I have tested the PDAViet 4.0.0.0.5a last week and now I'm using the PDAViet 4.0.0.0.6, it work's smoothly.
With the dialer in the 4.0.0.5a the smart dialing can show contacts with accented caracter (like á or é), with 4.0.0.6 the smart dialing only show standart caracter.
The link with my bluetooth headset in the two versions have a small "problem". I have car kit parrot CK3100 and if i have a call and turn on the car i cannot transfer the call from the prophet to the car kit, the phone and the car kit connects but the kit mute the radio and the call remains in the phone, in the WM5 the call transfer was automatic. I think its a "problem" with the bluetooh manager.
How can i fix this, any suggestion?
Thanks
Related
Hi Folks,
I use a Qtek 2020 with the configuration listed below:
- Microsoft PocketPC 4.20
- ROM 1.75.04ITA
- Radio 1.14.00
- Microsofot original BT stack
- Logitech bluetooth headset
- Leadtek GPS bluetooth receiver
- TomTom navigator 5.20
and all works fine, I make/receive phone calls thru the BT headset, using TomTom with GPS BT receiver in the meantime.
The only two things I can't do are:
- To hear music from Windows media player, in my BT headset.
- To hear Tomtom vocal instructions in my BT headset, the vocal messages are always sent to Qtek speaker.
I think these issues are from the same problem.
Any suggestions about how to solve it?
Thanks,
Valerio
Hi, i have the Underground WM6 ROM, and installed the Cyberon Voice Dialer 1.1 (the some that come with my WM5 from factor room), and when i press the the headset, to say a voice command, just the phone (with WM6) show my the dial pad, but not the windows from Cyberon to say the command, early when i used the WM5 Room, that work fine.
And another little cuestion, on WM5 i installed a soft that permit redirct all the audio from the device acroos the bt audio to the bt headset, on WM6 this soft works but (as ex.) when i open de PocketMusic, o WM Player, works fine, but when i close these software (the players), close also the redirection of the audio to the bt headset, some one know some trick to it do not pass again ? or works as WM5 room.
Thank's a lot.
PD; I see o some post, some file .cab that permit that when ones press the bt headset works the Cyberon, but i lost these post.
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
When I connect my Motorola HS820 (Bluetooth Stereo Headphones) to my Charmer with WM6 TouchFLO _GER ver. 2.7 BETA, I can only listen to music but when it comes to phone calls, I doesn’t work.
Please Help…
please help.....
I upgraded my 8525 from WM5 to WM6, and my Lubix LC1 headset no longer supports picking up incoming calls while I'm listening to music.
If I'm not in WMP, I can initiate a call with the LC1 but I cannot hear the other party nor can they hear me.
Has anyone experienced a similiar problem?