messaging and PIE button disable? - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I did search, but didn't find anything...
I'd like to disable the messaging button and PIE button on my phone when I've got an active call. Whenever I'm on a call, and hold the phone to my ear, I end up pressing one or both buttons. It gets really tiring having to constantly close the messaging app, or PIE every time I get off the phone.
So, is there a way to disable those buttons with a call active?
Thanks

over2land said:
I did search, but didn't find anything...
I'd like to disable the messaging button and PIE button on my phone when I've got an active call. Whenever I'm on a call, and hold the phone to my ear, I end up pressing one or both buttons. It gets really tiring having to constantly close the messaging app, or PIE every time I get off the phone.
So, is there a way to disable those buttons with a call active?
Thanks
Click to expand...
Click to collapse
havent seen an app around that can do that...

Do I just have abnormally big ears?
It drives me nuts, anyone else have this problem?

No, you're not the only one!
over2land said:
Do I just have abnormally big ears?
It drives me nuts, anyone else have this problem?
Click to expand...
Click to collapse
Happens to me too - but usually it only happens when I jam the phone between my head and shoulder (hands-free mode )....don't think it's related to ear size....
Probably the only solution is to stick a BT headset in your ear and always answer the phone with that.....or press 'OK' a couple of times when you end the call!
Not much help, but at least now you know you're not alone
Mark.

True...
And, I think it might only happen when I have the phone between my ear and shoulder too... which ends up being like all the time.
Problem with the bluetooth thing, is two fold
1) I've not found one that is loud enough
2) I don't like wearing it all the time, so put it down... when the phone rings, and I pickup the bluetooth, and try to answer with it, the phone has stopped ringing by the time the phone and earpiece are paired...

over2land said:
Problem with the bluetooth thing, is two fold
1) I've not found one that is loud enough
2) I don't like wearing it all the time, so put it down... when the phone rings, and I pickup the bluetooth, and try to answer with it, the phone has stopped ringing by the time the phone and earpiece are paired...
Click to expand...
Click to collapse
...ain't that just the way
One thing I've just thought of, though I've not tried it yet....
If your phone is "locked" (from the today screen plugin) and a call comes in, you get the popup to show who's calling etc. - do the messaging and PIE buttons still operate in those circumstances? If not, you might just have found yourself a solution
Mark.

<locks phone>
Dunno, but not a bad thought.
I'll give that a shot, thanks

Related

Accepting phone calls

On jellybean
When I receive a phone call while the phone is off I get the option to either "Decline" or "Accept". I accept by pulling the green "Accept" button down and into the half circle. Immediately the phone turns off again, requiring me to push the power button again to turn it on. Although this is something that isn't terribly hard to do, it is annoying as many times I touch the speaker button. I would be nice if when I accept the call the phone would stay awake so I can just touch speaker.
I went through the settings but could not find anything. Any idea's?
mugsaway said:
On jellybean
When I receive a phone call while the phone is off I get the option to either "Decline" or "Accept". I accept by pulling the green "Accept" button down and into the half circle. Immediately the phone turns off again, requiring me to push the power button again to turn it on. Although this is something that isn't terribly hard to do, it is annoying as many times I touch the speaker button. I would be nice if when I accept the call the phone would stay awake so I can just touch speaker.
I went through the settings but could not find anything. Any idea's?
Click to expand...
Click to collapse
This is a known issue with the Proximity Sensor not working correctly. My phone does the same thing and I am currently in contact with HTC support. I will let you know what I find out
jdawg0024 said:
This is a known issue with the Proximity Sensor not working correctly. My phone does the same thing and I am currently in contact with HTC support. I will let you know what I find out
Click to expand...
Click to collapse
Ahh... Thank you
mugsaway said:
Ahh... Thank you
Click to expand...
Click to collapse
So after a couple emails back and forth with HTC. I have been escalated to a higher tech person. Waiting to hear back
Sent from my EVO using xda app-developers app

[Q] Bluetooth driving me wild

I am now on my third hands free car kit with my S3 and get the same issue with every one. I pair my phone. Connect my phone and it works ok for some time, could be an hour could be days. When working properly I press button on hands free kit to make voice call. Get a small sound to alert me to speak name of whom I want to call. When it works, it will then call the person I say. When it goes wonky, as it does, regularly, I press the button on hands free and await the signal to say the name. This time however, the sound that is made sounds all distorted and although the svoice screen appears on screen, it does not recognise what I say. I can receive incoming calls and answer them by pressing button at all times it just seems somehow to screw up the Bluetooth function every now and again. I have reset phone, did upgrades, (official ones, not rooted) and still happens. Anyone any ideas what issue is. As I mentioned it has happened with three different hands free kits I have bought so definitely the phone. Thanks for any help.
please read before posting
http://forum.xda-developers.com/showthread.php?t=2240291

Vibrate

This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
flimmyflam said:
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
Click to expand...
Click to collapse
I cannot get my vibrate to work again, if anyone has experienced this, please reply and let me know how to fix it, for now, i am giving up, and extremely disappointed
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
mortis2600 said:
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
Click to expand...
Click to collapse
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
flimmyflam said:
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
Click to expand...
Click to collapse
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
jdommer said:
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Click to expand...
Click to collapse
stanelie said:
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
Click to expand...
Click to collapse
Mine started vibrating again. I went to take the battery out, but couldn't get the screws off, so I gave up, when I rebooted, all the sudden vibrate worked again. Not sure if it was powering it on and off a few times, or shaking it around, try taking the battery out and putting it back in if you can, if not, just try turning it off and then on and maybe lightly shaking it around
Well,
It looks like a bad electrical contact, I've downloaded an app called "vibrater" that does just what it says, and it won't start the vibrator until I lightly tap the watch on it's side while the app is turning the vibrator on.
But it does not stick. I guess I will have to return the watch to have it fixed...
Until tonight, I thought the TrueSmart just didn't have a vibrator...
Vibration doesnt work
Hey, just received my Omate Trusmart! (Kickstarter edition)
Overall I am extremely happy with the watch, but there are a couple of major problems:
1. The vibration doesn't work, I have tried rebooting, factory restore etc but nothing seems to work. Does anyone know a fix to this or is it a hardware problem?
2. My screen has very faint dark spots in the center. Looks like a manufacturing defect.
Is it possible to return the watch to get a replacement? I havent opened the back cover yet.
Thanks.

Can't answer phone calls!

Wondering if this happens to anyone else. Sometimes when there is an incoming phone call the screen remains turned off and there is no way to see who's calling or to answer the call. The power button does nothing. Basically, all you can do is wait for the call to go to voice mail, then wait another 30-40 seconds after which the phone finally responds to the power button and turns on. This drives me crazy. What good is the damn phone if you can't answer important phone calls? Interestingly, this was my biggest complain about the stupid iPhone 6, where a lot of times I would be getting a call and the screen would be frozen. Are the phones only for web browsing and facebooking now? Making and receiving phone calls is a secondary feature and no one complains if it doesn't work?
Second issue. Every phone I've had going back many years has had a proximity sensor, where during a call the screen goes dark once you hold the phone to your ear and wakes up once you move it. The V10 does NOT do that. The screen never wakes up by itself, I always have to hit the power button. Is this a "feature" or a bug?

Hold to ear not working

I am finding that when I hold my phone to the air when it's on speaker, it does not cut off of speaker to ear. This used to work that has stopped.
I can't say if the other hold the ear functions are working, as I have early tried them.
Anyone else finding this to be an issue, or have a suggestion for fix?
to eat?!
kermex said:
to eat?!
Click to expand...
Click to collapse
I always need to re-read my posts, and fail to do so.
Of course, it shoud be ear, not eat.
I'll try to change the title, if it'll let me.
It's still not working, by the way...
This may be something you've tried, but have you made sure the function somehow hasn't been turned off?
Under 'Settings' - 'Smart Assistance' - 'Motion Control' there's the menu 'Raise to Ear'. Make sure that 'Smart Speaker' is turned on
Hope this resolves your issue.
vPro97 said:
This may be something you've tried, but have you made sure the function somehow hasn't been turned off?
Under 'Settings' - 'Smart Assistance' - 'Motion Control' there's the menu 'Raise to Ear'. Make sure that 'Smart Speaker' is turned on
Hope this resolves your issue.
Click to expand...
Click to collapse
I appreciate the suggestion. Did check that first thign, and just again.
There is a new wrinkle...since posting, I have hooked up my smart watch. Now on the phone screen, I can't just click the speaker on/off. It brings up a list, with 3 things on the list, Speaker, Ear, and Watch.
Seems to me maybe it may have to do with the proximity sensor.
By the way, Make Calls by holding to the ear does not work either.

Categories

Resources