problems after upgrading with fantastic b4 - JAMin, XDA Neo, S200 ROM Development

hey there!
First of all, a big congrats for b4. It's made my Qtek S200 one of the most complete phones I've ever handled. Using for a while now, I've decided to ask you guys about two problems I've had. First, my phone has stopped vibrating. I know it's not a physical problem since I downgraded to my original rom and the vibration started working again. But once I upgraded to fantastic b4, no vibration.
2nd problem is I'm having trouble activating both bluetooth and wifi. For bluetooth, the only way I can get it to activate is by clicking the bluetooth at the bottom right of the today screen, and that just after I've done a soft reset. There's no way I can get it to activate using the Comm Manager screen. Now for wifi, I've the same problem. I can't get it to activate even after doing a soft reset.
Anybody has any ideas for my problems? Thanks for letting me know.
p.s. I've installed the PCMKeyboard which is an emulation of the iphone keyboard and now my ppc is uniquely thumb dependant!

I installed gulum's Touch v6 and now both the bluetooth and wifi are working correctly. However still nothing for the vibration...

Related

O2 XDA II Hangs

Hi guys,
I have just bought an o2 xda ii and am having serious problems
was trying to establish a bluetooth connection with nokia 6600 and it just froze displaying the today screen
now xda hangs after switching on and nothing works only the bluetooth light keeps on flashing
cant try anything as it doesnt function at all.
Can anybody help
Isn't There anyone who can help me...??????
Isn't There anyone who can help me...?????? :roll: :roll: :roll: :roll:
when you mean turn on do you talk about turn on as in turn on the top power connector
or a softreset ?
if you mean top power connector then that dont reset the pda you need to do a softreset
if you did mean a softreset then i dont know any other way then a hardreset which of cause delete all your data
Inderts the stylus in the reset hole, if that doesnt work then as the man said you will need to do a hard reset and all data will be lost, hard reset is done by pressing power while inserting stylus in reset hole.
Hi
Thanks for yr reply
I have aslo tried a hard reset but no luck
The device switches on and freezes on the blue O2 screen or sometimes goes thru the setup procedure & freezes at the today screen
Tried it a couple of times
Is there any other way please let me know.
Thanx again :? :? :?
Which ROM do you use? You can try to flash your ROM. There are plenty of treads on this forum on how to do this. Make sure you don't use a USB hub when connected to flash you're ROM. Your MDA II must be connected to a normal USB connection (I learned it the hard way....)
Wouter
Hi
Sorry for the late reply as i was out of town
Dunno exactly how to identify the rom version but when switched on it shows
R 1.05.14
G 1337.14
D 1.03.00 USA
Can u please suggest what to do
Thanx
You can see which ROM version you have by going to:
Settings, System tab and then Device information.
Mine says:
ROM version 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
So I guess you can do a ROM upgrade. To find out how to do it, just do a search on this forum for ROM upgrade and you'll find detailed describcions on how to do it. Make sure that your device is not connected via a USB hub otherwise you can have some trouble getting it done.
Wouter
Thanx for the prompt reply but the problem is that the device starts goes on thru the new device setup programme & hangs nuthing beyong that
So am unable to go to the system settings
Is there any other way i can see the rom version...
Well the colors at the beginning tell you which ROM you have (but are only very short on the screen so hard to read) but you can defenitely upgrade.
Wouter
No Bluettoth Hardware Installed Error Msg
Hey, this sounds like the same problem I have too! I have just posted a new subject in the "Using It" section of this Forum. Does your device also suffer from the following i.e. when the software ha loaded and you hit the bluetooth icon, does this error message come up "There is No Bluetooth Hardware Installed on this Device"? Pls read my post below.
"I have an XDA II, bought from the UK. I live in E. Africa so sending it back is a hassle. EVer since I bought it, although it was OK for a few days, a msg then came up saying "There is no bluetooth hardware installed on this device". This means I cannot put b/t on or off. Also, it affects the performance of the XDA II as it crashes frequently and loses ActiveSync connections frequently. The odd thing is that SOMETIMES, after a hard reset, it's OK again. But then when I do a subsequent hard or even soft reset the same problem occurs! So it DOES work. But not consistently. I conttacted O2 by email & tel. They were semi-helpful. I returned the XDA II to the O2 repair centre in London by courier (expensive). It came back, apparently repaired, but they had addressed the wrong thing and the problem still persists! I am loathe to sending it back without trying something for it - if you have any suggestions. Perhaps I can try a Rom Update or something to see if it sorts it. Even O2 are baffled, but I do not have the privilege of sending it off again because of where I live. Any suggestions or advice please? Many thanks. "
'Frozen' O2 screen with bluetooth light flashing
Hi to all,
I 've been having similar problems since I got my unit last November. You may be able to relate with my problems.. screen won't respond to any taps.. when you send SMS, the 'Send' button freezes... tried soft resetting, sometimes lucky, gets back to normal... at worst, does a hard reset...
after a few months of no reliable answer from local and foreign XDA help.. i'm used to either removing my battery/sim.. wait for awhile.. try to find a place where there's better network signal.. then, puts back the SIM and battery.. many times a get lucky by doing this... but there are also times that I had to do hard reset.. like two hours ago..
Hopefully, some help will come ...
For those who have yet to develop a routine to address similar problem, you may try mine...
Helpless xda II fanatic(???)
Archel Angeles
I have similar experience too. I got my XDAII last November, it runs smoth without a single hang for the first month until one day in January, while using it reboot by itself, after that day the device will just reboot anytime anywhere!
Thinking that this might be caused by some installed softwae, I hard reset my device. After the initial setup then it hang while running the auto installation from the extended rom saying that some file is missing. I hard reset again and it still hang while running the auto installation but saying another file is missing. On the day alone, I hard reset my device for more than 10 times! Each time it will either hang on the O2 startup screen or during the auto installation. Until finally one time manage to pass through the initial setup and auto installation.
On the second day, I quickly bring my set to the service centre for repair, while I describe and showing the faulty set to the service officer, the device self reboot for another couple of times.
I took back my set two days later, the service officer told me they cannot find the fault of this so they re-flash the rom for me, and they have tested it with internet browsing, mms, sms etc without any problem.
The 'repaired' set works fine for another one month until couple of week ago it start to hang during some incoming calls. When call was received, I press the answer key to answer the phone, the device would just hang with the ballon still showing on the screen, i'm not able to answer the call at all.
Last Friday, I finally hard reset the device again and re-install some my software applicaton and games. Second day morning while I was waiting for my friend, I start to attach photo to my contact, just when I attached the first photo and click on the save, the device hang! I press the soft reset button and the screen goes off without rebooting. I press the reset button again but the screen just won't come back. I even took out the battery and put in my backup battery, still the screen refuse to come back! The screen only come back when I performed a hard reset.
Today i found another problem with the device, the free memory is getting lesser and lesser by itself! Just before I type this reply, I soft reset my device and leave my device on the momory status screen, the allocated momory for the program showing 63.02Mb, in used 16.96MB and the Free momory 46.06MB. Now the in use memory increases to 30.75MB while the Free memory drops to 32.27MB!! I did not run anything in the background, I did not even tough my device!!
Anybody here can help save my device?
I have the same problem now. It is really a nightmare for all of us!!!
Exactly
Have a very similar problems 4 days in the row. Self-Blackhangs without any knowing reason. Impossible to use device longer then 10 min. HELP!!!
P.S. Some days before I try to uninstall Intellisync, wich I try, but does not use for a long time. Uninstall was unsuccessful cause .exe was "in use". There problems begins. May be. After one of hard-resets I remove .exe manually and then uninstall prog, but problems persists.
Hi guys, Fortunatly I do not have the same problems with my XDA II but I was thinking maby it is a type of software that has been installed on the device, I have noticed that some apps can cuase VERY strange things to happen (Even some THEMES!!!).... LOOK out for this..
Maybe you could try and run the XDA II after doing a hard reset as bare as possible... As in not installing any other themes or thirdparty software for a day or two and see if the device still gives your any problems... Will be interesting to find out.. I have had resets on my XDA II from using some themes avalible from the O2 website (that users have made not O2, but still) and since using the default theme I have not had a crash or a reboot since... (THIS TOOK ME FORVER to find out)... but might be worth a try..
Keep us all informed how you go with things.. Hopfully its just a pice of software or somthing simple like that...
GOOD LUCK ALL!!!
So, guys, I think that there is a HW problem. MDA freezing during initial install or during HardReset before install. Maybe "motherboard" is microbroken or so on.
Week ago I return my MDAII to T-Mobile and they will repair it to some way. I will report this way to you all as soon as possible. Let we see.
V.
Hi all,
I have the following devis info of mine:
ROM version 1.66.00WWE
ROM date: 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.101
This Rom works great, just search for it and upgrade!!
Wish you all luck!!!
sounds a lot like the problem I'm having.
Can any of you guys install a new rom at all? mine freezes up and activesync disconnects the second it does... So I guess when flashing your rom and having it freeze up on you, you'd be even further from a solution... thoughts pls
I fixed it guys...
seems a corrupted rom was the problem hitting bootloader mode (power + action + stylus) and installing a new rom fixed my problems
let me know how it works out for you guys

Mogul Freeze/Lockup

I've been trying various versions of dcd's mods hoping to remedy a problem with my mogul. It seems that my unit locks-up/freezes when all of the following are true:
1. Bluetooth is on
2. Phone is locked
3. Goes into sleep mode
When i try to awake phone; none of the buttons work; simply black screen and needs a soft reset. This does not happen all the time, just enough to be annoying.
Any thoughts? Is this a radio 1.47 problem??
Thanks guys.
bump. i have the same problem with DCD 1.6.8 Rom. i thought it was codyppc battery/performance hack so I uninstalled that(still happened), then i thought it was s2u2 so i uninstalled that( still happened today).... so any ideas?
can we verify whether this happens on dcd_titan_1.6.10 rom with NO software, tweaks, etc etc installed? it does not happen for me (i have been using BT lately) but that doesnt mean it wont happen for you guys.
Are you by anychance using S2U2 with the Power Off setting?
I was having this problem, and since I've set S2U2 not to Power off the phone, I have not had this problem. Being going well over 24 hours now.
Mine also freezes/locks up from time to time. I'll make the changes in S2U and see what happens.
Sorry for the newb question, but what is S2U?
got it; slide to unlock.
Is this app worthwhile?
I'm running 2.17 ROM and I get this error, although I'm NOT running S2U2
I have got the same problem. I just flashed to custel 1.1 6mb pagepool (awesome rom for alltel users) had no time to install anything extra paired bt locked phone about 10 mins later tried to make call and it was froze. i did however find out if you constantly use the bt it dont freeze (I finaylly installed ms voice command and if i constantly ask for date or time it stays unfroze.).
edit: I just upgraded to radio v2.13 ( ftp://xda:[email protected]/Titan/Radio_Roms/titan_2.13_CDMA.rar ) totally cured bt reception problem on both ends but once again same problem phone freezes. helppppp!!!!!!

WM6 & WM6.1 Sound Problem.

hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
xborfi said:
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
Click to expand...
Click to collapse
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
dioxda2 said:
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
Click to expand...
Click to collapse
thanks for your attention. I am now downloading it and let you know the results. thanks
Kornad 3.1 faild
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
xborfi said:
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
Click to expand...
Click to collapse
I am currently using this 3.1, keypad tones working fine (do you mean this? ).... ( Mine is a G3)
1. Is your speaker works fine? ( like playing music...)
2. did you try a hard reset?
3. optional flash with the lazy tool,
4.
yes, I did all steps except 3. Ill upgrade with that and inform you the results.
BTW please press around 50+ time on keypad to here keypad tones. they suddenly stop! my device is G4. I know that G3 sre better than G4 in wm6&6.1
thanks
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
paul c said:
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
Click to expand...
Click to collapse
Thanks for sharing...
i'm having the same problems sometimes. it happens mainly after changing the volume via the up/down switch from off to vibrate or back to certain volume.
the solution is the same as in the first post is mentioned. go to sounds & notifications and there to incoming textmessage. play the ringtone. sometimes a second time doing that is necessary.
but as im testing many roms as well, it happens very often on wm6.1, not so often in wm6.
before i forget to mention, i own a G4 Xda Neo.
//edit: another problem i had once was after using Shadow Vista "My Edition"(wm6.1) from with the ring volume-tweak. during call i rised the volume a little bit and then suddenly my speaker stopped working. even a softreset hadnt solved that problem, then i switched often the volume and after MANY attemps i managed somehow to get it working again. i was kinda shocked
greets
guro
PS: somebody has also the problem when recieving messages and press a key to early that the orange flashled doesn't went off?
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
xborfi said:
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
Click to expand...
Click to collapse
Try a different WM6.1 ROM!
i tried lots of stuff to solve this issue...no luck at all, after flushing the stupid Thai rom, i lost the sound....still trying
well, I tried almost 90% of roms here. all wm 6.1 are having this bug . I found PDAviet 4.0.0.0.6 a bit better than other, the sound bug happens less in this rom how ever it is still there.
oh! i found this here!
http://forum.xda-developers.com/showthread.php?t=371926
it looks as if this problem is with all roms, I think there must be a way to fix it on this biggest forum. still searching and reading an trying roms!!
hey guys,
since I moved to wm6 I was getting this bug, specialy with the sms notification.
but there was one rom which I did'nt have this problem if I kept the default rigntones. it was "Prophet_S4V.19701.01_F".
i'm flashing Prophet_S4V.19213.01_C, hoping it is that good too. altough I had the micro based on the s4v.19213 and and it was driving me crazy with this bug, I couldn't make it ring...
looking forward to help.
cya
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
xborfi said:
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
Click to expand...
Click to collapse
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
dioxda2 said:
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
Click to expand...
Click to collapse
yes, i do hard reset by pressing comm + cam + soft > send button . each rom i try i first open key pad and press 30+ on it and i sadly see sound dissapear! it looks as if prophet is not compatible with wm6!
I am now back to the wm5 and eagerly waiting to see a solution or patch from the great developers here!
well. no fix yet pals?
i had some problem too and what I had to do is...
When ever I hold the pda, I will press the volume up button even in lock mode and if there's no any sound, that mean the sound already disappeared, I had to soft reset... I had this problem at least once in 2 days....
Hope there'll be a fix for this issue sooner...

FIXED: Answer button doesn't answer, data connection turns off after call

EDIT:
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
That post fixed my problem, as well as fixed the problem which the data connection turns off after a call.
Hey guys, sup?
I have a huge problem with my TELUS Touch Pro. Great phone, but just one problem...
Whenever somebody calls me, I can't answer the phone. The onscreen "Answer" button doesn't work, the Talk button doesn't work, pressing the Select button doesn't work...pressing the headphone button does, but sometimes my headphones are in my pocket, or sometimes they're not with me at all!
The only way I can answer them is by ignoring the call, and calling them back. It sucks big time.
Anybody have a solution? And no, I'm not hard-resetting my phone. It started doing this for my first call, so I'm pretty sure it's not my fault.
HEEAAALLLPPP!!!
Is this the stock ROM?
Do you have BT on and connected?
Mine started doing that yesterday. I did a hard reset and so far everythings back to normal. Still do not know what it was tho
I just had my TP replaced and the new one did the same thing, I did not notice until a few days later as I use a bluetooth headset and pushing the answer key on the headset worked. I had to RTN the device to make it work properly. Have not had a problem since. it has been aabout a week and a half.
Sometimes I've noticed this happens when my memory is tied up elsewhere, ie media player or something. Try soft resetting your phone every morning that might help clear it up.
I have had this happen with me on my Titan which I recently traded in for my Touch Pro, and also on my Touch Pro. I noticed it coincided with installing iGo8 GPS software on both. A hard reset was the only way I found to fix it. Uninstalling the software did not do the trick. I could be wrong about the software title I am blaming, but I have everything reloaded on my phone except that, and all is well. I do have a Slide To Answer incoming call screen now with the MightyRom 4.9.5 rom installed, maybe this is a work around, don't know for sure. If anyone else has more feedback, let me know. I would love to find a fix for it so I can use my GPS software.
Mine started doing this crap last night. I reinstalled the S2A cab and just let it go.
I am starting to think it might just be the telus network being a boatload of suck. Mine does it with the stock rom without any programs loaded from time to time. I am thinking it must be the tower failing to acknowledge that you want to answer the call, so the phone keeps ringing becuase it sees there is an incoming call but the tower ignores that you are trying to answer it. This is just my guess based on what I have read about CDMA, I wonder if any GSM users have the same issue.....
Do any of you have Advanced Configuration installed? This is what caused this problem for mine and my brother's TP. Uninstalling didn't fix it. Had to hard reset.
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
I can tell you that this will more than likely fix this for you. Mine was doing the same thing, applied this, done and shut! Good luck.
OMG OMG OMG thanks!!!! That also fixed the problem where it ended the data connection after the call.
Sorry I took so long, I THOUGHT I was subscribed to the thread...
Thanks again!

Wi-Fi wont start

Hi guys, I have the following problem with a tg01.
The Wi-Fi don`t want to turn on at all. When I try to start it, I got that loading wheel for a few seconds, then it is gone and the Wi-Fi is not turned on. Is it look like a hardware issue and can I confirm that it is a hardware failure? The phone belong to a friend of mine. At first it was running some French version of WM, dont know which one exactly. He says at this point everything was working fine. Then some "gsm guru" hold the phone for a month trying to flash it with WWE version and he got it back with WWE WM 6.1 but the Wi-FI and the GPS was not working. I took the phone trying to help. I flash it with ROM_TG01_29017_Shell_WWE - WM6.5
The OS is working nice and smooth, the GPS is back and working fine, but the Wi-Fi is still gone... so any sugestions how can I 100% confirm that it is a hardware issue?
Thanks in advance.

Categories

Resources