WIFI Connection is Not Automatic? - JAMin, XDA Neo, S200 ROM Development

Any can help resolve this. In WM5, the WIFI connects to networks that we set Automatically. But in the PDAViet 4.0.0.6 or WM6, it does not connect automatically?? Someone help. Can't find a solution.

I have the same "issue" with the Gullum roms. When I enable the WIFI to tries to connect, then the icon shows only antenna, no radio waves. Then go the the settings, wifi program and see your available network, connect and it connects fine.
But somehow, never automaticly. Its very weird indeed any suggestion to solve this would be great.

Or just press the powerbutton off/on and it connects automatically.

emmeborn said:
Or just press the powerbutton off/on and it connects automatically.
Click to expand...
Click to collapse
And that indeed works, very odd!

i have the same issue.any solution now?

apparently known wm6 bug. happened to all the wm6 roms that i used...
apparently no solutions as yet, will try on/off button when i get home!

Related

Does the Radio Version effect the Wifi

I'm having problems with my Wifi stop working after a minute or so even though it says it's connected.
I updated my Radio to 1.5 and back to 1.48 a few days ago and now I'm having problems with Wifi. I've done hard reset and factory reset on the router and still have the same problem.
Any ideas?
Thanks
Nope. Try using Wififofum to see if anyone in the area is using the same Wifi channel maybe. Otherwise try going to a wifi hotspot and see if your device can stay connected to that. Or resetting some of the power settings on your device, since if the wifi detects the device as 'off', it disables itself. just a few early morning ideas
thanks for the reply.
My wifi works perfectly fine at home, all my computers laptops stay connected.
The phone connects no problem, and shows it as connected all the time. But after a minute or so where its working normally and I am able to open web pages, all of a sudden pages cannot be loaded and I lose msn connection, but the wifi icon still says I'm connect, so does the wifi manager with excellent signal strength
I've just tried re-installing the original HTC WM6 Rom and tested the wifi with nothing installed on the phone (only sync'ed it) and still get the same problem.
Has anyone experienced this or anything similar?
You've got to consider that your laptop incorporates a much better antenna than your Hermes. So if you've got a low but still stable connection with your laptop your Hermes might not even see it. If you've got a medium connection with your laptop you might have an unstable connection with your Hermes.
The above is based on my own experience.
Even if I sit 2 metres away from my wifi router with full wifi signal strength on the phone the same thing happens.
wish u luck!
have you tried turning the wifi power saving to zero power saving mode, ie best performance, I find that with wifi in power saving modes its very irratic
don't know what I done, but its all working fine again now. Think it might have been the power settings on the phone
Radio 1.54.07
Yes it seems the radio does affet thw wifi and Bluetooth... have problems with both now. so going back to 1.50 it seems to be the most stabale of the new radios
THE RADIO HAS NOTHING TO DO WITH WIFI PERIOD END OF STORY! the Wifi drivers and such are in the Os.nb or ROM file not the radio file!
Radio
austinsnyc said:
THE RADIO HAS NOTHING TO DO WITH WIFI PERIOD END OF STORY! the Wifi drivers and such are in the Os.nb or ROM file not the radio file!
Click to expand...
Click to collapse
Ok so they are, changing the Radio is still affecting how they both work.. tried it few with diff roms and 1.54.07 radio with the same results. bluetooth and WiFi act erratic in all cases when 1.54.07 radio is installed yet with 1.50.00 works fine.. no problems

TC500 Wlan wont work

On my TC500 (HTC Prophet G4) the Wlan doesnt work anymore.
I tried several roms, but always the same, the small symbol in the taskbar doesnt blink and doesnt show any wlans. are there any ideas to solve this?
Please help.
mc_chick
Hi, I have the same problem... but I discovered if you turn off you Prophet for a long while, and after ,restart again and you need to enable flight mode, and disable BT ( if it is enabled) the Wifi work. But after connecting to a network and try to saw samo internet pages... the Prophet freezes...
It is an hardware problem? or a soft problem??
i also have a similar problem... i can enable mi wifi , the light is blinking...but cannot find any networks even not searches..and when i my manually create the network and i'm step away from the acces point it sas unavailable... it started when i was using the latest i-mate rom...then upgraded the touch VII and touch VIII for now and no change...i gave up on the wifi and just surfing with the gprs ... i'm thinking of an hardware problem...cause i cant see the wifi adapter in the device manager which comes with touch VIII but can see other network cards...waiting for a solution for 4 months by now...=( thanx in advance...

problem with wifi, is it dead ?

I Have JASJAM (Herm100)
When I Turn on, after Soft Reset/shut down, (Even hard reset), when I try to use wifi, here's whats happens:
1) It finds all networks around (status:Available),
2) It tries to connect to network, by asking me for (un)secured connection confirmation... (Status:connecting)
3) From 'connecting' status it becomes to 'Available' (instead of 'connected')*
4) After 2-3 retries of different networks(step2), all networks become 'Unavailable' and It cannot connect to any network anymore. and its not finds any new network until next soft reset.
* sometimes it establish connection and I can surf the net, very slow, but it hold it for less than one minute.
* Signal strength does not a parameter, battery is 100%, and network is set to Best Performance.
* I Have no problems to turn it on/off with the comm-manager.
* I'm not sure when Exactly it happened, but I Suspect that it happened around the time that I've upgrade to 1.54.00.10 radio, but since I've read that it does not affect on Wifi, I suppose it's not related.
Any suggestions ?
I use Schap's 4.30 should I Change to other ?
Thanks
I've found the cause, now searching for fix
I've changed to CRC 9.2 Rom..
(The schaps looks better to me...)
Same symptoms.
After few hours of trying, I've found the cause for this problem...
It happens when the wlan is set to 802.11g or 802.11b/g or 'mixed mode'
It can connect to 802.11b only, with no problems.
That means that I Cannot connect to most wlan I can find.
Please note that the schaps and crc roms already has the 802.11g tweak.
If there is a solution to connect to 802.11g or mixed, please let me know...
I'll search for solution, if I'll find one, I'll post it here.
Exactly the same problem!!!
Hi,
I use Schap's ROM 4.31 and Radio 1.38.00.10
I have at my homenetwork new Belkin N wireless router (working in b/g mode), every device connect without ANY problem, notebook, even another PDA (Asus), but TYTN does not. I tried every possible setting...
I will be REALLY VERY HAPPY if someone find solution...
Otherwise this is the main reason, why I will buy another PDA (Xperia)

Problem with HD2 (Tmobile)

My new T-mobile HD2 have some problem with wifi, It working normally with wifi in every where, but not in my home, in while my notebook is connect to wifi at home normally, when finding wifi, my phone found the neiborhood wifi as usual, and never saw my own wifi moderm, my old phone, HD1 was connect normaly, pls show me where is the problem and how to solver it. Tks in advance
if it isnt visible, try entering the SSID manually.
I've never heard of an issure like this!
I know it sounds strange, but try looking for it in a different area of the house ...
My HD2 will not see my wifi if I am too close to the router, yeah weird. But it also will not see it if I am standing too close to my tv ...
BUT, once connected neither of those things seem to make a difference ...

[Q] Wifi not working after upgrade to 2.1

I upgraded my X10i to 2.1 and my Wifi is not working. I have confirmed that it is not the router etc. since the wifi works on my PC and my Wife's X10 mini pro.
When I turn on the wifi on my X10 it scans fine and finds my wireless router no problem. When I connect (using my WPA password) everything looks fine and the wireless indicator appears in the statusbar. HOWEVER, when I try to connect to the internet via the browser/market/facebook it returns a message saying NO NETWORK FOUND (no internet connection via wifi) !!
I have already tried -
*reset to factory settings
*reinstall of 2.1 via SEUS
*re-connecting to wireless router with WPA password.
Nothing works!!
Can anybody help?
Is there any way to reset the wifi on my phone?
hi, i had this problem after the upgrade, i changed to the name of my router and then it was fine. try that.
UPDATE - I can get the wireless connection on my X10 to work when it is not encrypted (ie with WEP, WPA etc.)
Now I really don't know what is going on....
Anybody out there to give some advice? pleeeeeeeeaaaase
Thanks
nvm sorry I see that you did every thing.
is just weird had that prob when having nordic now i don't
try installing 1.6 and see if it's the fw or the phone
Sometimes try adding connection manually, then the wifi suddenly detects it from that point onwards..
After i upgraded the firmware to 2.1, my wifi just stops working. When i turn wifi function on, there is wifi logo appearing on the top of the screen and never detects any wifi access point. Anyone knows what is going on? Is that a bug of 2.1? as wifi was working fine with 1.6
themiraclebox said:
After i upgraded the firmware to 2.1, my wifi just stops working. When i turn wifi function on, there is wifi logo appearing on the top of the screen and never detects any wifi access point. Anyone knows what is going on? Is that a bug of 2.1? as wifi was working fine with 1.6
Click to expand...
Click to collapse
I think the 1st time it needs a little push. Try turning WiFi off, back out of settings, back in turn on, go to wi-fi settings and manually select. That worked for me. Had similar with bluetooth.
I have the same issue with 2.1 upgrade and Wifi + WPA2 router protection!!
Wep protection works fine! but for me is not ok it is a weak wifi protection I need WPA2!
please help
I read that wifi fixer may work however I cannot test it untill I reset my modem or switch to Wep....
can some one test wifi fixer? thanks.
references : talk.sonyericsson.com/message/35204
wififixer.wordpress.com

Categories

Resources