Hi There
I'm now running the original but updatet T-Mobile version but i'd like to upgrade to WM6. unless it's her in german i'd like to have a possibility to downgrade again!
Can i just flash the old t-mobile files if i'm mad of rading english all day long??
Or will i need special rom to reflash WM5??
YOur's
Seppel
you can downgrade to whatever WM5 rom you like.
Cheers,
vlodeck.
Downgradeing problem
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
cody28 said:
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
Click to expand...
Click to collapse
I used the german AKU3.3 ROM and it showed 'Upgrade from V4.0.0.0 to V3.3.0.0'.
Maybe you have used an old AKU2.x ROM to downgrade?
And... try downgrading in bootloader mode (hold tape button while soft-reset until colored bars are shown, but you need different active-sync drivers for bootloader mode)
downgade problem
I succed to downdrade to germab t-mobile rom but i need a wwe rom ,i'm not familiar with german language,and the uk roms just don,t work .update error.
Once you upgraded to AKU 3.3 you cant go back to AKU2. The only thing that could help is flashing the prophet rom but it can be dangerous. Search the prophet section if you want to do it.
Hi vlodeck
I upgraded already to aku3, but i would like to upgrade to wm6
do you know a good way to do so ?
downgrading to aku2 does not work - as you said!
regards
use
BootLoader.exe anywhere (ïîìîåìó) Forum
hmm ... didn´t find a description what to do, but tried to downgrade back to orginal aku2 in bootloader mode:
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get newer NBF file.
How to downgrade 38221_382116_026921_TMO_UK_WWE_Ship
(SPL 3.08.0001) back to orginal 1120223_11202110_11220_T-MobileUK_Ship ?
Related
Haven't installed it yet, but the official (WM5) Orange SPV M3100 upgrade is at http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
yes !!!!! it will be the good time, after 5 months, for my update problems dear pof ? Thanks
Downloading!
This is exciting, but i'm afraid to replace the WM6 I have on my M3100...
Would this remove the superCID etc?
Any news on what radio is in there (if any)
ORANGE M3100 Official Update is here!
Anyone installed this yet from the Orange website? If so, how does it compare?
Mark.
I'm currently using a french orange 3100. if i install this english rom will my OS change to english (i want it in englis but dont want wm6 just yet))
I'm assuming after installing it i have to use one of the keyboard hacks and change my internet setting/
OK : Just did a quick test....
Radio : 1.38.00.01
Protocol : 32.71.7020.12H
Rom : 2.11.61.6 (23/3/07)
Build : 15673.3.3.1
ipl : 1.01
spl : 1.09
Interesting the radio is 1.38.00.0.1 - i.e. quite old. I wonder if this has been tweaked for Orange - it's the same as the one in the French rom. I might try installing this radio to see how it goes.
Woop Woop,
This Is What I've Been Waiting For.
@jpxdude No It Won't Replace Your SuperCID
No More Warranty Issues.
Cheers
http://www.megaupload.com/?d=Q9YR81AS
Extracted .nbh File And Packaged With Olipros RUU Wrapper
Cannt install this update from Black 2.5
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
mishu said:
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
Click to expand...
Click to collapse
erm ..... "official (WM5) Orange SPV M3100 upgrade " ..... the (WM5) is a clue here
So it is a WM5 upgrade?! Thanks, but no thanks, I am a WM6 addicted!
petes said:
OK : Just did a quick test....
Radio : 1.38.00.01
Protocol : 32.71.7020.12H
Rom : 2.11.61.6 (23/3/07)
Build : 15673.3.3.1
ipl : 1.01
spl : 1.09
Interesting the radio is 1.38.00.0.1 - i.e. quite old. I wonder if this has been tweaked for Orange - it's the same as the one in the French rom. I might try installing this radio to see how it goes.
Click to expand...
Click to collapse
My device is reporting 2.11.61.1 (23/3/07), Operator version 14.211.1.611.
If you tell me how to work out the Ext. Rom version number I'll have a look and report that too.
so what rom would i need to install first in order to be able to install this update??? i am running black 2.5 also but want to go back to the orange preloaded version.
mishu said:
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
Click to expand...
Click to collapse
I have the same error as well. Is it because I have used hermes unlocker v3a to my M3100?
all those with 26x error, not able to update... extract the NBH file from the rom, then use CustomRUU (see stickies) to flash it.
petes said:
erm ..... "official (WM5) Orange SPV M3100 upgrade " ..... the (WM5) is a clue here
Click to expand...
Click to collapse
@PETE that is not the reason the upgrade is not running. He can just FLASH Olipro1.10 which is 1.04 based then flash this ROM. However the 260error is not coming from the device. It is coming from the PC. I do not have a VISTA machine so maybe someone else shed some light. He should also search the threads for that error because it has been mentioned numerous times before.
stukes said:
@PETE that is not the reason the upgrade is not running. He can just FLASH Olipro1.10 which is 1.04 based then flash this ROM. However the 260error is not coming from the device. It is coming from the PC. I do not have a VISTA machine so maybe someone else shed some light. He should also search the threads for that error because it has been mentioned numerous times before.
Click to expand...
Click to collapse
Sorry - I guess I should have been more clear - my WM5 comment was in response to his question "BTW, it is a WM6 ROM?"
darrellr said:
My device is reporting 2.11.61.1 (23/3/07), Operator version 14.211.1.611.
If you tell me how to work out the Ext. Rom version number I'll have a look and report that too.
Click to expand...
Click to collapse
Doh - fat fingers on my part - it's 2.11.61.1 as you say. Apologies.
[Help] ROM upgrade error
I tried to install the new M3100 ROM downloaded from the Orange page, and at the step before the M3100's screen goes tricolor, it got resetted and disconnected from my PC. The next thing I know I got an error saying "Your phone is not connected to your PC blah blah". Am I missing something here?
P.S: I dont have a craddle, the phone is connected using USB cable.
Have you done any upgrades on the device at all?? (such as HardSPL or a new radio)
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Bram87 said:
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Click to expand...
Click to collapse
Well, this is not EXACTLY correct. Check out THIS LINK for downgrade directions. You will need to get the original ROM from somewhere. It is possible that it is HERE IN THE WIKI. Chances are that one of the files there has the same Radio, IPL & SPL. You will just need to find the OS, if it is not in there. (In fact, based on the specs, it looks like the third from the bottom of the English ones - Vodafone?) To flash, you will need dutty's good nbh tool to unpack the ROM, becuase you will need to do the IPL and SPL separately from the OS and radio. See THIS LINK for that info. If you don't want to get into all the unpacking, you *could* do the SPL downgrade first, then the upgrade, but it is generally good practice to downgrade SPL as a LAST step since you lose the hardspl protection as soon as you do it. Finally, use the google search link in my signature if you need to find anything else. Good luck.
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Like Todd said it is possible.
Check out the links in my signature and read alot before actually doing so.....
That is a practice tip
The Mr VanX guide alias HTC Hermes guide has complete steps to do this!
Good Luck
Ok, tell me if i correctly understand..
I found the correct rom, after i have to unpack this rom with dutty's good nbh tool..(i have to remove Ipl & Spl?).
After the unpack i have to pack again the rom without ipl and spl and flash it in my Herm??!!is it correct? And in the end i have to change ipl and spl(is it a down grade?).
Last questions yet,
What i have to verify first that i start all this work on my herm to not brick my Herm?
Thank you to all again for the help that you are giving to me
All the best
I may have made it more complicated. That is the process I use.
Best thing to do is simply follow Mrvanx guides.
First downgrade the OS/Radio using THIS GUIDE
Then downgrade SPL/IPL using THIS GUIDE
That is all - as long as you have HardSPL, it is VERY hard to brick your device. So, do that last.
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
zetax said:
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
Click to expand...
Click to collapse
Yes. The only reason to remove HardSPL is for warranty. Just for clarification, there is no Hard IPL, only Hard SPL, but I know what you mean.
Basically, 99% of the time most of us flash we are only flashing OS or Radio. SPL and IPL don't change often. Most cooked ROMs are released as OS only.
Ah ok perfect, i'm not interested to the device warranty, because i bought it on ebay from Uk, and there is no warranty on my device, so i can only flash os without ipl and spl..
Thank you very much fo all the help
<< ZX >>
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
zetax said:
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
Click to expand...
Click to collapse
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
todd_jg said:
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
Click to expand...
Click to collapse
Todd, thanks very much, i didn't know that with winrar was possible to unpack an .exe file,now i have all i need to flash my device with the hold or the new vodafone uk rom.
Tnx my friend
I have done the flashing, it works perfect.. now i learn the way, i can flash every kind of Os in my tytn following this way?for example o2(Uk) os can be put in my device?
Where here in xda forum can i find the software(for eample the software that shaps have included in his Os) for my device customization?like today home,weather widget, or the automatic operator configurator etc etc?
Tnx todd
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Hello,
here looking after these Rome.
-- Qtek 2.20.739 GER, NVID
flashe it easy and (should work)
search then you the following things
-- SoftSPL
-- HardSPL
when you now without the SPL change want another rom-tuned want (WM6.1) use SoftSPL
-- Root copy
-- SPL Play
-- White screen
now connect USB and the right Upgrade_RUU.exe start (G3 or G4)
then about 10 to 15 minutes and wait for the new rom is installed.
You do not want any flash before the SoftSPL you can run on the first white screen and flash HardSPL.
Then, only the need to update / upgrades.
Download HardSPL and SoftSPL:
SPL variants
Hi!
Try this rom http://files.mail.ru/HZUAH1
It is an original shipped rom. It TAKES A WHILE TO INSTALL,but it worked for me.
If you have not already upgraded your IPL to 2.20 than check your device type, G3 or G4 http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Next upgrade your IPL http://forum.xda-developers.com/showthread.php?t=315016
Now try some 6.1 roms.
It worked for me.
Hope this helps.
Daravong said:
Hi there i'm from Cambodia!
I got the problem after finished upgrading rom. Everytime I've finished upgrading my prophet doesn't upgrade to the new rom. It's still the same rom as before(My old rom is wm5), and sometime it's appear only three colors.
Does anyone of you know why my prophet can't upgrade to wm6 anymore?
Thank inadvance
Click to expand...
Click to collapse
why didn't you read the sticky threads?
dioxda2 said:
why didn't you read the sticky threads?
Click to expand...
Click to collapse
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Daravong said:
Thanks all you guys and Dioxda2
Everything now working fine for my prophet. Does anyone of you know why I can't Downgrade to Original rom Xda neo (02 Germany)? Everytime I downgrade always show the message
ERROR[206]: UPGRADE ONLY
This NBF file can not be used for your PDA phone. Please get newer NBF file.
Any recommend would be appreciated.
Thanks again.
Click to expand...
Click to collapse
hardspl your device.
it should be work.
varanusvincent said:
hardspl your device.
it should be work.
Click to expand...
Click to collapse
Wow Varanusvincent You are da best. Now I can downgrade to original rom.
Thanks you very much
I have the 3.14 ROM with 3.03.000 SPL installed on my HD2
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
I read through a lot of Forums indicating that this can only be done if you flash an older ROM to phone, hence overwriting the 3.03 SPL.
Tried downloading one of the older stock roms (1.66 and 1.48) and then attemped to flash via SD and through the .exe file directly.
Heres what happened:
----------------------
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
At first I thought it could be an incorrect ROM but I doublechecked it.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with various types of Mem cards but no luck.
I then tried SSPL with 1.66 and 1.48 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08? Not sure if this will actually help.
Not sure what exactly i`m doing wrong here.
xcsi said:
Not sure what exactly i`m doing wrong here.
Click to expand...
Click to collapse
simple, you're using the wrong rom. It isnt just any stock rom, its a stock rom that is correct for your phone you need. so for example if its locked to orange france, you would need the orange FRA rom, if the phone came from o2 uk its the WWE O2 UK rom you need.
dont be confused by a phone that has been sim unlocked, it would still be rom locked.
Hi.
Just did this yesterday.
All you have to do is check the version installed.
Mine was 3.14.479.2 which is Eastern Europe.
So i downloaded the 1.66.479.2 and flashed.this flashed the 1.48 spl..
So problem solved.
forgot to mention the 3.14 it the rom version.the rest is region specific : in my case 479.2 means eastern europe.This is important.
Fox example i tried to flash WWE:1.66.405.2 (France Bouygues) but no luck. 0% and then error.
same problem - may be we need HSPL for SPL 3.03.0000
I experienced the same problem. may be we need HSPL for 3.03, or it is already available - i dont know....
Can anybody reply / answer / help us all who are having 3.03 and want to run NAND Android on their device ? ? ?
Thanks in anticipation.
Device Details :-
HTC HD2
OS 5.2.21913 (21913.5.0.94)
ROM 3.14.720.3 (04666) WWE
Radio 2.15.50.14
hello!
same problem for me
i search
when i found i come here for you tell
ankorez said:
hello!
same problem for me
i search
when i found i come here for you tell
Click to expand...
Click to collapse
Problem can easily be solved by installing the correct previous stock rom.
For example if you have now the 3.14.405.x stock rom you need to use previous version 1.66.405.x Red numbers need to be the same.
You can download the stock rom's on the HTC webpage, ore take a look here: http://forum.xda-developers.com/showthread.php?t=623283
thx i try it and i tell it
hi Guys, this is exactly what im trying to do, however ive come up against a big problem, im hopeing someone can help!!
My HD2 is a Orange one, currently on ROM 3.14.61.2 (04666) WWE, and im trying to downgrade it...
however i cant for the life of me find a rom that will work on this phone, i need something like 1.66.61.2
is there an obvious way around this??
just for reference im trying to install WP7 on it...
Try HSPL4
Hi uxu, i did yes but it doesnt seem to have made any difference!
darkcat_systems said:
Hi uxu, i did yes but it doesnt seem to have made any difference!
Click to expand...
Click to collapse
So downgrading to HSPL 2.08 didn't work ?
Ahh, dont worry i have got it working now!!
look like i had an iffy usb cable which was stopping HSPL4 from connecting correctly.
All sorted and WP7 now running, though after all that i dont think i like it!!!