don't work videcall - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hello all people, I'am spanish and my english is very bad.SORRY
I have a WM6 XDA 0.20.1 and radio 1.40.30.0 andd spl 1.40Oli.
I work very good my bb conect modify by XDA... Thanks a lot.I need this for work every day.
But I have a big problem with the videocall, my Tytn is bloked when i call with video, and make very cut. I install all cab's by XDA, but dont work fine????
It's posible good work the videocall in this WM6 XDA?????
Thanks and sorry for my english.

Good evening
Try WM6 Black 2.0, video call works very well.

Thanks mrvanx
But with this version of wm6 work my blackberry conect, and where download bb work with this version of wm6.
I have wm6 XDA 0.20.1 because work with bb.

bb connect will work with Black 2.0 as the build number is editted to 5.1.195.
Try Black 2.0

thanks now install this version.

thanks mrvarx:
Yesterday I install black 2.0 and work very good, at the videcall is good...
The bb Connect work very fine.
I like to much the parrot ck3100 because now I see in my display parrot the batery and line.
See you...

Video call feedback image is black
mrvanx said:
bb connect will work with Black 2.0 as the build number is editted to 5.1.195.
Try Black 2.0
Click to expand...
Click to collapse
Hi,
My post may be related to WM6 upgrading, but ...
I'm running the 20070326 - LVSW Ed.
When I place a Video call (3G / plan allows it) :
- I receive the image from the other 3G phone,
- But the Hermes internal camera sends a black image (no image ?) to my Hermes screen (my video small) and to the 3G phone I called.
- Same problem for incoming and outgoing video calls.
I applied the relevant reg tweaks (htcTweakUI, fit4cat Hermes, ...) and patches.
I've been having this problem since I flashed my Hermes for a WM6 ROM.
It was working with WM5 (but don't want to go back...).
BTW : a hard reset didn't fix the problem.
Thanks.

frav said:
Hi,
My post may be related to WM6 upgrading, but ...
I'm running the 20070326 - LVSW Ed.
When I place a Video call (3G / plan allows it) :
- I receive the image from the other 3G phone,
- But the Hermes internal camera sends a black image (no image ?) to my Hermes screen (my video small) and to the 3G phone I called.
- Same problem for incoming and outgoing video calls.
I applied the relevant reg tweaks (htcTweakUI, fit4cat Hermes, ...) and patches.
I've been having this problem since I flashed my Hermes for a WM6 ROM.
It was working with WM5 (but don't want to go back...).
BTW : a hard reset didn't fix the problem.
Thanks.
Click to expand...
Click to collapse
The black 2.0 wm6 have a littel options on back the screen when you speak in videocall, and you need press this options because one option don't see another is for the back camera another option is for front camera etc... you see this options....

Related

Upgraded 1.72 ROM and happy Bluetoothing GPS with TomTom3

Because of all the expected mssing around with my original T-Mobile 1.60.00 ROM combined with a Bluetooth GPS, I decided to upgrade. It all works now, just let me share my findings with you:
I wanted the 1.72WWE and 1.14 Radio ROM, no Beta, but also wanted to keep my Dutch T-Mobile custumisations.
I took the recently released QTek 1.72 ROM
Unpacked it
Threw the extende rom file away
Changed the 'country code' from qtek to tmobile (see link on xda-developers mainpage)
Backed up my device using Activesync backup
Started the upgrade
UhOh: 'USB 1.03' on screen and nothing happening
Restarted upgrade
Went smooth all along
Hard reset: YES!! 1.72.00WWE / 1.14.00 radio with all my beloved Dutch T-Mobile customisations (ext rom 1.60.38)
Performed restore. THIS probably wasnt the smartest idea, because right after that my device was quite unstable. '
So: Did a 'permanent save' backup
and a Hard reset again.
Rock steady since then!
To get Bluetooth & BT GPS working frightened me a bit: getting that to work should be proof of the pudding to justify my upgrade.
Fiddled around 2 hours (com ports, gps viewer software that accompanied the GPS and what have you got . . .), until I tried the simple stupid method:
Switch on Bluetooth
Bond the BPS
Start TomTom GPS
Select NMEA 0183v2 9600 and Bluetooth GPS
I am very happy!!
For those that are still lokking for a decent cheap BT GPS: Search on ebay for DCONNEX. They sell for around 80 euros + 28 euros shipping. The DCONNEX DC-230 is in fact a rebadged Holux GR-230. Works like a charm, and for the price of a wire solution!
Works!!!!!
even imat v1.72 works great with BT GPS with no added BT tools
gazzaman2k said:
even imat v1.72 works great with BT GPS with no added BT tools
Click to expand...
Click to collapse
Is the same ROM.
Eelco is right
As long as you look just at the os & radio roms both QTek 1.72 and IMate 1.72 are the same.
Difference is withing the extended rom.
because I liked to keep the Duthc T-Mobile customisations (well not all, but most of them) I re-used my old extended rom.
Hello,
Help with 1.72 ROM set up.
I'm very excited about how you have set up your device, but I'm not fully certain how to do the same.
I have looked for the ROM unpacker, but the only thing I see on this site is the ER-Edit.
I currently have the T-Mobile UK Beta 1.72 on my device, and I'm not real happy with it.
If you can and if it is not too much trouble, could you please provide me a little more specific directions on how you accomplished your set up. I'm in the USA, and I upgraded from 1.60.36, which I was not very happy with either. I liked 1.60 better.
My major concerns lie with the country id error, and using parts of different extended roms and radio stacks, but I'm willing to try.
Thank You, Ed
Well since you now have 1.72 on the device its really quite simple.
(You might as well consider upgrading to the non-beta 1.72 from imate or Qtek, i used Qtek)
Foor the external rom customisations:
Unpack an update (like the 1.60 you mentioned) using winrar
Using the directions on thsi site determine your current çountry id FOR THE EXTENDED ROM
using the directions on this site (xda2nbf) change the country id for the extende rom file (ms_.nbf)
remove the other .nbf (nb and radio) files
Upgrade your device
Cold reset
Yopur device should now be a bit in the right direction
Install the extende rom-unlocker found in this forum
unhide & unlock the extended rom
Now you can add/remove programs from the extended rom.
adding goes like:
1. place .cab file of program to be installed in extended rom
2. add CAB line in config.txt just before the current last line
removing goes like:
1. remove cab file of program you dont like
2. remove accompanying line in config.txt
Dont forget to lock you extended rom afterwards so the contents is kept during any reset.
hope this helps.
also : search the forum on the topics extended rom unlock
edsub,
Thank you very much. Your response is very helpful, and sends me in the right direction. The winrar was the missing peice that I did not have.
I'm familiar with the extended rom part, but I have not played around with the .nbf, nor the rom locking.
The UK beta 1.72 I have does not seem real stable to me. I'm thinking of going with the iMate or Qtek 1.72, as you suggest.
Thanks again I'll see what I can manage.
Ed
hey all, im on o2 in uk, my current settings are :-
Rom version :- 1.60.00WWE
Rom date :- 12/03/03
Radio version :- 1.10.00
Protocol version :- 1337.18
ExtRom version :- 1.60.50
i knw this mite sound abit basic...but what difference would it make in me updating to this 1.72 rom ?
is there any point ?
edsub said:
i used Qtek
Click to expand...
Click to collapse
Maybe off topic but where did you get the QTEK ROM from?
Can you share the URL.
Thanks,
Mark
Hi all,
I've recently bought a DC-230 GPS BT, but I cannot use with TomTom3
I have:
ROM VER 1.72.00WWE
Radio 1.14.00
Ext 1.72.104 (with some cabs added by me)
And a XDA 2 (rom is a Qtek 2020)
I've tried:
Hard reset - no BT Tools - Bond GPS - Success with GPS Viewer (that is in boundle with DC) on COM5 9600
Started tomtomGPS, no success (with or without START GPS with GPS Viewer).
I've tried
- NMEA 0183v2 9600 on COM5 and on Bluetooth
- NMEA 0183v2 Bluetooth on COM5 and on Bluetooth
- SiRF 9600 on COM5 and on Bluetooth
- SiRF Bluetooth on COM5 and on Bluetooth
I've removed bond with GPS.
So i've installed BT Tools 1.1. Bondend and added profile on COM7
GPS View didn't see the GPS
TomTom the same (i've tried the same drivers)
Any suggestion?
Thanks
Fabio
try changing to nmea 4800 on the same port that the gps view is showing, make sure gps view is closed when starting tomtom. Alsi instead of choosing from the upper drop down box in tomtom, look in the lower drop down, you may find your gps is announced/listed there.
cruisin-thru said:
try changing to nmea 4800 on the same port that the gps view is showing, make sure gps view is closed when starting tomtom. Alsi instead of choosing from the upper drop down box in tomtom, look in the lower drop down, you may find your gps is announced/listed there.
Click to expand...
Click to collapse
no success
I don't know why doesn't work
GPS View found my GPS... TomTom GPS no
Is the right version of TomTom GPS? (down right i see V2.09 305/393)
In the lower drop down box I see only com/irda/bt ports...
Thanks
You should have totmtomgps V3.02. It is available on their site.
Downloaded TomTom GPS 3.02...no success
But is correct that GPS Viewer when i push on Start GPS show
Date: 2002/11/10
Time 01:01:xx
Long:
E: 0'0'0.0''
Lat
N: 0'0'0.0''
Dop: 50.0
Aciring: no fix
Direction NE 0
Alt 0m
Speed 0km/h
PDop50.0
And i get a red point on the N on the map...
news...
With BT Tools installed i've tried GPSDash and MapSonic...
They connect to com7, but I get Satellites in use: 0 of 1 sats
Quality of Fix: no fix / n.a.
What's meaning?
Thanks again
I cannot use any sats..whats wrong ? is the gps broken ?
Aehm....uhm...
Er...is possible that it is low of battery? I put on charge and now I see 7 sats..
Bluetooth authomatic activation problem
I am sorry to jump in this discussion, but I had a BT problem, I couldn't connect to a GPS (Leadtek), and I did almost the same thing you are talking: I upgraded my QTEK2020 to 1.72.00WWE/1.14.00/1.72.602.
After the upgrade I installed the Pocket Bluetooth Tools and after some bondings/"unbonding", the COM7 profile appeared and everything worked fine from that moment on.
Now, there are 2 things I want to share:
- first, in order to have a diferent Bluetooth serial connection to the same or another port, I had to kill the the bond I created with the Leadtek GPS, then bonded again without activating the serial profile and then killed that bond again. Only after this series of actions, with a soft reset between all of them, I was able to bond with a diferent GPS bluetooth (I think it was from Globalsat), using the Com7 serial profile.
- second: my Qtek activates randomly the bluetooth by itself...
Does anyone know how to solve the authomatic random activation of the GT?
Try to activate in start/settings/system/bluetooth settings the extended port com 5. This helps with leadtek and emtac bluetooth antenna's for tomtom, and alturion.
Cheers
Why are you using Pocket Bluetools with rom 1.72??
NO NEED TO!!
Just use native MS BT Stack.
Bond the BT GPS, say yes when asked to assign COM port.
Let GPS software use COM5
Settings for TomTom3: NMEA Bluetooth GPS / COM5
Works flawlessly

Feedback for the new O2 UK 1.72 ROM Upgrade.

I have created this topic to try and get all feedback specific to this upgrade into one place.
So if you have comments, issues, problems, opinions or just plain questions about this upgrade, post them here.
great job dcs.
let me be the first to post and it's regarding Incoming MSG.
When i first got my unit from Philippines, it was loaded with 1.66WWE and with this version i was able to select preloaded or customized WAV as incoming SMS tone. But it went missing when i upgraded to Waxx's 1.72 and even now to the latest o2 UK 1.72. Anyone else experiencing this?
lazzy said:
great job dcs.
let me be the first to post and it's regarding Incoming MSG.
When i first got my unit from Philippines, it was loaded with 1.66WWE and with this version i was able to select preloaded or customized WAV as incoming SMS tone. But it went missing when i upgraded to Waxx's 1.72 and even now to the latest o2 UK 1.72. Anyone else experiencing this?
Click to expand...
Click to collapse
I am able to do this. From the Phone app. Use Tool/Options/Phone and tap Other Settings button. then use the Notifications tab.
Latest ROM upgrade??
I have read the o2 blurb, but can other o2 uk user tell me, what do I really get from this upgrade that makes it worth all the hassle of resetting my device and re-installing all of the hardware please?
Many Thanks
Pete
NB post here or as a private message thx
dcs,
finally after flashing it again this time with
ROM 1.72
Radio 1.17
ExtRom 1.17.181 (modified by ZeroXtreme for Asia) http://forum.xda-developers.com/viewtopic.php?t=12547
i am able to select WAV as incoming msg tone. not too sure what happened.
Re: Latest ROM upgrade??
peterbutler19 said:
I have read the o2 blurb, but can other o2 uk user tell me, what do I really get from this upgrade that makes it worth all the hassle of resetting my device and re-installing all of the hardware please?
Many Thanks
Pete
NB post here or as a private message thx
Click to expand...
Click to collapse
Personally, I find the performance to be improved and also stability. Also, when a call comes in, the Answer button on the dialog works, which didn't before. As part of the extended ROM, O2 have provided improved video streaming over GPRS plus video for MMS (I haven't used either yet). The OS itself has the Microsoft user update 2 included. Of course, the 181 release also has Blackberry included.
lazzy said:
dcs,
finally after flashing it again this time with
ROM 1.72
Radio 1.17
ExtRom 1.17.181 (modified by ZeroXtreme for Asia) http://forum.xda-developers.com/viewtopic.php?t=12547
i am able to select WAV as incoming msg tone. not too sure what happened.
Click to expand...
Click to collapse
OK. Strange, but at least you are sorted
Edit: Maybe it is something in O2 Active that causes the problem? I have uninstalled it, so perhaps I am unaffected. Could other people with O2 Active still installed throw light on this?
msn
Hi, I have installed the new rom (1.72.187). Everything is ok but Messenger. I can surf web sites using gprs and wifi but i cant connect msn. I always get the same error. "Logon to MSN Messenger failed because the service temporarily unavailable." But i can connect with my laptop. Any idea? thanks....
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Re: msn
dherrero said:
Hi, I have installed the new rom (1.72.187). Everything is ok but Messenger. I can surf web sites using gprs and wifi but i cant connect msn. I always get the same error. "Logon to MSN Messenger failed because the service temporarily unavailable." But i can connect with my laptop. Any idea? thanks....
Click to expand...
Click to collapse
Have you applied the latest patch from Microsoft? Take a look here: http://www.microsoft.com/windowsmobile/downloads/msnmessenger/pocketpc.mspx
It does state that you cannot access the service unless it is applied. Quote: "Customers without the updated software will not have access to the Service until the download has been completed."
lazzy said:
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
No, sorry. I have never used it.
Anyone else used it?
Battary Pack
Dear
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
I also have identical experience using the Battery Pack Pro v1.1.10 on 1.60 WWE. Being scared to have a try on 1.72. Should anyone pioneer on this, please also let me know. Thanks
Blackberry?
I'm trying to understand what the benefits of having Blackberry are. The Blackberry website says you get all the stuff which I'm sure I already have with my XDA. Things like e-mail and IE. Except for my e-mail which is blocked by my ISP, Plus.net (I can only view/download e-mails, not send new ones).
What's the big improvement I'm supposed to get with Blackberry? :?
lazzy said:
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
I am running v1.1.1 with no problems on the v1.72 Rom. Worked fine with 1.60 also but no experience of v1.66.
have already installed New ROM 1.72.187
in this ROM, i think it work faster than 1.60 but liked other 1.72 ROM from T-mobile.
In the Ext ROM ,it doesn't include some software such as GPRS monitor.
Now ,I desired to cook it.
More stable without question. Only thing that I have found is that the O2 logo can't be moved. Dam thing stuck in middle of title bar. BT Tools works ok. Better wapsupport for o2 active, though XDA seems to forget it's connected and will drop connection and reconnect when conecting to O2's wap service.
Still it's a worthwile update.
I am having problems with Fonix voice dial. When I adda voice tag I get an error that it cannot update, hard or soft reset doesnt help. Also if I restore my backup using the built in backup program I find that streaming video and blackberry programs both vanish from my xda 2.
Feed back
looking good so far. I have added all my apps including BPP 1.1.1 and everything works fine.
SRS now works as well whereas before it trashed my xda II
I am from Asia but installed this UK o2 ROM and found its totally working good.
However, one thing is the autoconfig function has gone.
Anyone knows how to get this from the previous AISA rom?
Blackberry Config
Anyone been successful with this yet?
Ive activated the install and the BB client tries to connect somewhere over GPRS, but eventually suspends itself.
Ive got access to our Corporate BES so should be able to get it working. However, there seems to be some mention in the ROM upgrade guide about a desktop client manager (needed on PC to download the policy).
Ive seen posts that say O2 is not making it availble until Jan 05 - anyone confirm?
Oh, and Im actually using Vodafone

Applications conflicting with WM2003SE 2.06-mystery man

Hi everyone,
I would like to kick start a thread for any application installed in the latest SE rom by mystery man. The rom seem stable nevertheless some apps seem do not really prepared for the changes. (i mean from WM2003 to WM2003SE). Let begins........
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Will continue to report.......
Best Rgds... :lol:
Wisbar advance freezes and requires soft reset after telephone has been used/or whilst attempting to dial.
XCPU Skalar - you have to update to version 3.85, lower version keeps system to hang
Tillanosoft Pockettweak - update to 4.2.7, lower version destroys font settings
PocketZenPhone - update to latest beta 11 version, older versions are not able to switch phone on again
Can someone tell me what is the function of "Today timeout" which constantly showed 4hrs at Start-Setings-Today?
Well why must that function included in the today settings? The problem is now and then my today screen showed nothing or clean even though i unchecked the Today timeout box to disable it.
After all i suspect something is not right wif the Today timeout option and nothing to do wif Battery Pack.
Anyone experience the above problem? :roll:
Calligrapher 7.4 (just only 7.4 ,older not has this problem)
after i install and use for 15 sec. ,then screen is locked up cannot tap anymore but Button still work.
I do soft reset and disable it then 15 sec ,screen lock again.
Only one way to solve it by using cradle sync with desktop and select remove calligrapher and then soft reset ,it will work normally again.
It may from defect in version 7.4 or conflict with XDA II.
PLease take care ,if you decide to use this version
Problems with SE (both dcs's & mysteryman)
Hey there guys!
I used this weekend (in fact starting friday evening) to upgrade my T-Mobile MDA2 from ROM 1.72 (radio 1.14) to ROM 2.xx and radio 1.18.
Although I did a lot of reflashing up to now - I want to thank you all guys for this forum, because everything I've learnt about my PPC is from here. It is shame that I cannot contribute via paypal because Bulgaria is not included in their country list.
Now.. Here is what I've experienced with my mda:
I upgraded from 1.72 T-Mobile WWE to 2.02ti... All cool - until I started to load the device with programs. I mean - it is cool and fast and nice and colorful..
A guy mentioned that SE boots faster - I can's say that - the phone would show the first boot picture, then fast will change to 2nd and then (in 2 to 5 seconds) the bluetooth led will flash (if at all) at least 5 times and then it shows the today screen or will stay there forever :-(
I understood that:
* xscallar 2.8x would not work - it freezes the system;
* sbp pocketplus 2.1 would hang the system or/and the today screen;
* sprite backup 3.0 hard-resets the system (3 in 2 times after finishing scheduled/normal backup);
* gprs monitor 2.12 would hang the today screen;
* cleartype is a way worse than in 1.60wwe
* if the system works, compared to 1.72 - it is flying! but :-(....
These problems appeared both in 2.02ti and in 2.06, no matter what extended rom I install (if I install any at all - because thru tears I tried that one too ;-) )
The (X) sign for closing programs disappears constantly and some programs could not be closed or [ok]'d :-(
Bluetooth 1.5x would either not work properly or would not work at all.
about the extended rom - i noticed this:
MMS15024_WWE_Hima_OzUp.sa.CAB, despite the lower version compared to MMS2.0.0.13 incorporates in the outlook folder and doesn't take additional space in the today screen. Also it provides sending restrictions as 100K, 200K, MAX - ;-) which is kewl 'cause I missed the ability of my SonyEricsson P900 to send unlimited in size MMS messages.
CallerIDB10, provided with 2.x SE versions cuts about 4 pixels from the bottom of the CLIP pictures and I don't like it - it has no new features or anything
For conclusion:
I liked the look of SE versions - it is really neat and fast - when it works.
But non of my really needed sofware would work as expected.
I went back to T-Mobile 1.72 (edsub's version) and I will tell you guys - there is nothing as stable and fast as it is.
This is my first post here, and I read this forum for more than 8 months. You guys rock!
Yours,
Dean
gerald8297 said:
Hi everyone,
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Best Rgds... :lol:
Click to expand...
Click to collapse
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
After that I switched to 2.02 and all I can say its the most stable ROM
I know from 1.60 .
The reason I am posting here is :
NO PROBLEM WITH Battery Pack Pro v1.11 on the ROM 2.02.t1WWE .
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second boot .
Click to expand...
Click to collapse
I've notices that 2.06 sometimes freeses during boot when SD-card is inserted. It boots normally when SD-card is out and inserted when device finishes booting.
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Probably
Probably , probably , probably
Spb PocletPlus 2.1 is stable in my 2.06SE. The problem i encountered is the unstable widcomm bluetooth stack ( 1.5.0.801 ) which always "could not correctly initialized - BTTrayCE.exe) . can some one post some registry tweak for this?
@ mamaich
can you post the MS cleartype tuning tool please? thanks! :lol:
Phone Profiles is another one....
Using Phone Profiles 7.5 or 8.0, there is a dialog on reboot, 'Can't Find Window", (something like that), and it will not continue booting, only solution is a hard reset...
I can confirm the Calligrapher 7.4... will lock during boot, hard reset
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Pls do so. Many are anticipating.
Thanks for the good work!!!
:lol:
Here is Microsoft Cleartype Tuner.
mamaich said:
Here is Microsoft Cleartype Tuner.
Click to expand...
Click to collapse
Thank you!!! So is this file will refine the ugly font of WM2003SE lanscape Cleartype?
working good mamaich!
still my widcomm BT stack cannot restart once in awhile..any tweak on this?
Tnx.
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
Click to expand...
Click to collapse
Mine is working fairly well... I did notice the same problem you have, but I got around it by holding in the reset button until it reset itself (normally 5 secs or so). It resets fine every time. This is a pain compared to 1.66.00WWE. I haven't tried 1.72 yet. I would like to persist with the 2.06 version to see what bugs it has.
Recrem...
UPDATE:- Installing XCPUScalar Version 2.85 has completely cleared up the reset hang problem. I have configured it to auto start on soft reset, and minnimise on start. I have now reset well over 10 times and it resets as it should. I have XCPUScalar set to a min speed of 400MHz though...
I have only one problem with wm2003se 2.06 - at every call speaker mode turns on automaticly
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Thanks man ! the tuner is great but still the font is bad in 2.02t1 it was much better with 2.06 but i changed it because it get stuck on reset!
could you please post the clear type file from 2.06?
thanx in advance :wink:
gerald8297 said:
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Click to expand...
Click to collapse
Yeap i encountered this problem too. Any solution so far? Or shall i reflash my rom to dcs one 2.02? Would it solve this problem?
Anyone pls HELP......
My list of problematic programs in SE
1. Mamaich's "Contact Button", which I miss dearly.
2. Pocket Zen Phone.
3. BTtools freeze Today screen. (not needed for functional purposes, only used to turn BT off automatically)
4. Still have to use EzWAP for MMS
5. Camera switch screen back to Portrait.

WM2003SE 2.06 working 99%

Hello folks
Some of you will probably know that i am running 2.06WWE with orange ext rom on my M1000.
After several days of testing different settings etc and after talking with darren_the (respect to you man) and with help from SIN,
I finally have my M1000 running WM2003SE with BT activesync and BT Headset running 100% - just like i want it
My question is this :-
Does anyone know why the BT headset today plugin keeps disappearing and can this be fixed as it is really annoying.....
cheers again for everyones help.
(gonna go and play know)
BT headset today plugin keeps disappearing
This happen to version 2.02Ti & 2.06
as far as I know
:twisted:
Hi darran mate, i gathered that..... is they anyway to fix it
u said that u're using 2.06, but AFAIK it's the most bugged version of all the four (2.02, 2.06, 2.2CHS, 2.2ENG-TRANSLATED)... have you changed anything, ext-rom aside?
Anonymous said:
u said that u're using 2.06, but AFAIK it's the most bugged version of all the four (2.02, 2.06, 2.2CHS, 2.2ENG-TRANSLATED)... have you changed anything, ext-rom aside?
Click to expand...
Click to collapse
tought i was logged-in.. :? :? 8) :roll:
Seems to work okay for me, it does what i need it to do so.....
I tried 2.02 first a while back but could not get me BT headset to work with handsfree (no mic)
Went back to 172, for a while and tried various landscape and skinning apps, nothing was really 100% so went back to 2.06/w.02 merged from sin.
This worked great with my bt headset in headset mode and bt activesync, but i hard reset by accident and ended up with 2.06 basic
everything still worked so i'm sticking with it until sin gets his merged rom single update package uploaded or buzz lightyear completes his translation of the 2.20.07 chs rom.

questions after upgrading to WM6

1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.

Categories

Resources