Ok gang i have been lurking around for a while and im finally deciding to upgrade my phone. for my short background, i have done this on my old magician (once) and a friends t-mobile magician (once) as well, but now i want all the new gadgets and speed for my hermes. for the record i am currently a Cingular/ATT customer living in Orlando, FL where there is great 3G coverage.
here is what i have:
herm100
ipl 1.01
spl 1.06
ROM version 1.34.502.1
ROM date 09/21/06
Radio version 1.16.00.00
Protocol version 32.53.70.18.01H (i am not sure what this one means though...)
here is what i am planning to do (in the exact order of which i will run them so if my order isnt right please tell me):
HTC_Hermes_SIM_CID_Unlock_v3a
Hard-SPL-V7.rar package
HERM_Radinly_1.43.00.00_CustomRUU.rar (unless anyone thinks the 46 or 47 version would be better for ATT in my area)
Hermes_WM6_WWE_vp3G_v2.0_ATT.rar
CVSD_1.2_061226.rar
HomePlugIn_1.6.0.0.rar
vp3G_v2.0_CommManager.rar *edit* (yes i know the comm manager must be closed for this one too) *edit*
vp3G_v2.0_StreamingMedia_PATCH.rar
XM_Radio.rar (may install this later)
MobiTV .rar (may install this later)
TCPMP_v0.72RC1.exe
ac3.plugin.0.72RC1.rar
flac.plugin.0.72RC1.rar
ffmpeg.plugin.0.72RC1.rar
vorbislq.plugin.0.72RC1.rar
and that should be it i hope!!!! also, i think i remember needing a codec to play xvids through tcpmp but i cannot find anything that i have archived on my computer... so if anyone has that please let me know.
if there are any other precautionary measures that i can take PLEASE let me know. i 'somewhat' understand how the hardspl works, is that the only protection i have? should i clear up my phones memory? i doubt there is anything like a 'scandisk' or anything for the type of memory the phone uses but i just want to be 1000000% sure that this flash will be successful thats all. thanks guys up front for a great community and any help is GREATLY appreciated.
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Madcap180 said:
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Click to expand...
Click to collapse
No do the unlocker first...it loads HardSPL (1.40.oli) onto the device....it will downgrade the SPL if you run it second.
Once that is done...load HardSPLv7 onto it.
Then follow the list you said.
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
beppomarx said:
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
Click to expand...
Click to collapse
OK.....i will answer these qs but you do need to read the wiki so you DEFINATLY understand the different aspects of the hermes...
The device can be downgraded to normal (like factory settings)....see the guides in my sig for more info.
Overclocking....dont even bother...the restriction is in the ROM....later ROMs use the cpu much better.
If you want to backup contacts etc...either use PIMBackup (search this forum for it) or get an exchange account which will sync contacts/emails/tasks etc..
the IPL is still 1.01, can this be upgraded or does it not make a difference?
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
beppomarx said:
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
You need to install ALL the latest .net framework packages from Microsoft on your PC, the file is meant to run on your pc NOT your hermes.
you guys are the best and so is this site!!!
last question...
i downloaded the 'vp3G's WM6 v2.0' ROM and added the patch for 'vp3G_v2.0_StreamingMedia_PATCH.cab ' but i still cannot watch videos on youtube or any site of the likes? the page gives me an error saying 'Hello, you either have Javascript turned off or an old version of Macromedia's Flash Player. Get the latest Flash player.'
i cannot find java or macromedia that works on windows mobile... what can i use??? i am finding some stuff on javaME but nothing i can comprehend or download...
lol, when I tried to do the Unlocker first it temp-bricked my phone.. I had to reflash old rom, then run hardspl then the unlocker in that order.
Use google and search for 'Flash Player for Pocket PC'
it will give you the link to Adobe Flash Player
Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
SoftBank's known 3G/HSDPA flat-rate packet data connection setting that has hacked from old X01HT ExtROM (user name: "open", password started from "oz...") will be unusable on end of March.
The user name of new setting (available at current ROM that released on end of Nov. 2006) has changed as "opensoftbank", and still no one hacked the password itself.
However, finally I found a way to create the connetcion, using some files dumped from current X01HT ROM.
To create SoftBank's connection that can be used continuously after Apr. 1 2007, you need ROM COOKING as follows, because at least the file WIFIwake.exe should be in the ROM to make the connection.
Step 1. Cook your ROM (add following 2 files in attached ZIP) and update device.
For general instruction of Hermes' ROM cooking, see the Wiki and related resouces.
addfile Out.xml
addfile WIFIwake.exe(A.xml and Initial.exe aren't needed)
Step 2. Install ConnSBM.CAB (included in ZIP)
The connection will be created, however password entry is still empty at this moment.
Step 3. The files are in ROM, so you need to set to "Menu -> Show All Files" on File Explorer to make ROM-attributed files visible (or, use similar option for 3rd party's file explorers, such as Resco or GSFinder+).
Step 4. Run WIFIwake.exe from \Windows folder.
The password will be created into the connection made by ConnSBM.CAB at Step 2.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
If the password is not created, maybe WIFIwake.exe (non-ROM attributed) exists on \Windows. After running Initial.exe, WIFIwake.exe is copied onto storage from ROM. You need to delete it before retry, if you have run Initial.exe before install ConnSBM.CAB or lost setting.
BTW, I guess this way can be applied not only Hermes, but also Universal and/or any other HTC devices those can edit OS ROM (at least, I have successed on WM6 for Universal).
Enjoy AT YOUR OWN RISK !
Great work, a lot of japanese people was pursuing this for long time! Congratulations
Awesome, I had been doing this same thing for 3-4 days no and getting nowhere.
Mad props to you.
I have the Hermes and I'll be going to work as an engineer in Japan from April. I have installed the DoCoMo ROM for the moment (simply because out of the two ROMs, it's the one to have Bootloader 1.0.4, I have no trouble reading Japanese, and I need a Japanese input that's a bit more stable than Bagoj's IME).
However I'm wondering exactly what this thread would enable me to do... I'm planning on getting a subscription with either SoftBank or DoCoMo (whichever provides SIM cards/accepts to register a foreign phone).
If I get a SoftBank subscription, would this enable me to somehow cheat the subscription on getting more Internet for free? Or if that's wrong, what exactly would it enable me to get?
I haven't looked into the phone subscription system at the moment, but soon will. Whatever this thread exactly means could be a huge help in any choice I would have to make.
Many thanks for your help in advance,
Cheers,
Yannick
Hmm, I get the connection added but when I try to run the initial.exe from Windows is doesnt do anything. Using 3DES Custom.
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
mousey_ said:
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
Click to expand...
Click to collapse
I finally got the program to work. Funny thing is that I could nt cook a ROM with the initial.exe in it of it would not install. I was using the Rom Koch 0.99 release. So if I just copied the files over to a fresh install of a ROM it worked but I had to click initial.exe about 4-5 times before the "loading" graphic appeared.
I am assuming that it either installs a dll with the password encoded in it of he knows the password and didn't want it to become public. Initial.exe puts the connection password in the connection that ConnSBM.CAB creates.
Without the initial.exe running you have the connection with a blank password.
Files
Seeing as how none of these files are in the ROM itself is there any way you can post a list of file to help us re-create the process?
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Alcibiade said:
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Click to expand...
Click to collapse
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
This is wonderful news indeed! Now we only need a way to cook Japanese fonts and stable input into new ROMs and life would be perfect...
Great!
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
Every time I cooked the "addfiles" the initial.exe would not run properly and create the connection. If I cooked the other files minus the initial.exe and the cab it still wouldnt create the password. I could only get it to work by copying the files after flashing. Anybody get it to work in a cooked rom?
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Alcibiade said:
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Click to expand...
Click to collapse
@^#)(!^@$ MMS Lite doesnt work
More EASY way has been found!!!
Another Japanese SoftBank user has found more easier way to add the new SB connection.
Now you DON'T need any ROM cooking. Please move to new thread.
http://forum.xda-developers.com/showthread.php?p=1172318
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
posted here, OS also Japane,,どうだ！参ったか！
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
I am not sure to understand the "cook" the ROM... are you talking about the OS part? The Radio or the Extended rom ?
Cheers
help
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
ysi said:
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
Click to expand...
Click to collapse
after copy Out.xml & WIFImake.exe to /windows folder, click on WIFImake.exe then the passwd will be inserted there!
thanks for the mail but still i did not
may be some thing wrong with my rom
thanks
I allreyd flashed a lot and did use a soft spl, but I do not find a proper
explanation what it is.
So, i Think it is the Bootloader ?
Can anyone tell me what a soft and a hard SPL is and does ?
For what do I need it ?
I just got my new Touch Pro bought in UK and now it is here in Germany and I want a german ROM on it as soon as it is available.
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threats
Greetings
Marcus
69reichertm said:
....So, i Think it is the Bootloader ?...
....Can anyone tell me what a soft and a hard SPL is and does ?....
Click to expand...
Click to collapse
Yep your right on that assumption sir The bootloader does alot of the low level handling of the startup process when you power on the device aswell as handling the process when you flash anything to the device...im sure its far more technical than that but thats a starter explanation Essentially you NEED a bootloader for the device to work at all, the case with many of the HTC devices...other devices are different most likely.
Soft SPL: (normally referred to as SSPL) IS loaded into RAM and allows you to perform some of the operations the standard bootloader would do, naturally with some extra functionality (explained later)
HardSPL: Same sort of thing except it is flashed to the device permenantly, so it replaces the HTC bootloader in your devices flash memory.
Both of these tend to safeguard against corrupting the device by having some fancy workarounds and updates to the processes built into the HTC SPL, and the best part is that they allow you to flash ANY ROM you wish therefor allowing us to use Cooked ROMs and various updates like radio updates and etc...frees the device up quite superbly.
69reichertm said:
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threads
Click to expand...
Click to collapse
Perhaps some mebers feel like adding a general HardSPL page to the wiki for FAQs like this to be answered better than "Search the forum.." since we know its not that good for finding anything.
The Wiki is there for everyone to use and edit so, learn and pass it on
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Hello !
Thank you for your advise.
One more question:
Should I install Hard or Soft SPL ?
I want to try out many ROMS - I think Hard is better, what do you mean ?
Thank you for your help
By the way:
I am a kind of technican - working in IT for nearly 18 years starting fron Novell, Banyan Vines and DOS up to Windows Vista. Also I am a kind of apple Guru, thats why I have certainly an iPhone 2G and 3G.
For business I use HTC devices sind the first MDA. But I lost track a little sind iPhone.
As I am a technic nerc I sstarted with th the Diamond touch again and I liked the device but i swapped this week to the touch pro because of the keyboard, SD Slot an flash light. I love this device.
By the way I also have the new Samsung Omnia 900 here and an unfun Nokia E71 ( I hate this old symbian - looks like last centuty )
So good night and thank you
Marcus
Jiggs1337 said:
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Click to expand...
Click to collapse
no, raphael hardspl is unsigned, means any rom is allowed, including HTC official roms.
69reichertm said:
One more question:
Should I install Hard or Soft SPL ?
Click to expand...
Click to collapse
you can only install hardspl. the job of soft spl is to install hardspl.
do not ever try any of the following:
- with SSPL, do not flash anything other than the included SPL NBH files. as extra protection the diamond and raphael SSPL's require htchacker sign (except the version jocky edited) and will reject anything that's not an SPL.
- and do not ever try to flash SSPL as an NBH, especially if it is a diamond or raphael.
Im sorry to disagree with your "don't tell me to use the Wiki".
But this is a fairly comprehensive answer to your question: http://wiki.xda-developers.com/index.php?pagename=SPL Questions? straight out the wiki.
Ta
Dave
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Jiggs1337 said:
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Click to expand...
Click to collapse
Yes - Everything Goes.
No.
Ta
Dave
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Jiggs1337 said:
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Click to expand...
Click to collapse
There are several things.
UC is short for User Customisation; it is in all the Kaiser ROM's nowadays. l3v5y's Raph ROMs also have it.
Links: l3v5y's ROMs & Main UC Thread.
I use UC to install programs, Provisioning XML (as part of UC) to change registry settings, my xcopyce application to copy folders and active sync to copy contacts, calender etc.
Ta
Dave
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Jiggs1337 said:
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Click to expand...
Click to collapse
I can't say. I haven't done it, what says you will lose all the info, the RUU or the thread? If it's the RUU, then you should be OK, it's probably the standard message that the proper RUU (used for carrier ROM upgrades) has.
UC is good, takes maybe an hour or two to get setup, but once done, you don't have to do it again and it makes flashing so much fun. I started with just installing CAB's and Copying files, then went onto ProvXML for my registry settings next. The latest version of Schap's Advanced Config (3.0) can export tweaks into a Prov XML file for you. It is worth it if you flash your ROM as often as I do.
Dave
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Jiggs1337 said:
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Click to expand...
Click to collapse
We are getting a little off topic of the OP now but...
Any tweaks done with schaps Advanced Config can be easiler exported using a "export" menu option.
If you export your registry after flashing, and again after you have all your settings setup right, you can Diff then using a Diff Program and copy the changes into your ProvXML file. Most PPC Regedit programs can export.
Any more on UC, I'd have a read of the UC thread and ask any questions in there. Myself and l3v5y keep and eye on it most of the time and should be able to help fairly quickly.
Ta
Dave
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Thank you for all the help - now lets start using the Touch - weekend is near
69reichertm said:
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Click to expand...
Click to collapse
lol, sure, there is only one package, and you simply click the EXE and it goes
http://forum.xda-developers.com/showthread.php?t=410150
Is it possible to use those backup softwares? Like Spb Backup for example that say "ROM Upgrade Mode — now it's possible to restore data after the ROM upgrade"? Instead of UC and such?
there is a IPL initial program loader (sort of bios)
a SPL secondary program loader (kinda like the ntloader)
and there is a service mode (3 color screen) (the flashprog)
then we have a RUU remote unit upgrader
mft masterfile table
mbr master boot record
and some other shizzle
the device switches the output of the internal usb when device is in 3 colorscreen to a service mode which allows it to overwrite the internal flashdrive .. pretty neat as what it actually does is switching to an internal flashprogrammer which programs the internal flashdrive. this is the same process as is used for your pc at home to update the bios.
the CID celloperator identification code (used for blocking certain rom upgrades)
enjoy..
Soft SPL quesiton
I have a SPV M700 and it's unlocked. I want to install Schaps rom. I have the folowing SPL version 1.07.000. I have't managed to install hard spl. Can I use soft spl to flash it? Can I permanently brake it?