Related
I am looking for a newer bricked(totally completely useless) T-Mobile MDA like my avatar for cheap and in reasonable physical shape so I can fix my MDA. The housing is totally dinged and scratched on my phone and the screen has a nasty scratch on it that is rediculously visible.
If anyone has one of these, please let me know.
Thanks, Dan.
Housings have got a lot cheaper on eBay now, used to be about £40, now down to about £24-£30 shipped. These are original "as new" removed from returned phones, I've never seen a non-OEM housing. Touch screen about £10 shipped from HK. I doubt you'll be able to buy even a bricked Wizard for £34-£40 so it might be the way to go.
First thing I did was drop my Wizard so the chip has been staring me in the face every day since. I'll wait for a few more dings before I part with any cash. A screen protector from poundland was a great investment though!
Edit: Sorry, see you're in the States so double those numbers...
I bought a couple of housings recently. Things to be wary of:
1) The OEM case I bought came without an antenna glued to the top back piece, and was missing little pieces of plastic for holding the stylus in, etc. As a result it would have taken a HUGE amount of work to rebuild the case.
2) I bought an 'As New' housing from a reclaimed phone, and it was FAR from as new. It looked far worse than my current housing, so I sent it back.
I'll start this thread in the hope that there'll be some good news soon.
I got my Touch Cruise on Friday and the device is absolutely fantastic but there is one huge problem with it. Using it either with the bare screen or with the screen protector supplied in the box, the smudges that get onto the screen are a real issue. It's not a case of cleaning it every day when you get home, it really is a case of pulling out a perfectly clean device, flicking up the cube to fire up the calculator, doing 60 seconds of calculations and then putting it away and even after that the screen is covered with smudges to an extent that bugs me. The saving grace is that, if a good screen protector can help solve this problem, then it's easy to apply as an aftermarket solution.
Do other people see the issue to the extent I do? (And my hands are actually fairly dry, I often have issues getting through fingerprint recognition at US immigration because there isn't enough grease on my fingertips.)
I'm told that Brando are working on a protector and I just had a quick play with my old O2 XDA Orbit which has a good screen protector on it (not a Brando but one of their big competitors whose name I forget but is another make that people tend to recommend) and it seemed to me that it was picking up far less muck than my TC one so maybe Brando or someone can ride to the rescue on this one.
- Julian
There is another thread about screen protectors here.
I use the supplied one without any problems different from any protector I have used. Just get the Veripart screen cleaner and clean your screen with it about once a week. looks like it leaves a coating on the screen. I am not sure about that, but my screen is shiny and nice
By the way, how can you get smuges from a non-greay finger
victoradjei said:
There is another thread about screen protectors here.
Click to expand...
Click to collapse
Ah. Thanks for that. I was trying to do the right thing by posting into the "Accessories" sub-forum so that is where I looked for a previous thread but I did just find the other thread in the main Polaris forum, funnily enough not by looking through the forums but because that thread is the second hit on Google when I did a global search for "veripart screen cleaner" as a result of your reply. I'll definitely try Veripart.
Re: "how can you get smuges from a non-greay finger", I guess they're not totally non-greasy, just less greasy than average .
I'll still get a new screen protector for my TC though because the one that came with my device seems to have a little bit of adhesive missing right down in the bottom left corner, luckily only on the bit that covers the screen surround but, because it won't stick down, it makes it look as if there is a water stain on the device. I also find that the factory screen protector does dull the sensitivity of the screen a bit.
- Julian
I have the same problem with the supplied screen protector.
I found out that Brando will come out with two types of screen proctectors of which on is anti-glare. That's the one I want to try.
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
ingenious said:
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
Click to expand...
Click to collapse
It looks very interesting. I hope it works out for you. I'll look forward to hearing how it works.
I just experimented some more with my old (now dead) Artemis. Obviously with the device being dead all I can do is wipe my fingers and thumb around the screen with it switched off and then look at how marked it is. This is actually just fine though because the marks show up most when the device is off so the fact that the device doesn't power on isn't really an issue for these tests!
Anyway, I found the email confirmation for when I first placed the order and it was a Martin Fields Overlay Plus Screen Protector and my experiments above confirm in my mind that a good screen protector does make a huge difference as far as fingermarks are concerned, my old Artemis with the Martin Fields protector seems to pick up maybe 10% of the fingerprints compared to the in-the-box HTC protector on my Touch Cruise under about the same amount of finger dragging on each screen.
- Julian
Brando is now selling the antiglare screen protectors. Emailed them and they said that they cover the whole face, not just the touch screen portion. You can get them here:
http://shop.brando.com.hk/prod_detail.php?prod_id=02323&dept_id=&cat_id=0019
db
No, I'm not buying before I see it how it looks like. As I wrote above, I ordered one from eBay. It is 0.5mm more narrow than the screen area. But the worst is, there's not a hole in the surface for the secondary camera - there's a whole area cut out, like with scissors. Otherwise, the surface seems pretty diffuse. I haven't tried it yet, because if I remove and ruin my current protector and I don't like the new one, I won't have any
So I'm waiting for responses/pics from other protectors
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
dcbehan said:
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
Click to expand...
Click to collapse
I bought one from Brando's for my Orbit 2.
Quality is top as usual.
But:
I think they do the large cutout to make them fit to both, the cruise and the orbit 2.
The result is: You can use them for both device, but they do fit perfect neither for the polaris nor for the orbit 2.
Especially with the orbit 2 there is a large gap at the top of the protected area.
So I have to say, I was used to get better quality from brando's
JueLue
Shame, shame... Hopefully they will make them better at some point. Now I don't want to put mine because I'm afraid that if I don't like it, I won't be able to put the original one again
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
xrrkrrkx said:
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
Click to expand...
Click to collapse
Thanks. Look forward to your post as my standard protectors's already looking suspect.
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
I've first put the one delivered by HTC with the Polaris. Except the fact that the sticker perfectly match with the Polaris Form, it need to be cleaned at least 50x per day..
I've finally buy a set of universal screen protector. Of course you've to cut it by yourself, but the quality is pretty excellent and the price is really competitive (5 pieces for a price less than for 1 brando).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
Why the HTC ones rather than the Brando Ultraclear? The thing I hate about the HTC protector is that it is no better than a bare screen as far as fingerprints are concerned. There is a thread running in the main Polaris forum (although a request has been made to the moderators to move it here) where other people are confirming how awful the HTC protector is re fingerpriints and also that the Brando UltraClear, although not as good as the AntiGlare regarding resistance to fingerprints, is a definite improvement on the HTC protector.
I confess that I'm still using the HTC protector but that's because I put it on my device immediately and now it's on I'm waiting a bit to decide what to replace it with. I don't like the Brando cutout but I think if pushed now I'd probably buy one of each Brando and see if I could live with the optical distortions of the AntiGlare and, if not, then use the UltraClear.
- Julian
P.S. I share your frustration re fitting these things; one of my least favorite activities.
I didn't try the Brando 'ultraclear' one -- I guess because I used one of these on a PDA years ago and found it to be 'ultraglare'. If I were sitting anywhere near sunlight, the screen became a mirror.
I suppose in the time since that's just become normal, as screens like the Touch Cruise are very shiny.
Looking at the various posts I think I'll go with the Brando UltraClear...
10$ + 3$ shipping is not so expensive (let's hope it will not be trapped by customs, in France that's pretty expensive even for a 10$ order).
Anyone aware about a way to get them from a European reseller instead of ordering directly to Brando in HK?
Thanks
DuraSec protectors
Hello all....
as i promised earlier i would report back once i got my DuraSec protectors and let you know how they are.
i just got them last night, so i ripped my HTC OEM one off, and put the cheaper "ClearTec" one on. on first impression, it is a slight bit TOO thin, as it is quite hard to get on without flipping and flopping around. Which in the end causes many small bubbles.
After some fiddling, i have it on looking semi-OK, and it doesnt mess with the screen clarity, nor refract light in any strange way that i can tell.
i do have a feeling that it will not last very long... but then again they market it as a temp. protector.
i will get back when i use the "HighTec".....
This is a possible way to improve the standard HTC screen protector which I'm pretty happy with except for one big issue, it offers absolutely no additional resistance against getting fingerprints all over the screen when not using the stylus and this is a big frustration for me.
Recently I decided to clean my protector using regular window cleaner that you can buy in supermarkets (I'm in the UK so I used "Non smear Windolene for glass and shiny surfaces"). I now only bother to wipe down the screen with a cloth every few days rather than after every few minutes of use which is what I had to do before (and yes, I do wash my hands very regularly!).
It's probably partly due to the fact that I've got better at remembering to try to use the fingernail side of my fingers rather than my fingertips but I think that a large part of it is due to the cleaner leaving some sort of coating because even when I deliberately do a few swipes with my thumb, which before would have left marks after even a single swipe, it is now pretty clear.
I didn't spray the cleaner straight onto the device by the way, that just seemed too risky, so I sprayed it onto a paper kitchen towel and then used that to apply the cleaner onto the screen.
For me I think this has improved things sufficiently that I might well just stay with the supplied protector.
- Julian
Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.
Ok, firstly I'll admit that I suffer from a certain level of OCD when it comes to phones. I ordered a GPE last week and was very impressed with the phone. The size is a bit large, but everything else, except for the camera, is phenomenal with this phone.
However, about one week after I got the phone, I noticed what can best be described as a smudge on the front lower right corner, about the radius of a quarter. Granted, since it is at the corner, the total size would be a quarter of a quarter. Anyway, it is usually hard to see it unless you run your finger over the area, whereby the spot becomes clearly visible. I don't know if it is a scratch on the screen protector, but I can't feel any texture and light doesn't seem to show any micro abrasions. It almost seems to be under the screen protector.
Anyway, the unit also had a weird creak on the back of the phone (pressing it in an area would make the phone creak), so I asked for a replacement unit. I got it yesterday and what do you know, the smudge is there on the new unit, too! So my question to other Z Ultra owners is whether this is a common thing and secondly, whether it is an issue with the screen protector only, not some damage to the screen.
The best way I can describe it is as if someone applied pressure on the corner leaving a mark. Again, it is really hard to see if the screen is clean, but becomes easily visible if you smudge the corner with your finger - a clearly visible quarter-circle will become visible if your phone is like mine. Thanks for your help. BTW, I'm going to keep my phone unless it turns out that the smudge is some kind of pressure damage.
The anti finger print coating wears off real fast on the xzu, only way to solve this is to either remove the sony screen protector or apply another screen protector on top of it. Mine wore out in a week, and your replacement gpu is most likely a used defective unit being refurbished. The reason why the smudge is on the lower right corner is because that's the area you use most often....for scrolling and unlocking the screen, hence the wear out
beerope said:
The anti finger print coating wears off real fast on the xzu, only way to solve this is to either remove the sony screen protector or apply another screen protector on top of it. Mine wore out in a week, and your replacement gpu is most likely a used defective unit being refurbished. The reason why the smudge is on the lower right corner is because that's the area you use most often....for scrolling and unlocking the screen, hence the wear out
Click to expand...
Click to collapse
This.
beerope said:
The anti finger print coating wears off real fast on the xzu, only way to solve this is to either remove the sony screen protector or apply another screen protector on top of it. Mine wore out in a week, and your replacement gpu is most likely a used defective unit being refurbished. The reason why the smudge is on the lower right corner is because that's the area you use most often....for scrolling and unlocking the screen, hence the wear out
Click to expand...
Click to collapse
I'm not so sure my replacement unit is a refurbished one. I believe Google has a policy to replace phones with new devices. Also, it is basically the exact place and shape as the smudge on my previous phone, and this unit has been used for only a bit more than 24 hours. The smudge starts at the lower right corner of the glass on the front of the device and goes as far as barely short of the actual display portion of the glass slab.
With sample of two devices, it seems to be a result of the manufacturing process because the two are so similar. Just weird. I guess if it really gets under my skin I'll try to remove the film.
I had the same thing, only in the lower left corner, but i got my screen replaced (for a different reason), and the screen protector i got on the new display is looking good. It's only the oleophobic coating that's wearing off, but i understand how that can be incredible annoying.
jokrak said:
I'm not so sure my replacement unit is a refurbished one. I believe Google has a policy to replace phones with new devices. Also, it is basically the exact place and shape as the smudge on my previous phone, and this unit has been used for only a bit more than 24 hours. The smudge starts at the lower right corner of the glass on the front of the device and goes as far as barely short of the actual display portion of the glass slab.
With sample of two devices, it seems to be a result of the manufacturing process because the two are so similar. Just weird. I guess if it really gets under my skin I'll try to remove the film.
Click to expand...
Click to collapse
Believe what you want to believe. Although I'm telling you its a used device...do you really think they'll thrash all units sent back and dispatch new ones every time someone RMA their phone. Anyways, the solution have been stated out for you, choose what floats your boat
LordManhattan said:
I had the same thing, only in the lower left corner, but i got my screen replaced (for a different reason), and the screen protector i got on the new display is looking good. It's only the oleophobic coating that's wearing off, but i understand how that can be incredible annoying.
Click to expand...
Click to collapse
I suppose that theory is as good as any. Nice device anyway. Thanks for the reply!
Yes you can hide it.
apply any screen protector on top. The sh!tty smudge will not visible any more.
Sorry to necro this old thread.
I just wanted to add that I have the exact same issue. Noticed it today while going to show someone it.
I've been babying the heck out of the phone to prevent this issue, but unfortunately my screen protector and case won't show up until a few days from now.
I'm hoping applying the screen protector over it is all I need to do.
I figured I'd post in this thread in case someone else also had this issue and was unaware of this common issue.
Smudge in up left corner
Hi.Just bought this phone and when i clean the screen from fingerprints i see a smudge or mark or whatever its called about 1 x 1 cm in the left up corner.Is it normal?
If you look carefully it seems to be from inside and it doesnt leave.You can see it better only when you pass over it with a towel while cleaning the screen.
Is it something with antistutter film?Warranty covers it?
Thanks in advance
I have it also, 1 day old phone. Hard to believe it is wear.
stewwmann said:
I have it also, 1 day old phone. Hard to believe it is wear.
Click to expand...
Click to collapse
I found a solution. I returned the phone back to the shop i bought it, i took back my money and i just ordered it from another shop.
:laugh::silly:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
GrandMasterPlank said:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
Click to expand...
Click to collapse
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
honorable said:
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
Click to expand...
Click to collapse
Thanks dude, much appreciated. I was into it until you started mentioning removing parts by heating them up then thought I'll leave it to the experts. :laugh: Honor UK have quoted me £80 as it's a pretty clean break so I'm going to give them a go and see what they say. If they do the same as they did for you, which they said they wouldn't!, then I'll go with that. Will let you know.
I'm surprised their aren't more threads on hear about replacing screens because this phone does feel fragile despite being reasonably weighty so I'd have thought there'd be loads of cracked screens out there. I dropped my old S5 a couple of times from higher up and the screen survived both times. Am now thinking a tempered glass protector might be in order for the 7 :fingers-crossed:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
honorable said:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
Click to expand...
Click to collapse
After reading reviews of the official Honor repair company, SBE Limited, and how they appear to be happy to scam people I thought I'd have a go myself. So I bought a replacement front glass and thought I'd give it a go.
Dissembling the phone is really easy, once you've got the hang of the clips holding the back on, and taking it all apart was easy. What wasn't so easy (read nigh-on impossible) is separating the front glass from the digitiser. I tried and tried and in the end the touch screen just split into a number of layers so I'll need to order the complete screen assembly. My concern is you mentioned you bought one off ebay and it wasn't as bright as the original. From this I'm guessing it wasn't an original screen? I'd like to get an original if I can. Do you have a link to the one you bought? How long did it take coming from China?
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
boroleigh said:
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
Click to expand...
Click to collapse
Thanks for the nod. Tried it but no joy. For some reason they don't support the Honor 7. Very Huawei tbh, they're left hand doesn't know what the right is doing. A bit all over the place.
honorable said:
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
Click to expand...
Click to collapse
Great stuff, have just ordered the last one they had in stock in they're in France also, so should be quicker than coming from Hong Kong. Funny thing is I hadn't seen their add before, it hadn't come up with my ebay search for 'Honor 7 replacement screen'. Without having the name I'd not have found it and paid more so thanks again! :good:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
Click to expand...
Click to collapse
Great tips, thanks again. I'll be sorting it as soon as it arrives. Will report on how I get on.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.......
Click to expand...
Click to collapse
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
GrandMasterPlank said:
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
Click to expand...
Click to collapse
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
honorable said:
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
Click to expand...
Click to collapse
The screen and housing isn't original Huawei, it's a pattern unit but tbh it looks totally identical in use, no less dim than the original screen. There's also no bleed at all. There weren't any hollows and slots to fill with card under the battery. The only hollow was at the base of the battery as it sat slightly higher up (towards the top of the phone when laid flat) in the casing so I filled that with folded card.
The only slight issue is that the screen shape (rounded corners of the glass) when looking at the phone from the front doesn't fit into the corners of the casing absolutely perfectly. Tbh only a phone nut would notice it, wouldn't be an issue to anyone else.