then.
Any help is apriciated.
password for pdaviet in step 1
hi guys,
i am new in this forum but my first impression is great.
i want to flash my prophet with the prophettouch v5 version from gullum. in step 1 you write i have to install any of the 3 other roms first. so i downloaded "pdaviet step 1" but the rar-file is locked by a password i don't know.
can anyone help me please ....
thanks a lot,
andrbe
andrbe said:
hi guys,
i am new in this forum but my first impression is great.
i want to flash my prophet with the prophettouch v5 version from gullum. in step 1 you write i have to install any of the 3 other roms first. so i downloaded "pdaviet step 1" but the rar-file is locked by a password i don't know.
can anyone help me please ....
thanks a lot,
andrbe
Click to expand...
Click to collapse
Hi and good morning I'll start with you and work my way back.
The password is PDAVIET for that step 1.
emmeborn said:
I am having problems configuringt the Phone Pad. It worked perfectly in the V5 beta with the cab-file installed, but with this ROM the Option button does not work. Gullum, do you have any idea how to solve this?
Click to expand...
Click to collapse
If you are talking about T9 landgauges then it's because I removed all but English. And streaming 3g I have never tried myself so maybe someone that has tryed it.
.NET CF 3.5 is required.
UPDATE (3/29/10): Version 0.10 Released - See Post 77 for Change Log.
UPDATE (3/11/10): Version 0.9 Released - See Post 67 for Change Log.
UPDATE (3/8/10): Version 0.8 Released - See Post 63 for Change Log
UPDATE (3/3/10): Version 0.7 Released - Only changes are some registry settings that I missed earlier. With this, both Caller ID Announcements and Voice Dialing should work with this installer.
UPDATE (3/3/10): Version 0.5 Released - See Post 55 for Change Log - Device List below updated ... Updated v0.6 with auto start on device boot attached ... If you are using v0.5 (or v0.5_autostart which I screwed up ... sorry), uninstall it and install the v0.6.
Device List (Updated 3/8/10)
Known Working Devices
HTC Titan
HTC RhodiumW (Touch Pro 2)
HTC Rhodium (Tilt 2)
NOT Known Working Devices - If anyone uses a device listed here and my app, please let me know if it works.
HTC HD2 - I think this is similar to the TP2 - Should work, but I need someone to confirm this
Sony Ericsson XPERIA X1 - I have no idea ... Does this device use the WIDCOMM Bluetooth stack? Can someone test the latest app?
If you install this app, and have problems, uninstall msvcFix and install "revert_msvcFix.cab"
UPDATE (8/11/09): I have fixed the native app (now referred to as v0.3) and attached. I will leave the v0.1 attached as well.
UPDATE (8/10/09): Sorry, but there is something wrong in the native v0.2 ... I have posted the orig v0.1 in the mean time.
Not sure what devices this effects/fixes, but on my Titan, Voice Command incoming caller ID announcements don't work correctly. The work-around I use is ...
To enable caller ID announcements:
Set HKCU\ControlPanel\Sounds\TTSAnnounce\Category to "Ring"
Set HKCU\ControlPanel\Sounds\RingTone0\Category to "_Ring"
Set HKCU\ControlPanel\SoundsCategories\Ring\initVol to 15
To disable caller ID announcements:
Set HKCU\ControlPanel\Sounds\TTSAnnounce\Category to "_Ring"
Set HKCU\ControlPanel\Sounds\RingTone0\Category to "Ring"
Set HKCU\ControlPanel\SoundsCategories\Ring\initVol to 5
I have written a program to address these "fixes". My program checks the MSVC "Announce incoming caller ID" option, and checks to see if bluetooth is paired and headset service is active. If all these checks pass, I set the "enable" registry settings ... If not, set the "disable" registry settings.
Currently, the default interval is 5 seconds. I intend to make the interval a setting in the registry in the next version. Attached is a CAB install for version 0.3. The CAB will install the EXE to \Program Files\dj13241\ and create a shortcut in \Windows\Startup\ (it will auto-run on device boot). Version 0.1 was written in VB .Net, and took up to ~1.5 MB after running for some time. This version (v0.3) was written entirely in native C and compiled with cegcc-mingw32ce-gcc on Linux, and takes up 32 KB! Quite a memory improvement!
Feedback anyone?
Anyone have any feedback on this? Should I spend the time to improve it? Any feature requests? Anything?
Tilt2
Tried it on Tilt 2 and does not work. Caller ID still gets announced thru handset speaker
I am interested in your success...
186227 said:
Tried it on Tilt 2 and does not work. Caller ID still gets announced thru handset speaker
Click to expand...
Click to collapse
I think I know what the problem is ... I don't have my earpiece with me to test it though. Are you comfortable using a registry editor? If so, please post the values for the following keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule" =
"Capability" =
Also, please look in your \Windows\ directory for a file called "vcbthag.dll" ... You will have to check off 'Menu->Show all files' in order to see dll files.
Thank you for the constructive feedback!
howdykeith said:
I am interested in your success...
Click to expand...
Click to collapse
Good to know that someone is!
Do you use this on your phone?
I too, am interested in your success.
dj13241 said:
If so, please post the values for the following keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule" =
"Capability" =
Click to expand...
Click to collapse
Here are the values requested:
"BTAGExtModule" = BTRilProxyOEM.dll
"Capability" = 0x65 (101)
I am VERY interested in getting incoming caller ID to announce over BT on my Tilt 2. If you get this, you are officially the ruler of the universe!!!
I'm interested, will give it a try on my HD2
Hi and thanks for all the great info.Please forgive me (newby) to winmo,i installed ms voice commander and installe the Voice Command Announcement Fix and it still wont announnce the caller calling.Has anyone got any insight to the problem.
Thankyou
Sorry, not working on HD2 either
pity.. does not work on xperia x1 either..
I'm on it ...
I have a Touch Pro 2 and with some registry mods (quite a hack job at this point), I got it to the point of announcing Caller ID without playing a ringtone, but it announced from the phone's external speaker and my earpiece played its internal ringer. It looks to me like a timing issue ... VC creates a file \Application Data\Volitle\TTSCallerID.wav which is the caller ID announcement ... I think that the delay involved with creating that file is causing the issue, and by the time the file is created, my earpiece is already ringing with its ringtone.
On another note, my original program is (apparently) dependent on a different Bluetooth stack that the TP2 (which uses the wildcomm stack) ... If anyone knows how to check for a BT headset via native API, I would love to know!
I will be editing the first post when I have some time later tonight ... I will add "known working" and "known not working" phone lists ... Looks like the "not working" list will be longer for now
Thanks for all the feedback so far.
The Tilt 2 also uses the Widcomm BT stack. We've been blaming everything on the Widcomm stack, but I've begun to suspect that the aging MSVC software is really more to blame as it doesn't know how to play nice with newer software. Of course, I remember all of us soundly denouncing MSVC a few years ago about not being very compatible with the MS BT stack either!
I think you are definitely on to something. Yes, the hacks you have may be a bit kludgy but accurate. A suggestion: forget the checks to see if BT enable or not for the time being; leave BT enabled and do all reg changes, etc with the assumption that BT is enabled and connected. Forgive me if that sounds condescending -- I lost all my programming skills about the time Turbo Pascal died, if anyone here even remembers that from the early 80s -- but sometimes an outside view can make a small difference.
Always willing to try any hacks you suggest to see how they work on my stock Tilt 2; feel free to PM fi there's anything I can do to help.
Hi,
I have a TP2 with Stock ROM and have no problems with announcing phone calls, but..
You may already know about the bug when an "unknown caller" calls. VC does three things choosing randomly:
- 1. Does not announce anything, phone does not ring
- 2. does not anonunce anything, phone rings for a sec.
- 3. does announce the LAST CALLER - and this is really annoying, when you think you have a call from a friend or something, and it turns out VC just scammed you badly.
So my question is can you fix at least the 3rd behavior?
mydexterid said:
Hi,
I have a TP2 with Stock ROM and have no problems with announcing phone calls, but..
QUOTE]
So your TP2 announces your incoming caller ID over your BT headset? Really?
Click to expand...
Click to collapse
jlmwrite said:
mydexterid said:
Hi,
I have a TP2 with Stock ROM and have no problems with announcing phone calls, but..
QUOTE]
So your TP2 announces your incoming caller ID over your BT headset? Really?
Click to expand...
Click to collapse
I have a wired headset.
Is this thread only about the BT headset bug? Then the title should be modified. It is not really clear from the title/1st post that what announcement fix is this.
Click to expand...
Click to collapse
mydexterid said:
I have a wired headset.
Is this thread only about the BT headset bug? Then the title should be modified. It is not really clear from the title/1st post that what announcement fix is this.
Click to expand...
Click to collapse
Its good to know this info though ... Do you have a BT headset you could try it with? Has anyone else tried with a stock ROM, or is everyone using custom ROMs?
I'm going to dump the stock ROM registry and compare it to what I am running (which is a ROM built from Calkulin's 1.5 Beta Kitchen with a few of my own MODs).
Nope. The device itself gives me enough radiation I don't need more from a bluetooth device
dj13241 said:
Its good to know this info though ... Do you have a BT headset you could try it with? Has anyone else tried with a stock ROM, or is everyone using custom ROMs?
I'm going to dump the stock ROM registry and compare it to what I am running (which is a ROM built from Calkulin's 1.5 Beta Kitchen with a few of my own MODs).
Click to expand...
Click to collapse
For inspiration on MSVC you could also read my thread
Ok, sorry to made everybody wait... now here's what I've had after my sleepless night.
HP iPAQ rw6828 WM6.5.5 Build 23529 AND-2 CLEAN
This ROM is fast and stable. I've tried to include M2D 2.0 in the ROM, the build still works great. Quite 'snappy' for me...
I will always made ROM with large Device Storage. Because this will increase our devices' speed and stability.
After the firstboot you'll have about 56 MB of Storage Memory and and at least 25MB of Device Memory. You'll know it when you try it...
I added almost all item from the original 23529 Build... but due to limited storage I removed some packages.
Removed:
- Microsoft MyPhone Console
- MMS
- Remote Desktop
- VOiP
- Welcome Center
Added:
- Registry tweaks for ClearType mode
- FdcSoft Task Manager - (forgot to remove... very useful for tweaking)
Known bugs...
1. Obex driver - unable to send file from the File Explorer
Solution just install 3rd party file management software. try, Resco Explorer, and you'll be able to send to other devices.
2. ddcam.exe - The image were mirrored.
This is the ddcam, not the main camera. The maincamera works very good.
3. If you open Pictures & Videos (pimg.exe), in the folder "\My Documents\My Pictures" you can see a camera icon. Normally, you can use the icon as a shortcut to the device's camera, but it seems not working here.
Quick upgrading guide.
1. Download the ROM file to your computer, and then extract diskimg.nb0 from the RAR file.
2. Copy diskimg.nb0 to miniSD (not larger than 1GB)
3. MAKE SURE YOUR DEVICE HAD ENOUGH BATTERY. If you feel hesitant, just do all the next steps with the battery charger plugged in to your device.
4. Insert the miniSD to you device. And TURN ON YOUR DEVICE.
5. While the device is on, do this step. PRESS AND HOLD BOTH SOFTKEYS (button with (-) symbol, placed above the green/call key and red/end call key), and HIT THE RESET BUTTON with Stylus WHILE STILL HOLDING BOTH SOFTKEYS.
6. The next screen will be white, with HP logo at the center of your screen. The upgrade process has started. Wait about 12 (about 8 minutes for flash upgrade and 4 minutes for Cold Boot).
7. At the 8th minutes your device will be rebooted automatically. Wait again for 4 minutes for Cold Boot.
8. Align Screen, set the time, date, and localization... and finished.
9. Reset your device at least once.
And here's the ROM File...
http://www.mediafire.com/?kwzfwguizzo
I hope this ROM would be useful for you all....
Very big thanks to my sister Adinda, Ardhya, Da_G, helloworld1, and many others...
waiting for new ROM...
Cool !
for this reason i am proud to be Indonesian !
keep good work man !
Please wait a while. I'm working on the Buetooth and camera drivers right now
Update 27 Feb 2010 14:10
Bluetooth seems to work, the drivers are now running. But I haven't tried it yet. I have no other device to pair with...
Camera also working. But I use HP Photosmart, not Brogent... I'll do some other tests, first... then I'll upload it. Yea yea, I can't wait for it either....
It's 99,9% done
I'm a little confuse of which Microsoft application to add. The iPAQ 6828 storage is not that large... Any input...
We have, Office Mobile 2010 (Excel, Word, PowerPoint, OneNote, SharePoint WorkSpace), MS Tag, Auto Data Config, the Widgets (money, weather, search widget).... etc.
Please help me to consider of which the one all 6828 friend will use the most....
Greetings...
Andy
Bluetooth works. Succesfully paired to a Chinese phone.
Wifi just perfect. In fact, I posted this from my devece's Pocket IE. Connected to the Internet thru Magic's wifi tether.
GPRS etc, tested, OK.
I wanna test the Infra Red first, then change HP OEM icons.
Update 28 Feb 2010 17:10
I've tested the bluetooth, it works ok for pairing. But still unable to send files. But I've other way to solve it. Just install 3rd party explorer such as Resco File Explorer, it will renew the OBEX driver. And You will be able to send files thru bluetooth.
Camera done, I'm using HP Photosmart Software. Previously the camera worked fine, but when I tried to capture video, the video was unsupported by the Win Media Player. I have also fixed this problem.
The ddcam capture were mirrored. I don't know how to solve this one...
Other software work flawlessly.
I'm doing my best... please be patient...
Nice to try right now
so no MMS support in this rom ?
Yes brother... I didn't add it.
do You Use MMS?? I can add it it if you want to
You can also install them separately. Try to search for ArcSoftMMS in this forum.
AndyAdinda said:
Yes brother... I didn't add it.
do You Use MMS?? I can add it it if you want to
You can also install them separately. Try to search for ArcSoftMMS in this forum.
Click to expand...
Click to collapse
Yes, I use MMS from time to time
That's what I did install it from cab..
Rom is working perfect so far, only bug I found is in my rw6815 menu Wireless LAN doesn't work from Settings menu in Comm Manager.
P.S. I think you can remove Microsoft Tag Reader and MSN Money instead of MMS since I don't think as many people used them as MMS function.
On my HP 6828 doesnt vibrate
Does it works on Ipaq RW6815
Been using this ROM.. just 1 thing, why does my wi-fi doesnt turn on??
rj_cool81 said:
Been using this ROM.. just 1 thing, why does my wi-fi doesnt turn on??
Click to expand...
Click to collapse
Vibration works.
Wifi... actually I posted some message in this thread thru the device's wifi...
Ok, I'll check it after Tuesday. I'll have an interview for job on Tuesday Noon
Also I'll add MMS and remove some un-nacessary items.
got the vibrate to work, hardware issue.
AndyAdinda said:
Vibration works.
Wifi... actually I posted some message in this thread thru the device's wifi...
Ok, I'll check it after Tuesday. I'll have an interview for job on Tuesday Noon
Also I'll add MMS and remove some un-nacessary items.
Click to expand...
Click to collapse
Wish you luck with this job interview.
gileas said:
Does it works on Ipaq RW6815
Click to expand...
Click to collapse
what is you question ? if rom is working on ipaq rw6815 or vibration is working on ipaq with this rom..
Both are working fine except few small bugs..
My Wifi is also not working in 6815.
MitchoKlem said:
My Wifi is also not working in 6815.
Click to expand...
Click to collapse
my wifi on my rw6815 is working OK, but in order to find new wifi connections you must go to settings -> connections menu instead of using menu from communication manager.