Hi All
I have received a Atom Life which loses network in 5 secs. Can somebody please post here the latest ROM upgrade.
BR
Somebody please help here...It is Urgent.
can't you download it from seeo2.com?
One can only do online upgradation in seeo2.com.when I try to upgrade the rom it says the device is does not require update.
Pls Advise
BR
Try to disable the auto selection of the Radio mode... Select GSM or UMTS only...
Hi,
Same goes to my Atom Life. Even I set it to manual selection, after a while it will become no network and reset it to 3G network.
I am using a 3G sim card, selected manual GSM network. It auto search for 3G after the network lost. When check the setting on the phone setting, it still show manual selection.
Contacted the local O2 helpdesk and waiting for their testing reply on monday.
Note: this is my 2nd sets having 1 to 1 exchange on thursday. Previous set having problem with the handset speaker. Have to use headset to make calls.
But no problem with network issue when i set it to manual selection with GSM network.
Also from the tech support guy that the new ROM will be soon available (2-3 weeks time).
Regards,
Ric
Related
Hi there, I am wondering if it is possible for the XDA to work in Australia. I have the upgraded rom from Xda devellopers and have removed the sim lock, but it dosen't seem to pick up the Aus networks.
Any help would be great
What for device are you using? PW10A or PW10B?
Maybe it's a problem with the GSM-networks. PW10A is for 900/1800MHz and PW10B for 900/1900
Have you tried to search manual for any available services?
Stefan
How do I find out the PW10a or b info.... The other version info is as follows
ROM Version; 3.17.03 ENG
Radio Version; 4.21.00
Protocol Version ; 32s54
Sorry, found it....PW10A1
I am guessing no one has any help or info about this. what a wasted purchase.
The XDA/XDA II/XDA III (IIs) do work in Australia.
Where is your XDA from, country? What network are you trying to connect too down here?
I have been told it is from the UK. I purchased it 3rd hand so I can only go by what the previous owner has told me.
In the auto config screen, I get the options for 02 network from UK, Ireland, De and a few others.
I am wanting to connect it to an Optus network preferrably, but any would do.
I have tried Optus (plan and prepaid) and telstra plan, but no signal shows up.
Just clarifying, you have tried Optus and Telstra phone services or data services?
You verified the SIM's worked in another phone?
The sims are able to be swapped into various phones, I have a panasonic gd50, a nokia 7250 and a motorola v600, and an ericson (can't remember what model) and they all work in each other.
The sims are set up as phone service, ie: normal mobile usage, I have even tried an optus prepaid in it.
I am only wanting to use it for the phone service, gprs and net usage is not of interest as yet.
Howdy, I have the same model and it works fine on Telstra. I originally had problems with SIM lock and GID lock, but after upgrading to 2003 from lumpistefans kitchen I've had no problems with it! Good reception and minimal drop out. It's not a waste of money. The ROM i used was the O2 one and did not use the auto config, it finds it for itself and aknowledges the telstra network fine. If you go to an Optus shop they should be able to help, they also have pretty good phone help and should be able to talk you through the settings,
Good luck!
Peace,
Robert
Thanks Ryap. I am thinking that it should automatically find the network tho......is this not the case
I know on XDA II and PDA2K you can select the network or set it to Automatic. Might want to check this setting.
SETTINGS > PERSONAL TAB > PHONE > NETWORK TAB
I am thinking that it should automatically find the network tho......is this not the case
Click to expand...
Click to collapse
I think you are confusing the autoconfig of the device with the network setup for the phone.
You can cancel the autoconfig that appears at the end of a hard reset. This just gives you some quick settings for the GPRS and MMS networks - you can add these later after talking to Optus.
Once the SIM is in, you need to make sure the phone is on by switching OFF flight mode. This kicks the phone in. Then if Optus is not picked up as your default network you just go into Settings>Phone>Network and then use the Find Network button and then the Set Networks button. After that you can check the Automatic Network selection button to make the settings stay.
Flickster
Hi all, thanks for the support so far,
As of now, I can't get any network at all....still.
when i insert the sim and enable the phone it says serching, but thats about it.
I have no idea where to find the flight mode, and when I click on the phone in the settings screen, nothing happens.
I don't get any carrier name or logo come up and appear.
Cheers
Michael
On XDA II (don't have XDA) when the phone senses a service it puts four vetical bars next to the speaker/volume icon at the top of the screen. If you tap the bars it should bring up a pop-up, this is where there should be a line (link) to click on that says "Turn off flight mode". I am not sure if this is part of the original XDA though.
When you clicked on the PHONE icon under SETTINGS it didn't do anything?
At the top bar, next to the speeker, I have a tree type logo and when i tap it it says searching. When i open the phone and then click options, it freezes for about 5 maybe 7 mins and then the settings screen opens, from there it freezes and i can't select anything
Hi all.
I am greatful for you help and support up till now.
I have managed to fixmy problem.
When putting the xda devellopers rom on the pda, ther eis an option calledGSM Band in the programs list.
Well turns out it was set to 900, so i changed it to 900/1800 and rebooted the xda.
WELL HEY PRESTO, IT FOUND THE OPTUS NETWORK
So all is good and all works.
As I mentioned before I am greatful for all the support and thankyou to all who racked their brains over this.
Hi,
Apologies for this question, but i cant get 3G sign in my mobile, while other Nokia n73 can get it. I updated my radio to v1.43, and still no [3G] sign...
In some areas i get [G] which means GPRS signal, and in other areas i got [E] which i don't know what does it mean... Any ideas??
Thx in advance
E = Edge...
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
pop20032004 said:
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
Click to expand...
Click to collapse
Hello,
You say that your Nokia can receive a 3G signal and the Hermes cannot - are they both using SIM cards from the same provider and if not then do both providers supply a 3G signal where you are trying to use the Hermes?
If you should be able to receive a 3G signal on your current provider then I'd suggest you try the following:
1. Check the settings of the Hermes Phone. Try looking at the band selection setings by going to Settings - [Personal] Phone - Band Tab then checking that the Network type is set to Auto. The screenshot below shows the screen that I mean. If this is set to GSM then change it to Auto and see if that fixes the problem. If not then try...
2. Force use of 3G. Even with Auto selected your Hermes handset may be using 2G because that signal is much stronger than the 3G signal. You can force the handset to try 3G only by using a 3rd party application such as Bandswitch (an excellent product by Daniel Herrero - see his posts here: http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch). You can download Bandswitch here: http://commmgrpro.com/_wsn/page2.html. Try using this application to set the handset to 3G and see if that works.
If you should have a 3G signal but none of this helps then it seems you have a problem that may need warranty attention. Is the handset new?
Hope this helps
Hello Tony,
Thank you for your reply. I tried what you advised. Still Cant Capture the 3G signal...
Also, i tried an application called "fieldtest_157.exe". It is described somewhere in this group. I can't find any signal (zero values) for anything related to WCDMA, UMTS, and 3G
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Madcap180 said:
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=283797http://forum.xda-developers.com/showthread.php?t=284201
Mike
Hi Mike,
Have added this reg tweak. It added WCDMA & a couple of protocols in the band section of phone settings. Non of them is working... Is it possible that my radio has a problem? I'm using GPRS very well, and i have excellent GSM connections... What could be the problem?
Hi all,
Just received my Atom mgw life, upgraded it to the latest ROM from MGW's site, it's running mobile 6 pro.
I popped in the AT&T sim from my tilt into the atom and first see that the auto configure has no option for the united states...
any idea how I can update that? or...
I do have a signal from AT&T my provider with my sim but I need the 3g config if someone has it including any necessary proxy setup.
Guess I need to do it manually
I have a strong signal on the atom with the sim but when I dial my sim phone number no ring on the atom..
any suggestions? Thank you!
Settings/internet/Add a new modem conection/My connection 2/3G.
Basic Connection Help
The phone will not even receive or send a call yet it shows bars and says "3G" as if all is well.....AT&T did not know...they said the sim is fine.....phone is new....any suggestions anyone?
When I try to make a call the bars disapear, auto hangs up 3g disapears and I then get a "no service" message.
Appreciate any suggestions! Thanks
jrn8265 said:
The phone will not even receive or send a call yet it shows bars and says "3G" as if all is well.....AT&T did not know...they said the sim is fine.....phone is new....any suggestions anyone?
When I try to make a call the bars disapear, auto hangs up 3g disapears and I then get a "no service" message.
Appreciate any suggestions! Thanks
Click to expand...
Click to collapse
i have it on tmobile just find any of the form that have the at&t cab setting and just download it to your phone, i have all the cabs working on my atom life tmobile cab myfaves cab 599 plan, i got my cabs from the att tilt section of the form
i have installed MiniCM7-2.0.7 in my X-10 MINI about 1 month ago. Till last night it was working fine.
But last night i got a problem which still persists. I am not able to get the Network signal bars in my phone and due to which i am not able to connect the call or do the internet. But the phone is showing the carrier name in notification bar while pulling down it.
However, i Have tried installing the rom again before complete wipe-up but the problem persists.
please have a solution!
Try this way.. Go to settings->wireless settings->mobile network->network operator ..and then select the operator manually.. I guess it should work..!!
Gintonic.SE + zombie-pack kernel by slade ..
tried dial *#*#4636#*#*
select "phone information", you can view every information regarding your radio quality, the signal strength, network band, etc.
press menu button and "select radio band", test it one by one, if you unsure select "automatic"
if everything failed, the problem might be your simcard or your network operator setting, you should contact your network operator customer service.
(i doubt it's your phone hardware/software problem, unless you just force unlocked bootloader that your phone didn't meet the criteria to be unlock)
not solved the problem!
anyone..........
Hi Seniors,
I'm looking for your solutions.
I bought new XOLO Q800,
After few weeks only I found that it's not working on 3G mode.
i.e. if I select WCDMA only mode It is showing No Tower(Signal) at all.
and If I set to AUTO(WCDMA/GSM) mode it Shows signal.
In AUTO mode It connects only to EDGE not on 3G.
I tried many possibilities like flight-mode/wifi-on-off/removing -reinserting SIM .. lot..
Info may help senior to understand problem:
SIM: AIRCEL INDIA
in AUTO mode:
When I search network manually,
It shows All 2G and 3G tower in that area.
like
AIRCEL2G
AIRCEL 3G
...
..
and I'm able to Register to AIRCEL 3G in AUTO mode.
but still internet connecting to EDGE
In WCDMA only mode:
When I switch it from GSM only mode or AUTO mode to WCDMA only mode.
It Shows no Signal(Tower)
in Manual mode If i search for Network,
It Shows
AIRCEL 3G tower. but I can't Register to this AIRCEL 3G tower in WCDMA-only-Manual mode.
It says "Can't Register to the Network Right Now"
Please Help me! I will send whatever details u asks about my phone.
I sent my device to service center once for this issue. They said repair done. but I'm still facing same problem( They changed my IMEI !!! , but still same phone/screen with my screen guard)
If I contact them now, they r not responding properly.
Sorry Its Not a HW failure, Its Fault with SIM
gold4653 said:
Hi Seniors,
I'm looking for your solutions.
I bought new XOLO Q800,
After few weeks only I found that it's not working on 3G mode.
i.e. if I select WCDMA only mode It is showing No Tower(Signal) at all.
and If I set to AUTO(WCDMA/GSM) mode it Shows signal.
In AUTO mode It connects only to EDGE not on 3G.
I tried many possibilities like flight-mode/wifi-on-off/removing -reinserting SIM .. lot..
Info may help senior to understand problem:
SIM: AIRCEL INDIA
in AUTO mode:
When I search network manually,
It shows All 2G and 3G tower in that area.
like
AIRCEL2G
AIRCEL 3G
...
..
and I'm able to Register to AIRCEL 3G in AUTO mode.
but still internet connecting to EDGE
In WCDMA only mode:
When I switch it from GSM only mode or AUTO mode to WCDMA only mode.
It Shows no Signal(Tower)
in Manual mode If i search for Network,
It Shows
AIRCEL 3G tower. but I can't Register to this AIRCEL 3G tower in WCDMA-only-Manual mode.
It says "Can't Register to the Network Right Now"
Please Help me! I will send whatever details u asks about my phone.
I sent my device to service center once for this issue. They said repair done. but I'm still facing same problem( They changed my IMEI !!! , but still same phone/screen with my screen guard)
If I contact them now, they r not responding properly.
Click to expand...
Click to collapse
Last Day I have fought with my Q800+SIM to found that its a 3G fault with network. not with HW device.
When i sent a msg to AIRCEL START 3G to 121. they sending me msg that 3G activated already. but they have not activated in real.
I used my 3G/4G dongle AIRTEL SIM in WCDMA only. it worked fine, later I discussed with AIrcel and confirmed that 3G not activated yet on My SIM.
Thanks those wish to Help.
Please help. I'm facing the same problem.
I also inserted the same Aircel sim in first slot and Vodafone in the second sim slot. Even Vodafone sim is not working in second sim slot. :/
Facing the similar problem
I have also same issue with my Xolo Q800.
Mobile data is not at all working in my mobile. No 2G, no 3G.
I sent an email to customer care. They said format the mobile to factory settings. I did it but still same issue.
If someone finds a solution, please reply.
-Srinivas
Dear Frnd
Dear frnd, has the phone been rectified? Even I face the same issue.Kindly advise.What shall i do to solve this problem?Why s the problem coming?
gold4653 said:
Hi Seniors,
I'm looking for your solutions.
I bought new XOLO Q800,
After few weeks only I found that it's not working on 3G mode.
i.e. if I select WCDMA only mode It is showing No Tower(Signal) at all.
and If I set to AUTO(WCDMA/GSM) mode it Shows signal.
In AUTO mode It connects only to EDGE not on 3G.
I tried many possibilities like flight-mode/wifi-on-off/removing -reinserting SIM .. lot..
Info may help senior to understand problem:
SIM: AIRCEL INDIA
in AUTO mode:
When I search network manually,
It shows All 2G and 3G tower in that area.
like
AIRCEL2G
AIRCEL 3G
...
..
and I'm able to Register to AIRCEL 3G in AUTO mode.
but still internet connecting to EDGE
In WCDMA only mode:
When I switch it from GSM only mode or AUTO mode to WCDMA only mode.
It Shows no Signal(Tower)
in Manual mode If i search for Network,
It Shows
AIRCEL 3G tower. but I can't Register to this AIRCEL 3G tower in WCDMA-only-Manual mode.
It says "Can't Register to the Network Right Now"
Please Help me! I will send whatever details u asks about my phone.
I sent my device to service center once for this issue. They said repair done. but I'm still facing same problem( They changed my IMEI !!! , but still same phone/screen with my screen guard)
If I contact them now, they r not responding properly.
Click to expand...
Click to collapse
aadithyacb said:
Dear frnd, has the phone been rectified? Even I face the same issue.Kindly advise.What shall i do to solve this problem?Why s the problem coming?
Click to expand...
Click to collapse
Hi, I could resolve it by rooting (yes). I have rooted and and upgraded to 4.2.1.
Even now I am having a custom ROM. No issues for me. In face now both the SIM slots have 3G feature.
cnuis2cool said:
Hi, I could resolve it by rooting (yes). I have rooted and and upgraded to 4.2.1.
Even now I am having a custom ROM. No issues for me. In face now both the SIM slots have 3G feature.
Click to expand...
Click to collapse
Hey plz tell me that which custom rom you use for it.
name of your custom rom and which network do you have.
i'm facing the same problem.
:'-(