Hi..all,
I have broblems with my ATOM Black, where is dial pad, close pad, up, down, next, last, center, windows, media pad all is not fungction and no respons.
Do anyone could to help me to solve it? Because, I can't doing hard reset or any think else with the pad.
I'm use ROM 3.3.3 from Mr. Jiggs
Thanks You.
Try flashing aku 3.3.2c
http://forum.xda-developers.com/showthread.php?t=314613&page=100
http://www.mediafire.com/?4vhfl2jdyvm
Related
If my atom exec hangs frequently is it normal? been expriencing it since with the wm5 till now when i flash wm6 in. it hangs like... display icons without any link just the window flag.. unable to respond to screen taps, and once in a blue moon unable to power on with the power button.
I have the same problem with my Atom exec. However, it only hangs / freeze for about 1 minutes after I softreset the device, almost everytime like this.... so strange
Mine was doing some when it was WM5 but then I ported over to WM6 by Jiggs The Great followed by Chartreux and finally Abusalza. Since move over to WM6 I have never found a problem of freezing until and unless some third party software that I load causes it. You can check if it is a software that is creating the problem for u.
superkc said:
I have the same problem with my Atom exec. However, it only hangs / freeze for about 1 minutes after I softreset the device, almost everytime like this.... so strange
Click to expand...
Click to collapse
Try to turn it on and off and see if that will break it from "fake dead".
There are only two WM6 AtomExec ROM could be used for the moment.
Chartruex's ROM is extremely fast but freeze a lot. Abusalza' ROM is slower but seems more stable but still has "fake deads".
I hope they are still working on it. They are close to a very good ROM.
Using WM6 my Athena would turn anytime the keyboard was snapped into place. With WM6.1 that feature no longer works - I have to press the "power on" switch.
Anyone know how to restore this feature? I tracked down HLM\control panel\mycpl\... but did not see anything about the keyboard power on issue.
Many thanks!
That would be annoying! Its a useful feature, I agree. Sorry I can't help...
nrm said:
Using WM6 my Athena would turn anytime the keyboard was snapped into place. With WM6.1 that feature no longer works - I have to press the "power on" switch.
Anyone know how to restore this feature? I tracked down HLM\control panel\mycpl\... but did not see anything about the keyboard power on issue.
Many thanks!
Click to expand...
Click to collapse
Make sure all the pins are making contact. Mine stopped doing it also and come to find out 1 of the pins (left one looking at it from correct key readout) wasn't making contact, due to the fact that I had dropped it. So double check it and let us know. Good luck!!!
it has nothing to do with that the problem is that wm6.1 was ported from another device so it has just about everything that wm6 for athen had but not all. example, device turns on when keyboard is attached. it should be fixed with pawel's new rom
irus said:
it has nothing to do with that the problem is that wm6.1 was ported from another device so it has just about everything that wm6 for athen had but not all. example, device turns on when keyboard is attached. it should be fixed with pawel's new rom
Click to expand...
Click to collapse
Thanks - I was reasonably sure it had to do with the upgrade to WM6.1 but I was hoping to fix the problem with a registery change.
No luck so far.
Ok, I don't think that I ever saw anyone discuss this problem that probably affects all prophets with WM6 and 6.1 roms.
With WM5 official roms, never tried cooked wm5 roms, when Prophet was connect to a PC by usb in Windows with Activesync or Windows Mobile Device Center (activesync in Vista), if I turn off on the Power button the device stayed always power off until I pressed the Power button again.
With all WM6 and 6.1 cooked roms, if I turn off the device, after a few seconds the device is again turn on without pressing the Power button.
Why this was never resolved is a mistery to me. If anyone could resolve this problem, would be great.
onesolo said:
Ok, I don't think that I ever saw anyone discuss this problem that probably affects all prophets with WM6 and 6.1 roms.
With WM5 official roms, never tried cooked wm5 roms, when Prophet was connect to a PC by usb in Windows with Activesync or Windows Mobile Device Center (activesync in Vista), if I turn off on the Power button the device stayed always power off until I pressed the Power button again.
With all WM6 and 6.1 cooked roms, if I turn off the device, after a few seconds the device is again turn on without pressing the Power button.
Why this was never resolved is a mistery to me. If anyone could resolve this problem, would be great.
Click to expand...
Click to collapse
Never experienced this. If I turn my device off when connected with ActiveSync, the connection gets terminated, and the device stays off.
l3v5y said:
Never experienced this. If I turn my device off when connected with ActiveSync, the connection gets terminated, and the device stays off.
Click to expand...
Click to collapse
Same here, I tested it on a few different PC's (only have one Prophet...) and nothing unexpected occurred.
onesolo said:
...With all WM6 and 6.1 cooked roms, if I turn off the device, after a few seconds the device is again turn on without pressing the Power button....
Click to expand...
Click to collapse
Mine works like onesolo, I press to Off and after maybe 2 to 3 minutes it goes on again. But I don´t know if it is a bug, it may be a wake up on activesync tranfer data function.
ActiveSync 4.5.0 Build 5096 PT Language
x0101222 said:
Mine works like onesolo, I press to Off and after maybe 2 to 3 minutes it goes on again. But I don´t know if it is a bug, it may be a wake up on activesync tranfer data function.
ActiveSync 4.5.0 Build 5096 PT Language
Click to expand...
Click to collapse
Maybe it's the Portuguese AS build...
Nope, because this affects activsync in english as well. And as I told before, it happens in WinXp and Vista...
Im portuguese and I have the same problem I dont think it is strange, cuz my old PDA Ipaq H3850 did the same so I didn't care about it^^
With the oficial WM5 rom I never had this problem.
Also with my grilfriend's HTC P3400 I don't have this problem.
onesolo said:
Ok, I don't think that I ever saw anyone discuss this problem that probably affects all prophets with WM6 and 6.1 roms.
With WM5 official roms, never tried cooked wm5 roms, when Prophet was connect to a PC by usb in Windows with Activesync or Windows Mobile Device Center (activesync in Vista), if I turn off on the Power button the device stayed always power off until I pressed the Power button again.
With all WM6 and 6.1 cooked roms, if I turn off the device, after a few seconds the device is again turn on without pressing the Power button.
Why this was never resolved is a mistery to me. If anyone could resolve this problem, would be great.
Click to expand...
Click to collapse
May be about auto synchronize setting in AS.When u cradle your device with PC .The device will power on to auto synchronize with your PC .
onesolo said:
Ok, I don't think that I ever saw anyone discuss this problem that probably affects all prophets with WM6 and 6.1 roms.
With WM5 official roms, never tried cooked wm5 roms, when Prophet was connect to a PC by usb in Windows with Activesync or Windows Mobile Device Center (activesync in Vista), if I turn off on the Power button the device stayed always power off until I pressed the Power button again.
With all WM6 and 6.1 cooked roms, if I turn off the device, after a few seconds the device is again turn on without pressing the Power button.
Why this was never resolved is a mistery to me. If anyone could resolve this problem, would be great.
Click to expand...
Click to collapse
1. it is not a problem.
2. the Prophet needs to communicate with the PC once cradled or USB connection.
3. wanna stop from power on automatically in your case? Just uncheck the usb connection option from PC or from the Prophet.....
thats is the fact of your case. ^^
Good Luck
Funny, this used to sometime happen WITHOUT being plugged in. Not anymore...
jincongz said:
Funny, this used to sometime happen WITHOUT being plugged in. Not anymore...
Click to expand...
Click to collapse
1. OK, that, 90% is caused by software installed from the 3rd parties.
2. if too disturbing for that circumstance, hardreset should solve that "problem".
3. the above is based on solid experience.
Cheers~
wanna spend 6 minutes to flash Korand's fast, stable and clean WM 6.1 rom? try this 2 in 1 tool (with ROM) ^^
ENJOY ~~~
Hi,
I have XDA Neo G4, i did HardSPL and i am using WM 6.1.
I have problems that my screen is dead after some time, I press power button and nothing reacts, also when somebody calls me it rings and i can answer the call but screen is dead doesnt display nothing.
After 1-2 hours then screen works again without reseting phone or something !!!
I have try Hard Reset, change 2-3 different roms but still same problem.
Please help me if somebody knows is it any issue of WM 6.1 rooms or it is hardware problem in my Prophet ?
Thank you in advance.
Hi
Please, I need your help, I have a serious problem with my htc tytn 1 :
Herm200
Radio: 1.47.00.10
the problem is that my phone's keypad fate alone, and sometimes make calls alone!
what should I do?! I have to flash ! but by what flash!
Go to start>settings>system>Key lock>Lock all buttons but power button.
This should stop it activating if the buttons other than the power button on the side are pressed...
Cheers...
Hi ultramag69
but my HTC done it alone, I do not touch it! and not even in my pocket! when the phone keypad sort, sometimes gives me a message with "3g not available, click on ok if you want to leave a voice message"!
and call the last number in my call history!
and sometimes the two buttons for call "Green & Red", not works!
is a possible problem with the ROM!
but I installed the official ROM HTC TYTN and I still have that problem!
and I had not this problem before. just lately!
that's going on with my HTC not!
No one can help me! pls
What should I do!
I have no hope now
have you thought that maybe its the circuitboard thats at fault and not the rom? maybe the call button is broken and that is what is making it dial your last number?
If you press the call button the dial pad appears , which is probably why the 3g signal message appears because the video call button was pressed, also why the last number is being dialled which is what happens when you press call twice. If you constantly delete your call history, it wont be able to call. But i know that isnt really a soloution to the problem.
The simplest way of finding out if it is the call button that is causing the problem is to lock the keys as ultramag69 has said, then the software part of your phone cannot activate the buttons. If the problem persists then you have a fault with the motherboard connections.
Thats my view on it anyway, i had a similar problem years ago with a wallaby and the call switch on the motherboard was the problem
I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.
I always have same problem of keyboard of Call !
yes it is possible that I have problem with motherboard! or I did a bad flash!
Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!
thx
I think it sounds like more of a hardware problem...
After flashing with a few different ROMs, the problem should have fixed itself by now if it was software.
You may need to open Her up and poke around, use the "HTC service manual hermes" to do a search to find on the wiki for good instructions to open.
I have also this problem
i think it's abaut with hard spl end spl
how i can find the spl
i have already hard spl
but the pocket, clos end open alone the programs
for i 4 or 7 min
end plis need help
i think i'ts problem in the spl end, Rom somethink do not go together
need help ........
that is what I thought too
possible problems with hard spl!
but I repeat the flash a lot of time and I now see that it works yet.
sorry to be open about twice
http://forum.xda-developers.com/showthread.php?p=3370514#post3370514