Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
HDJ80 said:
Pleasant interface.
ActiveSync 4 works through USB.
I cannot accede to Storage and ExtendedROM.
All buttons correctly work including camera and record.
Backpack dont works (Some change in the registry to fix that?)
ExtendedROMunlocker dont work.
Resco file explorer works.
Cabinstl works.
I can install programs from PC to PPC through USB (ActiveSync), in PPC (not in PC) screen ask about install in "Device" or "Storage Card".
Internet Explorer works trough USB (ActiveSync)
I cannot make hard reset but I can put it in bootloader mode.
I only have been one hour proving it.
At the moment he is everything.
Click to expand...
Click to collapse
Tell us something about the speed of the system and the space it takes...
Regards,
Primoz
p.s. Hope it will be soon released a version for the magician :wink:
Some screen captures
I have few installed programs but I think that the speed is very similar.
I do not understand very well as Magneto uses the memory, you have 14,57MB of ROM (storage) to install programs but you cannot install them in the RAM.
You can see 24,35MB of RAM but I believe that Magneto uses all the RAM, only who deal with form different those 24.35 from the 100 rest that we cannot see.
Resco file explorer cannot accede to Windows or temp but microsoft file explorer if it can.
Parrot CK3000 works fine.
About backpack: battery and TV/monitor output works but CF slot dont works.
Is it still using the MS bluetooth stack ? Any improvement on bluetooth function ?
Yes, it is MS BT, but now it appears a new menu, "COM Ports"
IMPORTANT: I have upgrade to Magneto using himaupgradeut_197.exe and the original nk.nbf file (without patching)
It has worked to the first time and I have not had any error of identification.
Also I have left the Storage empty before beginning the update.
what does the "patch" do anyway?
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
OMEGA_ReD said:
where did you get this version can you upload your version? or share it?
I heard that it i impossible to downgrade to 2003se is that true?
what do you advice: try it or not try it until its officially released(It is beta right?)
thx
Click to expand...
Click to collapse
should try, you can downgrade 2k3SE later if you don't like 2k5
witch version shuld i take?
and shuld i patch it or something like that to be able to downgrade it later?
thx m8!
ishtangli said:
what does the "patch" do anyway?
Click to expand...
Click to collapse
It changes the filename of file "DevAuth.exe" in a way that it can't be executed anymore before start.
This application checks the hardware in some way to determine if the device is allowed to use the software. Maybe some of you have a device that matches this "authentication".
What about BT voice call?
Hi
"Parrot CK3000 works fine."
Does it mean that you can originate a call from BT device? Voice dial or smth. like this?
Or it just receiving calls and you can hear and microphone is working?
Making of voce calling over BT is one reason for me to upgrade...
can you give met the link for witch i can download it?
I have used the file nk.nbf from Xda-developers ftp.
I have returned to wm2003SE with himaupgradeut_197.exe and nk.nbf file of version 2.06.
ParrotCK3000 works just as with 2,06 version and the change of the registry.
Magneto is very interesting but it specially has a great failure, when you install many programs the system becomes slower, particularly with programs like betaplayer.
If the problem of the RAM use and the access to CF slot were solved, it would be a great system.
2.06 works with AS 4.
More news:
Magneto can be reinstall again using himaupgradeut_197.exe in bootloader mode.
If we installed the programs in the SD and left frees the memory of the PDA, the system goes much more fast.
Some programs cannot be installed in the SD and they settle in the PDA. Some programs that work in wm2003 and wm2003se not admit magneto, aborts the installation.
SPB pocket plus does not settle because it says that it is being tried to install on ppc2000 and aborts the process.
I have upgraded my spv m1000 into 2.06.00WWE rom wm2003de
Everything is runnig great,very stable exept the bluetooth stack.
While it bonds perfect with my gps receiver,i cant send or rceive files from other bt devices (cell phones)What could be the problem...it always produce an error.Can i upgrade to widcomm bt stack?where do i find it?
Thank you
babisgr said:
I have upgraded my spv m1000 into 2.06.00WWE rom wm2003de
Everything is runnig great,very stable exept the bluetooth stack.
While it bonds perfect with my gps receiver,i cant send or rceive files from other bt devices (cell phones)What could be the problem...it always produce an error.Can i upgrade to widcomm bt stack?where do i find it?
Thank you
Click to expand...
Click to collapse
What is the error you have?
Do you succeed to pair the devices?
Do you use OBEX to transfer files?
it gives me an error tha says
"Cannot connect to the OBEX device.It is either not accessible or does not support selected service" when i try to send something from my ppc and when i try to send something to it windows just give an error tha cannot send
Can anyone tell me which version of WM2003SE has the bluetooth working?
My brothers himalaya was upgraded to 2.02t rom and now has the ear speaker working along with the bluetooth headset. Any advice will be greatly appreciated.
babisgr said:
it gives me an error tha says
"Cannot connect to the OBEX device.It is either not accessible or does not support selected service" when i try to send something from my ppc and when i try to send something to it windows just give an error tha cannot send
Click to expand...
Click to collapse
You have to check if the OBEX service is running. If not you have to start it.
Just use this tool
http://forum.xda-developers.com/showthread.php?t=280104&highlight=Free+Task+Manager
Go on the service tab, look for the OBEX service and checks if the service is running, if not start it and try.
Cheers,
.Fred
ok,i can see tha OBEX service is Stopped as well as BTAGSSVC(BAG0).I cant start it,it says "the device is in use by an active process and cannot be disconnected"
babisgr said:
ok,i can see tha OBEX service is Stopped as well as BTAGSSVC(BAG0).I cant start it,it says "the device is in use by an active process and cannot be disconnected"
Click to expand...
Click to collapse
Ok, get the name of the dll of the OBEX service then go to the processes tab,
select services.exe process, show the context menu, and select details.
In modules, checks if the dll is in the list?
ok
in services.exe i can see the obexsrvr.dll
maybe there is a problem with the file.Can someone post the dll to replace and see?
hello pal i am using new gene with sumits vanilla manilla
rom
my phone it automatically is on loud speaker when i call or recieve
when i am connecting my head phone it is not responding
i am not able to connect to active sync or to usb mode
coz i wanted to flash my gene with new rom
my headphone works when i try to restart my phone by connecting the headphone at the time of restart
i know that it is not hardware problem plz help me man plzzzzzzzzzzz
went to boot loader and no usb word coming there
update---------------------------------------------------------------------------------------------------------
my loudspeaker problem got solved for Rs 500 and i am still not able to connect to active sync . i am using new gene with original gene rom,i flashed my phone with memory card can anyone help me in connecting to activesync
keshavmalu1 said:
hello pal i am using new gene with sumits vanilla manilla
rom
my phone it automatically is on loud speaker when i call or recieve
when i am connecting my head phone it is not responding
i am not able to connect to active sync or to usb mode
coz i wanted to flash my gene with new rom
my headphone works when i try to restart my phone by connecting the headphone at the time of restart
i know that it is not hardware problem plz help me man plzzzzzzzzzzz
went to boot loader and no usb word coming there
Click to expand...
Click to collapse
i have had same problem with sumit and other manilla rom but it solved by itself.do hard reset....or try another rom.or if u still want to stick to that try to change pagepool.also plz use few third party applz......
i observed in last 2 weeks these types of problems are happening with wm6.1,ill recommend wm6.5 for all guys who dont want face these annoying errors...
deathgame said:
i observed in last 2 weeks these types of problems are happening with wm6.1,ill recommend wm6.5 for all guys who dont want face these annoying errors...
Click to expand...
Click to collapse
hey hows your work of genero?can u tell me how can i intergrate opera and remove PIE/ means what i have to remove from packages to completely remove PIE/
saurabh88 said:
hey hows your work of genero?can u tell me how can i intergrate opera and remove PIE/ means what i have to remove from packages to completely remove PIE/
Click to expand...
Click to collapse
for removing PIE5-(WM6.1)-
BROWSING
Browsing_DPI_96
Browsing_Lang_0409
BROWSINGCORE
for removing PIE6-(WM6.5)-
BROWSING
Browsing_DPI_96
Browsing_Lang_0409
BROWSINGCORE
browsingie
browsingie_LANG_0409
----------------------------------
i think we cant remove PIE from ROM because it supports some other applications(not confirmed ask for sumit).
I am waiting for correct version of WM6.5 to continue my work on GENERO..and iam quite confirm that next versions of 23049 will be nice!
Yes the First 4 browsing* folders support SMS and EMail functionality so it will break if you remove those 4 packages. Browsingie and Browsingie_lang_0409 can be removed though. In WM 6.1 this would cause Internet Explorer 6 to behave like 5.5. It wont render HTML pages good, it will work only for WAP sites. In WM 6.5, it would also cause the Widgets platform to stop working since it depends on the MSHTML.dll and other files inside it.
Ya, i too have a bit good expectations from 230xx series, the next build should be good, however that would only happen if they didn't made any changes to the feature list. Introducing new features causes more bugs. And looking at the COM4 tree (234xx), i think the new Contacts application that appeared in 23412 build may also come in any of the next build of 230xx Lets see!
download original rom from http://rapidshare.com/files/150494470/RUU_Signed.nbh.html (new gene)
http://www.mediafire.com/download.php?n1ydj4mzlyg (old gene )
1. Format your SD card to FAT32.
2. Just rename downloaded the file as GENEIMG.nbh and copy into your SD card.
3. Hold the camera button then press the soft reset button while holding the camera button.
4. Press the down volume when it asks you to press something.
READ THIS FIRST​
Finally Working Bluetooth problem
For ATOM/ATOM PURE ONLY
Download link moved to post #2
Step by step upgrading
NOTE: These steps only apply if you have an ATOM/ATOM Pure.
Basically, there are three steps to flash a custom ROM to your ATOM.
1. Choose and download your choice of custom ROMs
2. Flash the custom ROM to your Atom using the Device Software Update Utility (DSSU)
3. Flash the custom ROM using MiniSD
Preparation
Backup your personal information using a program such as PIM Backup (freeware). Also make sure your phone has at least a 50% charge. You need M$ ActiveSync 4.5 for XP or Windows Mobile Device Center for VISTA and 7 to upgrade your device through PC.
Please read through this guide and download the all the necessary files beforehand. That way, you know exactly what you're getting into.
Choose and download your custom ROM
There are many, many custom ROMs out there for the Atom.
Look through the threads and find a ROM that you like. Custom ROMs differ in their preinstalled software, system settings, performance tweaks, and more.
ROMs usually come compressed in a .zip file. Extract the downloaded ROM file to somewhere on your hard drive temporarily in preparation for the next step.
Flash Custom ROM Using DSSU
Copy the custom ROM file (usually came with 6 files) to C:\WINDOWS\Temp folder you just extracted.
Once you've got everything hooked up correctly, run the Device Software Update Utility (DSSU).exe program inside of the C:\WINDOWS\Temp folder you just copied. Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
In case you can't update the ATOM in active mode, you may need to update by entering bootloader mode. Hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. Then connect your phone via USB cable to your computer.
Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
Flash Custom ROM Using MiniSD
*Not recommended
Here's the step how to flash your Atom using MiniSD.
1. Extract downloaded custom ROM to somewhere on your harddrive.
2. Cut first 12byte header of diskimage_Ver.nb0 using hex editor.
3. Rename diskimage_Ver.nb0 to diskimg.nb0
4. Rename ExtendedROM.img to extended.img
4. Copy both files diskimg.nb0 and extended.img to your miniSD
Now, hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. The Atom will flash the new ROM automaically. Once it done, setup the device and enjoy the new custom ROM.
Big thanks to HelloWorld, [email protected], Tj's and all atom tester...
WM6.5
Build 28205
Mediafire Clean-New UI 04/23/2010
Build 21895
Mediafire Clean 04/15/2010
Mediafire Neo Shadow 04/15/2010
Build 23016
Mediafire Clean 02/15/2010
Mediafire Neo Shadow (Bluetooth not Working) 02/12/2010
WM6.1 latest WM6.1 Core OS
Build 21056
Mediafire Clean 03/08/2010
4Shared Mirror, thanks to Vincentshjuan
Build 21054
Mediafire Clean 02/19/2010
Upgrade instruction:
Download and execute downloaded file, if something goes wrong, extract it and copy all files to C:\Windows\temp.
If you already running wm61 or wm65 go for OS+ExtendedROM, for wm5 user go for ALL option.
Not expected for DONATION, but always appreciated it.
Thanks Glossy.....wow first one in line..........
Downloading now and will flash it later.....will update you from the try outs.
Good work though!
I'm wondering and really hope if this is very CLEAN, FAST & STABLE WM6.5 ROM in LOW BATTERY CONSUMPTIONS for O2 XDA Atom. Thanks before GlossyX1, you're the Atom ROM masterpiece too!
Wow! Great!
Thank you for this new build. Will try soon...
Have a try and gimme some report...
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
vincentshjuan said:
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
Click to expand...
Click to collapse
What do you mean by unlock the EXTENDEDRom? I use this ROM for several days and found no problem on my device. Now I uninstalled PersianBluetooth to save more memory.
Did you found another issue? Has anyone else try this ROM?
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
cwiggler said:
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
Click to expand...
Click to collapse
Waiting for your feed. I'm not tested yed to install SPB mobile, but there's no issue when I install another cab application. You have to try it by your self and give us a report. ATOM is QVGA device. thanks
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Add application
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
I mean WM6.5(this ROM)....
vincentshjuan said:
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Click to expand...
Click to collapse
I see, you can't unlock the EXTRom as it is configured automatically in a file named config.txt. So, every chef has configured it depend on what it is configured in config.txt to EXTRom. Another thing, don't ever use other EXTrom but what is it included on ROM package, it wont work.
For the Ring mode, I can set it as usual in ring mode. Just go to setting->sound and notification->incoming call. Not working??? Try this, set to ring and vibrate, restart and set to ring.
Bluetooth??? Need some magic
I just tried to install SPB 3.5 and it works as well
vincentshjuan said:
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
Click to expand...
Click to collapse
No you cant, while run standalone application (.exe) you wont see any shorcut because it not registered to registry and doesn't have any shortcut (lnk). You can try to build CAB file and set all shortcut in (initflash.txt) for eq to put TorchLight.exe then write it down Directory("\Windows\Start Menu\Programs\"):-File("Torch.lnk","\Windows\TorchLight.lnk"), it will show Torch on Start Menu->Programs
Try this to make a CAB file http://forum.xda-developers.com/showthread.php?t=400221
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
So bluetooth handfree is not working again
vincentshjuan said:
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
Click to expand...
Click to collapse
Thanks, glad to hear you'd loved the ROM.
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
cwiggler said:
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
Click to expand...
Click to collapse
It usual happen while atom run out of memory. My ROM preinstalled with PersianBluetooth, when you try to install custom home screen eq SPB then your screen goes white. Here is a tip for you: Try to remove PersianBlue and see what happen. I'm not recommended to use any custom Home Today screen because WM6.5 use more resource than you can expected.
dragon man said:
So bluetooth handfree is not working again
Click to expand...
Click to collapse
I don't have any bluetooth device, test it by your self and give me feedback.
Cheers...
Dragon,
Bluetooth handsfree is fine, working. Only issue is choose your bluetooth devie wisely as you can only add 2 bluetooth device only at the moment. So for me, luckily 2 is just enough, one for activesync and one for handfree(bluetooth). The reason is after you added the 2nd bluetooth device, you can't see add new device tap anymore.
Good luck....