Hello im desperate
I want to root this phone from my girlfriend, it's new i installed Jelly bean. This process was ok without problems, but when i installed a bin when the phone was flashing to make the root, the phone was bricked, with the figure of an death android with a red warning and without the capacity to flash with R&D test tool
The phone is unable to recognize the phone through drivers with following message:
Problem with communication between cell phone and PC and:
[C:\LGMobileUpgrade] Try to delete folder
22:29:57 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
22:29:57 : Start Date : 2013-05-13 22:29:57
22:29:57 : ---------- QM Testmode ---------
22:29:57 : ***** Check Tool Version *****
22:29:57 : Tool version : 1.5.4.8
22:29:57 : UpgradeDLL version : 1.2.6.7
22:29:57 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:29:57 : LGE USB Driver Version : 4.9.8.1
22:29:57 : Android PDLV Version :
22:29:57 : Android NDLV Version : 3.8.0.0
22:29:57 : ******************************************
22:29:57 : SmartPhone_Normal upgrade.
22:29:58 : SetEmerModeAT()
22:29:58 : _IsConnectedPhone Call
22:30:07 : _IsConnectedPhone(0)
22:30:07 : 0 - NotConnected.
22:30:07 : 1 - Normal connect success
22:30:07 : 2 - Emergency connect success
22:30:07 : *****CheckOS Start********
22:30:07 : Microsoft_Windows_XP_Professional_Service Pack 3
22:30:07 : *****CheckPCSyncPrograms Start*****
22:30:08 : PCSyncPrograms Not Found - OK and ready to upgrade
22:30:08 : Checking the connection with the cell phone...
22:30:08 : dwWaitResetTime(40000 ms)
22:30:09 : Phone Mode(2)
22:30:09 : *****GetPhoneType Start*****
22:30:13 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
22:30:13 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
22:30:13 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:30:13 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:30:13 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
What can i do?
I can enter to S/W UPGRADE but with the same results. If i press volume (+) Power and home appears me RECOVERY MODE (but i don't know what to do with this)
Can anyone helpme? My girlfrind is gonna kill me
God Bless to all and thanks a lot for your help. Im very grateful
Tavok said:
Hello im desperate
I want to root this phone from my girlfriend, it's new i installed Jelly bean. This process was ok without problems, but when i installed a bin when the phone was flashing to make the root, the phone was bricked, with the figure of an death android with a red warning and without the capacity to flash with R&D test tool
The phone is unable to recognize the phone through drivers with following message:
Problem with communication between cell phone and PC and:
[C:\LGMobileUpgrade] Try to delete folder
22:29:57 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
22:29:57 : Start Date : 2013-05-13 22:29:57
22:29:57 : ---------- QM Testmode ---------
22:29:57 : ***** Check Tool Version *****
22:29:57 : Tool version : 1.5.4.8
22:29:57 : UpgradeDLL version : 1.2.6.7
22:29:57 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:29:57 : LGE USB Driver Version : 4.9.8.1
22:29:57 : Android PDLV Version :
22:29:57 : Android NDLV Version : 3.8.0.0
22:29:57 : ******************************************
22:29:57 : SmartPhone_Normal upgrade.
22:29:58 : SetEmerModeAT()
22:29:58 : _IsConnectedPhone Call
22:30:07 : _IsConnectedPhone(0)
22:30:07 : 0 - NotConnected.
22:30:07 : 1 - Normal connect success
22:30:07 : 2 - Emergency connect success
22:30:07 : *****CheckOS Start********
22:30:07 : Microsoft_Windows_XP_Professional_Service Pack 3
22:30:07 : *****CheckPCSyncPrograms Start*****
22:30:08 : PCSyncPrograms Not Found - OK and ready to upgrade
22:30:08 : Checking the connection with the cell phone...
22:30:08 : dwWaitResetTime(40000 ms)
22:30:09 : Phone Mode(2)
22:30:09 : *****GetPhoneType Start*****
22:30:13 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
22:30:13 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
22:30:13 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:30:13 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:30:13 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
What can i do?
I can enter to S/W UPGRADE but with the same results. If i press volume (+) Power and home appears me RECOVERY MODE (but i don't know what to do with this)
Can anyone helpme? My girlfrind is gonna kill me
God Bless to all and thanks a lot for your help. Im very grateful
Click to expand...
Click to collapse
Dont think your girl's phone is bricked. Lelus might guide you tomorrow. Have faith.
Tavok said:
Hello im desperate
I want to root this phone from my girlfriend, it's new i installed Jelly bean. This process was ok without problems, but when i installed a bin when the phone was flashing to make the root, the phone was bricked, with the figure of an death android with a red warning and without the capacity to flash with R&D test tool
The phone is unable to recognize the phone through drivers with following message:
Problem with communication between cell phone and PC and:
[C:\LGMobileUpgrade] Try to delete folder
22:29:57 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
22:29:57 : Start Date : 2013-05-13 22:29:57
22:29:57 : ---------- QM Testmode ---------
22:29:57 : ***** Check Tool Version *****
22:29:57 : Tool version : 1.5.4.8
22:29:57 : UpgradeDLL version : 1.2.6.7
22:29:57 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:29:57 : LGE USB Driver Version : 4.9.8.1
22:29:57 : Android PDLV Version :
22:29:57 : Android NDLV Version : 3.8.0.0
22:29:57 : ******************************************
22:29:57 : SmartPhone_Normal upgrade.
22:29:58 : SetEmerModeAT()
22:29:58 : _IsConnectedPhone Call
22:30:07 : _IsConnectedPhone(0)
22:30:07 : 0 - NotConnected.
22:30:07 : 1 - Normal connect success
22:30:07 : 2 - Emergency connect success
22:30:07 : *****CheckOS Start********
22:30:07 : Microsoft_Windows_XP_Professional_Service Pack 3
22:30:07 : *****CheckPCSyncPrograms Start*****
22:30:08 : PCSyncPrograms Not Found - OK and ready to upgrade
22:30:08 : Checking the connection with the cell phone...
22:30:08 : dwWaitResetTime(40000 ms)
22:30:09 : Phone Mode(2)
22:30:09 : *****GetPhoneType Start*****
22:30:13 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
22:30:13 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
22:30:13 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:30:13 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:30:13 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
What can i do?
I can enter to S/W UPGRADE but with the same results. If i press volume (+) Power and home appears me RECOVERY MODE (but i don't know what to do with this)
Can anyone helpme? My girlfrind is gonna kill me
God Bless to all and thanks a lot for your help. Im very grateful
Click to expand...
Click to collapse
What phone model do you have? and what kdz do you have?
I have this
carloswii5 said:
What phone model do you have? and what kdz do you have?
Click to expand...
Click to collapse
I have a LG-P768 (L9)
And i have V20A_00.KDZ
Thanks for your time and for your answers again
Don't worry my friend. It doesn't matter if FOTA showing some error.
Did you install CWM recovery after installing JB ??
If YES then use this link restore your phone to ROM of your choice.
If NO then unlock bootloader, flash CWM recovery and then download and restore nandroid backup for your phone.
also while downloading nandroid backup ensure that it is meant for your phone model.
REMEMBER AWAYS MAKE CWM BACKSUP BEFORE DOING ANYTHING SILLY TO YOUR PHONE.
ok i make all steps,
installed the driver
C:\omap4boot
Then just appears in device manager it's ok so far
but when i go to adb devices appears me
List of devices attached
091476571101B016 RECOVERY
This is because my phone is with the death android wright?
Then type
C:Android\>adb reboot oem-unlock
restart the phone and the same death android appears
I use again R&D test tool with same results
THE USB cable and your cellphone are note connected
3:11:07 : _IsConnectedPhone(0)
03:11:07 : 0 - NotConnected.
03:11:07 : 1 - Normal connect success
03:11:07 : 2 - Emergency connect success
03:11:08 : _IsConnectedPhone Call
03:11:15 : _IsConnectedPhone(0)
03:11:15 : 0 - NotConnected.
03:11:15 : 1 - Normal connect success
03:11:15 : 2 - Emergency connect success
03:11:15 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
03:13:02 : Check Cancel button active..
03:13:02 : Check Cancel button active..
03:13:02 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
03:13:02 : Page_Error ºÎºÐÀÔ´Ï´Ù
03:13:02 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
03:13:02 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
What can i do wrong
Can anyone help me step by step im a newbie and stupid sorry and again thanks and sorry for my english
Problem fixed
Ok i leave this post to future customers of this great phone:
Ok i have 2 asus (Mine is P5QPL-VM) and other P-573 AM ok. I use mine to install all programs and kdz to this phone, at first all was seem so right, but in first place when i tried to make an emergency recover and wrote mi IMEI this program would not allow. Ok i was thinking that was a problem with LG server. Install a bin when i was flashing and there was the fatallity.
The cell appears me with an green dead android and when i try to flash it with R&D Tools suddenly in the 8% stops and the fckn text:
The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the Restart button.
OK doesn't recognize ok i unistall all drivers and programs from LG, i install again with same results i remove the battery presing volume (+) and connecting the USB cable and appears me the driver that suddenly desapears ok i install omap drivers with same result (doesn't recognize this phone) i use it Android_AIO_Flasher_1.40_by_Fonehacker trying to install a recovery (.img) from all reboot Menus possible i mean Normal, recovery, fast boot and nothing: Try unlock bootloader, flash CWM recovery, without success. I try with all again Lg programs to flash it but only remains disconected the phone.
My idea was trying all again but in other PC (P-573AM) not installing the phone, installing (ORIGINAL DRIVER FROM LG PAGE) i wait and install (HERRAMIENTA DE COMPATIBILIDAD DE TELEFONIA MOVIL LG) Connect the phone and when appear that driver willo not serve if not disconnected the phone i remove usb, then wait to all install i connect the USB again, goes to software upgrade, then to emergency mode, and THEN THE MAGIC APPEARS here in this PC, my IMEI automatically appears the just press ok and voila, the phone was recognized for the LG PROGRAM without stopping. Then just wait to upgrade was ready and THE PHONE WAS INTACT!!!!!!!!!!!!!! (And my balls too)
This problem was for ****n drivers.
I appreciate all viewers and (CHISPAS109, CARLOSWII, and ER.DAVINDER) for his knowledge and pacience and try to help users that was in a pannic just like me jajaja
I hope this helps other people good luck, blessings from my dear MEXICO CITY
Hello, I shall do my best to shortly and concisely lay out my difficulties. (It was a bad decision to try to install a custom ROM on the Monday before finals)
I was looking to put a custom ROM on my phone, and was following this guide. I put CWM on my phone via this method. I had the ROM I wanted on my SD card. I boot into CWM, wipe the davlek cache like a good little boy, wipe the system (yikes), and select the .zip I want. Nope, status 7 error, abort! Heart racing slightly, I quickly Google and find a nice solution. Problem! When I reboot back into CWM... there is no CWM, and I'm stuck with the useless stock recovery mode that literally does nothing but show a picture of a dead android on its side.
I'm having issues with the offline installer. I've tried both the automated method and doing it myself but really nothing seems to be getting around the fact that my computer doesn't want to talk to my windows 8 computer, or my friend's windows 7 computer.
Here's some log output:
Code:
16:09:25 : [C:\LGMobileUpgrade] Try to delete folder
16:09:25 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
16:09:25 : Start Date : 2014-03-10 16:09:25
16:09:25 : ---------- QM Testmode ---------
16:09:25 : ***** Check Tool Version *****
16:09:25 : Tool version : 1.5.4.8
16:09:25 : UpgradeDLL version : 1.2.6.7
16:09:25 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
16:09:26 : LGE USB Driver Version :
16:09:26 : Android PDLV Version :
16:09:26 : Android NDLV Version :
16:09:26 : ******************************************
16:09:26 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:09:26 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
16:09:26 : SetEmerModeAT()
16:09:26 : _IsConnectedPhone Call
16:09:35 : _IsConnectedPhone(0)
16:09:35 : 0 - NotConnected.
16:09:35 : 1 - Normal connect success
16:09:35 : 2 - Emergency connect success
16:09:35 : *****CheckOS Start********
16:09:35 : Microsoft_Windows7_Home Edition_
16:09:35 : *****CheckPCSyncPrograms Start*****
16:09:36 : PCSyncPrograms Not Found - OK and ready to upgrade
16:09:36 : Checking the connection with the cell phone...
16:09:36 : dwWaitResetTime(40000 ms)
16:09:37 : _IsConnectedPhone Call
16:09:44 : _IsConnectedPhone(0)
16:09:44 : 0 - NotConnected.
16:09:44 : 1 - Normal connect success
16:09:44 : 2 - Emergency connect success
16:09:45 : _IsConnectedPhone Call
16:09:52 : _IsConnectedPhone(0)
16:09:52 : 0 - NotConnected.
16:09:52 : 1 - Normal connect success
16:09:52 : 2 - Emergency connect success
16:09:53 : _IsConnectedPhone Call
16:10:01 : _IsConnectedPhone(0)
16:10:01 : 0 - NotConnected.
16:10:01 : 1 - Normal connect success
16:10:01 : 2 - Emergency connect success
16:10:01 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:10:11 : _IsConnectedPhone Call
16:10:11 : _IsConnectedPhone(0)
16:10:11 : 0 - NotConnected.
16:10:11 : 1 - Normal connect success
16:10:11 : 2 - Emergency connect success
16:10:11 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:10:17 : _IsConnectedPhone Call
16:10:24 : _IsConnectedPhone(0)
16:10:24 : 0 - NotConnected.
16:10:24 : 1 - Normal connect success
16:10:24 : 2 - Emergency connect success
16:10:24 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:11:02 : _IsConnectedPhone Call
16:11:02 : _IsConnectedPhone(0)
16:11:02 : 0 - NotConnected.
16:11:02 : 1 - Normal connect success
16:11:02 : 2 - Emergency connect success
16:11:02 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:11:04 : Check Cancel button active..
16:11:04 : Check Cancel button active..
16:11:04 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
16:11:04 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:11:04 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
16:11:04 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
And screenshots attached.
Listed in Device Manager:
ADB Interface > Android Platform Sooner Single ADB Interface
Modems > LGE Android Platform USB Modem
> LGE Mobile USB Modem
> LGE Mobile USB Modem #2
Other Devices > Unknown device (I installed the fastboot drivers to this, had to get around the driver signature stuff)
Ports (COM & LPT) > LGE Android Platform USB Serial Port (COM7)
> LGE Mobile USB Serial Port (COM4)
> LGE Mobile USB Serial Port (COM6)
Universal Serial Bus Controllers > LGE Mobile Composite USB Device
> LGE Mobile Composite USB Device
Please help if you can. Thank you.
Hi not_so_optimustic, you could try this way: http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
Hi not_so_optimustic, you could try this way: http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Thank you for the reply.
What happens: I hold power and volume up after plugging in. Immediately I get a "USB device no recognized" in a bubble in the bottom right. A second later I get the S/W screen. I put the battery in. Start the program. If I switch windows it hangs. It gives me this:
Code:
[R&D Test Tools Log File]
20:28:06 : Launching SW update
20:28:06 : Unpacking KDZ
20:29:00 : KDZ file extraced
20:29:18 : Files were extracted.
20:29:18 : LGMobileDL Load.
20:29:19 : Port = 0
20:29:19 : Connecting to phone
20:29:42 : PHONE WAS NOT FOUND!
20:29:44 : ===FINISHED===
Hi not_so_optimustic, did you do this?
**Navigate to Update/Tools and there select upgrade recovery.
Click to expand...
Click to collapse
Just in case:
In the own tool you have an option for install the drivers, you could try it.
Cheers . Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
Hi not_so_optimustic, did you do this?
Just in case:
In the own tool you have an option for install the drivers, you could try it.
Cheers . Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Sorry for the delay. I have found some more time to try to fix it this weekend.
I am not sure what this part refers to:
**Navigate to Update/Tools and there select emergency recovery software.
Click to expand...
Click to collapse
There is no such menu visible in B2CAppSetup.exe that I can see.
Other oddities:
I was wrong about my phone model. it is actually an LG L9 MS769, not a P769. I don't know if that matters.
The B2CAppSetup.exe interface looks VERY different on my friends computer as opposed to mine. (see the attached screenshot) I am in the process of going through the motions on her computer to see if I get different results. However after opening the app and selecting my phone model and letting it install the drivers, I unplug and plug the USB cable again (staying in S/W mode), and nothing interesting happens beyond the circling "connecting" icon.
Let me know what you think. I'll keep trying.
I feel like I'm getting close! After installing the drivers, both the "Start Upgrade" and "Install USB Driver" buttons are greyed out. A message assures me that "Your device has the latest software available from the LG Mobile Support Tool", although this is clearly not true.
After clicking on the dropdown menu in the top right and selecting "Upgrade Recovery" it pops open the window pictured in the screenshot and attempts to download the software. This window stops progress at the download stage where the timer is frozen at 15 seconds.
Reinstall recovery image through fastboot
I managed to mess my L9 up several times before getting the bootloader unlocked, and one of the ways I got out of it was getting into fastboot using this method: http://forum.xda-developers.com/showthread.php?t=2119090 and then using fastboot commands to re-flash recovery, as described here: http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot (step 6). You can find recovery img files in the second post on this thread: http://forum.xda-developers.com/showthread.php?t=2623222
If you can get into recovery again then you can flash a new rom, if I've understood your problem correctly. Good luck!
Try This one work if you install JB before [Need s/w update mode only]
not_so_optimustic said:
Hello, I shall do my best to shortly and concisely lay out my difficulties. (It was a bad decision to try to install a custom ROM on the Monday before finals)
I was looking to put a custom ROM on my phone, and was following this guide. I put CWM on my phone via this method. I had the ROM I wanted on my SD card. I boot into CWM, wipe the davlek cache like a good little boy, wipe the system (yikes), and select the .zip I want. Nope, status 7 error, abort! Heart racing slightly, I quickly Google and find a nice solution. Problem! When I reboot back into CWM... there is no CWM, and I'm stuck with the useless stock recovery mode that literally does nothing but show a picture of a dead android on its side.
I'm having issues with the offline installer. I've tried both the automated method and doing it myself but really nothing seems to be getting around the fact that my computer doesn't want to talk to my windows 8 computer, or my friend's windows 7 computer.
Here's some log output:
Code:
16:09:25 : [C:\LGMobileUpgrade] Try to delete folder
16:09:25 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
16:09:25 : Start Date : 2014-03-10 16:09:25
16:09:25 : ---------- QM Testmode ---------
16:09:25 : ***** Check Tool Version *****
16:09:25 : Tool version : 1.5.4.8
16:09:25 : UpgradeDLL version : 1.2.6.7
16:09:25 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
16:09:26 : LGE USB Driver Version :
16:09:26 : Android PDLV Version :
16:09:26 : Android NDLV Version :
16:09:26 : ******************************************
16:09:26 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:09:26 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
16:09:26 : SetEmerModeAT()
16:09:26 : _IsConnectedPhone Call
16:09:35 : _IsConnectedPhone(0)
16:09:35 : 0 - NotConnected.
16:09:35 : 1 - Normal connect success
16:09:35 : 2 - Emergency connect success
16:09:35 : *****CheckOS Start********
16:09:35 : Microsoft_Windows7_Home Edition_
16:09:35 : *****CheckPCSyncPrograms Start*****
16:09:36 : PCSyncPrograms Not Found - OK and ready to upgrade
16:09:36 : Checking the connection with the cell phone...
16:09:36 : dwWaitResetTime(40000 ms)
16:09:37 : _IsConnectedPhone Call
16:09:44 : _IsConnectedPhone(0)
16:09:44 : 0 - NotConnected.
16:09:44 : 1 - Normal connect success
16:09:44 : 2 - Emergency connect success
16:09:45 : _IsConnectedPhone Call
16:09:52 : _IsConnectedPhone(0)
16:09:52 : 0 - NotConnected.
16:09:52 : 1 - Normal connect success
16:09:52 : 2 - Emergency connect success
16:09:53 : _IsConnectedPhone Call
16:10:01 : _IsConnectedPhone(0)
16:10:01 : 0 - NotConnected.
16:10:01 : 1 - Normal connect success
16:10:01 : 2 - Emergency connect success
16:10:01 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:10:11 : _IsConnectedPhone Call
16:10:11 : _IsConnectedPhone(0)
16:10:11 : 0 - NotConnected.
16:10:11 : 1 - Normal connect success
16:10:11 : 2 - Emergency connect success
16:10:11 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:10:17 : _IsConnectedPhone Call
16:10:24 : _IsConnectedPhone(0)
16:10:24 : 0 - NotConnected.
16:10:24 : 1 - Normal connect success
16:10:24 : 2 - Emergency connect success
16:10:24 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:11:02 : _IsConnectedPhone Call
16:11:02 : _IsConnectedPhone(0)
16:11:02 : 0 - NotConnected.
16:11:02 : 1 - Normal connect success
16:11:02 : 2 - Emergency connect success
16:11:02 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
16:11:04 : Check Cancel button active..
16:11:04 : Check Cancel button active..
16:11:04 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
16:11:04 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:11:04 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
16:11:04 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
And screenshots attached.
Listed in Device Manager:
ADB Interface > Android Platform Sooner Single ADB Interface
Modems > LGE Android Platform USB Modem
> LGE Mobile USB Modem
> LGE Mobile USB Modem #2
Other Devices > Unknown device (I installed the fastboot drivers to this, had to get around the driver signature stuff)
Ports (COM & LPT) > LGE Android Platform USB Serial Port (COM7)
> LGE Mobile USB Serial Port (COM4)
> LGE Mobile USB Serial Port (COM6)
Universal Serial Bus Controllers > LGE Mobile Composite USB Device
> LGE Mobile Composite USB Device
Please help if you can. Thank you.
Click to expand...
Click to collapse
Try This one work if you install JB before [Need s/w update mode only]
http://forum.xda-developers.com/show....php?t=2686746
davidxd said:
I managed to mess my L9 up several times before getting the bootloader unlocked, and one of the ways I got out of it was getting into fastboot using this method: http://forum.xda-developers.com/showthread.php?t=2119090 and then using fastboot commands to re-flash recovery, as described here: http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot (step 6). You can find recovery img files in the second post on this thread: http://forum.xda-developers.com/showthread.php?t=2623222
If you can get into recovery again then you can flash a new rom, if I've understood your problem correctly. Good luck!
Click to expand...
Click to collapse
I flashed the recovery (successfully?). My next confusion is how to boot into it. My device now shows the LG logo at boot and "Security Error" underneath.
Code:
C:\omap4boot-for_optimus-v1.21>start_fastboot.bat
--------------------------------------------
OMAP4boot for P920/P720/SU540/SU760/SU870
--------------------------------------------
by wkpark at gmail dot com
[1] cx2 - Optimus 3D Cube (SU870/P720)
[2] p920 - Optimus 3D (P920)
[3] p940 - Prada 3.0 (P940)
[4] su540 - Prada 3.0 (SU540/KU5400)
[5] su760 - Optimus 3D (SU760)
[x] exit
-------------------------------------------
Select device and <ENTER> 3
p940 selected
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 5fd90f8f47e3dafb559b8cc604f1b59164668513
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-seconds...
[*] msg size = 4
usb_write 21552
[*] data size = 21552
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 246272
usb_write 4
usb_write 246272
** Done **
------------------------------
Please remove USB cable
and wait until LG Logo on
then reconnent USB cable again
------------------------------
fastboot devices (y/N) ? and press <ENTER> n
ls: resigned/p940-MLO*.bin: No such file or directory
Do you want to replace u-boot (y/N) ?n
ls: cwm/p940-*.img: No such file or directory
Press any key to continue . . .
0163953A1401F010 fastboot
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\omap4boot-for_optimus-v1.21>fastboot flash recovery recovery-clockwork-6.0.3.
1-p760.img
sending 'recovery' (5894 KB)...
OKAY [ 3.020s]
writing 'recovery'...
OKAY [ 1.538s]
finished. total time: 4.559s
C:\omap4boot-for_optimus-v1.21>fastboot reboot
rebooting...
finished. total time: 0.003s
C:\omap4boot-for_optimus-v1.21>
Oh ****. My phone does not boot, period. It still goes into fastboot mode when connected to the computer. I tried following the steps a few more times, and during my last attempt, after
Code:
At the other prompts answer always "N", this could be important.
I pressed "y" and it replaced "u-boot." Currently hitting myself over the head. How do I reflash the stock u-boot?
Hi not_so_optimustic, you could try this http://forum.xda-developers.com/showthread.php?p=48834061.
Cheers. Good luck
Sent from my LG P76020L-EUR-XX unlocked and rooted
u-boot
This post might help you there:
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
davidxd said:
This post might help you there:
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
Click to expand...
Click to collapse
I didn't manage to get that fix to work as I got errors of "The program can't start because AbdWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem."
HOWEVER
BajoPrimate said:
Hi not_so_optimustic, you could try this http://forum.xda-developers.com/showthread.php?p=48834061.
Cheers. Good luck
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
This worked pretty perfectly to fix the u-boot problem. After flashing the three attached images for u-boot, boot, and recovery, the boot process was back to "normal." So I then used "fastboot flash recovery [my cwm file]" and it flashed successfully again, and I'm back to the LG logo with the security error, and not really sure how to get to CWM.
The guide you linked to recommends the offline fix, which is the method I've been having issues with. My goal at this point is to get CWM to start properly so I can flash my ROM from the SD card. However the method to fix the security error involves installing a different recovery (not CWM). So that's where I stand at this point.
I'll do some more research and be back here to report whatever my next screwup happens to be.
EDIT: So I think my security error is due to my bootloader not being unlocked. I will attempt to follow this guide and we'll see how it goes. http://forum.xda-developers.com/showthread.php?t=2221102
EDIT2: The first link says to go here for p769. Unfortunately that method requires my device to already be working -_- the search goes on.
not_so_optimustic said:
I didn't manage to get that fix to work as I got errors of "The program can't start because AbdWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem."
HOWEVER
This worked pretty perfectly to fix the u-boot problem. After flashing the three attached images for u-boot, boot, and recovery, the boot process was back to "normal." So I then used "fastboot flash recovery [my cwm file]" and it flashed successfully again, and I'm back to the LG logo with the security error, and not really sure how to get to CWM.
The guide you linked to recommends the offline fix, which is the method I've been having issues with. My goal at this point is to get CWM to start properly so I can flash my ROM from the SD card. However the method to fix the security error involves installing a different recovery (not CWM). So that's where I stand at this point.
I'll do some more research and be back here to report whatever my next screwup happens to be.
EDIT: So I think my security error is due to my bootloader not being unlocked. I will attempt to follow this guide and we'll see how it goes. http://forum.xda-developers.com/showthread.php?t=2221102
EDIT2: The first link says to go here for p769. Unfortunately that method requires my device to already be working -_- the search goes on.
Click to expand...
Click to collapse
What problem are you having with the offline flash? If the problem was that it stops at 15%, that's because you had a jellybean u-boot. The offline should work now.
Sent from my LG-P769 using XDA Premium 4 mobile app
I
kuma82 said:
What problem are you having with the offline flash? If the problem was that it stops at 15%, that's because you had a jellybean u-boot. The offline should work now.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh! Well. Is it safe to flash CM11 when I have an Ice Cream Sandwich u-boot?
not_so_optimustic said:
I
Oh! Well. Is it safe to flash CM11 when I have an Ice Cream Sandwich u-boot?
Click to expand...
Click to collapse
No
You will get a security error even if your bootloader is unlocked.
Sent from my LG-P769 using XDA Premium 4 mobile app
I installed the stock ROM via the offline fix successfully! It immediately went into a nonstop boot loop of the LG logo, so I turned it off and did a hard reset (volume up + home + power, let go of power after it starts up), which then allowed me to boot into the system.
THANK YOU so much! I am now the happiest person on the planet. Can I buy any of you a beer?
not_so_optimustic said:
I installed the stock ROM via the offline fix successfully! It immediately went into a nonstop boot loop of the LG logo, so I turned it off and did a hard reset (volume up + home + power, let go of power after it starts up), which then allowed me to boot into the system.
THANK YOU so much! I am now the happiest person on the planet. Can I buy any of you a beer?
Click to expand...
Click to collapse
Glad you got it fixed
Sent from my LG-P769 using XDA Premium 4 mobile app
Hi not_so_optimustic, happy to help!
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted