OMG!!! T-Mobile have released Official WM6 ROMS UK NE DE AT!!!
Thread
There are a lot of people who keep asking for T-Mobile ROMs I was one of them. So this morning after someone else asking I have decided to post this in the hope it can be referred to!
CURRENTLY AVAILABLE DUMPED T-Mobile ROMs
UK ROM
UK ROM - With CustomRUU v4.3 felt kind so updated it for you all!
UK ROM - Windows Mobile 6 Test 3.60 - Radio 1.50
DUTCH ROM
CROATIAN ROM
GERMAN ROM
Edit from Sleuth255: We are not allowed to host ROMs here. Please post to rapidshare or some other site then link. I must remove these ROMs from our FTP due to an edict from m$ legal. Sorry
The UK one appears to have been built however I have not tested it, if someone has used it in the past please let me know.
I have not checked any of the others, if people have used them and they are built please contact me and I shall update this accordingly.
Please can someone update the Wiki for the UK ROM, thanks.
CURRENTLY AVAILABLE SHIPPED T-Mobile ROMs
HUNGARIAN
GERMAN
SHIPPED ROMS HERE
If there are anymore T-Mobile Shipped ROMS I have not mentioned please msg me and I will update accordingly.
Any chance of this thread being sticked?
Thanks, I think this is very helpfull.
Great! Always usefull when you need to restore your device
Has anyone tested if any of these ROMs flash properly.. for me it would be the Dutchversion then... But I can not test right now can not have my phone broken down. Once Kaizer is out I am going to buy that one and then I could test, but would be nice to know if these dumped ROMs work
Unfortunately I do not know, I haven't even tested the UK version as I am not sure if it will work, however I did update the RUU.
Shame we cannot emulate the firmware install!
The T-Mob UK dumped ROM isn't quite right - the w'n'w home page doesn't work properly.
Minor thing but, one of the first things I tested
I dumped my friends ROM the other day. I'm currently working on building it and testing it - will let you know when it's done
Cheers,
Smiffy.
Hmmm...humble pie - lovely
Well, after flashing the ROM i dumped the other day, I had exactly the same thing with IE.
It took me about 3 seconds to realise it must be because the extROM had been flashed by one of the WM6 ROMs I had been using in the past.
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Smiffy.
Lordsmiff said:
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Click to expand...
Click to collapse
How can I do that?
trapper said:
How can I do that?
Click to expand...
Click to collapse
Trapper,
I assume you mean how can you put the correct Extended ROM onto your device? If I understand this correctly, the ROMs mentioned in Jygar's first post are the original main ROM but the Extended ROM is in fact from a Windows Mobile 6 ROM (I do not believe that flashing a ROM will affect the Extended ROM - the problem is that the re-flashed (downgraded) WM5 ROM is starting the Extended ROM installation after the basic OS install (as normal) but that Extended ROM is still a WM6 one.
The page that is linked to includes many Extended ROMs from many countries and devices - one of them an original T-Mobile ROM (here) and if you were to unlock/unhide and mount your Extended ROM you would be able to delete the incorrect (WM6) ones and then paste in these original Extended ROM files.
The Extended ROM files are executed during a hard reset after the OS has been installed - details of how this works are within this forum. I am not sure that you need to do a hard reset but it all depends on whether you stopped the device completing a normal (complete) install. After a hard reset the device will start to execute the Extended ROM files/.cabs and if you stop that with a soft reset as soon as it starts then the device will re-boot with a basic WM build (with no service provider fixes/updates/customisations/settings)
If this is all explaining what you already know then sorry but your question posted is rather open... Hope this helps
ExtROM.nb attached Just put it into an NBH and flash
@tony.wheeler - What was the original radio version of your Vario II? I'm in the process of creating a complete upgrade to restore UK MDA Vario II's to their 'out of the box' state with the original ROMs (IPL, SPL, MainSplash, SubSplash, OS, Radio ExtROM)
Phil
eek, think it was 1.03?
[edit]Have done a search it appears it is 1.05!
only problem is this is HTC_BOOT 0106 and most ppl are now patched to 0108 so I would have thought we cannot downgrade our radio rom.
TBH 1.43 is the best radio rom out and i cannot say a bad word against it. I have only eva updated my radio rom and since the radio update have not had a problem with the origional t-mob os.
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
The dutch rom seems to be in *.raw files. How can i open of re compile it?
jm012a9749 can you upload it?
RaDeNRFX said:
The dutch rom seems to be in *.raw files. How can i open of re compile it?
Click to expand...
Click to collapse
Same question here.
Does anyone know how to use the .raw files...?
as its all t-mobile users on this thread, what radios are people finding the best? UK
Read, read, read...
wensing said:
Same question here.
Does anyone know how to use the .raw files...?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
fil said:
as its all t-mobile users on this thread, what radios are people finding the best? UK
Click to expand...
Click to collapse
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
jm012a9749 said:
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
Click to expand...
Click to collapse
Any chance of you posting this backup ROM? There are many of us who would be very keen to have this as a safety net for when we have to return our Vario 2s under warranty.
twelve47 said:
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
Click to expand...
Click to collapse
I too am running with Radio 1.50, after a short-lived update to WM6. I have had no problems at all with 2g or 3g, steady as a rock.
Related
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Hi killercheung...
where are you find the 1.60 rom ?
and the radio what version is ?
Can you put it in my ftp pls ?
it's always on
ftp://dgmatic.com
user: xda
pass: xda
port: 21
...like this we can have it all
Thanks in advance
Denis
I asked here for you, hopefully it will be available for everyone soon:
http://www.ppcsg.com/forums/viewtopic.php?p=173744#173744
-arebelspy
killercheung, thanks for that... I'm still deciding whether to apply the new rom to my UK XDA II.... is the language of the rom netherlands? or can I have it all in english as it is with the normal O2 rom?
Do we lose anything from the o2 rom/extended rom ?
I'm wondering if O2 do bring an upgrade out if we'll be able to still use it if we've tried this t-mobile 1.60 rom.... hmmmmm
hmmm decisions decisions... do you think its much better than the current o2 rom?
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
satria said:
Wiz said:
Now that I have moved to the 1.60 rom, I must say there's ONE thing I DO miss ....
My O2 BUBBLES ARE GONE FROM MY ASIAN O2.
(I obviously knew this could happen, but thought I'd made a backup of my extended ROM (I DID, but I accidentally tossed it a few days ago) . Who would be so kind as to send me a copy of the O2.cab file from the extended rom, so that I can put the bubbles back into my dialer ...)
Click to expand...
Click to collapse
No need to be sad. Check ur e-mail. Inform me if it doesn't arrive.
Click to expand...
Click to collapse
mind sending me a copy too ?
thanks in advance
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
killercheung said:
I tried the T-Mobile 1.60 rom on my O2 xda2.
It works perfectly with my xda2.
However, I found some interest thing on the new rom upgrade process
1. It seems XDA2 (or HTC Himalaya) use one single program for RAIDO / Extended Rom / OS Rom update. It seems Radio upgrade failure may no longer case device failure, because the RADIO upgrade process is same as OS upgrade process, and not required to copy the whole software into the RAM to upgrade.
2. Sinces some of us (and my XDA2) report that the exteneded rom is READ ONLY, but the upgrade program can update the extended rom. That means the Exteneded rom is not REALLY read only, but somewhere locked it. More funny is , it is seems the Main OS rom is not controlling the exteneded rom is locked or not, because after I updated the extended rom, it is still locked.
3. If O2 XDA2 can use T-Mobile MDA2 update, it seems the upgrade software no longer check the header of the device (At lease this version won't). I think we can use it to change device's language. However I don't know how to dump the rom in .nbf format, is that possible to convert the nb1 format to nbf format?
Thanks.
Click to expand...
Click to collapse
Good news about the T-Mobile ROM. I don't know what they have fixed/patched, but my O2 XDA II ROM never bothered to disconnect the GPRS connection after having spent some time online, not after surfing, not after checking e-mail. Mind you the T-moblile ROM doesn't either, except ....... when checking e-mail, which in my eyes is quite important.
So now I can go back to have my XDA check my e-mail once per hour, knowing that it will disconnect automatically.
(And Satria, thanks for sending me my bubbles
@ ming:
check ur email. Also I've seen ur review at PPCSG forum. Great.
Regards,
satria
Hi,
Just one question. Did any of you that make the update testet with the bluetooth GPS?
If yes, It works? or you still have to install TOWA´s patch?
Regards
JoseF
Re: Some interesting things on the T-Mboile 1.60 update soft
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Hi guys,
I did the update to rom 1.60 and it is great. I have an Imate Pocet PC. the new rom is excellent but with one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well :twisted: :twisted: :twisted: :twisted: :twisted: i there a fix to this.
Thanks,
Gilbert
[email protected]
Re: Some interesting things on the T-Mboile 1.60 update soft
killercheung said:
somesex said:
Hi Killercheung,
You've missed out something ... the EXE file can be unzipped (using Winrar) ... you will then see the same upgrade.exe files, nbf files (3 of them) ... you can then deleted the ms_.nbf so that only the CORE ROM and RADIO is updated, and keep all O2 EXTENDED_ROM content untouch.
You can also use the same method to upgrade to Chinese ...
somesex
Click to expand...
Click to collapse
I know that, and I did unzip them beforce upgrade.
The problem is I don't know how to get a CHINESE ROM in NBF format...
Click to expand...
Click to collapse
For NBF, you can use XDAtools to capture the Chinese ROM, I did once with the English ROM and the file size is exactly the same as the one in 1.60 update. So there should have no missing bytes in the saved file.
For the EXTENDED_ROM, no idea how to save in NBF format ..
I have installed the update but TomTom doesnt see the serial ports 4/5.
@axbl
Hi, What do you think about the update? It´s mutch better than before?
You say "TomTom doesnt see the serial ports 4/5."
Have you installd Towa solution?
Regards
JoseF
Gilbert said:
one sad thing and that is if the device goes in standby mode the GPRS connection if you are connected to the internet goes off as well
Click to expand...
Click to collapse
yikes...... did that happen on the old rom as well or did gprs stay connected on the original rom?
I hate the way gprs disconnects on devices.. it's supposed to be always on, and I'd really prefer if it stayed on during suspend etc so that MSN could stay connected, notifying me when I got a message....
Email checking likewise, I'd prefer gprs remained always connected and it'd check email in the background whether off or on, notifying me when it got a new mail.
I can't check the behaviour of my xda II since Im on "roaming" at the moment in another country so no gprs
but can anyone say for sure which way the old vs new rom work in this regard?
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
XDA developer Itsme said:
I did some research on the upgrade process, and fileformats:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
Click to expand...
Click to collapse
I get an error 403 forbidden when I try this link.. odd thing is it was working for me earlier..
-arebelspy
oeps. fixed now.
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
I have the Orange SPV M3100 and was wondering when (and if) they release a ROM upgrade, where will it be posted?
O2, TMobile and Voda all have download pages for various things, but Ornage don't seem to do this.
Now come on. Please put a ? on the end of your subject! I nearly wet myself when I saw your post, thinking that they'd pulled their fingers out and posted a new ROM :wink:
When they do post it, it will be at
http://www.business.orange.co.uk/se...4132772045&extarg1=Phone&t=SMEDeviceDownloads
LOL Sorry never thought of that :lol:
That's FUNNY!
I followed the link above to the Orange page about the M3100. It says that standby time is 6 days! ROFL!
I get about 1 day out of mine - and I hardly make any calls!
Being a little inaccurate - ok. Getting 18% of "official" figure - that's just plain old BS...
Have heard Orange won't be releasing an update until January so don't get your hopes up for one soon.
petes said:
Now come on. Please put a ? on the end of your subject! I nearly wet myself when I saw your post, thinking that they'd pulled their fingers out and posted a new ROM :wink:
When they do post it, it will be at
http://www.business.orange.co.uk/se...4132772045&extarg1=Phone&t=SMEDeviceDownloads
Click to expand...
Click to collapse
The link you provide doesn't have their first and only ROM. Does anyone have it. I need it very badly since I want to play with upgrading and using hard spl. I'm afraid if I brick it again while upgrading I'll have a chance to flash the original ROM.
Does anyone know when they will have an upgrade? Will they ever???????
Sniper258 said:
The link you provide doesn't have their first and only ROM. Does anyone have it. I need it very badly since I want to play with upgrading and using hard spl. I'm afraid if I brick it again while upgrading I'll have a chance to flash the original ROM.
Does anyone know when they will have an upgrade? Will they ever???????
Click to expand...
Click to collapse
I was waiting for 6 months. Gave up in the end and just took the cover and screen off my bricked SPV and put it on a knackered Vario ii.
I'm not sure what Orange's thinking will be with updating this ROM - if they start selling SPVs with Windows Mobile 6 they may just not bother releasing an Updated ROM at all (unless the need arises to release a newer ROM for handsets pre-installed with WM6 - in which case I doubt the older WM5 handsets will be supported by such an upgrade due to licensing issues).
Much as I would've liked to find a ROM update I really don't think they'll bother: there are no real issues with the original ROM (at least I never came across any).
I Cooked A WM6 Orange Ron Using Bepes Kitchen. It Has All Of The Orange Settings Installed, But It's WM6. Use The UK Orange Package Posted In Bepes Thread.
Cheers
mousey_ said:
I Cooked A WM6 Orange Ron Using Bepes Kitchen. It Has All Of The Orange Settings Installed, But It's WM6. Use The UK Orange Package Posted In Bepes Thread.
Cheers
Click to expand...
Click to collapse
will that work?
Orange id needs to be 001 not 008 otherwise it'll say invalid vendor ID.
I've the same problem from November 2006 !!!!!! Please a rom with 001 cid !!!! Thanks from Italy
How does your cooked ROM perform? Does it have all the Orange settings for GPRS/MMS etc? Was thinking of cooking it as although I currently use WMXL, I would really like the Orange settings built in.
mousey_ said:
I Cooked A WM6 Orange Ron Using Bepes Kitchen. It Has All Of The Orange Settings Installed, But It's WM6. Use The UK Orange Package Posted In Bepes Thread.
Cheers
Click to expand...
Click to collapse
Bebes thread has a striped ROM(operator settings only I think). What I'm after is a complete shipped ROM for just in case I brick it again.
My intention is to keep the bootloader to 1.04 and use Hard-Spl. Then I'm able to upgrade to anything without worries.
Ok, Well The Cooked WM6 Rom Works Fine, @findus Yes All The Orange Settings Are Included, No Problems As Of Yet.
@sniper258 I Also Recompiled The Original Orange UK Rom From A Dump Someone Had Made, It Is The Original OS That Is Supplied With Your Orange SPV M3100. Search For Rom Reconstruction And You'll Find It.
Cheers
@sniper258 From The Sounds Of It You Still Have The Original Rom Installed, Could You Tell Me What Radio Rom It Ships With Originally So I Can Create A Proper Original Rom That Includes The Same IPL,SPL,OS And Radio.
IPL - 1.01
SPL - 1.04
OS - Orange UK 001
Radio - ??
Just A Quick Check You Are From The UK Yes?
Cheers
As stated the cooked rom as above does add all of the settings but the battery icon on the top bar does not work, after install it stays as the clock.
Changing the registry to show the via ms shell does not work either as the battery icon does appear but does not function.
@the.drone
Is This The WM6 ROM? I Didn't Know That Was The Case, I Use SPB File Explorer Which Uses A Today Plugin Whos Battery Meter Works. But I Can See How Annoying That Would Be.
Off Topic Where Is Lake Vyrnwy In Wales?
Cheers
this is on either the aku3.3 or wm6 roms, have been trying to find a fix for the past few weeks.
off topic = Powys - mid wales west of welshpool
mousey_ said:
@sniper258 From The Sounds Of It You Still Have The Original Rom Installed, Could You Tell Me What Radio Rom It Ships With Originally So I Can Create A Proper Original Rom That Includes The Same IPL,SPL,OS And Radio.
IPL - 1.01
SPL - 1.04
OS - Orange UK 001
Radio - ??
Just A Quick Check You Are From The UK Yes?
Cheers
Click to expand...
Click to collapse
Mine shipped with 1.06 radio
Would also be interested in a fall back position for Orange UK.....
reconstructed rom thread here http://forum.xda-developers.com/showthread.php?t=296412&highlight=rom+reconstruction
download link for reconstructed original orange uk rom here http://www.megaupload.com/?d=V2JTBWSZ
Ok 1 More Question Before I Compile This New Rom With The Same Radio And SPL. What Rom Version Was The Original Orange Rom?
Cheers
Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Hi Shaun,
I suggest you have a read through the threads and the Wiki, you'll find most of your answers are in there. XDA Live does not contain a Radio ROM so will not affect that side of things. Personally I recommend putting in your provider settings manually, as that way you know nothing will stuff up due to any funny files in the CAB!
I suggest you try the new radio ROMs again when you're running WM6, perhaps you've got issues with the icons displaying incorrectly depending on your radio version. Personally I'm using 1.35 without issue, and its been better than anything else, but then again I'm not with a provider who prides itself on making its own stupid frequency decisions just to be awkward
Cheers
Kevin
Shaun33 said:
Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Click to expand...
Click to collapse
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
xda-live does not flash the extended ROM... so you can use HTweakC to unlock it and use the cabs.....
I use Blackberry so my device is connected via UMTS on Telstra all the time. I had upgraded to 1.35 radio because of the reports of it's increased reception.
Well the battery drained in about 5 hours so I am reverting back to the original rom which gave me 24-36 hours battery life with UMTS active.
walshieau said:
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
Click to expand...
Click to collapse
Thanks for the response guys. Ive read the wiki and have taken it in, just wanted to check.
I have now reverted back to the orignal radio rom that was shipped with the unit which is 1.20.31.10. Its a pain i am with telstra but there is nothing you can do when the company has 30od services with them.
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Err... the Trinity radio version in the Wiki (which I hope you're getting from the Hermes Radio Rom wiki page and not the Trinity page!) is bundled with SSPL which means you don't have to worry about CID.
Shaun33 said:
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Click to expand...
Click to collapse
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
walshieau said:
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
Click to expand...
Click to collapse
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
KevinBaker said:
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
Click to expand...
Click to collapse
i sent him the update... and i forgot the sspl-herm.exe file....
walshieau said:
i sent him the update... and i forgot the sspl-herm.exe file....
Click to expand...
Click to collapse
Ah, makes sense then .
Shaun, you can either download the modified RUU Updater, or just download the 1.35.00.11 Radio ROM with RUU/SSPL updater integrated.
Thanks guys i thought that that rom was not the trinity one. Then one that i got was from the ftp .
Now i got that one which does have the RUU/SSPL updater integrated.
Thanks guys.
Just flasshed with the 1.35 Rom and it seams that its got Less reception than before. Onlyt by a bar and this in my current location. I have set the abnd to auto and will see how it goes will update ina day or 2.
I've extracted the radio ROM from latest Trinity ROM and packaged here as a standalone NBH radio upgrade:
HERM_RADIO_1.38.00.11_Only_SSPL.rarThis radio has HTC_BOOT 0108 and GPS enabled.
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Both steps have to be done with phone connected to computer through USB cable and activesync enabled, Des SSPL will be pushed into your phone when the RUU starts.
Remember that when flashing a radio only you don't need to hard-reset your phone, so no data will be lost.
Enjoy!
Excellent! Have you given this radio a work-out yet??
still flashing 92%
Edit: Flashed and working fine (see attached image), but still haven't seen any noticeable difference
What news with this radio ? most stable, battery ingrasse ?
pof said:
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Enjoy!
Click to expand...
Click to collapse
Pof ,I understand 1.10.Oli will somehow protect us from bricking device by flashing a wrong radio.But since it is base on 1.04 ,so it will not support Radio BL 0108,so if I am now having 0108 here,and I flash this rodio 1.38,and I got a bad flash,I still can not repair my device.Is that right?
Radio-BL 0108 or something newer?
Hope the battery-duration will be better than in 1.35 Radio
@qvik123: If that happens you have two options to unbrick your device:
1) wait for a hard SPL based on 1.09 (which AFAIK Des will release soon), once you have it reflash the radio again.
2) You will still be able to flash an OS only because hardSPL will still keep the "fake" SuperCID on your device, so flash a OS image with KITL enabled and then use the KITL mehtod to unbrick your device with Platform Builder.
By any means, if **** happens do not overwrite 1.10.Oli with other bootloader.
Thanks Pof,you just answered the question which kept me thinking since Hard SPL released.Flashing this one,now by 30%.
flashed 1.01 oli, flashed 1.38.00.11 - no problem, BUT when I flashing/updating (or possibly bricking ) device, I like to know what exactly is a differences between versions, only one think I know about 1.38.00.11 is, that this version have GPS enabled. Thats all. Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary. perhaps we should created one special thread with differences between versions, to better orientation (sorry if I miss this one, but I think at this time doesnt exist)... guys - thx for your work anyway
Thanks Pof I am going to upgrade.
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
yes, the question is really simple. but there is one more think you can do... read all this thread, and also this one. all necessary information is in there. and if you dont want to have 700$ paperweight, I really recommend to read all information about flashing procedures in wiki - here before you start. in any case of question or problem, do not hesitate to write some posts, but if anybody ask similar question like you, without some reading, which, yes, need a some time, then If somebody want to find any relevant and usefull information, must read about 60 % pointless posts... it is nothing personal, just for your info. forums is about people, and people keep forums alive.
you did not provide us any information about you current version of OS/ROM, BL version, for me it was easy, just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
jasonmoe said:
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
Click to expand...
Click to collapse
sinmae said:
....just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
Click to expand...
Click to collapse
Yes definatly read the wiki etc... but also do as sinmae has done and load a HardSPL first, this is especially relevant when flashing radios.
@pof are you also running a HardSPL based bootloader??
...can somene put this ROM on Rapidshare or somewhere else, cause XDA FTP is not working
Regards,
Primoz
any feedbaack with wm6 roms
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
sinmae said:
Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary.
Click to expand...
Click to collapse
Unfortunately HTC keeps this information private, so there's no ChangeLog.
The radio was not dumped from a device, but extracted from 1.23.408.1 Italian Trinity ROM.
mrvanx said:
@pof are you also running a HardSPL based bootloader??
Click to expand...
Click to collapse
Yes, I'm running 1.10.Oli right now.
Pc78 said:
XDA FTP is not working
Click to expand...
Click to collapse
It's fixed now, try to download again. The server has been down during last hours, but it should be all fixed now.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35.
Click to expand...
Click to collapse
Yes, I tried only with WM6. We don't know the difference / advantage, just that it's a newer (higher) radio version.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
Click to expand...
Click to collapse
The download server was down now running!!!!!
Just upgraded to radio 1.38 from 1.35 and I am running xdalive first release WM6 on O2 3g. Since the upgrade I am pretty sure the phone signal is now stronger as I have tested it in areas around my home and outside that got no signal, especially near my pc. I can now make a call next to my pc with 3 bars on the signal meter! The signal does not drop so much, I will test further and report back any problems, but so far so good.
Please let me know how you get on.
Can somebody compare the battery duration between this Radio and 1.34?
PAPPL said:
Can somebody compare the battery duration between this Radio and 1.34?
Click to expand...
Click to collapse
I will let you know on that one as I had it fully charged for the radio upgrade. I will keep an eye on it and report back.
I was about to down grade my radio back to .1.27 or earlier beacause of my UTMS reception in Brisbane (AU) and also the battery life. So i will also let you all know how this goes.