Related
I've just recently upgraded from wm2003 to wm2003se from zeroextreme's ROM. I've noticed that there isn't no Microsoft Reader in the basic apps installed. I then downloaded the installer of Microsoft Reader for PPC. What I would like to do is for it to be included in the basic apps to be installed after a hard-reset. How do I do this?
MSReaderPPC
Add this command line into your Config.txt file of your Extended ROM.
CAB: \Extended_ROM\msreader_arm.CAB
Download the attachment, unzip and place the cabinet file within into your Extended ROM folder.
Re: MSReaderPPC
[Krueger said:
Dr.Stein]Add this command line into your Config.txt file of your Extended ROM.
CAB: \Extended_ROM\msreader_arm.CAB
Download the attachment, unzip and place the cabinet file within into your Extended ROM folder.
Click to expand...
Click to collapse
I can't seem to edit / change the config.txt file in the Extended ROM. I tried editing it from the Extended ROM and Pocket Word prompts me with this:
"No storage memory available
Tap Cancel, use File Explorer to delete some files, and try again. Or, move the note to an alternate storage location.
Tap Discard to close the document without saving changes"
I then tried to copy the config.txt file to a different folder (i.e. My Documents) and edit it from there. After doing this, I tried to overwrite the config.txt in the Extended ROM with the new config.txt and it says:
"Action Failed
Cannot overwrite file 'config.txt'. The media is write protected.
Press 'Yes' to continue."
extrom unlocker
try this to unlock/unhide your extrom and edit/cook as well.
Re: extrom unlocker
:lol: harhar.. got it.. thanks a lot!
Thank you so much for posting a copy of the CAB file! I had to replace my phone and the new one wouldn't sync. I was getting desparate because most of my books are in .lit format - beginning to go through withdrawl symptoms. And the MS Reader for PPC only loads through the Mobile Device Center. I've been scouring the 'net trying to find some answer that works to fix the problem and coming up with nothing effective. With this CAB, I don't need to sync. Thanks again!
Quite an ancient thread, I hope I'll get some answers...
This CAB does not work on my WinCE 6.0 handheld with ANYKA CPU.
Most of the CAB I download do not work. Only CABs found in MioPocket package work.
Why?
MioPocket contains MS Reader too, already "installed", but upon starting it complains about internal error 010, which afaik means "messing fonts".
So where do I get missing fonts from?
UPDATE 12-21-08
There is some talk that you need to also install the Sdcerts cab before this process will work. Freezing the phone sucks so i would do this first. I will add it to page one.
After bricking my phone three times-I finally got it right. I have a HTC Touch Pro-nobody really explained it to me like I was a two year old-so I decided to break it down. You have to be careful or you will freeze up the phone and then be forced to hard reset. That sucks. So this worked for me. You should extract your own shellres.dll.0409.mui using rom extractor. This is not difficult if you follow these directions. All of the programs are free and I am making a zip to include them all. I included my own shellres.dll.0409.mui. The 0409 refers to the language. It is the code for English.
1. I installed the cab -icon demarrer. It makes a couple registry changes that help the process.
2. Then I used a the rom extractor to get my shellres.dll.0409.mui and copied it to the storage card you have to enter path:\windows\shellres.dll.0409.mui and save to \storage card\shellres.dll.0409.mui To install the Rom extractor You just put the Rom extractor into active sync
3. Then drag the file to the desktop of your computer use unsigner-just drag the file over the unsigner and it is unsigned
4. Then drag the same extracted file over reshacker and navigate the file to change string 321 in the shellres.dll.0409.mui to whatever you want it to say
5. Then open msigner and navigate to your saved file shellres.dll.0409.mui to resign the file
6. Then go to settings/today/items and uncheck to turn off touch flo and then copy the new file from your desktop to the storage card.
7. Install Total Commander on your device-you do this by opening it on your home computer. Then open total commander on your device and navigate to the new file shellres.dll.0409.mui-in the storage card. Then press the stylus on the shellres.dll.0409.mui file and save to clipboard
8. Then use Total Commander to search windows directory for the shellres.dll.0409.mui that is still in the phone. (If possible-rename the file shellres.dll.0409.mui.bak or if not possible press the stylus on top of the shellres.dll.0409.mui that is in the phone and selected for the drop down menue that appears-Paste Here.
9. Then soft reset. Here it is. I included everything you need in the Zip file! Here is where I started-but it is vague-great start icons in the thread though. http://forum.xda-developers.com/showthread.php?t=426264
The HTC start icon is on the zip entitled shellres.192.dll
Just say thank you if any of this helps you
language codes
Your can use the file I included in the zip if you do not want to extract. just change the numbers
shellres.dll.XXXX.mui in place of the XXXX It is 0409 for english-if you want another you can use one of these codes. If you don't have an htc touch pro the file may be named shellres.dll.96.XXXX.mui
0404 CHT Chinese Traditional
0804 CHS Chinese Simplified
0405 CSY Czech
0406 DAN Danish
0413 NLD Dutch
0409 USA English
0407 GER German
0408 ELL Greek
040b FIN Finnish
040c FRA French
040e HUN Hungarian
0410 ITA Italian
0411 JPN Japanese
0412 KOR Korean
0414 NOR Norwegian
0415 PLK Polish
0416 PTB Portuguese Brazil
0816 PTG Portuguese Portugal
0418 ROM Romanian
0419 RUS Russian
041b SKY Slovak
0c0a ESN Spanish
041d SVE Swedish
041f TRK Turkish
You can also change the Start Icon which is really cool. In my touch pro it is in file shellres.192.dll under icon group 4609-
1. Download shellres.192.dll to your storage card. Use total commander to search the windows folder for shellres.192.dll
2. Press the stylus on the file and select copy to clipboard
navigate with total commander to the storage card and press the stylus there and select "paste here"
3. Use unsigner to unsign the file
4. use reshacker to open the file and navigate to "Icon Group" 4609. You will see your icon in the program.
5. Select menu "Action" and replace. Navigate to the icon you want. Select it. Save the file.
6. Sign the file with the Msigner
7. Place the file in the Storage card
8. Use Total Commander to locate shellres.192.dll and rename it shellres.192.dll.bak
9. Use total commander to find your new file in the storage card, and move it to the windows folder of your device.
10. Restart with a soft reset adn enjoy your new icon.
Useful thread where I learned a lot http://forum.xda-developers.com/showthread.php?t=426264 You can get ready made .ico files here
Can you explain one point ... ?
I tried to extract the file shellres.dll.040C.mui (french WM6.0) directly into \windows, and before modifying the file with my computer, I just re-boot the device with that change (so, just a ROM file extraction but without any modification in the file) ... and then, the device is frozen on the Windows welcome page.
Can you explain that ?
louis09 said:
I tried to extract the file shellres.dll.040C.mui (french WM6.0) directly into \windows, and before modifying the file with my computer, I just re-boot the device with that change (so, just a ROM file extraction but without any modification in the file) ... and then, the device is frozen on the Windows welcome page.
Can you explain that ?
Click to expand...
Click to collapse
Did you follow steps exactly? You have to be careful. You can see from my screen shots that it works. I change my text every day as i feel. Did you install the icon demarrer cab?
you should also be able to navigate to the file shellres.dll.040C.mui (with Total Commander) and press the stylus on it and select copy to clip board. Then navigate to the storage card and press the stylus on a blank area and select copy here. The handheld needs the dll to work-so it is not removed from the device it is just copied.
Also make sure that your computers folders are set to view hidden files. It took me a while to get this right-and there is no step by step tutorial but the one i made here-from what I found.
Ok, but the result is the file shellres.dll.xxxx.mui in \windows
Whatever the handling, from the ROM to the SD card, to the computer, ..., the clipboard, ..., the file is finally copied in \windows
So, how can we explain that a direct extraction to \windows cannot work ?
Which operation in your process can avoid the problem ?
I don't want to modify the icon, just the text...
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
louis09 said:
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
Click to expand...
Click to collapse
The icon demmarer is a cab made by a developer. i included it, and all the necessary programs in the zip file. The cab just changes a few resgistry settings to allow this. (i believe) The file once copied to your computer can be manipulated and string value 321 changed-then compile script, save and sign. all included in the zip.
I want to know that you are able to do it, as I am.
louis09 said:
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
Click to expand...
Click to collapse
I am having the same problem as Lewis and my device locked up twice at the windows login screen. You cannot modify the file with commander no matter what you do with your steps. There has to be something you left out. I am very good at what I do and am very far from being an ameteur
Chosen4Goodness said:
I am having the same problem as Lewis and my device locked up twice at the windows login screen. You cannot modify the file with commander no matter what you do with your steps. There has to be something you left out. I am very good at what I do and am very far from being an ameteur
Click to expand...
Click to collapse
Total Commander is only used to move the file-not modify it. Follow the steps exactly. Rename the old mui to mui.back.
and install the icon demarrer cab fisrt. Turn off touch flo before. I have a Sprint HTC Touch pro with a stock rom.
The cab demarrer may be strongly needed, or/and the unsigner/signer software ?
It should be useful to know what the cab and signer/unsigner do.
Which key in the registry is concerned ?
Is ResHacker needed ? Is ROM extractor not enough ?
And mainly, why does only an extraction to \windows freeze the device after a reboot ?
I'm trying to contact the ROM extractor developer VK (a.k.a. THEVK, GreateVK)...
louis09 said:
It should be useful to know what the cab and signer/unsigner do.
Which key in the registry is concerned ?
Is ResHacker needed ? Is ROM extractor not enough ?
And mainly, why does only an extraction to \windows freeze the device after a reboot ?
I'm trying to contact the ROM extractor developer VK (a.k.a. THEVK, GreateVK)...
Click to expand...
Click to collapse
You have to read this thread. http://forum.xda-developers.com/showthread.php?t=426264 Someone else made the icon dem cab. All I know is I read every page of every thread about this tweak-none was a road map-I just knew it could be done so I kept trying til I got it. I had to mod my start text from trying and reading. I finally got it with this method. the extraction alone will not freeze the phone-since the file is not removed from the windows registry. It is in fact not possible to remove shellres.dll.xxxx.mui since it is the entire shell of the phone.
Read every thread about start text
Ok, but the extraction will freeze the device if we do only this
So, this is the reason why the icon cab and/or one of the other operations avoid that.
Probably like Chosen4Goodness, I confirm that, if I extract the file and re-boot without any other change, the device is frozen...
freeze
Anxious to hear that someone other than me was able to follow these directions step by step and not freeze their device.
Don't worry, I'm probably not soo good !
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
louis09 said:
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
Click to expand...
Click to collapse
Be brave. Give it a go Louis!
louis09 said:
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
Click to expand...
Click to collapse
louis09 said:
I read in one thread how to change the word "Start". I tried to do it and I got a frozen device after reboot. So, a hard reset was needed. Another guy in this site got the same problem this week.
In fact, if I only extract shellres.dll.040C.mui (WM6.0 french version) to \windows\shellres.dll.040C.mui without any other change, I get the same problem.
So, maybe you can explain in more details how to do. Where to save the extracted file and to install at the end ? Is another operation needed ?
louis09
Click to expand...
Click to collapse
I couldn't send you a pm because you have your profile set to not accept incoming pm. Anyways, these are the steps that I follow to do this:
1. Extract shellres.dll.XXXX.mui via ROM Extractor;
2. Open it with ResHacker;
3. Look for String Table -> 321 -> Line 5120 and change this to whatever you want;
4. Hit "Compile"
5. Save the file. At this point, you will have two shellres files - one of them will have "original" in the file name. Just save that one in case you want to keep it.
6. Transfer to device via ActiveSync (USB, I haven't tried any other connection such as BT, Wifi, etc) into \Windows
7. Soft Reset your device.
How are you doing the transfer back to the device? It might be that the file is not transferring completely to the device, or getting corrupted in the process. TotalCommander, and Resco have not worked for me for this purpose. Give it a shot and see if it works.
Good luck and let me know how it turns out.
Ok, I have modified my profile.
I need a precise information about the location "Save to" in ROM extractor.
Because doing only that, to \windows\shellres.dll.040C.mui (the same file location than the ROM), is enough to freeze the device after a reboot !
So, why ?
I tried only that "simple" operation because I tried the 1st time the complete one (modify the file and transfer to the device) and I got the same problem. I believed that was due to the change in the file but the extraction is enough.
Maybe we have not to extract in \windows ?
louis09 said:
Ok, I have modified my profile.
I need a precise information about the location "Save to" in ROM extractor.
Because doing only that, to \windows\shellres.dll.040C.mui (the same file location than the ROM), is enough to freeze the device after a reboot !
So, why ?
I tried only that "simple" operation because I tried the 1st time the complete one (modify the file and transfer to the device) and I got the same problem. I believed that was due to the change in the file but the extraction is enough.
Maybe we have not to extract in \windows ?
Click to expand...
Click to collapse
My quesstion is why the reboot after extraction to save to \storage card\shellres.dll.0409.mui?
Also I think the last post above yours neglected to unsign and resign the file. I have fund that improper signing causes a freeze.
I know it is damn tricky since I froze mine three times, prior to doing it this way. Let me know how it goes.
I have no storage card. I reboot because I often close the device.
Could you explain the sign/unsign method ? That seems important as you say !
Which tool we have to use ?
louis09 said:
I have no storage card. I reboot because I often close the device.
Could you explain the sign/unsign method ? That seems important as you say !
Which tool we have to use ?
Click to expand...
Click to collapse
The programs are in the zip. But I think you need a storage card. That way the Mui file is extracted to something other than the phone itself. Get a storage card and then try it. They are not expensive.
Once extracted to storage drag the file on top of the unsign icon-it will flash and that is it. It is unsigned. Then open reshack and change out the word "Start"
compile script
save
Now drag the file over the msigner.
You will have to tell the program where to find the file through the interface of the msigner program.
It will sign the file and then you will have two shellres files. One will be shellres.dll.xxxx_original.mui or something like that. That is the old file.
place the new signed file in your storage card.
then follow the rest of the directions
This is probably a easy question but I have been struggling to find an answer. I downloaded a custom kitchen because I wanted one of the .exe files from it, but when I go into the OEM section there is a folder for the .exe. Inside the folder are the imageinfo.bin, imageinfo.txt and S00 files. Is there a way to get this back to the exe format so I can just copy the file to my phone? I tried loading the custom ROM and copying the exe from the windows folder and it would not allow me to do that either. Any help is appreciated
Those are packages for cooking including the registry files, drivers and other random files needed for the app to work. I would not use those... just type in what your looking for followed by .cab into the search bar and should be able to find it
I realize the rgu file contains the registery entries, but I really need the exe for wmodem used it the ROM. I have tried the wmodem cab files with no success.
snag nueRecMod...
drag the folder containing imageinfo.bin, etc onto nueRecMod.exe in windows explorer
look inside the nueRecMod folder for your compiled module
That works great. Thanks man!!!
Hi All,
with all of the kitchens found here, it is noticeable that when adding any packages to the OEM/SYS folders (i.e S2U2) then trying to re-build the rom specially in the process of BuildOS we got many errors that file already exist and then crashes.
after many research i got to know that the package will extract the files in windows folder for all packages on time then while installation, the files will be copied to the proper folders.
here is the problem, once trying to re-build the rom all files will be copied in the same folder.
is there a way to avoid this?
Hi robekia1,
Even I am facing the same problem when rebuilding os.
we will keep waiting for the seniors here to deliver a solution for us.
thanks to whom will help in this regard
I also faced this problem while cooking ROMs, Hey krazy! help please.
I guess, if we could know the file structure from the folder structue before installing, then it would be easy.
hmmmmmmmm, it seems that this problem have no solution as (Finding emulator for cooked ROM)
done the same and working
robekia1 said:
I guess, if we could know the file structure from the folder structue before installing, then it would be easy.
hmmmmmmmm, it seems that this problem have no solution as (Finding emulator for cooked ROM)
Click to expand...
Click to collapse
Hey I have done the same previously I love the s2u2 applications so I have cooked my rom with all 3 apps of s2u2 i.e. S2U2, S2P, S2V.
I created packages from package builder, then copied all files to one folder.
removing duplicates with latest one.
Also I changed the initflash file for the locations which is created by the package creator with the new folders path.
Then also I added the all item tag in XML to detect DSM files of the respective apps.
Make sure you have registry hack for installing third party apps in your ROM packages.
Enjoy... you will get all your S2U2 apps in your ROM.
Right now I dont have the folder I will upload it tomorrow if anyone wants.
Hope this information is useful to you all.....
Please Dooooooo
bhushangahire said:
Hey I have done the same previously I love the s2u2 applications so I have cooked my rom with all 3 apps of s2u2 i.e. S2U2, S2P, S2V.
I created packages from package builder, then copied all files to one folder.
removing duplicates with latest one.
Also I changed the initflash file for the locations which is created by the package creator with the new folders path.
Then also I added the all item tag in XML to detect DSM files of the respective apps.
Make sure you have registry hack for installing third party apps in your ROM packages.
Enjoy... you will get all your S2U2 apps in your ROM.
Right now I dont have the folder I will upload it tomorrow if anyone wants.
Hope this information is useful to you all.....
Click to expand...
Click to collapse
Thnx a ton budy for this information.
really, i can't wait till tomorrow for this folder because i want to see all these modifications whitch greatly will help all ppl here.
please upload it ASAP.
also, what about Cooked ROM emulation? i hope there is a solution up there whitch i'm not aware about.
registry hack
bhushangahire said:
Make sure you have registry hack for installing third party apps in your ROM packages.
Click to expand...
Click to collapse
What you mean by registry hack? it sounds something new for me.
do you mean any registry editor? or it is another OEM Package should be installed along with the ROM?
robekia1 right, all file will be in windows folder, if you put it in the "program files" folder, the files exist in windows folder too, that is will be wasto your phone storage. Avoid put in the program files folder will be increase your phone memory.
Usually the default directory of the CAB file is in the progam file, and if you use OEM creator to that CAB, it will copied to Program file folder and exist in windows folder, to make only in windows folderyou can use this method:
1. edit the initflashdat result of OEM creator, delete all value of program file, or
2. Before you use OEM creator, edit the installation directory of CAB file, use wincab manager to do it, or
3. use wincab manager to extarct the files in the CAB, and registry, after that you can make .rgu, dsm, shortcut, manually and input the shortcut location in the initflash.dat file (I always use this method).
Usually every CAB file have different files with other, and if the have same file it can be same with the SYS file or the author/maker of the CAb is same. you can choose the latest version of that file if it happend.
While cooking even though we separate files inside different packages, but at the time when imgfs.bin is created, all the files go to \Windows folder. Thats why there cant be two files with same name even when they are in different packages.
Now some apps have common dependencies. Like the DirectShow and mHubVO dlls are needed by Youtube, as well as streaming media. Now what happens is, if you take two packages for these, sometimes the author puts the dependency files in both the packages so that if someone uses one package and not the other, it still works. This mostly happens packages that are made by converting a cab to a package. So if you cook these packages, you need to make sure that they are not putting duplicate files.
The same thing also happens with also happens with registry settings. Somtimes, two or more packages update the same regisrty keys in their .rgu files. SO we need to take care of those too and remove the lines that dont apply to the version of files we are actually using in our kitchen. This is a necessary evil and thats why cooking is not a child's play.
Once a ROM is flashed, and phone boots for the first time, the initialization process takes place. Now the ROM cooks have two ways to initialize their packages : using the .provxml files, this works if you have newer OEM* folders like from Elfin or Opal, it basically requires the Autoshortcut.exe file as well as newer HTCUtil.dll. The other way is the older initflashfiles.txt files inside the packages.
The difference between two methods is that using initflashfile.txt you can only copy files and create folders on the file system, but provxml can be used to perform many different things like registry values, applying themes etc.
So using one of the methods you copy your files to appropriate locations. Do remember that this process if done wildly can decrease the availabel free phone memory noticeably. Thats why we sometimes go a bit furthur and do some programming stuff to minimize this. You people sometimes dont even notice what is happening behind the scene.
I tell you one such experience. Google maps is a package that copies all its files to \Program Files\GoogleMaps but i noticed if i dont copy the files by deleting the initflashfiles.txt, and run GoogleMaps.exe from \Windows, it runs just fine. This works in pro user's rom but in Manila ROMs, the Maps tab of Manila looks for GoogleMaps.exe in Program files folder. So i had a choice to either copy googlemaps.exe into program files folder and waste 2 MB of phone memory or loose the functionality of maps tab of manila.
What i did was the third way i thought of myself. I created a .NET application called GoogleMapsStub.exe and what it does is it runs the googlemaps.exe from windows folder and passes all the information to it that manilla passed to it while running it. This exe is copied into the \program files\GoogleMaps folder by using initflashfiles.txt as GoogleMaps.exe. So now manilla is happy that it has googlemaps.exe in its proper place and i am happy too coz the new exe is only 3.5 kb in size You can verify this in v3.1.1 of VanillaManila rom. Look in the program files folder you will get the 4 kb googlemaps.exe, put it on your pc and check its version in its properties, you will get my name there And if you check the windows folder, there will be a googlemaps.exe of 2 MB size and a GoogleMapsStub.exe of 4 kb size.
So sometimes hacks like these are necessary in order to make a perfect roms. ROM cooking is just like food cooking, It may appears to be like just putting the ingredients into a cooker and light up the gas stove and wait for the food to cook. But if you try that for first time, your food will not be eatable for sure It requires a careful balance of salt, pepper and other things to cook a tasty dish I hope i have made myself clear
Wonderful
AMAZINGGGGGGGGGGGG PPL
latest buildos/ visual kitchen has option to delete duplicate file while cooking but
i will make new kitchen in future (not soon) because current kitchen work fine for me and i have lots of other work like android + building to rom from weekly leaked sys of wp 6.5
Thanks ankit360 for the visualkitchen9.7, i'm already trying to use it but the problem is: the ROM generated by the kichen is not working for GENE.
i tried another kitchen for the same ROM and it still working fine, the only problem with it is the duplicate
bhushangahire, i'm still waiting for you to upload your files.
also, what about the reg hacker?
Hi Karzy,
" What i did was the third way i thought of myself. I created a .NET application called GoogleMapsStub.exe " you answered one of my query unknowingly, when I had extracted your ROM, I saw there was GogleMapsStub.exe which was not present in any other ROM I had extracted. So I was wondering what that file was about !!! Now I know what it was.
Thanks a lot karzy for sharing this info.
You have been always good in explaining things indetail, which helps a lot for new comers like me.
I m glad that i am able to help my buddies here.
find the files below...
robekia1 said:
bhushangahire, i'm still waiting for you to upload your files.
also, what about the reg hacker?
Click to expand...
Click to collapse
Please find the files below sorry for delay.....
S2U2 Application OEM folder.
S2APPS.7z (786.47 KB)
Registry Tweak OEM Folder.
Registry__Disable - Security warnings when installing non-certified application.7z (849 bytes)
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
bhushangahire said:
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
Click to expand...
Click to collapse
i guess this ROM is for OLD gene???Correct me if i'am wrong...
yup for old
htc3400 said:
i guess this ROM is for OLD gene???Correct me if i'am wrong...
Click to expand...
Click to collapse
yup you are right this rom is for Old ..
If anyone want it for new gene please ping here I will cook it for new also....
Thanks
bhushangahire said:
S2U2 Application OEM folder.
S2APPS.7z (786.47 KB)
Registry Tweak OEM Folder.
Registry__Disable - Security warnings when installing non-certified application.7z (849 bytes)
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
Click to expand...
Click to collapse
Thanks a Ton bhushangahire for sharing those links.
I appreciate this.
Now, i'm gonna read them character by character
Alrighty, here we goo.
I was looking around for voice to text apps, and I came across one.. called "Tellme"
Now, I as I understand this wasn't exactly made for my LEO-usa.
BUT IT DOES WORK.
I have installed the .cab file for this app, installed it correctly the only way one could do it. Then there was a file I was told to download called NETCFv35.wm.armv4i.cab.zip
Framework im guessing? But I have a problem, I don't know how to install this.. its a zip file, and when I unzip the file it breaks down the cab structure into 192380192381203981203498712348971230489 freaking FILES!
How do I install a cab file that is compressed into a zip file? if you HD2 users want to try and pickup where I left off, here you go.
do a google search for "tellme for hd2" Click the result that has tmobile's forums on it.
Scroll down the forum replies till you see words and convo's regarding TELLME. and you'll notice there is two files needed, the framework, and the cab file for the app.
I got the app installed, but the NETCFv35.wm.armv4i.cab confuses me because its a cab file that is in a zip file..
lol, sorry if I'm sounding redundant. but damn.
Heres the two files, I'll attach them below.
delirium5 said:
Alrighty, here we goo.
I was looking around for voice to text apps, and I came across one.. called "Tellme"
Now, I as I understand this wasn't exactly made for my LEO-usa.
BUT IT DOES WORK.
I have installed the .cab file for this app, installed it correctly the only way one could do it. Then there was a file I was told to download called NETCFv35.wm.armv4i.cab.zip
Framework im guessing? But I have a problem, I don't know how to install this.. its a zip file, and when I unzip the file it breaks down the cab structure into 192380192381203981203498712348971230489 freaking FILES!
How do I install a cab file that is compressed into a zip file? if you HD2 users want to try and pickup where I left off, here you go.
do a google search for "tellme for hd2" Click the result that has tmobile's forums on it.
Scroll down the forum replies till you see words and convo's regarding TELLME. and you'll notice there is two files needed, the framework, and the cab file for the app.
I got the app installed, but the NETCFv35.wm.armv4i.cab confuses me because its a cab file that is in a zip file..
lol, sorry if I'm sounding redundant. but damn.
Heres the two files, I'll attach them below.
Click to expand...
Click to collapse
no worries. just download the .zip file, then unzip it into the the file "NETCFv35.wm.armv4i.cab". next copy this file and the tellme.cab file into your phone. run the NETCFv35.wm.armv4i.cab first and let it install. then follow by the tellme.cab. you're done.
yea, you have unzipped it twice, because winzip/winrar also see the .cab as a cabinet, or zip file, and opens it, when in fact that whole file is the windows mobile installer. extract the single cab file to desktop, copy it to your phone, click it in explorer on your phone.
Alrighty, I tried what you said..
I got the .cab file for the NET stuff on the device, attempted installation and it failed at the end, told me to close out of apps, and clear device space?
I have a little short of 1gb of Device memory left, and task manager did not have anything running.
Is it perhaps the ROM im using? I'm using the Energy ROM.
bumppp.