Related
Although everyone (if not most of us) by now has known that the HP rw6828 is a rebadged XDA ATOM. Apparently, this device, though slower than our current AKU3.3 ROMs seem to have a newer set of device drivers.
These device drivers are essential in the upgrade of our ROMs. Should we wish to port WM6 into our Atom, we will need the most up to date device drivers.
Unfortunately, we couldn't hack the lock on HP Official ROM. So, we though that if some generous soul with access to an HP rw6828 can dump the ROM from the device to an SD Card. This would be a lot of help!!!
Also, if someone knows how to decrypt the official ROM... this would even be better!
Jiggs
I Want Use Atom Rom For My Rx6828, Hp No Rom Update!!!! Angry!!!!!!
My Rx6828 Use Aku 2.2 Only!!!!!!! Now Is 3.3 Or 3.5 Now!!!
Who Can Help Me!!
Thanks
tiveyau said:
I Want Use Atom Rom For My Rx6828, Hp No Rom Update!!!! Angry!!!!!!
My Rx6828 Use Aku 2.2 Only!!!!!!! Now Is 3.3 Or 3.5 Now!!!
Who Can Help Me!!
Thanks
Click to expand...
Click to collapse
this is not possible because HP has placed a lock on you RUU. If we try to trick it to use Atom bootloader, it will check CRC. Are you willing to try??? I will make an ATOM bootloader for your HP. BUT there is a big RISK on this.
Jiggs
How To Do It?
Let Me Try!
jiggs said:
Although everyone (if not most of us) by now has known that the HP rw6828 is a rebadged XDA ATOM. Apparently, this device, though slower than our current AKU3.3 ROMs seem to have a newer set of device drivers.
These device drivers are essential in the upgrade of our ROMs. Should we wish to port WM6 into our Atom, we will need the most up to date device drivers.
Unfortunately, we couldn't hack the lock on HP Official ROM. So, we though that if some generous soul with access to an HP rw6828 can dump the ROM from the device to an SD Card. This would be a lot of help!!!
Also, if someone knows how to decrypt the official ROM... this would even be better!
Jiggs
Click to expand...
Click to collapse
How to dump the Rom to SD Card. Can you guide me thru?
pprakash said:
How to dump the Rom to SD Card. Can you guide me thru?
Click to expand...
Click to collapse
search xda-developers for tool: grab_it_64 by buzz_lightyear
BTW, homer285 has already given me the ROM dump. Am now working on it
Jiggs
tiveyau said:
How To Do It?
Let Me Try!
Click to expand...
Click to collapse
give me a couple of days. I need to work on it. The Atom has an extended partition unlike the HP which has NOT. There are applications that need to be migrated to work on your device IF the bootloader that I am going to prepare for you will work.
Just keep posted on this thread.
Jiggs
PS: there is already a AKU2.6 for the HP in the official website. You can try that while waiting.
@jiggs
anything i can do to help?
-=[serialzs]=-
serialzs said:
@jiggs
anything i can do to help?
-=[serialzs]=-
Click to expand...
Click to collapse
I'm still testing the hp kernel with our device (fingers crossed)
Keeping the fingures crossed Jiggs. Hoping to see an Updated ROM soon
Fingers Crossed...
Cant wait... Hope all goes well.
hi all
i can dump Titanium version 2.6aku,let me know.
good work jiggs
testing
Has this got to testing yet and if so hows it all going. Have problems with my rw6828 not connecting to certain Symbol access points seems this is a known issuse between WM5 and Symbol
Wanting to test another image for it to see how i get on.
rx6828 wait wait wait atom rom
hope my rx6828 can use atom exec rom.....
if can use atom life wm6 is bonus!!!!
wait wait wait
reply
But waiting takes so long
I would say there seems to be some misunderstanding within the HP community..... The idea of hacking the HP rom was infact not to benefit any HP user, rather to benefit the Atom with the latest device drivers in hope of using these drivers within the WM6 or Crossbow upgrade. However it seems HP device drivers cannot be used for the Atom (so far anyway) therefore I seriously doubt any cooked or custom rom for HP, unless jiggs can somehow swing it almost blindfolded as he doesnt use the HP.
jiggs said:
this is not possible because HP has placed a lock on you RUU. If we try to trick it to use Atom bootloader, it will check CRC. Are you willing to try??? I will make an ATOM bootloader for your HP. BUT there is a big RISK on this.
Jiggs
Click to expand...
Click to collapse
What is RUU?
Since HP rw6828 and Atom is identical in hardware, is it possible to erase the whole rw6828 ROM and replace it with Atom ROM? What's preventing it? Anyway to hack this protection?
capfelix said:
What is RUU?
Since HP rw6828 and Atom is identical in hardware, is it possible to erase the whole rw6828 ROM and replace it with Atom ROM? What's preventing it? Anyway to hack this protection?
Click to expand...
Click to collapse
RUU- Rom Upgrade Utility
The bootloaders for Atom and HP is not identical. You need the Upgrade/Update Utility to put the ROM into your device. BUT, the RUU in hp checks each file component (radio, ROM, bootloader update, etc.) prior to flashing it to the device. Unlike the Atom DSUU, which checks only the filename and flashes it to the device.
To hack it is to unsign it. Well, someone has to do it. I can't.
jiggs
another way to get HP's firmwire is dumping whole ROM using pmemdump from itsutils
jiggs said:
RUU- Rom Upgrade Utility
The bootloaders for Atom and HP is not identical. You need the Upgrade/Update Utility to put the ROM into your device. BUT, the RUU in hp checks each file component (radio, ROM, bootloader update, etc.) prior to flashing it to the device. Unlike the Atom DSUU, which checks only the filename and flashes it to the device.
To hack it is to unsign it. Well, someone has to do it. I can't.
Click to expand...
Click to collapse
Are you saying your plan for hacking the rw6828 for use with XDA Atom upgrade stop here?
Hi Gene owners.
I was contacted by orefkov to create a Hard-SPL for Gene... which I've done, and he tells me it works fine, thing is, I'm not seeing it here, so I'm currently trying to get hold of him to see what address he loaded the SPL to in order to get started with it.
Stay tuned.
Cheers,
Olipro
well that address is easily readable from SPL MMU setup, but anyway, we still need testers just to test it some more.
there are many chinese user, the chs rom didn't relz,plz hepl us .
the chinese ver didn't looks like the russ ver, the chinese ver spl is 1.02.000
Hi.
Start address is 0x10000000
Witch features will be in Hard-SPL for Gene?
it's work on rss ver,not chinese ver
Can the Hard-SPL suit to the edition in China on the edition of Russia base ? As I know, the SPL of the edition in China is 1.02.
Nirvana y are u double posting ..
SPL is independent of the sodding ROM base, that's got nothing to do with anything
All D600 users, including large numbers of Chinese users, hope you could develop USPL and HSPL of D600.But recently, it seems that you were very busy, and have nothing worked out.We sincerely hope you give us users a big surprise as soon as possible. Happy New Year to U!
2 nirvana1981
Did you try http://forum.xda-developers.com/showpost.php?p=1785052&postcount=13 on your D600 ?
use it ,but it's didn't work.after white, the D600 reboot.
i am gonna try it tonight
i am also using a chinese version Dopod D600
hope i can get it work
nirvana1981 said:
use it ,but it's didn't work.after white, the D600 reboot.
Click to expand...
Click to collapse
hey nirvana 1981
any thing happened to ya device after the white screen
i mean any damages
orefkov said:
2 nirvana1981
Did you try http://forum.xda-developers.com/showpost.php?p=1785052&postcount=13 on your D600 ?
Click to expand...
Click to collapse
Dear orefkov
can i flash my dodpod d 600(Gene) with roms for other devices(such as Prophet)?
thanks
No. .
waiting for uspl or hspl ,can't flash any rom in gene.
hope someone could make a wm6 rom for gene users in the near future
we really need it here
thanks
we need the hSPL the first。the cook wm5 the second.
and then the wm6
Olipro said:
Hi Gene owners.
I was contacted by orefkov to create a Hard-SPL for Gene... which I've done, and he tells me it works fine, thing is, I'm not seeing it here, so I'm currently trying to get hold of him to see what address he loaded the SPL to in order to get started with it.
Stay tuned.
Cheers,
Olipro
Click to expand...
Click to collapse
hi nirvana1981
didn't u read the above post
the HSPL is already out there
u just need to ask either orefkov or Olipro
hope this can help u mate
hi how do i get SPL 3.5 to run on my Athena? so i can flsh up the new Rom ?
hope you can help
thanks
lidan
lidan25 said:
hi how do i get SPL 3.5 to run on my Athena? so i can flsh up the new Rom ?
hope you can help
thanks
lidan
Click to expand...
Click to collapse
You need to download AP 4.0 rom and run it as exactly told in the instructions, Follow them to the letter or you may mess up. Once thats loaded you can either run that rom or try the new AP 5.0 beta. once you have AP 4.0 on your athena you will have SPL 3.5 on as well. However you cant go back to using shipped rom's without using a SPL 3.5 type rom or swapping your SPL back, and I dont know how that is done.
Just read up first before doing anything!!!!
All the best
Jay
thanks
thanks i will look up for the info in hare so i will not have a problem to get it runing !!
lidan25 said:
thanks i will look up for the info in hare so i will not have a problem to get it runing !!
Click to expand...
Click to collapse
No worries, But I cant stress the read the instructions first bit enough. No end of people have had problems by jumping the gun, including me!! I didnt take out my SD card and by the time I had realised what had happened it was to late. You can normaly get the rom onto your athena if you mess up, but you usualy end up without WiFi. so then that has to be sorted. Pawel and Irus have made some very good roms on SPL 3.5 and irus has added an HTC shipped rom if you want to go back to basics.
Jay
AP 4.0 rom
so shud i run this rom update ?? is this Irus Rom ? http://forum.xda-developers.com/showthread.php?t=390328
are shud i be runing on the 6.0 ??
what shud i run if you are me ?
can you post the the link of Irus Rom and what do i need to do so i will have SPL 3.5 on my Athena and will not kill my Athena !!
lidan25 said:
so shud i run this rom update ?? is this Irus Rom ? http://forum.xda-developers.com/showthread.php?t=390328
are shud i be runing on the 6.0 ??
what shud i run if you are me ?
Click to expand...
Click to collapse
I'm not sure if you need WM 6.0 first, but if your ok with flashing roms then do WM 6.0 first!
Ive put the link you need on my post above.
And its a matter of personal choice if you want the roms or not. read the contents of them and make a choice. Pawels roms 4.0 and 5.0 are from the x7510 so about as good as you get. Irus roms are WM 6.1 so also very up to date. You do get a few minor bugs in cooked roms though.
Jay
i am with WM 6.0
i have no need to upged to it !!
but i was on to update to WM 6.1
and if Wifi will not work on AP4 so it is no good for me i need to know whats the best and will not be to bugy thats all !!
i have X7500
is AP 4.0
are Irus
will run on it ?
Flash AP4 - just follow the instructions and it will all work.
AP5 is still beta (but a very good one)
Or you could just flash one of irus' ROMS but I'd recommend AP4
whats the probleme with wifi in AP 4.0? i hare it isnt working
is thare a fix for it ??
lidan25 said:
i am with WM 6.0
and if Wifi will not work on AP4 so it is no good for me i need to know whats the best and will not be to bugy thats all !!
i have X7500
is AP 4.0
are Irus
will run on it ?
Click to expand...
Click to collapse
You misunderstood, if flashing AP 4.0 goes WRONG then you end up with WiFi not working till its fixed! If you do everything right then everything runs well!
You will get a bug or two on any cooked rom, even shipped roms have them. but read the thread and you can see most have a cure!
Jay
As responderman said - it only doesn't work if you don't follow the instructions. Follow them and it works.
If you can't follow instructions don't flash your phone.
Igo 8 will work i did see a post in hare that thay say it may not work have you test'd it do you know any thing on that problem ?
man i think i am in to asking it that i am new with this 1 i had flsh't all my ppc but this 1 i didn't yet so i am like on a bit confused what to do and if i do it what Rom is best i know that i had Kaiser i liket the WM6.1 on it and for me to go beck to WM 6.0 is a big problem thats why i am in to asking all of that thing's !!
I think it's better to unlock only to spl1.2 and not 3.5 because spl3.5 device cannot come back to 1.2 at the moment. With spl3.5, you can only use ap3, ap4, and ap5, not not the stock rom.AP4 and 5 has many unresolved issues at the moment, so some users found themselves having to use ap3 at the end.
A smarter strategy is to go spl1.2, and you can use pk1, pk2, pk3, irus vanilla, irus lite, irus full, irus AP4, stock rom (many versions here), wm5 (technically possible, but I know of only one user who prefers that). Irus ROM is faster than AP4 and 5, according to a user who had used both. SPL1.2 leaves you with more memory too.
Ap5 in spl1.2 will very soon be available. Many spl3.5 users are waiting for the tool to come back to spl1.2, and they would love the chance to make this choice of spl once again.
eaglesteve said:
I think it's better to unlock only to spl1.2 and not 3.5 because spl3.5 device cannot come back to 1.2 at the moment. With spl3.5, you can only use ap3, ap4, and ap5, not not the stock rom.AP4 and 5 has many unresolved issues at the moment, so some users found themselves having to use ap3 at the end.
A smarter strategy is to go spl1.2, and you can use pk1, pk2, pk3, irus vanilla, irus lite, irus full, irus AP4, stock rom (many versions here), wm5 (technically possible, but I know of only one user who prefers that). Irus ROM is faster than AP4 and 5, according to a user who had used both. SPL1.2 leaves you with more memory too.
Ap5 in spl1.2 will very soon be available. Many spl3.5 users are waiting for the tool to come back to spl1.2, and they would love the chance to make this choice of spl once again.
Click to expand...
Click to collapse
whats spl1.10.000?
if i have this what can i do ?
read this link http://forum.xda-developers.com/showthread.php?p=2236522#post2236522
lidan25 said:
whats spl1.10.000?
if i have this what can i do ?
Click to expand...
Click to collapse
Mate read this page! http://forum.xda-developers.com/showthread.php?p=2236522#post2236522
This guy had the same problem as you because he did not read the instructions
He solved it by reading the wiki and the links referenced.
We have told you what you are doing wrong as it is a common mistake.
Stop whinging and start reading!
My 2 Cents
Have a look at all the info on the several flavors of rom available for the Athena based decvices, choose the rom you feel fits your needs, take your time and follow the instructions (what ever rom you choose have a look at the ap4 wiki because it covers some issues that are WM6.1 related and are not AP4 unique) as with all cooked roms there may be some issues but if you follow instructions you should be fine (as already stated if you go with AP4 and upgrade to the new SPL 3.5 you can't go back for now, the AP team is working on a path back to the factory roms).
Cheers
BR
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Hello,
here looking after these Rome.
-- Qtek 2.20.739 GER, NVID
flashe it easy and (should work)
search then you the following things
-- SoftSPL
-- HardSPL
when you now without the SPL change want another rom-tuned want (WM6.1) use SoftSPL
-- Root copy
-- SPL Play
-- White screen
now connect USB and the right Upgrade_RUU.exe start (G3 or G4)
then about 10 to 15 minutes and wait for the new rom is installed.
You do not want any flash before the SoftSPL you can run on the first white screen and flash HardSPL.
Then, only the need to update / upgrades.
Download HardSPL and SoftSPL:
SPL variants
Hi!
Try this rom http://files.mail.ru/HZUAH1
It is an original shipped rom. It TAKES A WHILE TO INSTALL,but it worked for me.
If you have not already upgraded your IPL to 2.20 than check your device type, G3 or G4 http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Next upgrade your IPL http://forum.xda-developers.com/showthread.php?t=315016
Now try some 6.1 roms.
It worked for me.
Hope this helps.
Daravong said:
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Click to expand...
Click to collapse
why didn't you read the sticky threads?
dioxda2 said:
why didn't you read the sticky threads?
Click to expand...
Click to collapse
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Daravong said:
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Click to expand...
Click to collapse
hardspl your device.
it should be work.
varanusvincent said:
hardspl your device.
it should be work.
Click to expand...
Click to collapse
Wow Varanusvincent You are da best. Now I can downgrade to original rom.
Thanks you very much
Hello!
My question: Is it possible, on the HTC HTC MEGA without Gold Card Windows Mobile 6.5.3 to install? For positive responses, I would be very grateful.
Regards, Chriss1983
No, HardSPL is required for someone to create a custom 6.5.3 rom for the mega or wait for an official update.
And what 6.5.3 ROM did you find for mega?
I have this ROM:
ONYX 6 - WM 6.5.x ROMs
How long it will take to appear HSPL?
Its done when its done and that rom still wont work on touch 2, the 6.5.3 rom has to be cooked specifically for the device its going to run on.
In short, we have to wait for HardSPL and then wait longer for someone to cook a ROM.
Once again, it's done, when its done. We can encourage cooks by offering donations to the one that finally delivers the HardSPL and cooked roms.
Uppy said:
Its done when its done and that rom still wont work on touch 2, the 6.5.3 rom has to be cooked specifically for the device its going to run on.
In short, we have to wait for HardSPL and then wait longer for someone to cook a ROM.
Once again, it's done, when its done. We can encourage cooks by offering donations to the one that finally delivers the HardSPL and cooked roms.
Click to expand...
Click to collapse
Thanks, I now know more then.
Is it still possible to another HSPL zb. to install the HTC Touch Pro or Hermes on the MEGA.
Or how it looks with SSPL or USPL? Can one do something?
Non of the other HSPL procedures will work on Mega, every phone has a specific SPL. For other question - i heard something about USPL but dont know nothing about it.
And Uppy, i am the next one who will donate for HSPL
mirost1 said:
Non of the other HSPL procedures will work on Mega, every phone has a specific SPL. For other question - i heard something about USPL but dont know nothing about it.
And Uppy, i am the next one who will donate for HSPL
Click to expand...
Click to collapse
Okay, thank you.
the more people willing to donate the faster the HardSPL gets done, I thin zog-summin is doing it.
Any news on upgrading HTC Mega to WinMo 6.5.x? I saw that HSLP is out for a while...
racka_pw said:
Any news on upgrading HTC Mega to WinMo 6.5.x? I saw that HSLP is out for a while...
Click to expand...
Click to collapse
See other threads from this section: ROM dev!!!