Related
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
cannot unlock?
I'm try to upgrade to Sotfbank new ROM and sucessfully. But it is sim locked.
Is it can sim unlock?
please help
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Sorry, but this is already old news. This rom is recommended for installation by Softbank. The bootloader seems to be modified 1.09. SuperCID before installing this rom.
http://forum.xda-developers.com/showthread.php?t=284699&highlight=softbank
shchan68 said:
I'm try to upgrade to Sotfbank new ROM and sucessfully. But it is sim locked.
Is it can sim unlock?
please help
Click to expand...
Click to collapse
Did you SUPERCID the rom? This rom was discussed in the forum and it was recommended to unlock to SUPERCID the phone first.
Anyone try this yet? And advantages in flashing my 8525 with this?
MilanoRex said:
Anyone try this yet? And advantages in flashing my 8525 with this?
Click to expand...
Click to collapse
Dont flash it with this rom. You will be stuck with SPL 1.09.
This rom is recommended by softbank for installation because of some changes made in their network after APRIL 1st 2007.
So right now people here are looking into this matter...i will most likely install
it in a matter of weeks.
aquasesh said:
Dont flash it with this rom. You will be stuck with SPL 1.09.
This rom is recommended by softbank for installation because of some changes made in their network after APRIL 1st 2007.
So right now people here are looking into this matter...i will most likely install
it in a matter of weeks.
Click to expand...
Click to collapse
don't jump the gun. we still have more than 3 months before apr 1. someone may be able to crack the password for the new ap before that. let's keep our fingers and toes crossed...
downgrade bootloader need help
i have x10HT
my bootloader is 1.06
i already download the downgrade bootloader
but my active sync don't work
is there still have a new way to downgrade bootloader without activesync?
thanks
dannniel said:
i have x10HT
my bootloader is 1.06
i already download the downgrade bootloader
but my active sync don't work
is there still have a new way to downgrade bootloader without activesync?
thanks
Click to expand...
Click to collapse
Maybe you should try to fix your AS... whats wrong with it...?
@harry
Youre right, i should wait...im not so keen on reinstall anyway
x01ht 1.06 bootloader
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Dear Julian
I would like to flash my x01ht back to 1.06 bootloader. (now with DoCo ROM)
Do you know where I can find it out?
If so, would you please tell me.
Thank you and Happy new year!
W.E.
Stupid question
Just a question about this ROM and superCID.
I have unlocked and superCIDed my device.
Does that mean the device stays superCIDed, and I can install this ROM, and if I don't like it, revert to another? (in my case the French Qtek one).
What advantages does this ROM hold over the DoCoMo one?
Thanks in advance.
Yannick
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Is this ROM the latets available for Softbank phones ?
I need to flash my phone back to its original ROM... So I'd like to be sure I am not doing a mistake with this one...
Alcibiade said:
Is this ROM the latets available for Softbank phones ?
I need to flash my phone back to its original ROM... So I'd like to be sure I am not doing a mistake with this one...
Click to expand...
Click to collapse
Seems like the right one, with the right radio version. Anyway, why are you flashing it back to original? Selling your phone? Sending in to repair? *curious*
auyongtc said:
Seems like the right one, with the right radio version. Anyway, why are you flashing it back to original? Selling your phone? Sending in to repair? *curious*
Click to expand...
Click to collapse
Some problems with it (Half bricked)
Not even sure Ill be able to fash it back but if I do I ll try to get it fixed...
http://forum.xda-developers.com/showthread.php?t=302629
I've tried many times flashing this rom but when I get to the bootloader screen which shows:
HERM200
IPL-1.03
HERM200
SPL-1.40.Olipro
The ROM program in PC stop for a long time and then shows the error msg:
Cannot connect to your PDA Phone, check your USB connection... Then when I soft reset the phone, the previous ROM still works.
But the USB connection is OK and I've flashed many other roms successfully.
Could anyone help me because I badly need to flash the original X01HT ROM.
P/S: My phone is CID, not Super CID. I use the SSPL to have the ability of flashing rom into it.
Extract the NBH from this rom and use CustomRUU, force SSPL if you want to overwrite the bootloader too, otherwise flash it directly with HardSPL.
Thank you for your advice. I have flashed many roms into my X01HT and now just want to make it original so that I can claim warranty at Softbank. Do you think it's OK?
By the way I don't know how to extract the NBH file from this ROM. The ROM is only a EXE file. Could you please tell me more detail.
Thank you
@LongmanVN: use winrar to extract the contents from the exe.
Thank you, it works now!
extract the NBH?
And then??? If I duoble click NBH my pc does not recognize it as a program.
I unzipped everything in a folder and now???
What is the next step?
Someone can help?
As per http://forum.xda-developers.com/showthread.php?t=293721.
(Read all the relevant links - KNOW what you are going to do before you do it!)
Since we are on the way to doing NBH radio upgrades, I've just uploaded Trinity1.33.00.11-108toHermesType2.zip to the Hermes upload area.
Be aware: this radio features radio bootloader 1.08 with all the caveats that implies. If you're not sure about using it, don't!
Does the Trinity-Radio work on Hermes?
1.33.00.11 means GPS enabled?
Pyranwolf said:
As per http://forum.xda-developers.com/showthread.php?t=293721.
(Read all the relevant links - KNOW what you are going to do before you do it!)
Since we are on the way to doing NBH radio upgrades, I've just uploaded Trinity1.33.00.11-108toHermesType2.zip to the Hermes upload area.
Be aware: this radio features radio bootloader 1.08 with all the caveats that implies. If you're not sure about using it, don't!
Click to expand...
Click to collapse
i have uploaded that the day it was released... somebody already flashed it but there was no obvious change in the gps behaviour
it doesnt matter if we have radio bootloader 108 anymore thanks to the new tool from DES... does this radio support GPS though??
Why not just use the 1.33.31.00 Radio from Cingular or the 1.34 from the WWE test ROM for Hermes? Until the GPS works on the Hermes might as well stay on a true Hermes Radio.
dutty said:
i have uploaded that the day it was released... somebody already flashed it but there was no obvious change in the gps behaviour
Click to expand...
Click to collapse
that was me, i compiled the 1.33.00.11 too, and flashed it to my hermes.
but dutty, you compiled the 1.31.00.11
PAPPL said:
Does the Trinity-Radio work on Hermes?
1.33.00.11 means GPS enabled?
Click to expand...
Click to collapse
Trinity Radios do work on the hermes, and yes it is gps enabled. However the OS side of things has yet to be fully implemented.
wpbear said:
Why not just use the 1.33.31.00 Radio from Cingular or the 1.34 from the WWE test ROM for Hermes? Until the GPS works on the Hermes might as well stay on a true Hermes Radio.
Click to expand...
Click to collapse
It's mainly to aid the GPS efforts. We might as well use the most recent GPS radio we can now that 1.08 won't be an issue (I've yet to see how to create the NBH out of the NB mind - I think pof was going to be letting us know. Saw the imagehash tool but wasn't that for an existing unsigned NBH->signed NBH?)
edit: plus we do it just because we can!
Pyranwolf said:
edit: plus we do it just because we can!
Click to expand...
Click to collapse
I like this answer the best
apokryphus said:
that was me, i compiled the 1.33.00.11 too, and flashed it to my hermes.
but dutty, you compiled the 1.31.00.11
Click to expand...
Click to collapse
oopsi..
guys,
im having issues flashing this radio rom onto my device... gets to the end and gives the normal error... but when i go and look at the version in Device Information it gives me the previous radio version...
yepp, because of radiobootloader 0108... you won´t able to flash a radiorom only upgrade..
btw: i uploaded the RadioRom for Hermes with the new DOPOD 1.35.00.11 to the upload folder...
apokryphus said:
yepp, because of radiobootloader 0108... you won´t able to flash a radiorom only upgrade..
btw: i uploaded the RadioRom for Hermes with the new DOPOD 1.35.00.11 to the upload folder...
Click to expand...
Click to collapse
If we are trying to flash a 01018 to another 01018 (example going from 1.33 to 1.34 Radio ROM) will the MaUpgradeUt_noID system work??
How can i install this ? I use RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test.exe with SPL-1.04
belu said:
How can i install this ? I use RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test.exe with SPL-1.04
Click to expand...
Click to collapse
You don't atm. This is an NBF upgrade meant for SPL1.04 bootloaders & Radio Bootloader 1.07 only.
When the upgrade is installed, radio bootloader 1.08 will be present, but NBH radio upgrades are not far away now.
apokryphus said:
yepp, because of radiobootloader 0108... you won´t able to flash a radiorom only upgrade..
btw: i uploaded the RadioRom for Hermes with the new DOPOD 1.35.00.11 to the upload folder...
Click to expand...
Click to collapse
where did u extract this radio from??
walshieau said:
where did u extract this radio from??
Click to expand...
Click to collapse
trinity dopod rom - sorry but there is now new rom for the hermes yet!
Ok this is an e-mail I got and I answered it, but I thought..lets post it for people that are interesed in upgrading there phone, but dont know what or how to do.
*Yes I know Wiki exist!
mccreath said:
Hi Mate,
Hope you don't mind the PM, but I just got my MDA Vario II replaced under warranty and have to start all over again with the customization.
I saw you had the same device and a great setup, and wondered if you could tell me the quickest/ best way to get WM6 and the ROM/Radio on mine please?
Any help would be great, thanks,
Andy
Click to expand...
Click to collapse
Hi!..
If you dont know some things, read WIKI, it helps (most of the time to get an answer)
First you upgrade your SPL
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. This way you prevent to brick your PDA again.
Click to expand...
Click to collapse
I dont got my warranty anymore because I made my phone simlock-free. *if you do this, READ that topic carefully!! *I just did it because I thought it was fun to mess arround with my phone..*and to tell you the truth..it was!
After that, you do this:
Ok..this is what I did, I installed this version of WM6 (for you notice; doing this is on your own risk.)
Then I upgraded my Radio to 1.41.00.10 (if you wanna know what that is, go Wiki)
Here you can find some great programs.
owyeah..here you can find the latest version of windows Live Messenger!
Hope you will learn something of all of this
cheers!
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
Click to expand...
Click to collapse
True Thq..I'd forget to note that
Alright folks, Touch Diamond 2 SIM Unlocker (also for AT&T Pure) sorted:
1) contributing forum members & Elite Team donators... Request a free unlock with your IMEI & email. - if you have an account that has a) existed for a good few months and b) you actually contribute to the site (technical wizardy, or general helpfulness - CONSISTENT AND REGULAR POSTING), then just drop me a message and it's yours, if you don't meet both a) and b) then don't bother - having an account that you rarely posted from is NOT in the least bit interesting.
2) everyone else (new accounts/unregistered/sod all posts, this means you): [size=+2]Get SIM unlocked Here[/size]
for those who don't know:
Security Unlock lets you flash radios from other devices... technically speaking you can flash any radio, the Diamond, Raphael, Blackstone and Kovsky radios are NOT compatible, they will kill your device and cause biblical plagues - Rhodium will work fine though.
CID unlock is largely redundant, however, it's quite useful if you like to keep your device on a stock SPL as it means you can flash any official ROM regardless of which brand it's intended for without changing SPL.
Olipro said:
it's quite useful if you like to keep your device on a stock SPL as it means you can flash any official ROM regardless of which brand it's intended for without changing SPL.
Click to expand...
Click to collapse
Hi,
Does this mean that if I unlocked using the CID unlocker tool, I would be able to flash from a T-Mobile ROM to the stock HTC one?
I am having problems validating hardspl due to internet connection problems so this may be an alternate solution.
Sorry if this is a silly question.
maxcherry said:
Hi,
Does this mean that if I unlocked using the CID unlocker tool, I would be able to flash from a T-Mobile ROM to the stock HTC one?
I am having problems validating hardspl due to internet connection problems so this may be an alternate solution.
Sorry if this is a silly question.
Click to expand...
Click to collapse
Please be advised that the Unlocker also uses a validator.
Regards,
EqX
Curses.
Thanks for the info
the unlocker comes with Hard-SPL bundled into it, but it'll only Hard-SPL a device that's paid for.
Topaz/Diamond 2 CID/Security/SIM Unlocker
that's great news
maxcherry said:
Curses.
Thanks for the info
Click to expand...
Click to collapse
don't worry, just PM me & I'll help with the HardSPL.
Hi
Thank U. I bought it, and I will try it today. After this program can I change the radio rom for free, The SIM unlock is still?
Breki said:
Hi
Thank U. I bought it, and I will try it today. After this program can I change the radio rom for free, The SIM unlock is still?
Click to expand...
Click to collapse
Correct, the unlock will remain. The Radio this program flashes is a temporary one for unlocking purposes only, so you change radio at the end of it .
Dave
DELETE
Wrong post multitab problem
Question Mr Oli or cmonex:
If Rhodium device is similar, why HARDSPL and other stuff cant be totally applied to Rhodium device?? I mean, some memory issue or smth??
If is a stupid question, just dont answer... Is just I dont know
tramuyo said:
Question Mr Oli or cmonex:
If Rhodium device is similar, why HARDSPL and other stuff cant be totally applied to Rhodium device?? I mean, some memory issue or smth??
If is a stupid question, just dont answer... Is just I dont know
Click to expand...
Click to collapse
They're different. This is low level stuff we're hacking here... . Using the wrong SPL with either: 1. not work, or 2. brick the device (go find the guy who put a TP 1 CDMA SPL on his GSM TP2).
Dave
Oh.. Ok. Right answer!
btw. Flashing CDMA SPL in GSM thing surely will brick, what a stupid action!
If i unlock MDA Compact V with *unlock service - its once and FOREVER or maybe its gone after HARDspl, flashing ?
nikor4 said:
If i unlock MDA Compact V with *unlock service - its once and FOREVER or maybe its gone after HARDspl, flashing ?
Click to expand...
Click to collapse
It's forever, changing the SPL, ROM or radio will not remove it.
Dave
Never mind -- found my answer.....
DaveShaw said:
It's forever, changing the SPL, ROM or radio will not remove it.
Dave
Click to expand...
Click to collapse
with the exception of Security lock, that can be reversed, but the SIM lock has no effect on warranty
Olipro said:
with the exception of Security lock, that can be reversed, but the SIM lock has no effect on warranty
Click to expand...
Click to collapse
just to be 100% precise, we all know that of course sim lock can be put back too, but it is really pointless
What i need for use your soft to unlock
medianet18 said:
What i need for use your soft to unlock
Click to expand...
Click to collapse
a PC running XP or Vista, a device and a cable to connect it.
hello guys,
i like to install android OS in my hd2 but must have spl =<2.10 to use HSPL3_PKG.exe
my spl is 3.03 how to downgrade it please
thanks
fypoi said:
hello guys,
i like to install android OS in my hd2 but must have spl =<2.10 to use HSPL3_PKG.exe
my spl is 3.03 how to downgrade it please
thanks
Click to expand...
Click to collapse
Android is compatible with spl 3.03 sir
fypoi said:
hello guys,
i like to install android OS in my hd2 but must have spl =<2.10 to use HSPL3_PKG.exe
my spl is 3.03 how to downgrade it please
thanks
Click to expand...
Click to collapse
sir, the only thing you need is a radio >2.08 and you have it.!!!.so just copy the android folder from your favourite build on your sd cardand run it , thats all you do
@kurt-willems
@pakure
thanks for reply and notifications,
now i copy android files in sd card and run haret only without any other operation?
first click on clrcad........nothing will happen (this step is necessary to enable sound in android)......then click on haret..........wait for 5 to 15 mins...first time booting takes time........enjoy
pakure said:
first click on clrcad........nothing will happen (this step is necessary to enable sound in android)......then click on haret..........wait for 5 to 15 mins...first time booting takes time........enjoy
Click to expand...
Click to collapse
thanks pakure, i will job today and post result
i was pretty sure, that the first releases required a .50 radio AND hspl...
am i wrong?
DN41
DN41 said:
i was pretty sure, that the first releases required a .50 radio AND hspl...
am i wrong?
DN41
Click to expand...
Click to collapse
Android needs only to have a radio version higher than v. 2.08.50 sir
i think thats one of those rare situations, that i'm happy i was wrong
DN41
DN41 said:
i think thats one of those rare situations, that i'm happy i was wrong
DN41
Click to expand...
Click to collapse
Knowledge is build from mistakes of the past
Just a quick question:
Is there any reason why m-deejay`s stuff wont`t work on my HD2? I have upgraded to the latest update that HTC has provided, but i can`t seem to boot any of his builds. JDMS, on the other hand, is working fine.
Anyone have an idea?
Svendheim said:
Just a quick question:
Is there any reason why m-deejay`s stuff wont`t work on my HD2? I have upgraded to the latest update that HTC has provided, but i can`t seem to boot any of his builds. JDMS, on the other hand, is working fine.
Anyone have an idea?
Click to expand...
Click to collapse
It's strange. I have test Latest Stock ROM 3.14 (without HSPL) and tested at the same way a Android build from m-deejay (Desire HD build) without problems.
The only thing I can imagine is that you didn't remove HSPL; this cause limitation of available program memory!
No, that is sadly not the case. HSPL has never been installed on my phone Guess I will try a couple more times.
spl 3.03
easy install android but when restart WM launched, i miss anything?
steps:
CLRCRD
HARET
configuration
that s all
thanks pakure and willems
fypoi said:
spl 3.03
easy install android but when restart WM launched, i miss anything?
steps:
CLRCRD
HARET
configuration
that s all
thanks pakure and willems
Click to expand...
Click to collapse
install EBL loader or jmd dual boot cab in winmo.........you will get a bootscreen at power on, to select between winmo or android
i have bricked hd2 with spl 3.03.do i need to downgrade or is there still a way to revive this phone as gold card is not working
deepakgarg said:
i have bricked hd2 with spl 3.03.do i need to downgrade or is there still a way to revive this phone as gold card is not working
Click to expand...
Click to collapse
bricked??/ how do you say that?..can you see the tricolour bootscreen?...if you can, you are saved
many thanks pakure for instructons
Jumping back to topic:
I just got my HD2 a couple a days ago installed the latest HTC update. Does anybody have instructions on how to downgrade SPL to, say, 2.08?
Would be fun to try some custom roms.
Svendheim said:
Jumping back to topic:
I just got my HD2 a couple a days ago installed the latest HTC update. Does anybody have instructions on how to downgrade SPL to, say, 2.08?
Would be fun to try some custom roms.
Click to expand...
Click to collapse
With the latest stock rom (3.14) you can't change your spl version!