I've been going through many posts and the wiki for the past 4 hours...
My friend bought an Imate JASJAM and hes travelling in five hours..I thought it would be nice of me to update to the latest WWE rom from imates website
I've done this many times before on various imates ive owned in the past, but this time during the upgrade process I get an error and the phone reboots into the bootloader screen
Naturally activesync doesnt recognize the device now...
When I run the update again I go through all the steps, the progress bar shows for a few seconds and I get a "vender id" error and "0% upgrade image completed" shows up on the jasjam...Rebooting gets me back to bootloader with
IPL 1.01
SPL 1.06
Its 5am here and im not getting any sleep until I fix this for him!! I've scoured the net, xda-devs wiki and forum, tried many things, to no avail!
Any help would be greatly appreciated!
Put the phone into bootloader mode THEN run the update... do this by holding the camera button down for a while then hit the power button.
Already tried that countless times same "vender id" error...
Madcap180 said:
Put the phone into bootloader mode THEN run the update... do this by holding the camera button down for a while then hit the power button.
Click to expand...
Click to collapse
To put the Hermes in bootloader, you have to press down both the POWER button and SIDE OK button together and use the stylus at the same time to press the RESET button at the bottom.
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Have you tried a hard RESET yet?
URPREY said:
To put the Hermes in bootloader, you have to press down both the POWER button and SIDE OK button together and use the stylus at the same time to press the RESET button at the bottom.
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Click to expand...
Click to collapse
Sorry didnt correct madcap myself..But thats exactly what I did originally to get to the bootloader menu..Side OK+power+reset...
Still same vender ID error during update...
Yup tried the hard reset too...Just got back to his bricked jasjam
It's not bricked.. hmn.. sheesh, I dont know too much about Hermes... does he have a SD card?
MicroSD...
hmn... is it in when you are trying to flash? if it is, take it out and try again... I dunno, trying to throw everything at ya .. lol
Even though you don't really deserve this, as you didn't bother to read the directions carefully the first time.. Here's the way to fix it:
See this: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem4
Once you get back into Windows, the first thing you need to install is HardSPLv7..
Let me know if it works.
LOL hadnt tried that actually...
Didn't work though
jayleb said:
LOL hadnt tried that actually...
Didn't work though
Click to expand...
Click to collapse
WHAT didn't work? I don't read minds...
Did it not boot into Windows? Where did it stop? etc.etc.etc..
I will not ask for clarification again.. I'll get too annoyed with it, and you'll be buying your friend a new phone.
Legolas, no need to be a ****.. The guy tried what you told him to try and it didn't work.. not everyone is as 'smart' as u. give the guy a break.
LegolasTheElf said:
Even though you don't really deserve this, as you didn't bother to read the directions carefully the first time.. Here's the way to fix it:
See this: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem4
Once you get back into Windows, the first thing you need to install is HardSPLv7..
Let me know if it works.
Click to expand...
Click to collapse
With all due respect, I DID read the directions and I DID try that. That was actually the first thing I tried! And when I followed the directions it got stuck on "Windows Mobile" screen...After which I followed the directions for that (problem 2) and yet again still stuck on windows mobile screen! After trying to update again I was back to bootloader-only mode..
Tried HardSPLv7 but it gave me a connection error multiple times...
LegolasTheElf said:
WHAT didn't work? I don't read minds...
Did it not boot into Windows? Where did it stop? etc.etc.etc..
I will not ask for clarification again.. I'll get too annoyed with it, and you'll be buying your friend a new phone.
Click to expand...
Click to collapse
The "didnt work" was meant for the SD-removal idea...
And dude, seriously...Chill
Madcap180 said:
Legolas, no need to be a ****.. The guy tried what you told him to try and it didn't work.. not everyone is as 'smart' as u. give the guy a break.
Click to expand...
Click to collapse
I am being kind and gentle. I am telling him what I am willing and not willing to do in nice terms. It's true: I really do get annoyed when people aren't being clear.
I am offering *my* Friday evening to help him fix *his* phone. I shouldn't need to be bothered by the lack of communication.
jayleb said:
The "didnt work" was meant for the SD-removal idea...
And dude, seriously...Chill
Click to expand...
Click to collapse
Ok, I'm done.. Have fun..
You'll want to read the WIKI and SEARCH using Google..
Sorry, I just don't want to get annoyed over this--especially since I'm trying to help you out.
jayleb said:
With all due respect, I DID read the directions and I DID try that. That was actually the first thing I tried! And when I followed the directions it got stuck on "Windows Mobile" screen...After which I followed the directions for that (problem 2) and yet again still stuck on windows mobile screen! After trying to update again I was back to bootloader-only mode..
Tried HardSPLv7 but it gave me a connection error multiple times...
Click to expand...
Click to collapse
Do you get a No GSM error?
LegolasTheElf said:
Do you get a No GSM error?
Click to expand...
Click to collapse
Nope......
Related
I have searched and searched these forums and have seen several other people with this problem but no solution. I have also looked through the wiki to no avail, so if someone can give me an answer I would really appreciate it.
I have been able to get into the bootloader screen (the r-g-b white stripes) however there is NO text (no serial, no usb) on the screen and it is not recognized by any pc. Can't get any response from mtty.exe because it can't see the USB port. Have tried on multiple PC's...
Is there another way to resurrect this athena or is it DOA?
Thanks,
-Alex-
Some pics of problem...
Blank bootloader...
Please help!
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
jas_pik said:
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
Click to expand...
Click to collapse
Yes...no joy.
Just stays on the tri-color screen with no indication that it is reading the card.
Thanks for the advice though!
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
ssutherland said:
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
Click to expand...
Click to collapse
Yes, tried the hard reset (camera + reset) the alternate reset (comm + camera + reset) and even the other reset (volume slider + camera + reset). And yes, I was pushing down firmly on the camera button.
Each reset brings me to the tri-color bootloader screen with NO text. No model number, no OS version, no "USB" / "Serial"....just the red-gree-blue-white stripes.
I have looked extensively at all the forums, used the google search for the site and combed the wiki with no luck.
So do you think it is a lost case?
-Alex-
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
luthor_70 said:
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
Click to expand...
Click to collapse
I was trying to load a new ROM but I assumed that I had to use the OliPro unlock first.
Got to the radio flash and that is where it crapped out.
Now that I have read a little more carefully it looks like I don't need to use the OliPro beyond the first step for the stateside unlocked 7501.
Thanks,
-Alex-
when your on bootloader ? does windows detect a usb generic device ?
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
bairda said:
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
Click to expand...
Click to collapse
Key rule to remember is to always make sure the Advantage is Fully charged. Try charinging it and reflashing it with the factory rom, located here. http://www.america.htc.com/download/RUU_Athena_HTC_US_2.19.453.4_105_1.47.51.00_Ship.exe. Keep us posted and let us know how it went
have you removed the sim and memory card
just checking basics
try that with a full charge and then enter bootloader and connect to usb
Thanks for all the help! I gave up and warrantied a new unit where I WAS successful in loading a new ROM.
I have learned several valuable lessons in the ROM upgrade process. This was on an advantage 7501, unlocked, USA version. I did the upgrade the process with the OliPro 3.0 unlocker, the PK Rom 3.0 and vista pro (32bit):
- Make sure that you have NOT customized your athena/advantage beyond the basic calibration and cut/paste walkthrough.
-Download ONLY THE MOST RECENT VERSION OF THE OLIPRO UNLOCKER. CHECK TWICE TO MAKE SURE THAT YOU HAVE THE LATEST.
-You MUST let step one of the Unlock complete. With the latest version this will make a bricked Advantage practically impossible.
-Go through step 2 & 3 even if you don't think you need this. It will upgrade the radio and give you peace of mind if you are updating to the PK rom.
-Don't panic if you complete step 1 and goof step 2/3. You can recover. But if you screw up the initial SPL unlock in step1...it is not going to be pretty.
Hope this helps!
Thanks for everyones advice!
-Alex-
I was Trying to go back to the stock rom, and the way I understood it was to reloack the Tiatan. So I did. Next Ran RUU with stock Rom and now is stuck in Bootloader. Tried to run Unlocker and has to be connected to Activesync first. Can some one help ??????
When you said bootloader screen. Do you mean the tri-color display (where you see the SPL version)?
If so, you need to get Titan_ExitBl.exe.
Before you launch that file, make sure you disable the USB connection in ActiveSync.
If you are stuck at the logo splash screen, press POWER, CAMERA and RESET buttons together.
It will take you back to the tri-color display (bootloader), where you can update your Radio and OS ROMs.
Yes I am stuck at the tri color screen
It is stuck at the tri color screen, tried to load same rom as was running and it stick at loading with 0%. On my computer it goes to recovery mode. also tried to unlock again, but this is where I have to be connected to Activesync.
If anyone has link to this file I am looking but havent found it yet. searching for these theads can be pretty complex. All the info is all spread out.
Thanks for any help
Titan_ExitBl.exe mirror
Could someone post a thread for Titan_ExitBl.exe? PPC geeks has been down and several people could use this. I don't need it now but would like to have it just in case.
Thanks!
Gubber22 said:
If anyone has link to this file I am looking but havent found it yet. searching for these theads can be pretty complex. All the info is all spread out.
Thanks for any help
Click to expand...
Click to collapse
serfboreds said:
Could someone post a thread for Titan_ExitBl.exe? PPC geeks has been down and several people could use this. I don't need it now but would like to have it just in case.
Thanks!
Click to expand...
Click to collapse
Here, I just uploaded the copy I had.
http://rapidshare.com/files/92944471/titan_exitbl.rar.html
Solved
THANK, THANK YOU.
Now what did Titan-exibl.exe. do?
Would like to know as for future references,
And Thanks all for the fast replies, I had been looking for the answer for some time now and I know with in the last week I had run across post the said they were stuck in simular problems like I was but for the life of me I could not find the answer
Thanks
Allen
00000000000hhhh
Exit Bootloader I would bet..
Feed me peanuts and call me Dumbo
Pasukun said:
Here, I just uploaded the copy I had.
http://rapidshare.com/files/92944471/titan_exitbl.rar.html
Click to expand...
Click to collapse
Thanks for the upload. I appreciate it.
Hey guys!
I know this topic really dosn't belong here, but i know that the guys in this forum has much knowlegde so i am trying here!
I have this HTC Hurricane phone, and yes i have asked there but no one seems to be able to help, and then i wanted to flash WM6 on it. For that i needed another SPL, which i got from there and flashed it. The flash it self went fine
But for some reason now, the Hurricane can't do anything at all. I can't turn it on normally i just get a white screen after about 10 seconds after i press the power button. The same happens when i try to get to the bootloader (!), all i get is a white screen after about 10 seconds of nothing. When the device shows me this white screen i also can't get it to connect with my PC! The computer dosn't see it at all, not just active sync, but i do not get that windows xp sound when i plug in a usb device.
So, what can i do? Is this a really good example of a bricked device or what?
I hope you guys will accept that i write here. The Hurricane forum is as good as dead, and i know you guys here for your expertise!
~D
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
l3v5y said:
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
Click to expand...
Click to collapse
okay that was what i thinking too.. well since i got it very cheap i don't think i will spend any money on such operation.. i guess its quite many money?
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
Note that the prompt only comes up for a few seconds and then it will continue to enter the bootloader.
Click to expand...
Click to collapse
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
Iam lucky for that couse i actually have another hurricane that works! Thank you i will try this on friday or saturday and write back the status.. I hope you will check back..
Iam glad i can allways count on the people in here!
unbrick it
http://forum.xda-developers.com/showthread.php?t=292667
try the alphazero solution =) !!!!
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
I have just tried the method. But still i do not get anything, but i white screen. I checked that my ROM dump worked by the other phone. It does ask me if i want to install the rom, but on the bricked one, i do not get anything just that white screen
Guess thats it?
Then I think it is a good example of a bricked phone...
G4 rom dump?
Hi xda-members,
I wanted to know if it's possible to backup and restore a G4 device. On the wiki, it says i need a CID unlocked device.
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
l3v5y said:
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
Click to expand...
Click to collapse
Ok, on another tread. They said if you got an error while backing up you have a CID locked device. And i already have created a backup. So i think it should be fine.
Hey, to make a long story shorter i tried to root it but did not succeed.. fully.. haha, well it all went smooth until i wanted to go in to recovery first time
after unlocking bootloader, i couldnt get in there, so i erased cache and tried again, and different methods then i started to try to flash another recovery img, didnt want to work and still i could not get in to recovery.... tried to lock and unlock bootloader and other things and nothing....
So i did it from scratch,. but i couldnt even do factory reset from bootloader, couldnt do anything from there really... and then it didnt want to boot normally for some reason, i might just have been impatient but... so i started flashing in another boot.img.... dont ask me why but in the end when i felt there was no more hope i started flashing in everything i had, more or less.. what i think got f'ked up is the Kernel.
i used this guide http://forum.xda-developers.com/showthread.php?t=2069904 and used that all in 1 tool most of the time, but also tried manual commandands via fastboot..
.
when it locked up totally, it didnt want to boot normally after that i could just get in to bootloader, so i sat all day yesterday putting posts in different threads in several forums so dont say i havent looked ^^
i didnt get any answer anywhere in time and it got uncharched, and was dead since yesterday so i gave up, until today, i couldnt charge it.. but i tried now and from nowhere i could get into bootloader again but this time with too low battery to flash!!
and i dont think its charging properly, dont know why exactly.. so im just sticking the usb cable in and out while its powered off since the red Led just light up for a sec when inserted then nothing, just to maybe get some power in there...
so im kind of at a cricis here, and would need help since i dont have anymore time to try to fix it
dont know exaclty what info you need, dont want to boot in unneccesary right now so just ask if u need any numbers or whatever..
i bought it very recently here in sweden.. dont rly know what more information i can give
Would surely appreciate some solid help!
Sincerely, jeff
VivaSativa said:
Hey, to make a long story shorter i tried to root it but did not succeed.. fully.. haha, well it all went smooth until i wanted to go in to recovery first time
after unlocking bootloader, i couldnt get in there, so i erased cache and tried again, and different methods then i started to try to flash another recovery img, didnt want to work and still i could not get in to recovery.... tried to lock and unlock bootloader and other things and nothing....
So i did it from scratch,. but i couldnt even do factory reset from bootloader, couldnt do anything from there really... and then it didnt want to boot normally for some reason, i might just have been impatient but... so i started flashing in another boot.img.... dont ask me why but in the end when i felt there was no more hope i started flashing in everything i had, more or less.. what i think got f'ked up is the Kernel.
i used this guide http://forum.xda-developers.com/showthread.php?t=2069904 and used that all in 1 tool most of the time, but also tried manual commandands via fastboot..
.
when it locked up totally, it didnt want to boot normally after that i could just get in to bootloader, so i sat all day yesterday putting posts in different threads in several forums so dont say i havent looked ^^
i didnt get any answer anywhere in time and it got uncharched, and was dead since yesterday so i gave up, until today, i couldnt charge it.. but i tried now and from nowhere i could get into bootloader again but this time with too low battery to flash!!
and i dont think its charging properly, dont know why exactly.. so im just sticking the usb cable in and out while its powered off since the red Led just light up for a sec when inserted then nothing, just to maybe get some power in there...
so im kind of at a cricis here, and would need help since i dont have anymore time to try to fix it
dont know exaclty what info you need, dont want to boot in unneccesary right now so just ask if u need any numbers or whatever..
i bought it very recently here in sweden.. dont rly know what more information i can give
Would surely appreciate some solid help!
Sincerely, jeff
Click to expand...
Click to collapse
Dude I just googled ur problem......
found a possible solution from HTC One X forum http://forum.xda-developers.com/showthread.php?t=2148689
refer Post #4 the bat file might solve ur problem
Anyways I would like u to confirm it with some senior developers(PM them)
I'm sure they ll help u out.....
Good luck
Danny Samuel said:
Dude I just googled ur problem......
found a possible solution from HTC One X forum http://forum.xda-developers.com/showthread.php?t=2148689
refer Post #4 the bat file might solve ur problem
Anyways I would like u to confirm it with some senior developers(PM them)
I'm sure they ll help u out.....
Good luck
Click to expand...
Click to collapse
it aint that easy.. ive been to several threads that were it was similiar problems, tried all those similiar solutions aswell.. this one was nowhere close to my solution
i tried it but now again its stone dead cant even get in to bootloader so computor just says waiting for device.
who are these senior developers and where do i find them??...
what recovery are you using
Lloir said:
what recovery are you using
Click to expand...
Click to collapse
i was trying to use the TWRP 2.4.1.0 at first, then tried clockworks with no success..
now i think i want to download some fresh ones... again
VivaSativa said:
i was trying to use the TWRP 2.4.1.0 at first, then tried clockworks with no success..
now i think i want to download some fresh ones... again
Click to expand...
Click to collapse
just plug the phone into the wall, leave it for a day or so.
Lloir said:
just plug the phone into the wall, leave it for a day or so.
Click to expand...
Click to collapse
alright, that might solve my battery problem... but then what? my problem still consists...
then flash a correct twrp\boot.img\rom
Lloir said:
then flash a correct twrp\boot.img\rom
Click to expand...
Click to collapse
that is what ive been trying all along, tried to clear cache.. but it seems like the first one i got in there wont go away and is priotized or something..
it was this morning i tried for fun to press power and it started i was like wtf because it wasnt plugged in.. then i plugged it in to start this thread its been shut down and plugged in the wall since i put this thread, around 12.. and i cannot start in into bootloader again, completely dead for now..
if i insert it in to my pc the red LED flashes 3 times if i put it in the wall it flashes steady 1 time. but does not seem to get any charge from either
VivaSativa said:
it was this morning i tried for fun to press power and it started i was like wtf because it wasnt plugged in.. then i plugged it in to start this thread its been shut down and plugged in the wall since i put this thread, around 12.. and i cannot start in into bootloader again, completely dead for now..
if i insert it in to my pc the red LED flashes 3 times if i put it in the wall it flashes steady 1 time. but does not seem to get any charge from either
Click to expand...
Click to collapse
Your battery is critically low.
As already advised by lloir... Just plug it in to the charger, and may forget for a good 24 hours so that the phone exists....
Addicted2xda said:
Your battery is critically low.
As already advised by lloir... Just plug it in to the charger, and may forget for a good 24 hours so that the phone exists....
Click to expand...
Click to collapse
i will do that, its still in the wall and shut off, and try some solution tomorrow, but i still dont quite have that solution ^^
Once charged, you could download the correct RUU, flash that, and restart from scratch. You may have to relock the bootloader using Hasoon's toolkit. After that, its not complicated - use Hasoon's kit to unlock again, flash the correct recovery, sideload a ROM and boot up your phone.
surfatwork said:
Once charged, you could download the correct RUU, flash that, and restart from scratch. You may have to relock the bootloader using Hasoon's toolkit. After that, its not complicated - use Hasoon's kit to unlock again, flash the correct recovery, sideload a ROM and boot up your phone.
Click to expand...
Click to collapse
i have the correct RUU on my desktop, i searched for ages before i found it, but this is an .exe and starts a program for me and have failed at the last part.. i cant try it now so i can see what it said and i cant remember exactly at what step it failed.. i came like halfway in to it
or do you mean the ruu.zip version? to flash it manually into the device?
did you relock the bootloader? the error message might help
surfatwork said:
did you relock the bootloader? the error message might help
Click to expand...
Click to collapse
relock it for what step, i tried to lock and and unlock it several times
seriously, you need to read atleast a little bit - a million people before have posted exactly the same questions, have had answers posted umpteen times. you need to relock the bootloader before you run the RUU.
surfatwork said:
seriously, you need to read atleast a little bit - a million people before have posted exactly the same questions, have had answers posted umpteen times. you need to relock the bootloader before you run the RUU.
Click to expand...
Click to collapse
well sorry for acting Stupid but i just want to be completely sure since ive been at it since friday now
if i get it to start tomorrow, i think ill start with the .bat file to get it to charge some more, then relocking the bootloader, then flashing a proper ruu..
is these steps somewhat correct??
no one??? i got it to boot a short time today then stone dead again so there is some hope
Okay so my phone randomly rebooted 2 days ago and when it got to the LG logo screen it froze. I tried to hard reset it, i went in to the hard reset menu clicked yes once then confirmed the hard reset by selecting yes a second time and the phone froze on highlighted yes. I have pulled the battery and tried to do this multiple times to no avail. So next i went to my PC and started google searches. Often i found things such as being stuck in boot loop which my phone wasn't, it was just frozen at the LG logo screen. Regardless I like to think of myself as self educated tech savvy (which now from reading all of your posts im not, im not even a little bit, in fact im tech stupid.) I did follow post through to the LGUP tool and downloaded a stock KDZ and got my phone into download mode>firmware update screen, i was able to get al the correct drivers and get LGUP to recognize the device and i loaded the stock KDZ and tried to do a Complete wipe reinstall. The program as able to interact with my device and went through the process, i thought i had fixed my phone. After a fresh install(or what i thought was a fresh install) i rebooted after the update and went to the LG logo screen and froze. The only difference is now when my phone starts, right before the LG logo appears i get the green android robot with what looks like open working "guts" real quick before it goes to the Logo and freezes. So back to the drawing board and i wanted to attempt some of the things ive seen like TWRP recovery etc but here i am getting lost. Forgive me if im posting things that have been answered but i keep getting confused. I dont know what the difference is between fastboot boot loader recovery mode or any of that is. also i kept noticing time and time again that my phone has to be in USB debugging mode and i dont know if it is. I cant turn my phone on to get it into USB debugging mode now anyways. Im okay with my warranty being voided and im okay with rooting if thats what i have to do to make it work. I have installed ADB and fastboot and some twrp recoveries etc but im clueless. Lastly know that i never Rooted my phone or anything but i was a torrent downloader. forgive me im triyng to provide as much information as possible.
PLEASE NOTE - I had to sign up to post here obviously and i loved how it said if you have an IOS go buy an android and come back LOL
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
tried
joshualuna said:
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
Click to expand...
Click to collapse
i tried to message tung kick and it said user not found?
sjeffreysmith said:
i tried to message tung kick and it said user not found?
Click to expand...
Click to collapse
Use Messenger on FB
i appreciate the resonse
joshualuna said:
Use Messenger on FB
Click to expand...
Click to collapse
is that the name to search for on fb? "tung kick"
sjeffreysmith said:
is that the name to search for on fb? "tung kick"
Click to expand...
Click to collapse
Try again on here but lower case and name is one whole wrd. tungkick
joshualuna said:
Try again on here but lower case and name is one whole wrd. tungkick
Click to expand...
Click to collapse
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
sjeffreysmith said:
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
jsu718 said:
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
Click to expand...
Click to collapse
SD card my only option?