the question is ...... how to make the keyboard i want .... the defult keyboard alaways after softreset?
What about "sipchange".
It sets your most liked Input method as default.
Try the search function.
Greetings from Germany
skylow
sipchange
sipchange is what I use...
It's from a thread on here (can't remember where) so thanks to the original developer!
Default IM WM5
Isn't "default_im_wm5" also a tool to change the default input ? but not really sure....
Sounds like it from that... Also G4SipTweak, a newer tool. I haven't tried it.
Be carefull with sktools software and its tool to make default keyboard. I once tried to use iphone-similar keyboard (which you can be found around here..) and got it stuck in 3rd screenboot.
use programs like safemode 2.1 to mend future problems lika that one. I didn't had this and had to hardreset..
Great tool ...... SIPChange
Thanks alot all of u
Related
Hi
I am trying to change the layout of my virtual keyboard. Sadly, I was not clever enought to backup my rare original keyboard layout.
It would be great if some of you (having a german ROM or, better, the Swiss French keyboard layout) could upload me the msim.dll and the msim.96.dll located in \Windows\ directoy.
Thank you in advance; I realy do not want to flash to a german ROM just to get those files :s
Hi,
I need exactly the same thing. I hope a solution can be found by now...
Please, help!
how were you able to edit those files?i cant even copy them to my desktop pc.access is denied everytime i try...
Hi
Here are my msim.96.dll and msim.dll from my dumped german MDA Vario II Rom.
If you find out, how to change the virtuall keyboard,please share your knowledge how to do this.
keyboard changer
here's epocket's solution which is quite good and hopefully you can modificate it if needed.
http://www.epocket.no/tastatur/
HTChacker said:
here's epocket's solution which is quite good and hopefully you can modificate it if needed.
http://www.epocket.no/tastatur/
Click to expand...
Click to collapse
Hi, isn't this tool for Scandinavian' languages only?
I wonder if fun_key managed to restore the proper settings as I need the same...
hello masters of wimo, special greetings to ultramag.
i have new question, and i am sorry if i did not found topic about this issue, but i would like to know.
i was user of symbian, and for symbian i was able to pick what languages to flash to rom, but on htc i do not have that option.
wasnt checking wince files, but i assume all rom files should load language from external file.
and, allso, i saw one awsome 6.5 rom on spanish...too bad i dont understand that language.
oh, yes, i have croatian keyboard and z and y are exchanged with standard roms, is there any way to fix this ???
what to change in rom file??
i have required tools for cooking.
best regards
wook
oh, btw, i have hermes and wimo6.5 pro by josh (first one from hist thread) (test one).
allso, registr will not work... :S at least hkcu/keyboard layout/preload/1
tried at least german, nut it will not work....
regards
solved with RevRom7.
now german keyboard fits perfect hehehehe
only, i miss symbols in inputs.
but i have new issue.
i made new bootloader splash image, created nb, put it in nbh and flashed my phone, but after that,
about 20% of screen (bottom part where letters are) was white, and rest was ok.
is it because image was too large? or ???
best regards
Hi everybody,
Since I installed the Cyanogen Froyo rom, my physical keyboard switched in QWERTY. I'm french, so I prefer an Azerty one. So I used this to switch back in AZERTY.
That works fine ! For the screen keyboard, not for the physical one that stays in QWERTY.
Can somebody help me ? Thank you !
I'm guessing your solution can be solved by checking out this thread: http://forum.xda-developers.com/showthread.php?t=982341
Not 100% sure though
I tried this, but an error appears while installing (It says some like "The script is depreced since Android 1.5, Installation Aborted") :/
In the Mini Pro development forum, there is a ROM manager created by slade87 and D4.
In this ROM manager, there is a keyboard selection tool, which allows you to choose the one you prefer. It is also important to long klick the box where you want to write and choose the "standard input method" when you use the physical keyboard.
Mythril74 said:
Hi everybody,
Since I installed the Cyanogen Froyo rom, my physical keyboard switched in QWERTY. I'm french, so I prefer an Azerty one. So I used this to switch back in AZERTY.
That works fine ! For the screen keyboard, not for the physical one that stays in QWERTY.
Can somebody help me ? Thank you !
Click to expand...
Click to collapse
witch input do you use in physical keyboard? beacuse Azerty will work only in default input. or you can sherce in android keyboard for your language.
so the bes option is to use default keyboard
Download smart keyboard 15.
Ok I just changed the imput in default imput and everything's fine. Thank you !
Hello,
First of all I should Thanks "sternas" for his great rom. It works like a charm
my first problem is about Jblend. in my original rom when I use jblend for running a program, there is a bar in bottom of screen that can be use as left & right softkeys. but in Artemis rom when running a program, the bar is disappearing, so I cant use soft keys. actualy should say that in artemis rom, Jblend runs programs in full screen mod.
the second problem is about stopwach program. before installing the arabizer program (MOBIDiv Arabware)for reading arabic's SMS, it worked great. but after installing the mentioned program, stoped watch stoped working and every time I want to run it, it give me an error that there isn't enough memmory to run the program.
I'll be thankfull if anybody can help me about these problems.
Why don't you ask directly on Artemis thread?
Are you shy?
Thanks for your attention, but the problem is that my posts are under 10 so I can't post in that threat. so I asked it here. but nobody answered me.
actually I found the problem with the Jblend. It is beacause of a registery change that force program to run in full screen mode. (HKEY_CURRENT_USER\Software\JBlend\Full_Screen_Mode).
For the second problem I couldn't find any solution till now.
farafr said:
Hello,
First of all I should Thanks "sternas" for his great rom. It works like a charm
the second problem is about stopwach program. before installing the arabizer program (MOBIDiv Arabware)for reading arabic's SMS, it worked great. but after installing the mentioned program, stoped watch stoped working and every time I want to run it, it give me an error that there isn't enough memmory to run the program.
I'll be thankfull if anybody can help me about these problems.
Click to expand...
Click to collapse
Hi farafr,
@mistieger pointed me to your problem and asked me kindly to see if I could be of any help to you!!
as far as I can see this, the problem is the arabizer program. Although Artemis is a multilanguage ROM, it does not support Arabic, thus there might be an incompatibility between the arabizer and the stopwatch program. The only way to find this out is to deinstall arabizer, perform a soft reset and see if stopwatch is working again. If it works, it's up to you to decide what's more important for you: the arabizer program or the stopwatch.
Is it possible for you now to answer in Artemis thread? Otherwise use PM to answer.
regards, Kuzibri
Hi Kuzibri,
First of all thanks for yor attention, it's yor kindness to help a noob.
as u said I uninstalled the arabizer program. U were right. the program started to work again. but I want to know is there a way for me find out what's happen when I install the arabizer? for exaple a registery change tracker that help me to find what is affecting the stopwatch program. and also I wanted to mention that the arabizer also affect the "Tip calculator" program. (I found it yesterday).
Thank you again,
FarAfr
farafr said:
Hi Kuzibri,
First of all thanks for yor attention, it's yor kindness to help a noob.
as u said I uninstalled the arabizer program. U were right. the program started to work again. but I want to know is there a way for me find out what's happen when I install the arabizer? for exaple a registery change tracker that help me to find what is affecting the stopwatch program. and also I wanted to mention that the arabizer also affect the "Tip calculator" program. (I found it yesterday).
Thank you again,
FarAfr
Click to expand...
Click to collapse
Hi farafr,
you're very welcome my friend!! Regarding Arabizer and Stopwatch/Tip Calculator, I'm afraid there is no solution AFAIK for. Although Artemis is a multilanguage ROM, it does not support Arabic language, therefore there will be some incompatibilities between Arabizer and Artemis.
So, again: it's up to you to decide what's more important for you: the arabizer program or the stopwatch/tip calculator.
BTW, to be absolutely sure that there is no or a possible solution for your problem: send Sir Sternas himself a PM with your problems. Maybe he knows a solution (or not).
best regards, Kuzibri
Stopwatch and Tip Calculator
Hi farafr,
when my memory serves me well, these two programs are two of the latest applications developed by Sir Sternas himself for his new ROM. I cannot recall if they were already present in V65 (simply because I do not use them), but certainly in V66. Maybe the problems of these two apps with Arabizer is caused by this fact.
best regards, Kuzibri
I have MiniCM7-2.1.8 on my X10 mini pro, and now I am stuck finding the correct way to enable the QWERTZ keyboard layout for the Standard and Android input method including the special German characters.
slade87's thread gives some (although quite confusing) info, but the files for download are not working any more, because they are based on the old update-script-style not supported by CWM any more.
It should not be that hard to perform such an important localization, most solutions only manipulate the keyprint.xml, but that's not enough.
So can someone please explain how to get fully localized QWERTZ keyboards for the German language up and running?
Master One said:
I have MiniCM7-2.1.8 on my X10 mini pro, and now I am stuck finding the correct way to enable the QWERTZ keyboard layout for the Standard and Android input method including the special German characters.
slade87's thread gives some (although quite confusing) info, but the files for download are not working any more, because they are based on the old update-script-style not supported by CWM any more.
It should not be that hard to perform such an important localization, most solutions only manipulate the keyprint.xml, but that's not enough.
So can someone please explain how to get fully localized QWERTZ keyboards for the German language up and running?
Click to expand...
Click to collapse
Use the application mini rom manager ... Search in xda..
Sent from my U20i using xda premium
Ok, switched to QWERTZ using ROM Manager, but as I already knew, this only switched it for the Standard Input, but not the Android Input.
I have seen in slade87's thread, what has to be done, to switch the Android Input, but I don't know how, since the downloads in slade87's thread do not work any more with recent CWM, and I really do not want to fiddle around in the ROM manually.
Any suggestions, or do just have to forget about the Android Input?
I´m going to "fix" my dad´s phone tomorrow so stand by until then..
Thanks, that's good news! I am very interested in how this problem can be solved.
rooterdam said:
I´m going to "fix" my dad´s phone tomorrow so stand by until then..
Click to expand...
Click to collapse
rotterdam, you didn't replay any more, did you solve that issue?
Master One said:
rotterdam, you didn't replay any more, did you solve that issue?
Click to expand...
Click to collapse
Sorry for the NON reply..
I´ll try and get you a ZIP tomorrow sometime after work and some sleep.
remind me if you can please.
hi i have the same problem.
any news?
edit:
i found a fix!
use attached files and override old files using root explorer.
IMPORTANT: don´t forget to set correct permission for the files or your buttons will not work anymore.