This program help me to optimize my RAM while using WM6. Before my RAM is 16mb Free. Now, it became 23mb free after optimizing and free up RAM. Try this program.
Concurred.. I am using it..
Link please?
http://s-k-tools.com/index.html?sktools/m_feat.html
Attached files :
this is version 3.0 ...better to download the latest version..i will try to upload it..check my upcoming post
(Attached Keygen deleted_not allowed here) we need to follow XDA Forum RULES!
generalriden altough you're a senior member.
XDA-DEVELOPERS do not support warez of anykind
please delete serial.txt
by uploading warez here. you're destroying xda-developers community.
just my 2cents
pdafre4k said:
generalriden altough you're a senior member.
XDA-DEVELOPERS do not support warez of anykind
please delete serial.txt
by uploading warez here. you're destroying xda-developers community.
just my 2cents
Click to expand...
Click to collapse
Well said, File removed.
if this happens again a 1 week ban is in order
Thanks Midget_1990, to take care.
Midget_1990 said:
Well said, File removed.
if this happens again a 1 week ban is in order
Click to expand...
Click to collapse
sorry i dont know
here you go the free one which does the same thing.
ironeagle said:
here you go the free one which does the same thing.
Click to expand...
Click to collapse
Guys do try this!! This is very useful and i had been using it for very long. U can install it in ur storage card and never need to install it again if u reflash ROM cos u can just link shortcut to it and use it
It actually help to free locked up RAM, but it does not increase available RAM tho.
As wat i had explained to generalriden before he posted this, The sktool helps to increase RAM by reducing the caches used by the device when it 1st booted. But however, cache suppose to increase speed to access some often used file or appz, so its a take-and-give thing between SPEED VS RAM. Do try to use the optimize function and chose FOR MEMORY and reboot to see the different
Cheer!!
kaidi
Note that SKTools is somewhat fully functional even without a key. You won't be able to use the registry browser and manual cleaner correctly, but hey, everything else works. <_<
Ultimate Chicken said:
Note that SKTools is somewhat fully functional even without a key. You won't be able to use the registry browser and manual cleaner correctly, but hey, everything else works. <_<
Click to expand...
Click to collapse
good info bro
Guys, if u were to use SKtool to reduce the cache to increase RAM, do keep the File system cache(2048) for better response from your atom.
Hope this help
Cheer!!
kaidi
well, thanks for the appz, currently using oxios memory,.
WARNING:
please use this latest SK tools..dont use anymore the old version attached in my 1st page..because of the old one using advanced feature u may corrupt ur system and ur atom maybe hang and need hard reset.( i tried to have a default keyboard and after soft reset, it hanged in O2 screen )
but other features are working fine.
just download it , hope someone can attach here. i have a problem attaching files now.
generalriden said:
WARNING:
please use this latest SK tools..dont use anymore the old version attached in my 1st page..because of the old one using advanced feature u may corrupt ur system and ur atom maybe hang and need hard reset.( i tried to have a default keyboard and after soft reset, it hanged in O2 screen )
but other features are working fine.
just download it , hope someone can attach here. i have a problem attaching files now.
Click to expand...
Click to collapse
you may share the link here bro,.
I think the latest version is SK Tools 3.1.10 released on 14 September 2007,.
here is the link for further information,.
http://s-k-tools.com/index.html?m_news2.html#sktools20070914
Garmin said:
I think the latest version is SK Tools 3.1.10 released on 14 September 2007,.
here is the link for further information,.
http://s-k-tools.com/index.html?m_news2.html#sktools20070914
Click to expand...
Click to collapse
thats it...then use oxios also..this 2 program will help u to have a good free RAM.
nice thread
Related
hi guys i m using jiggs rom i have one problem in this rom is when i running one application and doing multitasking and open other application but i find that previous application is automatically closed can u tell my senior what the problem and help me
sanjay2007 said:
hi guys i m using jiggs rom i have one problem in this rom is when i running one application and doing multitasking and open other application but i find that previous application is automatically closed can u tell my senior what the problem and help me
Click to expand...
Click to collapse
low memory, free up some mems.
I Have Memory Free Up To 26mb Help Me
HI brian_2cool4u MY SENIOR BUT HAVE SAID ME TO FREE UP MEMORY BUT I STILL HAVE 26MB FREE BUT PROBLEM IS THEIR MY MEMORY FREE UP TO 26.5 MB BUT I OPEN 2nd APPLIACTION 1st IS AUTOMATICALLY CLOSED ON THAT TIME THEIR HAVE LOT OF MEMORY FREE PLS HELP ME BRIAN_2COOL4U
sanjay2007 said:
HI brian_2cool4u MY SENIOR BUT HAVE SAID ME TO FREE UP MEMORY BUT I STILL HAVE 26MB FREE BUT PROBLEM IS THEIR MY MEMORY FREE UP TO 26.5 MB BUT I OPEN 2nd APPLIACTION 1st IS AUTOMATICALLY CLOSED ON THAT TIME THEIR HAVE LOT OF MEMORY FREE PLS HELP ME BRIAN_2COOL4U
Click to expand...
Click to collapse
Did you check in running programs/task mngr that 1st program was really closed? I doubt if it was running in background. Or you have task manager that closes the 1st application. kindly check your device. if found ok, do a hard reset, if not reflash the ROM.
hello friends this is the application which improves your touch experience
----------------------------------------------------------------------
http://forum.xda-developers.com/showthread.php?t=469865
----------------------------------------------------------------------
------------------
new gene
using
sumit's VanillaManilla ROM
Don't use it, in my opinion. I tried it on my device, had to Hard Reset LOL.
have u tried it
hi
i have downloded it thanks
have u tried it can u pls give a feedback
keshavmalu1 said:
hello friends this is the application which improves your touch experience
----------------------------------------------------------------------
http://forum.xda-developers.com/showthread.php?t=469865
----------------------------------------------------------------------
------------------
new gene
using
sumit's VanillaManilla ROM
Click to expand...
Click to collapse
it will stop the touch from your screen and you will hard reset to go back
DO NOT USE IT
zinzar said:
it will stop the touch from your screen and you will hard reset to go back
DO NOT USE IT
Click to expand...
Click to collapse
+1 for that LOL. I installed it once without backing up my data. And ...
Thanks a million guys
hi
thanks god im saved i was just about to use the same but just thought to see if their was any reply here thanks for ur kind advise i will not use the same thanks again guys most obliged
Addicted2xda said:
+1 for that LOL. I installed it once without backing up my data. And ...
Click to expand...
Click to collapse
see this
http://pdaphonehome.com/forums/ppc-6700-xv6700/83679-touch-screen-sensitivity-accuracy.html
keshavmalu1 said:
hello friends this is the application which improves your touch experience
----------------------------------------------------------------------
http://forum.xda-developers.com/showthread.php?t=469865
----------------------------------------------------------------------
------------------
new gene
using
sumit's VanillaManilla ROM
Click to expand...
Click to collapse
friends there is another version of this in this the value set is ffff and if this is not working then no need to hardreset what you need to do is using your hardware key try to remove this program and then make a soft reset your phone will be all right ................
the link provided by me contains all the information about the program so read all the post's and then install............
enjoy
give us ur feedback
dear
as u have provided this im sure u would have use the same so
come back to us and say if u have used the same and if it is working fine on ur phone
wating for ur feedback
keshavmalu1 said:
friends there is another version of this in this the value set is ffff and if this is not working then no need to hardreset what you need to do is using your hardware key try to remove this program and then make a soft reset your phone will be all right ................
the link provided by me contains all the information about the program so read all the post's and then install............
enjoy
Click to expand...
Click to collapse
lets not browbeat [email protected]
hi stupidgye
lets not browbeat him ok he is just trying to share some apps
and going by ur words it looks like ur taking about ur touch sensitivity and not ur phones
every one here is not a techi like u their are people like me who have no tech skils but would like to share some apps they have found in this forum so lets excuse them and only give them the right info & encourage them ok
this is my humble request to u thats all
stupidgye said:
my touch sensitivity is already excellent
i can feel air
i can feel emotions
i can feel water
i can feel the taste
and there many more things that i can feel
Click to expand...
Click to collapse
Yes..., It increasing touch sensitivity to emotion.... LOL.... Much people angry because they do hard reset to remove it..,very sensitive ..
BesFen said:
Yes..., It increasing touch sensitivity to emotion.... LOL.... Much people angry because they do hard reset to remove it..,very sensitive ..
Click to expand...
Click to collapse
Ask Me!
but setting the value of DWORD "PressureThreshold" at HKEY_LOCAL_MACHINE\Drivers\TouchPanel to 0x00013BE2 does improves touch sensitivity for me.
BTW Addicted, you dont seem to change your signature often now And ya, i will confirm the transfer after 12 PM.
touchresponse_azharsunny_enchanced sensitivity.cab
i installed this cab it certainly increase your touch sensitivity
-----------------------------------------------------------------------------
his is not going to give u a huge change!!! rather its going to make touch easier!!
the difference is small that an average person cant feel it, say if u were applying 1N force/sq. in now u only have to apply 0.5 N force/sq in!!
the first value is small to begin with hence the change is in your eys unnoticable !!!
i hope this explain evrything!!
this is posted in the forum
------------------------------------------------------------------------------
and i am using above cab
donot install iTouch_azharsunny.cab file
if by mistake you install this after your phone is reset you will loose your touch
so inorder to get back using your hardware keys go to settings>remove program......and then uninstall the program and softreset your phone this will work
i tried it on my phone it is working..................................
enjoy pal's
krazy_about_technology said:
but setting the value of DWORD "PressureThreshold" at HKEY_LOCAL_MACHINE\Drivers\TouchPanel to 0x00013BE2 does improves touch sensitivity for me.
BTW Addicted, you dont seem to change your signature often now And ya, i will confirm the transfer after 12 PM.
Click to expand...
Click to collapse
Signature updated
same herei used this app long b4...my touch was not working.my ppc became dead slow.....but when i alligned my screen.it started working...but my mobile was kinda slow..
[ROM] GINGERBREAD & FROYO "Remi-X10 mini pro" XL & XS, (New corners style)/ [deleted]
The Rom is no longer available.
Due to continuous requests for support and / or update requests to share some graphics depending on the needs that come to me that I can not fulfill for lack of time I feel obliged to delete that forum from Rom.
It does not seem right to leave here with the rom of my continuous questions intervention I can not answer because of personal commitments to which the Rom
been deleted.
This also does not seem to me a little courtesy to those questions that could not be answered.
I thank the entire community of xda.
English please......
BTW:
i think the rules says only english is allowed.. you should look the forum rules...
Touch Screen not working!
solution please...
vincenttan89 said:
Touch Screen not working!
solution please...
Click to expand...
Click to collapse
go to xrecovery and restore your backup...
btw, can someone please upload the file to multiupload i dont like rapidshare links...(im in a public wireless area :S )
i want to grab the launcher APK :b
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
royalbloodvi said:
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
Click to expand...
Click to collapse
i dunno... ive just downloaded it now... i will try and them i post my feedback here :b
it is not working.... briked my device...
Dont flash it will brick your device
PTGamer said:
Dont flash it will brick your device
Click to expand...
Click to collapse
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Can someone make a SE style (XPERIA Arc) with latest CM7 by Slade?
It will be awesome...
Thanks
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
Regarding the problem of the touch screen the only THOUGHT that I got for now is to first to load the rom to change system / lib / modules
1) File "x8gesture" update it to version 6
2) Delete file "cy8ctma300_ser"
While in etc, change the file "hw_config" and put the one you use normally.
Now zipped and run the installation steps.
I do not know if it works, and only a test.
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
flashed the fw... got stuck on se logo... xrecovery not working... now ive got to go home and restore with seus..
you should try b4 post...
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
you don't have to flash the fix i already included it
I can not understand where the problem is.
I do not know whether or not charged as it was pointed out a problem with touch screen.
owain94 said:
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
Click to expand...
Click to collapse
Owain94 Thank you for your assistance.
antonio89drop said:
Owain94 Thank you for your assistance.
Click to expand...
Click to collapse
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
owain94 said:
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
Click to expand...
Click to collapse
tested and is working now we just need to find if is there some bugs.
btw keyboard light al always on. i will tessting further
EDIT: bug cant see letters in timescape and cant login
working:camera and video, multitouch, market (but looks like i need to wipe dalvik beacuse i cant download), walkman, browser, wifi this is for now
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
slade87 said:
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
thank you sir
hmmm.... downloading now...
i will tell if find bugs to fix....
thx owain for ur assistan, btw I think u should update main page with the newer version, no all people read all replys...
i read that this app is very good becouse clean system very well,re-odex file and
move user app to system,it update system up too.
http://forum.xda-developers.com/showthread.php?t=1359611
some guy with our device use it in old release
download now this up but after installation and a
fter first one now it stuk at black
screen and frezz my system...i have to remove battery to work with my phone!!!!
someone uses it and tell me if is it just my problem? ....thanks a lot
edit:now it work finei think that last supuruser have a bug and sometimes i have to
reinstall its
Alternatives
angel.sea said:
i read that this app is very good becouse clean system very well,re-odex file and
move user app to system,it update system up too...so some guy with our devise use it in old release
i download now this up but after installation and after first one now it stuk at black
screen and frezz my system...i have to remove battery to work with my phone!!!!
someone uses it and tell me if is it just my problem? ....thanks a lot
Click to expand...
Click to collapse
Dude if youve unbricked your phone now or whatever i would just like to say theres loads of better alternatives if you want to clean up your system
Try SD MAID :good:
or :silly:
CLEAN MASTER :good:
both on google play and free :fingers-crossed:
Xx James xX said:
Dude if youve unbricked your phone now or whatever i would just like to say theres loads of better alternatives if you want to clean up your system
Try SD MAID :good:
or :silly:
CLEAN MASTER :good:
both on google play and free :fingers-crossed:
Click to expand...
Click to collapse
thx man i use clean master but i'm attract by the other functions of this tool
and would like know if this is only my problem because i use stok with rafael kernel
and sometimes with custom can happen
angel.sea said:
i read that this app is very good becouse clean system very well,re-odex file and
move user app to system,it update system up too...so some guy with our devise use it in old release
i download now this up but after installation and after first one now it stuk at black
screen and frezz my system...i have to remove battery to work with my phone!!!!
someone uses it and tell me if is it just my problem? ....thanks a lot
Click to expand...
Click to collapse
Dude
Tell me you didn't look up for a sticky called
POST YOUR QUESTIONS HERE
Please guys post in relevant thread and stop flooding General Section
I request you
Please
Don't make new threads for these topics
You may make new threads if you want to discuss about any developing thing in which you are having a problem.
Or a question peculiar in topic(not general) which was not answered before.
iamareebjamal said:
Dude
Tell me you didn't look up for a sticky called
POST YOUR QUESTIONS HERE
Please guys post in relevant thread and stop flooding General Section
I request you
Please
Don't make new threads for these topics
You may make new threads if you want to discuss about any developing thing in which you are having a problem.
Or a question peculiar in topic(not general) which was not answered before.
Click to expand...
Click to collapse
thanks for the advice but I thought it might be interesting to start talking about this application even from my problem with the same ...
Here I want to give. how to root k900
1 first download (inb) file at here! https://disk.yandex.com/public/?hash=7s8h1Xn1VP+rDQuXX6gGylP6xlTNMWkrzma8NHcHKrI=
After success download ind file, Please place its that (inb file) at buit in memory.
ok here they way to do its!
1-put inb file into sd main
2 create sdfuse folder.
3-put inb file into sdfuse
4-reboot-your k900 into recovery mode with long press volume up and together with power button.
5-after reboot to recovery mode use up and down volume button to navi up side down.
6-choose sdupdate and press power button
7-after finish update reboot again.
8-yeah bingo and u can see (Superuser) was already in u lenovo K900:good:
Hope i can sharing to everyone !! And Sorry About my Bad English
anyone tried ?
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Need some advice on getting this K900! Please n.n
Evaravenspell said:
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Click to expand...
Click to collapse
Hey! Thank you so much for the upload!! It's downloading at 1.3MBps. ha n.n Just in time for me that I come here only sometimes!
Although I don't really need it right now I think I'll need it cause I'm going to buy this K900 very soon! I'm actually about to order it today! Is this file the latest ROM?
Do you have the K900? Can you, please, encourage or discourage me about getting it? What do you say? I love its desing and size, and I like it's Intel's chip in it. I've had a Razr i and was great!
I've followed this forum months ago, but have missed all news about this device. Can you tell me if this device will get any update like 4.3 or 4.4? Any good changes in the last months with software updates? I've heard it heated a lot at first. :/
Anything you could tell me about how this device is doing now could help me!
Thank you!
- Leonardo
Need some advice on getting this K900! Please n.n
Sw33t_Lov3r said:
Hey! Thank you so much for the upload!! It's downloading at 1.3MBps. ha n.n Just in time for me that I come here only sometimes!
Although I don't really need it right now I think I'll need it cause I'm going to buy this K900 very soon! I'm actually about to order it today! Is this file the latest ROM?
Do you have the K900? Can you, please, encourage or discourage me about getting it? What do you say? I love its desing and size, and I like it's Intel's chip in it. I've had a Razr i and was great!
I've followed this forum months ago, but have missed all news about this device. Can you tell me if this device will get any update like 4.3 or 4.4? Any good changes in the last months with software updates? I've heard it heated a lot at first. :/
Anything you could tell me about how this device is doing now could help me!
Thank you!
- Leonardo
Need some advice on getting this K900! Please n.n
Click to expand...
Click to collapse
The phone is good. Im very satisfied. There has been rumors that we will get the 4.3 update but not sure when. Yes the phone heats up sometimes but with the latest updates i feel like its gone down tremendously. There is no actual flaw to this phone i really like it. I will be using it until the K910 is officially released in my country. I wanna try an LTE phone lol.
HereSomeScreenShot
Here my Lenovo K900 After (Rooted) With latest Firmware onK900_ROW_1_S_009_0288_131277
Evaravenspell said:
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Click to expand...
Click to collapse
Yes I know its very much "legit" . I had no problem in downloading the file uploaded initially. I will try this soon as my phone is just a week old and just wana make sure everything fine with it as after rooting I will loose its warranty.
Just a single question I have is, when on lock screen I press PIN code the whole screen brightness kinda flicker/brighten up on touch. Is it normal or its only me getting this? Also screen brightness varies while I use the phone!
Yes I know its very much "legit" . I had no problem in downloading the file uploaded initially. I will try this soon as my phone is just a week old and just wana make sure everything fine with it as after rooting I will loose its warranty.
Just a single question I have is, when on lock screen I press PIN code the whole screen brightness kinda flicker/brighten up on touch. Is it normal or its only me getting this? Also screen brightness varies while I use the phone!
Rshahzad......can i known is, What version do u own now at u K900?
Rshahzad......can i known is, What version do u own now at u K900?
Its 32 gb non-rooted. See the snapshot !
Will this reformat phone?
Will these delete everything? I mean reset the phone?
dade14 said:
Will these delete everything? I mean reset the phone?
Click to expand...
Click to collapse
Yes, update of .inb file allways erases data
Help
stevenchew said:
Here my Lenovo K900 After (Rooted) With latest Firmware onK900_ROW_1_S_009_0288_131277
Click to expand...
Click to collapse
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
Which ROM you now use?
Same problem !
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
felipemichelr said:
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
Click to expand...
Click to collapse
Just flashed successfully and the phone is also running perfectly.. saw superuser access request on the start
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
Sent from my Lenovo K900_ROW using xda app-developers app
felipemichelr said:
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
Click to expand...
Click to collapse
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
Thanks all but
Thanks for your efforts ..
If this process is totally successful and every thing is good , but suppose that i decided to remove the root and back to stock kernel ??
Are there any easy methods ??
Any advice???
just_lion said:
Thanks for your efforts ..
If this process is totally successful and every thing is good , but suppose that i decided to remove the root and back to stock kernel ??
Are there any easy methods ??
Any advice???
Click to expand...
Click to collapse
Just go to superuser and hit the unroot button. Only stock kernel is available, no custom kernels around yet.
Sent from my Lenovo K900_ROW using xda app-developers app