[Hermes] Gsm connection problem - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hello,
I have a problem in my hermes.
I power on my device and i can use the phone for some time, but after a while, the connection goes off, i cant receive or make calls.
I have so soft reset the device and then it keeps doing that again and again.
I installed 4 or 5 diferent roms. now i have the radio rom 1.40....
can anyone help me on my problem?
is that a hardware problem? maybe a problem in the antenna?!
Thanks in advance,
RGomes

Have you already solved your problem?
I have the same

Related

WiFi is not working

My WiFi is not working when I turn it on. When I turn it on, it just do nothing. I tried to run WLAN Module Test to check the problem using Self Diagnostics, sometimes it can detect the MAC address, means OK, but sometimes it shows error saying "GetAdapterInfo() return FALSE....".
For your info, I already reflash the updated ROM (0426), but it seems not working. Now, I'm using ATOM EXEC ROM (0721).
Can someone please help me before I send my ATOM to repair center?
You sure this isn't after an ActiveSync session? My device often needs a soft reset after a session.
Yeahhh... I'm very very very sure about this! Eventhough I didn't use Activesync, the same problem still happened.
I tried to downgrade the ROM, the WiFi still not working!
I have the same problem as idzilhafis.
Tried to run Self Diagnostic and got the same two answers, sometimes the module is correctly detected and somtimes not.
When the module is detected during the test, also the Access Point name is detected (I have a wifi AP at home), but the connection doesn't work.
When I use Wireless Manager, the module is not alwais detected and sometimes also the wifi button disappears.
Of course I flashed and re-flashed the firmware, using the original manufacturer's latest ROM and the "not for sale" version. Nothing changes.
May be an hardware failure?
I think, I can answer myself.
Yesterday in the evening I did put the Atom in the fridge for a while, because i noticed that using the pda and then increasing its temperature, the module was never recognized.
Using the pda after an hour of fridge (I did put it in a little bag), the wifi module works like a charm. It is ok until it's temperature raise again, then the module hangs.
Such a behaviour is typical of an hardware fault.
I think that this kind of problem is surely not due to a wrong use, and should be covered by warranty. But I don't know where to send it for service (I'm in Italy).
Any idea?
I had tremendous problems with my O2 Atom WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 Technical People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
No, it proves that any ROM upgrade can result in strange things, and reflashing either the same ROM or another ROM can fix it. It's well known with stuff like battery use (some users have had their standby time doubled by just reflashing the same ROM).
I sent to o2 expert and he don't know what to do. Tried to change registry, still not working. Tried to reflash, stillnot working. I think hardware problem. Don't worry, I still got warranty!
Hi All, I'm a newbie.
Pls shows me where can I download this oldrom O2 Atom 2006123 (-45)?
Or Who can give it to me through email: [email protected] ?
Help me pls, tks a lot

Hardwaredamage trou faulty Flash possible?

Hello,
yesterday i was flashing a new rom to my prophet and for some reason i got a bluescreen while doing it. and the process stopped at 60%
after flashing again without problems i face some poblems.
sometimes it takes 1 or more softresets for the cell to find my network.
wlan ist not working at all. i can find a present network but when i try to log in i allways get the message network unaviable.
i tried to install the original o2 rom that came with my device but i have the same problems
just that it finds the wlan network and as soon as i enter the password the complete call hangs.
so now i have the shadow "my edition" 2 rom on my phone but i cant get it running it goes till "tap the screen to set up your Windows..." and then nothing happens anymore
i can not even get to the bootloader the phone just does not boot when i hold any button during boot. only thing working it hardreset but that does not change anything
before i tried to flash a new rom i was using the "my edition" 2 rom and everything was working fine but now after the crash it does not work anymore
i managed one time to get it running compleatly but wlan did show the same problems as under othe roms
could it really be that i damaged the hardware durning my abortet flash?
can anyone offer some help how to fix this?
IT seems unlikely that you have damaged the hardware, but it is possible.
Can you enter bootloader? If so, disable connect through USB in activesync, connect the device, and run a NVID AKU 2.2 WM5 ROM. See if the problems persist with this.

My lg optimus P690 sim card not detected airplane mode always ON

guys could you help me in this one.
this is my first post in xda forum and I hope I posted the right section.
My phone has so signal at all
It says "no sim card"
there's an 'x' in signal bar
airplane mode is always on and if you turn it off, is stucks saying "enabling wireless connections" and doesn't turn off
mobile network settings are disabled
Status:
My phone number: unknown
Network: unknown
Mobile network type: unknown
It happened after I flash my phone with cyanogenmod ROM, i flashed a couple of google apps and a custom kernel. I THINK when i clicked a certain CPU speed in overclocking, it kinda stuck and restarted and had no signal at all... I flashed it again a couple of times even the beta cyanogenmod and dardroidXD, factory reset, wipe data, cache, remove battery. i flashed it with the original firmware with different version but still no avail.. Do you have any idea to solve my problem?
I appreaciate your help, thanks!
Same Thing...
The exact same thing happened with my phone, after I flashed my phone with a custom rom then the kernel, I overclocked then my phone kinda hang then there no more signal. I also tried to reflash the ROM, the kernel then my last resort, the original firmware, using kdz updater but then still no signal. Help us, still giving me no signal. Airplane mode still can't be switched off.
anyone? please I need help T_T
same problem, pls help!
Facing the same problem.Please help!
Anyone? Please I need your help as I am unable to use my phone and I cannot contact anyone because of this.
Anyone??
Please I need help
same problem but it occurs daily once and then works fine after a restart
I faced the same problem suddenly the radio turns off and after a force restart all works fine again! but still i have lost my faith in lg
Anyone knows what to do to get rid of the daily procedure of restarting?
Thanks in advance
Regards
varun

WIFI hotspot turns on randomly?

I am running the stock ROM and my hotspot keepts randomly turning on, any ideas? Is there some setting that I need to check to stop this?
Phones haunted try an exorcism
Tried factory reset ?wipe devil cache
reply
I have the same problem.. did u solve the problem??
i think prmission manager would b helpful
I am facing the same issue
Did you guys found a solution to the problem. If yes, please let me know as this is so annoying and it's happening too frequently in my xiomi note 3 phone.

Wifi and Sim connection doesn't work properly

Hello Everyone,
I'm having an issue on my Zenfone 6 (ZS630KL) android 11, not rooted, that everytime my device lost connection of wifi and sim connection after some time on. Somehow, it reconnects after restarting the phone, until the problem reapppears again. It is quite annoying have to do it everytime, so i try some troubleshooting like: refresh firmware, factory reset, try older firmware; and no success.
Would it be a hardware issue?
I think this problem strange and I would like some suggestions, solutions. If you guys want more information to help me, I'll be available.

Categories

Resources