Hi all ,
I just wanna check wif u all tat when updating the ROM version , is it necessary to fully charge the phone ? Any reason behind ?
And one more thing , my phone keep unable to call out . the signal status bar show full reception , but my phone just unable to call out or send msg , then i will have to soft reset it , and i works fine . U guys having this kind of problems too ? Any remedy for tat?
roytho said:
Hi all ,
I just wanna check wif u all tat when updating the ROM version , is it necessary to fully charge the phone ? Any reason behind ?
Click to expand...
Click to collapse
not necessary to be fully charged, but minimum half must be charged. coz when th upgrading process is going u,r phone cannot be charged via USB. so if there is no inof power u can't upgrade succeccfuly, & u,r phone might become un-used....
Related
Dear Master
I try to flash my xda2 from english to chinese but when i flashing my place back down ,the phone now show serial v1.06 but can't on ,any solution to soft this problem??pls help ..
rgds
i use the serial cable and downloaded a new rom from myxda.com or tmobiles version 1.72 and installed it but the pda will shut off so just make sure it is on ..if it does shut off right bfore the up grade just take out the battery and reinstall and hit ower button without removing the serial cable and u will be or should be lol fine....
sesso900rr said:
i use the serial cable and downloaded a new rom from myxda.com or tmobiles version 1.72 and installed it but the pda will shut off so just make sure it is on ..if it does shut off right bfore the up grade just take out the battery and reinstall and hit ower button without removing the serial cable and u will be or should be lol fine....
Click to expand...
Click to collapse
hey friend
i had tried wht you saying but the phone still off n its show connection eror ??
rgds
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
sesso900rr said:
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
Click to expand...
Click to collapse
i try to do wht u said ,the system start to erase the rom from ppc but its erase untill 1-2 hours still under erase ???
sesso900rr said:
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
Click to expand...
Click to collapse
need your help pls ...
i was trying to upgrade my G4(O2 XDA mini ) device to WM 6 , which previously i hav done to many of my friends devices , now my device is neither switching on nor even getting charged . if i connect to AC Powersupply also its not getting charged ..............CAN SOMEONE HELP ME OUT . I WULD BE GRATEFUL TO THEM . PLEASE HELP ME OUT ......
sorry buddy if its not turning on or charging, you've gotta brick
balugv said:
i was trying to upgrade my G4(O2 XDA mini ) device to WM 6 , which previously i hav done to many of my friends devices , now my device is neither switching on nor even getting charged . if i connect to AC Powersupply also its not getting charged ..............CAN SOMEONE HELP ME OUT . I WULD BE GRATEFUL TO THEM . PLEASE HELP ME OUT ......
Click to expand...
Click to collapse
I'd suggest you confirm whether the battery is completely discharged by borrowing one of your friends batteries or charging your battery up in an external charger.
If you have brick'd it, (which i really doubt) then you are screwed.
Try using another battery, and flash the wizard Love rom to recover it
the only way to brick ur phone is if u flashed ur g4 device with a g3 rom. if u did this, u do have a bricked phone and ur only option (as far as i know) is to send it back to cingular and ask them to reflash the spl back on. Lets hope that its just the battery. good luck.
hello seniors
i have galaxy s2 with litening rom 6.1 amd kernal speedmod t39. one week ago i install chainfire 3d pro but somehow it didn't work on my s2 so i decide to uninstall it. after uninsalling every thing was fine. but today when i turn off my s2 and restart it. it didn't restart. then i try to go into download mode but nothing even i m not able to enter in recovery mode. i try every thing to come back mu s2 but nothing
i try to pull off battery and reinsert it in to fone then start but fail
i try to pull off battery and then press 1minute power button to complete discharege the current and then press download mode and reinsert the battery but fail
i try to connect the cable and insert the battery but i see only this mssage on my laptop"sec s5pc210 test b/d driver is not installing success fully" and nothing happen with my s2,
so please seniors and developers what should i do to recover my s2 help me
You have no recovery and no download mode correct ???
Charge battery .
Buy USB jig and try that to get download mode .
That fails its a service centre job and be aware that the warranty on the phone has been invalidated so you may be charged for the repair .
jje
now i came to know that my galaxy s2 bootloader is corrupted. thats why i m not able to enter in download mode and recovery mode too. jig is also note working in this condition. so any soloution in this condition seniiors and developers plz?
how can i repair corrupt bootloader?
Service centre if you cannot enter download mode .
jje
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
bruceleedragon1 said:
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
Click to expand...
Click to collapse
id honestly take it to a service center friend...best thing to do really..sorry
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to start why plz help me
bruceleedragon1 said:
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to
Click to expand...
Click to collapse
start why plz help me
Open a map and find service centre .
Or post me your SGS2 with 500 dollar to fix .
jje
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
neon_skunk said:
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
Click to expand...
Click to collapse
Regarding this method of JTAG, here is a list of dealers that do repair phones via JTAG:
Samsung Boot / Jtag / UnBrick / Dead Phone / Software Repair Dealers
bruceleedragon1 said:
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
Click to expand...
Click to collapse
Hey hi i am also having the same problem as mentioned by you...pls guide me if u have restored your mobile to running state..
my device doesnt shut down , it keeps restarting everytime i try to shut it down .
if the battery is dead , it shuts down . but not when i want to .
For eg. i cannot go to recovery or download mode at all .
please help
Well apart from reading al the exact same question posts i would A factory reset B if that fails flash a stock rom or return to service centre for warranty .
jje
Or C clean your usb port.
Or D) provide some more info on what method you use to shutdown, what rom and kernel you have, is CWM installed, etc.
In the CWM app you can chose what method to use for rebooting, f.e. into recovery or in download mode.
rnksarda said:
my device doesnt shut down , it keeps restarting everytime i try to shut it down .
if the battery is dead , it shuts down . but not when i want to .
For eg. i cannot go to recovery or download mode at all .
please help
Click to expand...
Click to collapse
i want to change back to stock kernel . i tried restoring the gingerbread via cwm , however my kernel is still shows codeworxx
the battery died after ffew hours.
the problem is i cant get my phone to start . it shows a battery logo , with temperature symbol and when it was on it used to show that its over voltage ( been using 8 months without this kind of an error)
its been dead for 5 hours now . everyone suggested me to go back to stock kernel , am scared of cm9 now .
i dont want to loose my phone :/
please help
ps : my friend's s2 battery works fine .
rnksarda said:
i want to change back to stock kernel . i tried restoring the gingerbread via cwm , however my kernel is still shows codeworxx
the battery died after ffew hours.
the problem is i cant get my phone to start . it shows a battery logo , with temperature symbol and when it was on it used to show that its over voltage ( been using 8 months without this kind of an error)
its been dead for 5 hours now . everyone suggested me to go back to stock kernel , am scared of cm9 now .
i dont want to loose my phone :/
please help
ps : my friend's s2 battery works fine .
Click to expand...
Click to collapse
First, you need to say THANK YOU the guys who trying to help you, second follow their suggestion.
rnksarda said:
i want to change back to stock kernel . i tried restoring the gingerbread via cwm , however my kernel is still shows codeworxx
the battery died after ffew hours.
the problem is i cant get my phone to start . it shows a battery logo , with temperature symbol and when it was on it used to show that its over voltage ( been using 8 months without this kind of an error)
its been dead for 5 hours now . everyone suggested me to go back to stock kernel , am scared of cm9 now .
i dont want to loose my phone :/
please help
ps : my friend's s2 battery works fine .
Click to expand...
Click to collapse
Hold on, so your friends battery works, but yours doesn't? Just buy a new battery, for gods sake. Thinking it was an internal error. Use your friends battery, unroot your phone or whatever you want to do...
Chris.
Hi.
I have a problem with my phone. When i put my phone in my bag , suddenly my phone bootloop it self. So , i wait until the battery runs out.
When i charge it , it keep bootloop it self even i press the red small button near sim card. So i won't charge it full and let the battery runs out.
I already flash with three different ROM , its S119 ROW , S123 ROW , S124 ROW. I also try Frimware -> Upgrade and Download.
When i flash it , it won't on restart it self after i finish flashing. So i press the red small button again after flashing , but its keep bootlooping.
And i also try charge it again after flashing , but it keep bootlooping when charging. I also can't enter meta-mode , recovery mode and else.
Maybe its hardware problem? i am using MIUI room before it bootloop. But everything runs fine
How to fix it ?
PS : Sorry for my bad english :3
TheSentinels said:
Hi.
I have a problem with my phone. When i put my phone in my bag , suddenly my phone bootloop it self. So , i wait until the battery runs out.
When i charge it , it keep bootloop it self even i press the red small button near sim card. So i won't charge it full and let the battery runs out.
I already flash with three different ROM , its S119 ROW , S123 ROW , S124 ROW. I also try Frimware -> Upgrade and Download.
When i flash it , it won't on restart it self after i finish flashing. So i press the red small button again after flashing , but its keep bootlooping.
And i also try charge it again after flashing , but it keep bootlooping when charging. I also can't enter meta-mode , recovery mode and else.
Maybe its hardware problem? i am using MIUI room before it bootloop. But everything runs fine
How to fix it ?
PS : Sorry for my bad english :3
Click to expand...
Click to collapse
Be wise and go with your phone in to a service store . From what you described to us this could be a hardware problem.
stympy said:
Be wise and go with your phone in to a service store . From what you described to us this could be a hardware problem.
Click to expand...
Click to collapse
Oh , crap. Okay, i will. Thank you btw
i have the same problem !! and i made a threat for that!
Tomorrow i am going to a service store....
Tell me, if your phone works again! thanks .