Yeas, Ive read the thread...
http://forum.xda-developers.com/showthread.php?t=293665
Click to expand...
Click to collapse
Does the info need updating, or do I need to do something different...
v3a [03-04-2007] - New RUU will make sure HardSPL-1.40 is installed before flashing the radio
Now the unlocking process is faster & safer
Click to expand...
Click to collapse
I have SPL-2.10 on my phone, not 1.40 as stated above....
v2 [12-11-2006] - updated to patched radio 1.16
Click to expand...
Click to collapse
Q: After finishing the process it still asks for unlock code, what should I do?
A: Make sure you have radio version 1.16 and run Herm_Unlock_v3.exe on your phone and select unlock option. If entering any unlock code fails, please repeat the unlocking process again (you did something wrong the first time).
Click to expand...
Click to collapse
My Radio is 1.38.00.01.. will using this downgrade it to 1.16??, or do I need to pu 1.16 on before using this tool...??
Ot, once it is unlocked, can I simply stick a new radio on it???
Do I alsoneed to have the working orange sim in their.. as if I put the t-mobile sim in, it is just asking for the simlock code...
As ther eis always a chance of bricking your phone, I just want to be sure everything is ok, before I do it..!! I have the offical wm6 rom installed.
Thanks
Anyone...???
So no one has used this to unlock a phone that has HardSPL-2.10, or a later Radio....??? or reflashed their phone after unlocking...???
Once unlocked, does it remain unlocked for good???
PATIENCE....let us answer when we can!!
Your SPL will end up being downgraded to 1.40.olipro......but thats not a problem as you can just flash HardSPL 2.10.olipro again.
Your Radio WILL be downgraded to 1.16 as this is a hacked radio image which allows the SIM/CID to be unlocked.
You really should update the radio once the device is unlocked since there are BIG improvments with the new ones.
ANY SIM card will work in the device once the device is unlocked....the sim pin pad pops up when the SIM card requires the sim pin code. Obviously if you know the pin you can turn this off in phone settings.
Soory for my impatience.. Ive been biting at the bit all day, after my contract ended and waiting over 2 weeks to sort a new deal out... I was so eager to get my handset up and running...!!!
Thanks for your information... I was unsure whether you could simply re-apply the radio and spl after the unlock....
Maybe this info could be added to the sticky.. after reading through the 50 odd pages, there were many such requests, with no answers....
So as I understand, downlograding to the hacked radio simply facilitates the unlocking, rather than providing the unlock, so flashing back up after, and replacing the hacked radio with a genuine one does not reverse the unlock...
Seriously though, this could do with being on the appropriate thread about SIM/Cid unlocking....!!
Discovering this site about a month ago, and what developers and contributors have done has breathed new life into what was already a great little device...
THANK YOU!!
Related
I know there is no free utility yet to CID unlock the G4 devices. Those of you that have unlocked your G4's at the IMEI-Check site http://www.imei-check.co.uk/m3000unlock.php Is this just a SIM unlock or also a CID unlock?
If it is a CID unlock are you now able to make a ROM backup using the R2SD method shown in post 8 of this thread? http://forum.xda-developers.com/showthread.php?t=258819&highlight=r2sd+backup
This is my main reason for wanting to CID unlock. I want to be able to make a full ROM backup with this method, before trying any new ROMs. My CID locked 9100 gives me this error "You didn't get the proper security level to download a specific image" when I try a R2SD backup
d0ug said:
I know there is no free utility yet to CID unlock the G4 devices. Those of you that have unlocked your G4's at the IMEI-Check site http://www.imei-check.co.uk/m3000unlock.php Is this just a SIM unlock or also a CID unlock?
If it is a CID unlock are you now able to make a ROM backup using the R2SD method shown in post 8 of this thread? http://forum.xda-developers.com/showthread.php?t=258819&highlight=r2sd+backup
This is my main reason for wanting to CID unlock. I want to be able to make a full ROM backup with this method, before trying any new ROMs. My CID locked 9100 gives me this error "You didn't get the proper security level to download a specific image" when I try a R2SD backup
Click to expand...
Click to collapse
Go ahead and you will be able to do r2sd backups and restore after CID unlock at imei-check.co.uk.
Nishad
So does this CID unlock the phone if it's a G4, you're a bit unclear?
IMEI check is SIM and CID unlocking. If you are gonna do it, see my post here.
yes... using the method availble at imei-check.co.uk will very much CID-unlock your device
NOTE: There's been a lot of posts regarding this subject but the fact of the matter is that you do in fact get your phone CID-unlocked at this website despite what you may have read in other threads...
What are the security or other implications of handing over my IMEI to them? Is that safe?
d0ug said:
What are the security or other implications of handing over my IMEI to them? Is that safe?
Click to expand...
Click to collapse
No worse than handing over your credit card info to them.
IMEI Check is a reputable company, and doing what they do, it is in their best interest to safeguard your information. Also, I've never seen any complaints against them that weren't about how much they charged for their service.
They DO intimate that they can re-lock your phone remotely if you back out on payment, but if you deal in good faith, I don't ever see that as a problem.
Of course, YMMV, but probably not.
How many..?
Hi,
I've heard that my device will be CID locked again after applying one of the ROMs. Does this mean I have to CID unlock my device again??
Just to be sure I can restore my backup ;-)
I've already paid for the CID unlocking, but it seems that the extended rom specifically NEVER installs. This, to me, seems like its not unlocked if that isn't working, or at least not fully unlocked. I've run the unlocking tool (from imei-check) 3 times now, I believe, and installed many different ROMs.
How can you CHECK if the unlock worked on a G4?
moonrock You may check CID having started Prophet in mode bootloader and having started mtty142 and take command info 2 - You see your CID.
imei-check does not do unlocking ExtROM this absolutely area miscellaneous.
arc said:
moonrock .....having started mtty142 and take command info 2 - You see your CID....
Click to expand...
Click to collapse
Could you please explain how to do it more clear? Thanks!
errmm, yeah that wasnt clear! i dont understand.
arc said:
moonrock You may check CID having started Prophet in mode bootloader and having started mtty142 and take command info 2 - You see your CID.
imei-check does not do unlocking ExtROM this absolutely area miscellaneous.
Click to expand...
Click to collapse
Check this thread http://forum.xda-developers.com/showthread.php?t=290831 where it's explained what arc is talking about in first paragraph
Second paragraph means that ExtROM isn't unlocked by IMEI-check because it's an independent partition of the DOC chip which is write-protected in G3 2.xx and all G4
HELP!!!
hi everyone I know im posting in the wroge thread but this site is really huge, I need any help cuz i begin to hate my ppc and im stiil a student and cant buy another one cuz my father is really anoying, so i got an i-mate pda2 which i really love its design but the prob. is wm2003se there is no other roms i can find + i dont know how to get this cid unlocker and any rom just any , i will be pleased v.much for help i want the links where i can find a cid unlocker and a new rom which can run manila or wm5,6 plz helppp :'(
i was gonna unlock my 8525 via pof's unlocker and downgrade solution when i read this post http://forum.xda-developers.com/showpost.php?p=1062526&postcount=7 I then figured it wouldnt hurt to just called cingular and see if they would give me the unlock code...i placed a call to cingular's international department and get them to send me the unlock code in less then 12 hours by telling them i was planning to go on a trip out of the country on sunday and what is the soonest i could get the code..i then acted like i didnt know anything about getting a phone unlocked and he recommended that i place international roaming on my phone yada yada yada..... i declined and asked if i would still be able to roam while out of the country.. he said yes... i said thats fine.. but i would also like to have the phone unlocked incase i would like to buy a sim and use it for making local calls in the country that i will be in.. he said sure no problem... he submitted a request and in less then 12 hours i had the unlock code in my mailbox... i hope this helps anyone on cingular trying to unlock there phone with no modding...
now the second part of this thread is relating to the bootloader versions.. now i know that my bootloader is 1.6.. is it necessary for me to still use pof's method in combination with the downgrade in order to supercid unlock my phone in order to flash the rom with different hermes roms even tho' my phones sim is unlocked....is it possible to use pof's file to supercid unlock and then reflash back the same radio with no patch and same cingular rom to have the phone back to fully stock out of the box with the exception of having it be fully unlocked with the sim and sid..... also.. .is the same necessary for flashing the radio with different versions??..from what i understand you can "unhind the ext roms to see them but not activate themm.. and in order to use the features in the extended roms do i need to be supercid unlocked in order to unlock the ext.roms??i have fit4cat tweaker installed already and it makes the changes making me feel like i am accessing the ext.rom features already... and if so when i cid unlock my phone can i just pick and chose the .cabs to install from the different options on the different roms... .. i am not in an area that supports Edge .. but when i am will it display so on my screen with a E? or is that a mod i will need to do as well.. and i also see a feature in fit4cat that enables hsdpa.. i thought my phone would default using the connectin if it was available.. am i wrong.. and the ptt hack that someone on this forum created as a .cabs.. do i need to have it supercid ulocked to use that as well...
im sorry if alot of you have answered these questions time and time again.. i have really tried to answer my own questions for the last 8 hours or so with reading the forums and wiki's.. after a while it becomes a blur...
Ps. when using mtty.exe and i hook it up following exact settings and instructions when it connects it says CLIENTCLIENT then i hit the I to type info and i get CLIENT again.. no prompt.. ??help<< i was not in bootloader mode...oops.. it worked fine after i placed it in bootloader mode
thanks in advance
Abe
honestabe said:
now i know that my bootloader is 1.6.. is it necessary for me to still use pof's method in combination with the downgrade in order to supercid unlock my phone in order to flash the rom with different hermes roms even tho' my phones sim is unlocked....
Click to expand...
Click to collapse
Yes, you need to patch the radio to CID-Unlock. It doesn't matter if the phone is SIM-Locked or not. This needs bootloader 1.04, you can have it by flashing cingular's 1.30 rom.
honestabe said:
is it possible to use pof's file to supercid unlock and then reflash back the same radio with no patch and same cingular rom to have the phone back to fully stock out of the box with the exception of having it be fully unlocked with the sim and sid..... also.. .is the same necessary for flashing the radio with different versions??
Click to expand...
Click to collapse
Yes, it is possible but you need to downgrade your bootloader to 1.04 for this, otherwise you won't be able to flash any radio (patched or not).
honestabe said:
from what i understand you can "unhind the ext roms to see them but not activate themm.. and in order to use the features in the extended roms do i need to be supercid unlocked in order to unlock the ext.roms??i have fit4cat tweaker installed already and it makes the changes making me feel like i am accessing the ext.rom features already... and if so when i cid unlock my phone can i just pick and chose the .cabs to install from the different options on the different roms...
Click to expand...
Click to collapse
You need to have a SuperCID phone in order to UNLOCK the extrom, this means WRITE to it (i.e. delete cab files you don't need and use it as storage space, or put signed cab files from other ExtROM). If your Hermes is not SuperCID you'll be able to unhide it, but will not be able to unlock it.
honestabe said:
i am not in an area that supports Edge .. but when i am will it display so on my screen with a E? or is that a mod i will need to do as well..
Click to expand...
Click to collapse
It will not display "E", and the previous hack used in HTC Wizard for this doesn't work on Hermes. It displays "G" if you are under GPRS or EDGE coverage and "U" or "3G" if you are under UMTS/3G or HSDPA coverage.
honestabe said:
and i also see a feature in fit4cat that enables hsdpa.. i thought my phone would default using the connectin if it was available.. am i wrong..
Click to expand...
Click to collapse
Cingular ROMs have HSDPA enabled by default, you don't need to use that option from fit4cat hermes tweaker (it won't hurt if you do it), but it is there because not all roms have HSDPA enabled by default.
honestabe said:
and the ptt hack that someone on this forum created as a .cabs.. do i need to have it supercid ulocked to use that as well...
Click to expand...
Click to collapse
No, you don't need SuperCID to use this.
honestabe said:
im sorry if alot of you have answered these questions time and time again.. i have really tried to answer my own questions for the last 8 hours or so with reading the forums and wiki's.. after a while it becomes a blur...
Click to expand...
Click to collapse
ALL I answered is in the wiki, but probably explained in a bad way because I am not english native speaker, I would be very glad if you EDIT the wiki and explain it better/clearer than it is, so other people like you can understand it next time they read.
one more question... if i flash back to the cingular rom that is a 1.6 bootloader after i have done this whole process am i still able to flash to whatever i want providing that i have flashed from 1.6 to 1.4 unlocked sim and supercid previously.. basically does this flash the cidlock back on it.. or must i keep the bootloader in 1.4 in order to keep flashing roms
On another note.. i read these forums all night for the first time and i want to tell you Pof that you are the most helpful person i have ever come across on ANY forum board and the xda members are lucky to have you here... also extremely intelligent... thanks
extremely grateful
Abe
The main reason to SuperCID your Hermes is to be able to flash "whatever" rom you like, without having to bother with bootloader versions. If you use SIM & CID unlocker v2a to make your Hermes SuperCID it will be SuperCID forever, so the CID lock will not be back anymore.
Basically, after your device is SuperCID you only need to go back to bootloader 1.04 if you want to be able to flash extracted radio-upgrade only, as this is not possible with other bootloader versions.
is the patch u put in the radio overwritten when i apply a new rom???
the radio file is included in the rom you flash right?
or you can just find the radio file and flash that alone??
does the radio flash require it to be hooked via active synch or dissable
i have gotten Error 120 country id error twice now trying to flash ur radio flash.. any advice?
i should be outa noob questions shortly..
thank you again
if all goes well(im in the process of this whole precedure as i type...30% now) i shall write this in the wiki in n00b language...
honestabe said:
is the patch u put in the radio overwritten when i apply a new rom???
the radio file is included in the rom you flash right?
Click to expand...
Click to collapse
Yes and yes
honestabe said:
or you can just find the radio file and flash that alone??
Click to expand...
Click to collapse
Yes, see wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
honestabe said:
does the radio flash require it to be hooked via active synch or dissable
Click to expand...
Click to collapse
It doesn't really matter, as the RUU will kill activesync anyway, but I always recommend to disable activesync and start the update from bootloader mode (tri-color screen).
honestabe said:
i have gotten Error 120 country id error twice now trying to flash ur radio flash.. any advice?
Click to expand...
Click to collapse
Follow all the instructions, read and read
honestabe said:
if all goes well(im in the process of this whole precedure as i type...30% now) i shall write this in the wiki in n00b language...
Click to expand...
Click to collapse
Thanks, that would be great!
And good luck with the flashing
presto everything is working fine all done..
when it gave me the error i just closed the flash and restarted it...(just like what it said to do in the "if your having problems flashing post"
ran ur unlocker supercid program.. and voila
anyway.. ill write up somethin real user friendly..
thanks again Pof
-abe
Hey abe,
thanks for the tip on getting my phone unlocked...It worked like a charm.
okay, being a newbie to the Softbank X01HT, I went through the forums, FAQs, and Wiki as much as I can...
anyway, i checked with imei-check in regards to unlocking my SIM; however, their method unlocks the SIM, as well as SuperCID the device. from what i undertand - SuperCID the device would void the warranty, correct?
this being the case, if i do use imei-check, is there a way to "undo" the SuperCID?
similary, i can also use a process that only unlocks the SIM, ie., pof's free unlocker... however, as ive read, this is NOT compatible with Softbank X01HT models released after December 2006. right?
in this case, are there any other ways to unlock the SIM?
----
on the other hand, all i need is to unlock the SIM (no need for a SuperCID) - if there are people out there who have a better idea in going about this, please teach me...
thanks in advanced...!!!
PS: here is my Softbank X01HT
ROM: 1.33.761.4
ROM Date: 11/10/06
Radio Version: 1.14.00.10
As far as I know once you supercid it can't be reversed. I believe that if you use the hard-spl to flash, supercid isn't required anymore.
Now onto the unlocking the sim. I'm also a little bit confused on the options available. Please one of the gurus here step in and offer an explanation
garydempsy said:
As far as I know once you supercid it can't be reversed. I believe that if you use the hard-spl to flash, supercid isn't required anymore.
Now onto the unlocking the sim. I'm also a little bit confused on the options available. Please one of the gurus here step in and offer an explanation
Click to expand...
Click to collapse
the way i would understand is that if imei-check.co.uk unlocker is used, there arent any issue or problems. can anyone confirm/verify this?
however, for my needs at least - all i need is for my X01HT to be SIM unlocked. i dont need it to be SuperCID, nor i need to flash any other ROM. and unfortunately, imei-check cannot do this (there are NO options for a SIM unlock-only, or a SIM unlock and SuperCID)...
i hope any of the gurus here can help, or at least confirm this understanding...
old X01HT can perfectly unlocked by V3.
how do you know the date about your X01HT produced?
lyerx said:
old X01HT can perfectly unlocked by V3.
how do you know the date about your X01HT produced?
Click to expand...
Click to collapse
well, if you look at the System Info tag in Settings you'll see a date... mine is at:
>ROM: 1.33.761.4
>ROM Date: 11/10/06
>Radio Version: 1.14.00.10
Just for clarification:
imei-check temporarily SuperCIDs your device, you lost the SuperCID status when you flash another radio on it.
With the 1.16 patched radio included in my unlocker you also temporarily SuperCID the device, then you have to run the exe file on your Hermes which will let you choose if you just want to SIM-Unlock or both (do the SuperCID sticky forever). If you don't choose the SuperCID option, then the SuperCID status is lost when you flash another radio on it.
I have had reports of people unlocking without problems X01ht devices with v3, but some others reported they can't boot OS after unlocking, and as I can't test it I put the warning, so do it at your own risk.
Anyway, I'm planning to release a new unlocker version soon
pof said:
Just for clarification:
imei-check temporarily SuperCIDs your device, you lost the SuperCID status when you flash another radio on it.
With the 1.16 patched radio included in my unlocker you also temporarily SuperCID the device, then you have to run the exe file on your Hermes which will let you choose if you just want to SIM-Unlock or both (do the SuperCID sticky forever). If you don't choose the SuperCID option, then the SuperCID status is lost when you flash another radio on it.
I have had reports of people unlocking without problems X01ht devices with v3, but some others reported they can't boot OS after unlocking, and as I can't test it I put the warning, so do it at your own risk.
Click to expand...
Click to collapse
thanks for the reply, pof...
on the other hand, what do you mean by "temporarily SuperCIDs..."...? would it mean that the device is still registered to Softbank and at the same time you can flash another ROM?
all i want though is just have my device SIM-free so i dont have to deal with exorhbitant roaming rates when travelling abroad... not much privy with playing with other ROMs, yet; as well as not wanting to void my warranty.
Anyway, I'm planning to release a new unlocker version soon
Click to expand...
Click to collapse
really? what would be the new stuff that youd be adding in?
I am an owner of a BEFORE DEC. model X01HT and sim unlock&SuperCID by pof's v2a unlocker.
Since April is coming, I have to update the rom to use the net according SB. I wonder if the sim-unlock will remain after I update. i hope so sadly.
I, TOO, don't mind the SuperCID.
Anyway, thank pof ad waiting for the new unlocker.
ps: if i use another sim card other than SB, I can use WIFI or BT only about two minites continiously. then it will be disconnected automatically. Anyone else has same experience? I use SB_USIM to avoid the annoying popup.
I submit this post via my X01HT.
to use the PK ROM?
I have searched and searched and not found an answer.
This is an unlocked 7501 from the US. Do I need to use the OliPro Unlocker or something else? Can I just load the ROM directly from a flash card?
Thanks,
-Alex-
bairda said:
to use the PK ROM?
I have searched and searched and not found an answer.
This is an unlocked 7501 from the US. Do I need to use the OliPro Unlocker or something else? Can I just load the ROM directly from a flash card?
Thanks,
-Alex-
Click to expand...
Click to collapse
Most definitely. Yours is only SIM unlocked. You need to CID unlock with OLIPRO's unlocker.
Thanks..
Used the new 3.0 OliPro unlocker with all 3 steps and had no issues.
-Alex-
bairda said:
Thanks..
Used the new 3.0 OliPro unlocker with all 3 steps and had no issues.
-Alex-
Click to expand...
Click to collapse
No worry mate. Glad that your journey was smooth.
Sorry for the newb question, but what do I get by unlocking it? thanks.
Unlocking enables you to put a new ROM image in place of the factory ROM that is on your unit.
ROM images, such as the PK Dual, can then be uploaded and installed in your Athena/Advantage giving you greatly increased functionality along with integrated updates for your hardware drivers.
While you could manually gather almost all of the updates that a ROM contains and install them yourself, the ROM conveniently packages these together and has been tested to make sure it is stable.
Unlocking using the new OliPro unlocker is a relatively painless and safe process that will open your device to ROM updates while creating a environment that makes it difficult to "brick" the device when you have problems with new ROM loads.
HOWEVER, make damn sure that your carefully read up on the process of readying your device for the unlocker, ALWAYS use the LATEST and CORRECT unlocker for your device and proceed cautiously. IF you aren't comfortable with the unlocker procedure, then DON'T try it. You can literally render your brand new $800 computer unusable with the only choice but to send it to HTC to be RMA'd and get a new one. Believe me, I know!
After the initial unlock procedure, your device becomes practically "bulletproof" for future ROM updates. But during the unlock procedure it IS vulnerable to problems.
Hope this helps!
-Alex-
although u should run the 3 steps on the unlocker,i only ran the 1st and 2nd coz the x7501 is simunlocked from the factory.word of advice,take the proper precautions and read ALOT before doing anything.enjoy!
Cool thanks for the info!
The seller said it is unlocked. How can I verify it?
I read CID Unlocking and Sim Unlocking. How can I confirm both.
Also, how can I tell which version of the radio?
and which version of SPL (3.5 or 1.2)?
Or is there any great tutorial I can setup for the AP4?
I am starting to get confused.
the seller probably was not lying as it is easy to do (thanks to olipro - cmonex/olinex) but if you want to check, press and hold your camera button, whilst doing that press the reset button, and tell us the details on the rainbow screen.
this will also tell you if it is SPL 1.1-1.2 or 3.5
when your done just press reset again
LOCKing is related to SPL. SPL is a part of the "bios" (just to use the PC paradign IPL and SPL are "extended bios" ), then you have the RADIO section of the rom and the OS (WMxx)
Other part of the rom are the EXTENDED ROM (where the file needed for operator customizzation during first install are stored) and splash screens (a FULL ROM means IPL,SPL, SPLASH 1, SPLASH 2, RADIO, OS, EXTENDED ROM).
This "bios" , called SPL can receive commands from RUU (Rom Update Utility, the sw used to flash the rom file). ROM info are "wrapped" in a .nbf file and the RUU, interacting with SPL with some batch commands, flash into the device memory the ROM parts (Splash are flashed in their locations, os, radio, ....) RUU opens the .nbf file, read abatch command file, and send the commands to the SPL to flash the rom sections
Now you can understand how a custom ROM is done: using a "kicken" you can prepare a .nbf file containing the data and the batch command file used by RUU to flash it in the right location of your ROM (SPL, RADIO, OS, SPLASH, or all together) SPL is a KEY part for this process.
With the stock RUU IPL and SPL some controls are done before flashing, first of all device's language and vendor ID, so called CID. If they doesn't mach with the ROM file you will have an error and RUU exits: wrong language, wrong vendor, ....
Flashing a custom SPL you avoid this check (or it sets the CID to "supercid", it means I accept every language and vendor ID)
The SIM unlock (phone working with all SIM card) needs something more complex. In the ATHENA FORUM whe have ATHENA UNLOCKER, from OLIPRO, for SIM Unlock and CID Unlock and ATHENA WRAPPER, just for CID unlock. They will update the HTC SPL to OLIPRO 1.2
Hi sergiopi,
Your post is so concise. You told us the whole theory it may take me more than a day to find. You have the potential to be a book author. Thanks anyway.
Questions:
1. How can I tell whether the sim is unlocked?
2. How can I tell whether the cid is unlocked? Or it is no harm to run the ATHENA UNLOCKER again?
3. What is the different btw SPL 3.5 and 1.2? Should I update it? I am planning to run the AP4.
Thanks again!
Did you completely miss my previous post, if you follow the simple instructions. I gave you earlier, we will be able to answer all your questions.
ice_coffee said:
Did you completely miss my previous post, if you follow the simple instructions. I gave you earlier, we will be able to answer all your questions.
Click to expand...
Click to collapse
To check if your Athena is SIM Unlocked take a SIM from your friend's phone who is in another network and put it in your Athena. If it refuses to accept the SIM then it is locked and you have to unlock it. If it accepts the SIM and lets you place a call, it is SIM unlocked and most probably CID Unlocked. To check if it is CID unlocked just do what ice_coffe says.
I didn't miss the post from ice_coffee. My Athena is still in shipping. I just want to get more info first. Besides testing with a real sim card, is there any method we can run from the machine?
alui said:
Hi sergiopi,
Your post is so concise. You told us the whole theory it may take me more than a day to find. You have the potential to be a book author. Thanks anyway.
Questions:
1. How can I tell whether the sim is unlocked?
2. How can I tell whether the cid is unlocked? Or it is no harm to run the ATHENA UNLOCKER again?
3. What is the different btw SPL 3.5 and 1.2? Should I update it? I am planning to run the AP4.
Thanks again!
Click to expand...
Click to collapse
Thanks, the post is for you and for other newbies, to help everyone to understand. This is a DEVELOPER'S forum, we like smart users!
alui said:
Hi sergiopi,
Your post is so concise. You told us the whole theory it may take me more than a day to find. You have the potential to be a book author. Thanks anyway.
Questions:
1. How can I tell whether the sim is unlocked?
2. How can I tell whether the cid is unlocked? Or it is no harm to run the ATHENA UNLOCKER again?
3. What is the different btw SPL 3.5 and 1.2? Should I update it? I am planning to run the AP4.
Thanks again!
Click to expand...
Click to collapse
Listen Alui. The question numbr 3 shows of your post shows that you are realy a noobie. So if you are still waiting for your new device, do not waste your time but start reading. If you already decided that you want to go for AP4, then did you realy read the AP4 thread from first post? I am almost sure, you didn't.
So please remember, if you do not know what you are doing then you have a big chance to convert your super device into a brick.
And once more, if you browse this forum, you can see how many threads is there, and how many post is in each thread. If you see this you should be sure that you are not the first person here who just got his new device. All your questions were answered many times here so just read and read and after a week of reading start to plan what to do next.