this is the phonepad artwork of ieuz did for the Magican 2 years ago from http://forum.xda-developers.com/showthread.php?t=241106 , it had a wrong display for T9 in cap mode and have stoped in version 1.0 till now. All the artwork (C) by ieuz.
Just wanna make my hermes some up to date
i retouched the T9 mode, and put it to the "Phone Pad - English Only.CAB" from FTP so this is T9 English only!
ADDED: International T9 for German, French, Italian, Spanish, Portuguese, Danish, Finnish, Nowegian, Swedish (file attatch below)
ADDED: VGA version
I tested only on MS emulator, maybe it work or not on your real rom, please try, Thanks! VGA screenshot by carnero on FSC LOOX N560
ADDED: International T9 for Czech, Dutch, Turkish, Greek (file attatch in page 4 floor#32 contributed by mccune)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2/ the 2nd cab is make vibrate when you touch the numbers in the dialpad (dial call), i love this so i make this for wm6 (didnt try to uninstall this)
Tested only on my hermes, hope it works for you too!
Please let me know,if it's work with another model too. Thanks bro!
origin version here http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils
looks nice, good work!
Thanks!
Works well, and looks great. Well Done
Good stuff bro! Works well!
Installed it on my Hermes with LVSW 3.30.2.1.
Thanks vua777! It's miles better than the standard phone pad. It always hurt my eyes with those horrible bright colors.
Hey
Looks really great, does it works on an HTC P4350? It is possible to get it with german T9, pleeeeeaaase.
Regards, Tommy
Ok, just letting people know, for those using SKTools - trying to set this version of phone pad as default SIP with the "input methods" tool will not work, it renders the system inaccessible upon soft reset. I tried three times and had to hard reset every time.
SIPChange does the job with this one.
SIPchange is default to my rom, and didnt know why SKTools makes the system inaccessible.
you tried 3 times, so i needless to hint you uninstall pre-version before install this.
the new international t9 i made the cab sefl-register some dll files. i try with SKTools later.
thanks for info us bro!
Very nice work for showing us this bro. Really diggin it.
Nice but doesnt work on my Trinity. Could be a registry problem, any idea where I can edit?
Stunning. Been after a T9 input pad that looks nice for a while. This is perfect & works great with the black-blue rom.
Thanks.
it work great in my touch! thanks !
works fine on htc-apache...
many thanks vua777, and hello all. the aku 3.5 for apache killed the default phonepad application and i was getting frantic for something that would allow me one-handed texting. installed cleanly on the PPC-6700 and works out of the box.
best...... amenon
Wow, thanks a lot, it looks awesome!
I think it's too much asking but could you make a cab with spanish t9 only?
Thanks again and regards!
I've try this pad on my Trinity, it work fine and I like really much.
I like to think to myself like a graphic designer, but I totally ignore all of programming, so can someone tell me how to extract the skin to understand how it work and create one myself?
thanks all for your confirms success worked with other devices.
@jshooter & darkat: for making your own single lang or edit skin
you need some tools by google internet and this great forum:
1/ "WinCE CAB Manager" for edit, extract.. file/registry for Windows Mobile cab file (this tool is easy to use like wysiwyg)
2/ a resource editor for edit, export, import resource image/string from a dll/exe file (ex: "resource hacker") : wysiwyg
3/ "signcode" (search forum) for resign certifcate to the edited file (exe or dll) : total easy
that's all i think!
hope this cuold help, looking for your release!
vua777 said:
thanks all for your confirms success worked with other devices.
@jshooter & darkat: for making your own single lang or edit skin
you need some tools by google internet and this great forum:
1/ "WinCE CAB Manager" for edit, extract.. file/registry for Windows Mobile cab file (this tool is easy to use like wysiwyg)
2/ a resource editor for edit, export, import resource image/string from a dll/exe file (ex: "resource hacker") : wysiwyg
3/ "signcode" (search forum) for resign certifcate to the edited file (exe or dll) : total easy
that's all i think!
hope this cuold help, looking for your release!
Click to expand...
Click to collapse
Thanks! I've found all suggested tools, now it's time to work for me... probably I break you again in a couple of days
Help...
This looks great except that it doesn't work on my 8525. Device is stock w/ PTT reassign. Firmware is latest AT&T. Any ideas?
Not working on WM5 Trinity :'(
vua777 said:
thanks all for your confirms success worked with other devices.
@jshooter & darkat: for making your own single lang or edit skin
you need some tools by google internet and this great forum:
1/ "WinCE CAB Manager" for edit, extract.. file/registry for Windows Mobile cab file (this tool is easy to use like wysiwyg)
2/ a resource editor for edit, export, import resource image/string from a dll/exe file (ex: "resource hacker") : wysiwyg
3/ "signcode" (search forum) for resign certifcate to the edited file (exe or dll) : total easy
that's all i think!
hope this cuold help, looking for your release!
Click to expand...
Click to collapse
Ok, first try first problem
- Extracted .dll form .cab with WinCE CAB Manager
- Extracted 2 .bmp from IntelliPadPRC123.dll with ResHacker
- Created 2 new .bmp with same name, dimensions, color depth and nearly same size of original
- Replaced 2 .bmp with mine in IntelliPadPRC123.dll with ResHacker
- Try to sing modified .dll with signcode but it return:
Error: Signing Failed. Result = 80070057, (-2147024809)
I've not found this error for a case like mine in forum, I don't know what causes it.
Any suggestions?
Related
Description
Minesweeper for Pocket PC is a FREE game runs on Windows Mobile 5, 6 and 6.5 with tactile screen.
it has a multi-language interfaces include 10 languages, 4 different levels to face.
it will be a nice game when you spend your spare time on the bus, metro or trains on your way work/home.
requires .NET Compact Framework 2.0 or up. but if you have a WM6+, no need to install it.
Version 1.5.1 Release 2
Russian Translation was updated, Thanks to: Мерген Алимаганбетов.
**Write me when you've found bugs or have comments**
Version 1.5.1
Super mark enabled, click and hold to mark on cells. without clicking the mark button.
Add Portuguese language support, thanks to: Fabiano Santiago
Fix Polish language support, thanks to: Błażej Jeżewski
Version 1.5.0
9 supported languages: English, Français, Italiano, Deutsch, język, русский, 简体中文, 繁體中文, 日本語.
Support any screen (QVGA, WQVGA, SVGA, VGA, WVGA) whatever portrait or landscape mode.
3 themes included : Blue，Olive and Silver.
Sound improvements.
Animation when lost.
Mark and Question buttons can be hold.
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video show on youtube
http://www.youtube.com/watch?v=4LbY87h8AXY
Download Link:
http://cityadvisor.net/c_download/Product.aspx?pid=4
Installation Guide:
1. Download the cab file
2. Copy the downloaded cab file to your phone
3. Launch it from your phone
4. follow instructions
5. enjoy. the setup program will create a short cut in your Programs/Games folder
Change Log:
Update on 2010-01-06
* WVGA and WQVGA support.
Version 1.0.2009.0110
* Add: Polish Language Support. [Thanks to: Błażej Jeżewski for translating]
* Fixed Bug: the Option button shows a white rectangle on the bottom-left on QVGA(240x320) screens
[Thanks to Seething Sun]
* Fixed Bug: display issues on QVGA screens, the list takes only 1/4 of the screen
* Fixed Bug: if you have used all Mine Flags, the flag tag will be disabled
[Thanks to HahaHandy @ XDA]
* Changed: Optimized some pictures for QVGA, so you will may have a clearly look
* Changed: The version numbers now become Major.Minor.Year.Date
so now the current version is 1.0.2009.0110
Version 1.0.927
* Support: multi-language support - English, French, Simplifed Chinese and Traditional Chinese.
* Add: 4 levels added, so you can choose easy, medium, hard or custom levels.
* Add: Sound support when you win or lose or open the mines, you hear the sound.
* Add: Options so you can also enabled/disable the sound, set the numbers of mine for custom levels
* Add: A hall of fame for each level except custom level to remerber your best record
Version 1.0.919
* First release
* Support: QVGA and VGA screens on portait mode
* Support: 15 mines in a 12x12 table
* Support: Flag tag
* Support: Mark tag
Hi
i would like to download it but you link doesn't work...
so please post a new one...
best greetings
Well Try <<
Broken Link . . .
Can provide CAB file? Will be great.
Want to try this! please repair your link
Sorry
Sorry, i've repaired the link.
for the CAB file, i don't know how to create shortcut to the exe file,
i'll create one when i got it.
can not run in htc diamand and O2mini.....problem app....
yeah,broken link!!!
hkpeople said:
can not run in htc diamand and O2mini.....problem app....
Click to expand...
Click to collapse
can you tell me the details about errors please?
i tried it in a diamond 1.93 rom and a Touch Dual original french SFR. it works fine.
it is wrote in C#, so a .NET compact framework 2.0 is required.
x_sliver said:
can you tell me the details about errors please?
i tried it in a diamond 1.93 rom and a Touch Dual original french SFR. it works fine.
it is wrote in C#, so a .NET compact framework 2.0 is required.
Click to expand...
Click to collapse
你又唔早D 講!
why do not say it early !
Pls confirm does this app need to install ".NET compact framework 2.0 " in order to get it work?
alken00 said:
Pls confirm does this app need to install ".NET compact framework 2.0 " in order to get it work?
Click to expand...
Click to collapse
Copy *.exe directly to TD and run.
It works with SwiftBL ROMs.
.cab installable file
Hi guys, I made a cab file for minesweeper, it installs the app and places a shortcut in the games folder. It doesn't have an icon though so it isn't easy to recognize in the all programs list built in to the diamond
Richardprins said:
Hi guys, I made a cab file for minesweeper, it installs the app and places a shortcut in the games folder. It doesn't have an icon though so it isn't easy to recognize in the all programs list built in to the diamond
Click to expand...
Click to collapse
hi, thanks for that, did you create the cab in VS2008? i create a shortcut in games folder, but when i test the installation, there is no shortcut.
hkpeople said:
你又唔早D 講!
why do not say it early !
Click to expand...
Click to collapse
sorry, but i thought WM6.0 and 6.1 devices have already installed .Net CF.
am i wrong?
x_sliver said:
sorry, but i thought WM6.0 and 6.1 devices have already installed .Net CF.
am i wrong?
Click to expand...
Click to collapse
No..Just a joke.. do not mind
We made a short video of x_sliver's Minesweeper.
http://revver.com/video/1193988/minesweeper-for-windows-mobile-pocket-pc/
Thanks for the game, x_sliver, it's fantastic!
Great job!! Thx so much!!
This is such a great game
But the application icon is missing?
Hi again, another week end. so i can do nothing for work but let my game runs better. and, yes, i'm sure it is much better than the first version.
Changelog:
Version 1.0.927
* multi-language support for English, French, Simplifed Chinese and Traditional Chinese I don't understand other languages but it is easy to make the support.
* Add levels so you can choose easy, medium, hard or custion levels.
* Add sound, when you win or lose or open the mines, you hear the sound
* Of course, you can also disable the sound
* A hall of fame for each level to remerber your best record
Now, that's it. try it now and send me feedbacks. about icon, for instance, i stole the icon of Windows Vista, so i think M$ can keep its copyright on that icon.
i still confused about the installation CAB file, i made the cab file in VS2008, the file is ok, but after installation, no localized resources in the folder, so The CAB file doesn't have the multi-language support, but there is also a ZIP file that contains all resources. so i still have something to learn.
Download the file:
The ZIP file: http://huaxing.yuan.free.fr/files/minesweeper.zip
The CAB file: http://huaxing.yuan.free.fr/files/minesweeper.cab
so if you don't need french or chinese, you can download the cab version, it will install and create the shortcut. otherwize, unzip all files in the zip file, copy to the phone then you can run it. you must have the .NET CF 2.0 to launch it, but all WM6 phones have it.
Again, any suggestion and feedback are WELCOME.
Hi All,
I would like to introduce a muti-language dictionary and vocabulary learning aids application.
It's called BVocabulary.
Please watch the DEMO Video in youtube first
http://www.youtube.com/user/bokiteam
The latest DEMO video is for BVocabulary 1.9, however, you can download the version 2.0 in current thread.
I would like you to visit another thread to get more detail:
http://translate.google.com/translate?prev=hp&hl=en&js=n&u=http://www.mobile01.com/topicdetail.php%3Ff%3D129%26t%3D918269%26r%3D2%26last%3D10862747&sl=zh-CN&tl=en&history_state0=
The major problem in beta are some popup messages not displayed in English yet ... however, I think it is not a big obstacle to use this software.
I didn't pack them to cab file, you could copy and then use it directly, this version are free to use/test until 2009/10/01. ( after deadline, it will disable some functions )
You can also download startdict dictionaries (http://stardict.sourceforge.net/Dictionaries_dictd-www.dict.org.php) to customize your BVocabulary.
P.S
1. This based on .Net Compact Framework 3.5
2. You can not download anything from mobile01 site unless you are a member, however, just let me know anything you need, I will post it to XDA.
This is my first post in XDA, let me know if I do anything wrong.
Thanks!
Boki
==============================
2009/10/31 Update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my official site:
http://bokiteam.myweb.hinet.net/
==============================
2010/01/17 Update (Latest version, newer than attachments, but you still need the attachment for the BVocabulary.dll )
BVocabulary VIVID:
http://sites.google.com/site/bvocabulary2/BVocabularyViVid_20090117.zip
BVocabulary Standard:
http://sites.google.com/site/bvocabulary2/BVocabulary2p31.zip
and, welcome donation to let me know you also like my work Thanks!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=11236704
/////////////////////////////////////////////////////////////////////////
//
// 03 July 2010 Update free version of BVocabulary VIVID.
// ( DLL file of previous version is required )
//
////////////////////////////////////////////////////////////////////////
Please download it in attachment - [BVocabularyVivid_3July2010.zip]
[10 JUL 2009] Add introduction slides.
Version 2.1
* .Net Compact Framework 3.5 is required.
* How to use StarDict dictionary ?
1. Download the dictionary from stardict website.
2. Uncompress the dictionary file, copy to your Windows Mobile device.
3. Run BVocabulary.exe , select File, External File, choose the dictionary you uncompressed then use it.
BVocabulary 2.1 Vivid version.
What's new in Vivid version ?
1. Support HTML format dictionary, you can see photo / color text in definition.
2. A little speed up loading speed.
BVocabulary Vivid is a branch from BVocabulary.
Download also available @ my temp page:
http://bvocabulary.googlepages.com/home
BVocabulary VIVID 2.2 Release.
http://bokiteam.myweb.hinet.net/
http://bvocabulary.googlepages.com/home
With version vivid 2.2, there isn't a bar to scroll down and see all the info (and the data doesn't fit the screen - it would be necessary to scroll right also).
With version 2.31 (the last one), though I can scroll, a bug occurs with html dictionaries: they loose formatation (the instructions for alignment and colour and etc. are displayed).
Yup, you are right. They are known issues.
and I am quite busy recently to debug it ...
Sorry about that : )
it's always good to be FREE!! hehe...definitely will give it a try. Thanks for sharing
Good to hear that.
Try this link for latest version ( 2.31 beta )
http://sites.google.com/site/bvocabulary2/BVocabulary2p31.zip
Help
Hi bokiteam, I am new to this site. I would like to know how to install this dict to my wm mobile phone? just follow the steps below that u posted b4?
1. Download the dictionary from stardict website.
2. Uncompress the dictionary file, copy to your Windows Mobile device.
3. Run BVocabulary.exe , select File, External File, choose the dictionary you uncompressed then use it.
Can I have many dictionaries in stardict to be displayed at one time after installed? And if is possible for this dict to pronounce the words after following the installation step above? Thanks in advance!!
Hi
Yes, we only need the two files ( BVocabulary.exe and BVocabulary.dll ) then we can use this application.
We can find BVocabulary.dll in packages of old versions, or you could get it from http://www.pocketgear.com/en_US/html/display_product.jsp?id=prod7150551pg
Regarding the displaying multi-dictionaries at the same time, this is unsupported yet. ( if we want to get different result, we could manually switch different dictionary )
To install the pronunciation database, please download WyabdcRealPeopleTTS @ sourceforge.net
http://sourceforge.net/projects/stardict/files/WyabdcRealPeopleTTS/
then uncompressed the zip(tar.bz2) file, put the WyabdcRealPeopleTTS folder to the same directory as BVocabulary.exe
Verification:
Search "book" or "good" in BVocabulary, it should able to pronounce now.
Some more info:
Here is a link that provides a step by step introduction to install BVocabulary ( ex: install stardict dictionary, pronunciation, phonetic font ...etc ), however, it was in Chinese, I post a Google translation link as following:
http://translate.google.com/translate?js=y&prev=_t&hl=en&ie=UTF-8&layout=1&eotf=1&u=http://b-cty.spaces.live.com/blog/cns!404D8E13BA49569C!3922.entry&sl=auto&tl=en
thanks bokiteam, will try it out!!
Hi bokiteam, I am having problem installing giving me this error message:
MissingMethodException
This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
can i know how to check the Net Compact Framework version in my mobile phone. I am using WM6.5
Hi
BVocabulary required .Net Compact Framework 3.5
The default in WM devices I guess .Net CF 2.0
We can check .Net CF version in 'Add/Remove program' ( if you installed it manually before )
Please try 3.5, I think it will work
msia said:
Hi bokiteam, I am having problem installing giving me this error message:
MissingMethodException
This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
can i know how to check the Net Compact Framework version in my mobile phone. I am using WM6.5
Click to expand...
Click to collapse
Hi Bokiteam,
BVocabulary is really a great peace of software, thanks for coding!
The only nasty problem I've discovered so far, is that BVocabulary doesn't interpret some Stardict tags like <k>, </k>. It's basically the same problem as described here:
http://member.teesoft.info/phpbb/viewtopic.php?t=294
It would be very nice if you could fix it in one of the next releases
P.S. One more question? Can BVocabulary accept command line parameters? I mean, if you have many dictionaries and quickly want to access a certain one, it would be very convenient to create a shortcut like "BVocabulary.exe -DictA.ifo" So you could have a shortcut for each dictionary in your start menu like
Dict A - "BVocabulary.exe -DictA.ifo"
Dict B - "BVocabulary.exe -DictB.ifo"
Dict C - "BVocabulary.exe -DictC.ifo"
That would also be great.
Hi Bombenbach,
Please find below link for a newer version ( BVocabulary VIVID - v20090117 )
http://sites.google.com/site/bvocabulary2/BVocabularyViVid_20090117.zip
It can interpret the tags and photos
( To display photo, need to put the dict in root directory, ex: ( \Storage Card\AABBCC\AABBCC.ifo )
For shortcut to load different dict, here is a workaround:
Please find the hidden file in the same folder of BVocabulary.exe ( or BVocabularyViVid.exe )
BVocabulary.cfg ( this is a text file )
Modify the content to necessary dicts ...
ex:
\Storage Card\stardict-quick_eng-kor-2.4.2\EXAMPLE.ifo
then ....
create as many as folders to process them ...
Thank you for your idea, I will consider it.
BR,
Boki.
Thank you for your prompt answer! Bvocabulary Vivid works great *happy*
Does anyone have bvocabulary working flawlessly on HTC HD2?
In Vivid version I always have the same bug: the data doesn't autofit the screen and I can't scroll down and right properly.
Well, actually I also can't see any scrollbars on my TP2, but at least I still can use the arrow buttons to scroll up or down. You may try to remap some buttons on your HD2 to up/down-buttons as I did on my TP2.
It would be nice if I could scroll with my fingers on the touchscreen like in Opera, Word or Outlook, but it seems that BVocabulary Vivid doesn't support that yet.
Hi
You *may* able to scroll screen by touch screen.
I just tested BVocabulary Standard 2.31 and BVocabulary Vivid 2.2 on HTC diamond (WM6.1), both can do touch scroll.
FYI
BR,
Boki.
Bombenbach said:
Well, actually I also can't see any scrollbars on my TP2, but at least I still can use the arrow buttons to scroll up or down. You may try to remap some buttons on your HD2 to up/down-buttons as I did on my TP2.
It would be nice if I could scroll with my fingers on the touchscreen like in Opera, Word or Outlook, but it seems that BVocabulary Vivid doesn't support that yet.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only EXT package if someone wants to make a cab your welcome
After the feedbacks from the diamond keyboard to qvga I never will make a cab again
Mediafire download link
the original idea of the skin came from the RR33 HTC Sense like dialer skin(but it only skined the dialpad)
Ok we need some more info:
this dialer is only portrate (can rotate but no dialing in landscape)
this dialer has video dialing (there is no conference call)
this needs to be cooked into a rom to work as it should.
WVGA version
And here is the WVGA version I'll add some screens later tonight if I find the time
Topaz Hero Dialer 3g
could maybe use this one too
It's cool, thanks man, i will try
There's no landscape support for this dialer right?
Would really like to try a cab... is there anybody willing to cab it up please? Thanks gullum!
thanks for your great work......but i've got a little problem (see picture)
awesome work mate i would cab it up if i knew how to
just curious, is anyone able to port this to WQVGA?
cheers gullum!
lauchi said:
thanks for your great work......but i've got a little problem (see picture)
Click to expand...
Click to collapse
what phone and did you cook it in?
there needs to be a shortcut to phcanvga.exe (amarullz app) in start up folder
great skin, but can't install it. the reg file into phone canvas dir says no valid registry files and when i copy all filesi in windows folder my phone became the wm default dialer. how can i install this skin
ported just from topaz? what about from TP2 ? Just for a landscape mode
would this work on a cdma vga touch pro?
It doesn't have conference call, right?
added wvga to post2 and updated 1. post with a little more info
Compressed Images and CAB
dobb said:
great skin, but can't install it. the reg file into phone canvas dir says no valid registry files and when i copy all filesi in windows folder my phone became the wm default dialer. how can i install this skin
Click to expand...
Click to collapse
Thats because it is a PACKAGE FOR ROM COOKING. There is no cab as of yet. If you look at original post check out these bold areas:
Only EXT package if someone wants to make a cab your welcome
After the feedbacks from the diamond keyboard to qvga I never will make a cab again
..........
this needs to be cooked into a rom to work as it should.
Click to expand...
Click to collapse
EDIT: I went ahead and:
1) Compressed all images and all images inside phcanimages.dll
2) Signed all .dll files (wouldnt install without signatures)
3) Cabbed it all up
5) Edited phcanrc.dll to remove scrollbars
5) Uploaded to my FTP with direct link There is also the uncompressed unsigned cab there which is 14MB compared to 8MB
HERE is the link. I can host for a few weeks, but will most likely remove after that. If Someone needs the uncompressed version let me know and I will sign the dll's and upload again the cab.
DONT FORGET: When installing you need to kill phcanvga.exe and cprog.exe first
EDIT2: Also, I remove phcanoverbmp.dll because most ROMs have this already and it will mess up custom taskbars if overwritten. You can get it attatched to this post.
EDIT 3: Reuploaded corrected cab as per the following few posts.
gullum said:
what phone and did you cook it in?
there needs to be a shortcut to phcanvga.exe (amarullz app) in start up folder
Click to expand...
Click to collapse
oh sorry...i was in an hurry^^
i'm using the htc raphael with own rom (latest htc, added/deletet packs, gen.y manila), shortcut is there...even with original muis i have this problem....
jmckeejr said:
I went ahead and
1) Compressed all images and all images inside phcanimages.dll
2) Signed all .dll files (wouldnt install without signatures)
3) Cabbed it all up
5) Edited phcanrc.dll to remove scrollbars
5) Uploaded to my FTP with direct link There is also the uncompressed unsigned cab there which is 14MB compared to 8MB
HERE is the link. I can host for a few weeks, but will most likely remove after that. If Someone needs the uncompressed version let me know and I will sign the dll's and upload again the cab.
DONT FORGET: When installing you need to kill phcanvga.exe and cprog.exe first
EDIT2: Also, I remove phcanoverbmp.dll because most ROMs have this already and it will mess up custom taskbars if overwritten. You can get it from original package.
Click to expand...
Click to collapse
Thanks, I do appreciate! I'm gonna install it ASAP!
teorouge said:
Thanks, I do appreciate! I'm gonna install it ASAP!
Click to expand...
Click to collapse
Let me know if it works ok. I tested on my own cooked ROM installing over the LEO 2G dialer without issue. Just want to make sure it works ok for others(although I am sure there will be a few who "just can't get it" )
jmckeejr said:
Let me know if it works ok. I tested on my own cooked ROM installing over the LEO 2G dialer without issue. Just want to make sure it works ok for others(although I am sure there will be a few who "just can't get it" )
Click to expand...
Click to collapse
Let's say I nearly got it... Unfortunately, I got my custom taskbar nearly wiped out. However, you can see my specs in sign. I'm running Amarullz's WM6.5 position fix (not Showcase, but previous version with no task manager function), which works perfectly even for Resco2010.
I'm attaching screenshot, I've installed modded Amarullz Rhodium dialer, aluke's rev.6 taskbar (and position fix), if that matters. However, thank you so much to both creator and cabber, dialer is even opening Sense contacts and automatically got Italian translation.
EDIT: sorry I changed the screenshot (cause it contained personal infos... ), so I pointed out the issue with red boxes.
Guess I didnt remove phcanoverbmp.dll after all. I will update the cab for others. You could uninstall and reinstall to get taskbar back(after I update the cab which I will do now), or go to windows and delete phcanoverbmp.dll(assuming your taskbar is a cooked in feature), and it will return to the file build into ROM.
The other issues I believe are due to the phcanvga.exe program(it shows the SIP menu area in a fixed size or something). The empty area on the right was not like that when I tested it, is that always there?
EDIT: Reuploaded cab without the phcanOverbmp.dll and am attatching the file to original post for those that need it.
HTC's Traditional Chinese Ezinput 2.1 for diamond/diamond2 and possibly others
Completed and tested, zhuyin pinyin cangjie english stroke and handwriting all working. also word choice list and contact selection list.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
more: http://forum.xda-developers.com/showpost.php?p=5490141&postcount=12 (Thanks to BB88)
Known issues:
ezinput settings is not resized for vga landscape.
possible issue uninstalling (please back up before trying to uninstall)
tutorial is removed (to reduce size)
possible issue installing over western ezinput 2.1
If you have issues not here, please ask in forum.
I do not know enough to fix any issues, but i support anyone who want to edit my files, just please share your work.
Thanks to:
SOHKis for helping me correct images in dll
BB88 for continued interest and testing
Downloads:
EXT:
VGA: http://www.badongo.com/file/19939544
WVGA: http://www.badongo.com/file/20115555
important: when you include this package remove both IME western engine and input EXT packages from your rom.
CAB:
VGA: http://www.badongo.com/file/20080000
VGA mirror: http://www.rayfile.com/files/90756668-0d72-11df-b811-0015c55db73d/
WVGA: http://www.badongo.com/file/20115503
WVGA mirror: http://www.rayfile.com/files/856ac542-0dce-11df-a700-0015c55db73d/
important: This cab can be installed over IME western or on rom without ezinput but needs to have these packages: HTCFramework, Shared Modules, SharedResource. your rom also needs a chinese font.
tested on Gen.Y R5.3 if you use on another rom please reply with your results
enjoy~
I hope someone can help creating the full cab. Thanks ngn4 for the files.
does it support WVGA ?
ngn4, you can try to use this utility to create cab and registry:
http://forum.xda-developers.com/showthread.php?t=400221
ngn4,
Can it support QVGA?
or Can you show me how to resize and maybe I can try to do a QVGA one.
Thanks!!
ngn4 said:
full CAB: sorry i dont know how>_<
when i try it will not create registries right. this is my last test badongo.com/file/19942119 however is not working. if anyone knows how and would like to make a cab from the ext, i support you. if you try you should observe there are more files and registries in this test cab.
enjoy~
Click to expand...
Click to collapse
I have tried to create full cab before as well and have not gotten it to work. I don't think the cab is installing completely. Right now it looks like once the IME Western is installed, the CHT one cannot be installed? However, in HK CSL ROM, both Western and CHT are present.
OCedHrt said:
I have tried to create full cab before as well and have not gotten it to work. I don't think the cab is installing completely. Right now it looks like once the IME Western is installed, the CHT one cannot be installed? However, in HK CSL ROM, both Western and CHT are present.
Click to expand...
Click to collapse
I am very very close to getting it working, including install on rom with IME western. but only tested on Gen.Y R5.3, need more time to test but will release first version very soon.
i didnt know CSL's diamond2 has both but fk now im jealous =.="
for other sizes.
WVGA: just use the standard packages from htc, no need for my cab.
QVGA: maybe not possible, keyboard can be made smaller, but word choice list and contact selection list probably not so. i saw a ezinput 2.0 resize for qvga but had same problem, but maybe you can try anyways.
ngn4 said:
I am very very close to getting it working, including install on rom with IME western. but only tested on Gen.Y R5.3, need more time to test but will release first version very soon.
i didnt know CSL's diamond2 has both but fk now im jealous =.="
for other sizes.
WVGA: just use the standard packages from htc, no need for my cab.
QVGA: maybe not possible, keyboard can be made smaller, but word choice list and contact selection list probably not so. i saw a ezinput 2.0 resize for qvga but had same problem, but maybe you can try anyways.
Click to expand...
Click to collapse
I am trying to get a cab to install on a WWE cooked rom. HK CSL is a WWE with CHT input. Best of both worlds
OCedHrt said:
I am trying to get a cab to install on a WWE cooked rom. HK CSL is a WWE with CHT input. Best of both worlds
Click to expand...
Click to collapse
cab is ready now, almost as good as a new diamond2 =P
I cannt dowload it
"The requested URL is not supported"
why?
THX for share ,but I can't download these files from badongo in china. Can U upload these files to RayFile? THX
This is working perfectly on my Touch Diamond with Gen.Y D2 R5.3 WWE rom.
Thanks ngn4 for going back and forth with me.
Attached are some screenshots
Works great on my Diamond 2 with Dutty's rom, the only bad is the layout does not resize in landscape mode. But this is still good to use with.
Thanks for sharing!
will there be supporting simplified chinese as well? thx in advance~
Cheers,
Kiay
ng_tim said:
Works great on my Diamond 2 with Dutty's rom, the only bad is the layout does not resize in landscape mode. But this is still good to use with.
Thanks for sharing!
Click to expand...
Click to collapse
added wvga files made with original htc files
kiay said:
will there be supporting simplified chinese as well? thx in advance~
Cheers,
Kiay
Click to expand...
Click to collapse
there is simplified chinese handwriting option, but not with pinyin or stroke, sorry. maybe there is a htc ezinput chs.
HTCFramework, Shared Modules, SharedResource
where can i find these 3 cab? been googled for whole day and no luck
I have this problem when i go to the Ezinput SIP Menu the only option is Touch input and i can't select anything else like zhuyin, pinyin, english, stroke and handwriting but randomly cangjie is working when i tap on the only option the touch input and i can also switch to english thats all i can do. Does anyone know what to do in order to switch to other inputs? Using HTC Raphael 100 with The Captain's Special WM6.5 Build 21889+Sense 2.5. Thanks in advance.
Hi Ben([email protected]), if you have the Ezinput menu popping up when u press the keyboard thing at the bottom of the screen, you will get a setting called "Input method" and you can choose there. If you can't find it/don't get what I'm saying I'll show you at school on Friday.
Now, my own question.
After I install it on my DIAM100 with Gen.Y D2X Rom all I see is static when the keyboard is enabled? Is anyone else experiencing the same problem?
I need the QVGA one,thank you I you can do it
darkspearxz said:
After I install it on my DIAM100 with Gen.Y D2X Rom all I see is static when the keyboard is enabled? Is anyone else experiencing the same problem?
Click to expand...
Click to collapse
What do you mean by static?
NOX | 21895 + 23547
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please visit topaz.inselsta.at for further informations!!
Kitchen is availiable!
It's amazing!
Can you make the WWE version?
I'm sorry, not for this Rom...
Maybe for the next.. it would be some work to change everything which is now only in german.
My plans are to make a multi-language-rom in the future, ut i don't know when i can find the time to work on it.
But thank you for your interest
Inselstaat
Thank you, man!
You are a kind man~
Perfect! Searched a long time for a German 23547 kitchen
Really nice, looking forward to get the kitchens.
Read your blogs, hope I can learn something again
And if it is ok for you, I will host the files on my mirror as well.
@BeeGee: A mirror would be great
@both of you: i will upload the kitchen on monday
Hope it will be good
In my roms now i forgot to compress the png's in the kitchen this will already be done.
And if i have the time i will write a short pdf for the Ervius Kitchen and for creating OEM-Packages from CABs. (It's not really difficult, but if you just started rom cooking it will be easier)
Thank you for your interest!
Inselstaat
-> Suggestions are welcome!
looks good - will give it a try
inselstaat said:
@BeeGee: A mirror would be great
@both of you: i will upload the kitchen on monday
Hope it will be good
In my roms now i forgot to compress the png's in the kitchen this will already be done.
And if i have the time i will write a short pdf for the Ervius Kitchen and for creating OEM-Packages from CABs. (It's not really difficult, but if you just started rom cooking it will be easier)
Thank you for your interest!
Inselstaat
-> Suggestions are welcome!
Click to expand...
Click to collapse
Mirror:
Code:
[URL="http://www.htc-topaz.co.cc/diskstation.html"]BeeGee's Disk Station (faster)[/URL] User [I][COLOR="Red"]xda[/COLOR][/I] Password [I][COLOR="Red"]xda[/COLOR][/I] =>Cooked_ROMs=>WM6.5=>Inselstaat
[URL="http://www.htc-topaz.co.cc/website.html"]Topaz File Mirror (HTTP access)[/URL] =>Cooked_ROMs=>WM6.5=>Inselstaat
[URL="ftp://ftp.giesecke.tk"]FTP access[/URL] User [I][COLOR="Red"]xda[/COLOR][/I] Password [I][COLOR="Red"]xda[/COLOR][/I] =>Cooked_ROMs=>WM6.5=>Inselstaat
Hello there, the kitchen is know availiable!
Happy cooking
To create your own OEM-Packages quickly, download osKitchen 1.25 and go to "Convert". And follow the instructions on screen.
Inselstaat
Hm... Somehow I have some performance problems. It's laggy and freezes up my device
Great ROM - but some pitfalls to watch out
Hi all,
this is the best German 6.5 ROM I have seen so far.
During my setup, I still found some pitfalls, which I would like to avoid aother people to step in:
(a) do not use a cab called "mobireg111wm" - this lets your td2 go into a endless boot cycle where only a hardreset lets you escape
(b) when working with a registery editor like "Diamond Tweak" - e.g. to switch off the anyoing boot sound, the taskmanager vanishes. This can be solved via re-installation and seems to be a known issue (see showthread.php?t=614172 .
Last, I can only recommend to use a cab to allow automatic landscape switching (forum.xda-developers.com/attachment.php?attachmentid=279556&d=1265874407).
Thanks again for the good work - two thumbs up.
Cheers, Math
Do not set a PIN
I have tried to set a PIN to lock the device and ended up being not able to unlock it.
A "small" pinpad is shown and hitting confirm after pin entry just did nothing.
So I had to reflash the rom.
Thats a known issue for the HD mini Lockscreen. Several guys had the same issue on Rhodiums I had to reflash my colleagues Topaz yesterday as well.
But this brings up my question: How to enable the slide lock in this ROM? Just flashed it on a colleagues Topaz and can't find the settings for it. On my Rhodium it's under Settings -> System -> Smart Lock. Where do I find it here?
Thank you!
I think the normal lockscreen has been removed in this ROM.
Following the link in the first post you can find a list of removed and added packages (only in german).
Sorry, but I am not permitted to post links.
alfish2000 said:
I think the normal lockscreen has been removed in this ROM.
Following the link in the first post you can find a list of removed and added packages (only in german).
Sorry, but I am not permitted to post links.
Click to expand...
Click to collapse
It's not removed, if you hit Start and press the little Lock in the lower left corner it is locked with the HD mini lockscreen. But I don't know how to set it up to lock the phone on suspend.
Mad Marc said:
It's not removed, if you hit Start and press the little Lock in the lower left corner it is locked with the HD mini lockscreen. But I don't know how to set it up to lock the phone on suspend.
Click to expand...
Click to collapse
Hi...
try solution from this post... (found with google )
http://forum.xda-developers.com/showpost.php?p=5419580&postcount=8
-bl4ckb1rd
Mad Marc said:
On my Rhodium it's under Settings -> System -> Smart Lock. Where do I find it here?
Click to expand...
Click to collapse
bl4ckb1rd said:
Hi...
try solution from this post... (found with google )
http://forum.xda-developers.com/showpost.php?p=5419580&postcount=8
-bl4ckb1rd
Click to expand...
Click to collapse
Thank you! Thats exactly the version I use on my Rhodium. Just mailed it to my colleague, lets see if it works!
Problems with Swype
1) I want to enter the number "3" on the swype SIP included in this ROM but I get a "%" character.
2) The swype SIP is not really aware of WM6.5.5. It "overlaps" the taskbar a little.
3) It takes some time until the swype SIP is shown. The other SIPs like QUERTZ appear immediately.
Has anybody observed the same issues or maybe knows how to fix them.
Thanks in advance.
I have also exaclty the same problems, but this must be a problem of Swype/HTC Messaging.
This Swype was taken from the Leo and i think on the Leo it will work well, but we only have 528Mhz.
The problem with the "3" is known i think, but i did not search for a solution yet.
And i also tried position fix for 6.5.5, but i did not find the right windows class for this Swype popup.
Maybe you could also search a little bit for yourself and share your experiences oder solutions
Thank you!