I found out many info after reading other threads about pagepool editing.
Jiggs open my ideas to read and have an info about pagepool editing.
With this site, he discussed it in a simple way:
http://buzzdev.net/read.php?71,31876
How To: Adjust PagePool for the XDA Atom
byJiggs
Tools:
1. Image file of the atom diskimage_Ver.nb0
2. Hex Editor
Instructions:
1. locate the first occurrence of the following hex values:
FF FF FF FF FF FF FF FF 9B 4F FF FF 64 B0 00 00
2. You will see something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4MB = 00 00 40 00
6MB = 00 00 60 00
8MB = 00 00 80 00
Our Atom comes with 8MB pagepool, after experimenting though, 4MB is okay, 2MB still works though... It's your choice.
3. Of course, you need to flash back the new ROM to your device.
Very simple instructions and straight forward.
Because of this I thought pagepool editing can be done only by editing NBO FILE and we really need to flash back our atom. Like discussed also in other forum device.
xda-developers > Elf > Elf upgrading etc.
PagePool Smart Changer
http://forum.xda-developers.com/showthread.php?t=326006
xda-developers > Hermes > Hermes upgrading etc.
PagePool Changer
http://forum.xda-developers.com/showthread.php?t=323269.
Now I Found out something, They tried to change pagepool on their device without flashing their ROM & they are succesfull.
xda-developers > Elf > Elf upgrading etc.
Change pagepool size! The EASY way!
http://forum.xda-developers.com/showthread.php?t=324594
vippie said:
Fist of all! All credits go to paradis_pal because he came with this solution for the prophet. I've just edited the offset to make it work for the touch (should work for the wing too as they share the offset)!
Also thanks to Paul from Modaco for his guide to do it manually!
It's now possible to change the pagepool size of a rom (4, 6, 8 and 12 mb) with this tool and just a soft reset afterwards!
I strongly recommend flashing USPL before doing this. It isn't necessary, but if you're device fails to start you want to be able to flash a rom from bootloader!
Steps to take:
- Download and Unpack "Change pagepool size TOUCH.zip"
- Connect your device with activesync!
- Copy EnableRapi.cab to your device and run it
- Make a safety backup using "backup.bat" (takes only a few seconds) and check if there's a file called "backup.nb" afterwards!
- run the bat (takes only a few seconds) with the pagepool size of your choice! (ex: 4mb = 4mb pool.bat)
- Soft reset and enjoy your new pagepool size!
If anything goes wrong you can flash back the old value with restore.bat!
Use at your own risk!
Click to expand...
Click to collapse
xda-developers > Prophet > Prophet mobile 6 >
Change PagePool for WM6 ROM 4.0.0.0 using ActiveSync
http://forum.xda-developers.com/showthread.php?p=1442907#post1442907
paradis_pal said:
if you want to test it then please backup first using backup.bat and restore by restore.bat if you have errors, then softreset
no need to hard reset or install new Rom, just soft rest
please use this at your own risk, don't do it unless you know what it is
first install EnableRapi.cab I'll attach it
in shortcut, this will change the memory for youlike this:
4mb pool.bat will make the total memory 52mb
6mb pool.bat will make the total memory 50mb
8mb pool.bat will make the total memory 48mb
12mb pool.bat will make the total memory 44mb the official.
it will take only few seconds, 1 or 2 seconds
only now softreset no need to hardrest or format
you may backup the old byte by backup.bat and restore by restore.bat
please don't blame me if you do anything wrong
and just wish me best of luck if this works for you as I
copyright to me
Click to expand...
Click to collapse
Im trying now to figure out if we can do this easy way to our ATOM. Im already trying to communicate to the thread and see their opinion.
Jiggs, can we do this in our atom? Just asking bro...thanks a lot
...if we manage to pull this off, COOL! It would save tons of time on testing and reflashing. I hope it can be done.
Also, if there was a way to simply flash a small part of the ROM without forcing a hard reset, I think we'd all love that too. The one thing I miss from the O2 Mini is that I could easily throw in a bootload screen without junking my entire install base.
generalriden said:
I found out many info after reading other threads about pagepool editing.
Jiggs open my ideas to read and have an info about pagepool editing.
With this site, he discussed it in a simple way:
http://buzzdev.net/read.php?71,31876
How To: Adjust PagePool for the XDA Atom
byJiggs
Tools:
1. Image file of the atom diskimage_Ver.nb0
2. Hex Editor
Hi Generalriden,
Did you get my pm re Resco Explorer 2007?
I've read all these, that's why I was asking about the procedure of changing the page pool without re flashing the rom, hoping that we can use it in our atom..It would be taxing to reflash..
Best Regards,
Click to expand...
Click to collapse
I have requested already the developer of the Smart Pagepool Changer. SharkinDark. Unfortunately, it doesn't work on our device yet. Although he said that the device info is already included in his program and should work.
When I use his program, it simply says its CID Locked. I'm not sure how to go about it. CID is new to me. All the while I thought we were CID unlocked because we can flash any ROM anytime.
You can follow the thread I requested from him since September 11, 2007.
http://forum.xda-developers.com/showthread.php?t=326006
I always update using SD Card (256mb) method. So, updating for me only takes 10min max especially when I do a lot of testing. BUT THIS REQUIRES THE EXACT FORMAT FOR SD CARD FLASHING. Renaming diskimage_ver.nb0 to diskimg.nbo IS NOT ENOUGH!
jiggs said:
I have requested already the developer of the Smart Pagepool Changer. SharkinDark. Unfortunately, it doesn't work on our device yet. Although he said that the device info is already included in his program and should work.
When I use his program, it simply says its CID Locked. I'm not sure how to go about it. CID is new to me. All the while I thought we were CID unlocked because we can flash any ROM anytime.
You can follow the thread I requested from him since September 11, 2007.
http://forum.xda-developers.com/showthread.php?t=326006
I always update using SD Card (256mb) method. So, updating for me only takes 10min max especially when I do a lot of testing. BUT THIS REQUIRES THE EXACT FORMAT FOR SD CARD FLASHING. Renaming diskimage_ver.nb0 to diskimg.nbo IS NOT ENOUGH!
Click to expand...
Click to collapse
thanks jiggs...
Hi,
Used hex editor and changed the pagepool frm 4mb to 8mb and flashed . No problem .Though program memory is increased In Setting---> system info shows 4mb pagepool , Can this be changed though it does not matter?
hope sharkindark in the forum mentioned by jiggs help us so we can do the easy way...
chaksu said:
Hi,
Used hex editor and changed the pagepool frm 4mb to 8mb and flashed . No problem .Though program memory is increased In Setting---> system info shows 4mb pagepool , Can this be changed though it does not matter?
Click to expand...
Click to collapse
info found in version.txt. you need to dump it and rebuild rom using mamaich tools.
jiggs said:
I have requested already the developer of the Smart Pagepool Changer. SharkinDark. Unfortunately, it doesn't work on our device yet. Although he said that the device info is already included in his program and should work.
When I use his program, it simply says its CID Locked. I'm not sure how to go about it. CID is new to me. All the while I thought we were CID unlocked because we can flash any ROM anytime.
You can follow the thread I requested from him since September 11, 2007.
http://forum.xda-developers.com/showthread.php?t=326006
I always update using SD Card (256mb) method. So, updating for me only takes 10min max especially when I do a lot of testing. BUT THIS REQUIRES THE EXACT FORMAT FOR SD CARD FLASHING. Renaming diskimage_ver.nb0 to diskimg.nbo IS NOT ENOUGH!
Click to expand...
Click to collapse
i f we can only find out how to unlocked, we can do this...even sharkindark cannot say something regarding this :-(
I cant do it with my exec, hic hic (
OMG i didn't understand anything
scounter said:
I cant do it with my exec, hic hic (
Click to expand...
Click to collapse
you really cant, even us in our atom
Related
Updated 1-2-2006 22:25
Although I planned this almost a year ago, I finally migrated succesfully to WM2003SE. I decided to go for the only 'official' version: 2.20.07 as the main OS. Offcourse I used the WWE translated version by mamaich and buzz_lightyear.
The Ext_ROM is quite generic but does contain T-Mobile NL specific GPRS settings. There is NO T-Mobile skinning! And I love my self-made HTC Himalaya splash-screens 8)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The operator ID of the files is TMOBILE (remember to change that when your device is non-T-Mobile via ie. ER2003Edit )
Info:
OS 2.20.07CHS (translated to WWE)
Radio 1.18
Ext 2.20.904 (also includes WWE help-files)
Extra info:
There are occasional places where you will notice names in 'strange'characters (mainly square boxes). These are places where de translation was not possible / done.:
- Some folder names: Seems possible to delete these
- Network settings: You can rename them (but not delete)
Some files in My Documents (ie IA Caller ID Pictures and templates) are stored with system/hidden/etc properties that prevent Activesync to sync these files. Use (the enclosed CE Total Commander) to unchek all properties changeable to prevent this behaviour
(included links as upload in thread did not work, use cut&paste to download!)
Extended ROM only:
ftp://xda:[email protected]/Uploads/Himalaya_WM2003SE_2.20.904_TMO_WWE_ExtROM_only.rar
Full package:
ftp://xda:[email protected]/Uploads/Himalaya_WM2003SE_2.20.904_TMO_WWE_Upgrade_package.rar
Splash files only:
ftp://xda:[email protected]/Uploads/2.20.904 Splash/
the forum mess up your ftp url's or at least it does in firefox
but copy paste and remove a space fixed it
Another coool WM2003se release
Thnx I'll give it a bash
fixed the links.
Is there anyway to bypass the country ID error? When i try upgrading using your ROM, i always encounter this problem. Any advice is greatly appreciated.
Thanks edsub for the beautiful splash screen.
I updated the diamond version to this one. Problem was to keep al my installed programs intact, but using sprite backup and manually copying the storage everything was back as it used to be. The interesting point is, that the PDA gives the extended rom from diamond as being installed while the new ones are seen in the remove program utility :shock:
Neither can I find the help files other than in chinese (that means blocks on the screen) so it isn't quiet complete yet. As far as I can see the OS is more stable and a fractional faster. Any help to complete the make over :wink:
Next: after a cold reboot there seems to be no ext.rom installed at all (as far as the program tells), only after a restore it's back. Does it has anything to do with PersaveBackup?
This morning I migrated to WM2003se, I bypassed the Country ID following the procedure written by dcs.
All seems ok but I have noticed isn't anymore installed "Graffiti" that I usually use to write. Anyone knows where I can dowmload the program ?
Thanks
After some experiments I went back to the Diamond ROM because I had trouble with the phonesignal: no ringtones. And the pda hesitated a lot during routeplanner, problems with the mediaplayer, problems with the Ext. rom. I guess everything is to solve but it costs me a lot of time and most of all: I mist several phonecalls because i didn't hear the ring.
@henk-jan strange. there IS a ext rom in the package (ms_.nbf) should work as normal. one possibility: did you have the extrom unlocked when resetted the device? as the files are not readonly they are then deleted after 1st use.
ringtones & help are installed from extrom, so again same reason. as is performance while navigating.
I now have my wizard but 2.20 was way better than diamond
@Ed: I know there is a Ext.rom and it is shown in the explorer, but the device info doesn't show the Ext rom version :shock:
Going back to the diamond rom the same happens so it must be a problem in my Qtek2020.
Why do you consider V 2.20 (chinees) better then 2.06 (diamond)
Diamond was based of the 2.06 test ROM.
It was relatively stable, but also slow. And BT did not always work as expected (there was a patch for the hide&seek bt icon issue however)
2.20.07 is much faster, has all the BT support you need and has WMP10
But I must admit its also a matter of taste: I switched over when I had performance issues with 2.06. But those issues were there in 2.20 also (fixed by setting up cache for filesystem and the vulome priority hack)
About your ExtROM: The versio number is set by one of the cabs. In y rom that was the cab with the version number 2.20.904 in the name.
I cant imaging that did not run, but after all: all the issues you name can be caused by not installing from ExtROM in the first place.
I think the start program in the ext rom doesn't run. It is installed on the pda, but didn't run I guess.
Perhaps 2.06 is a bit slower but e registry hack and a speeding up utility solves that, but most of all: it works as it has to. I didn't get that with 2.20
So I take it for adventage. Thanks for your help.
Problem solved: playing with WM 5 and installing the DOC tool from Buzz_lighyear I changed the Ext rom and storage memory. Putting it back to the original state everything is OK now and the 2.20 is running smoothly on my PDA. Only frustrating to re-install all the programs one by one because sprite restores also the problems back.
This ROM is French ??
Hello to all,
I begin in the field of the ROMs and I would have some questions.
- Is this new ROM in Frenchwoman?
- Later upgrade of the ROM, I may restore an ancient(former) protection since Active Sync?
Thank you in advance...
i just updated, but my transcriber letter recognition has vanished and fonts in menu are too big and nun-smooth.
smoothing and changing size doesn't work
help!
thanx
LINK NOT WORKING
Can some one post the links again as i cannot seem to download the file. I'm getting the following message:
ISA Server: extended error message :
200 Switching to Binary mode.
200 PORT command successful. Consider using PASV.
550 Failed to open file.
Can anyone help me
Sak_ said:
i just updated, but my transcriber letter recognition has vanished and fonts in menu are too big and nun-smooth.
smoothing and changing size doesn't work
help!
thanx
Click to expand...
Click to collapse
i also have same problem, input only keyboard and intellipad, the other which are there in 2.06 are missing.
Anybody can help?
transciber and stuff are simply not there, simply because it is a CHT rom that is translated.
The fonts improve when using cleartype.
rom 2.20.07
I m in same boat as some of u
Have anyone found the solutions to get other imput options?
In my case I only had keyboard working...
for a few months after flashing my hmalaya with rom 2.20 the imput options is left with only keyboard.
Letter recognizer is missing and the othe imput programs eg word logic, resco keyboard,calligrapher cannot be activated after installation
Any solutions?????
what must I do to be able to use the other imput methods?????
Or is it that for himalaya rom2.20 keyboard shall remain as the only imput method and no other methods of imput can be used????? If so can someone pls. tell us so that we who r in the dark will ask no more until a day a genius samaritan come along n show us another way again
Many thanks in advance
In contiune of Absolutely new and different WM6 ROM for Prophet! (Korand WWE1 Clean):
WM6 Korand WWE 2.1 Clean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- OS 5.2.1938 (Build 18128.2.2.0) - the last official build from Kaiser
- 8Mb poolsize
- Office 6.1
- NetCF 3.5
- Big Storage (63.18 Mb / 55.3 Mb available according to the current device)
- 27 Mb free of RAM when you delete all links from Windows\StartUp folder
Fixes and improvements:
- MMS added
- Camera fix (no artefacts while overclocking)
- Start and menu sounds fixed
- Internet Sharing and Java Midlet Manager links added to Start menu
- Settings / External GPS link added
- Remote Desktop added
- SMSDRfix added
- WM5torage added
- HTC scroll added
- IE cache and Camera default save place moved to Storage card
- Original input methods
- IE slow scroll fix
- Sound and voice improvements
- Power improvements
- Speed improvements
Update instructions:
1. Download g4.zip attached if you have G4 device or download g3.zip attached if you have G3 device. Unpack it to some place on you PC. You will have 2 dirs inside: "jumpspl" and "update"
2. Copy 3 files from "jumpspl" dir to the root of your Prophet (near Windows folder)
3. Download and unpack nk.nbf to "update" folder on your PC ( Download link: http://rapidshare.com/files/75941401/korand_wwe_clean_2_1.rar.html )
4. Disconnect your device form PC
5. Run "SPL.lnk" in the root of your device from File manager. You will see a white screen
6. Connect your device to PC with USB cable
7. Run "ROMUpdateUtility.exe" in "update" folder and follow all steps
8. You can see process indicator only on PC! Screen of your device will be white during all update process. When finished your device will reboot.
9. Enjoy
---
If you want to change poolsize - download "korand_wwe_1_change_pool_size.zip". This is patched Paradis utils. Just connect your device to PC with Activesync and run .bat with needed poolsize.
screenshot please
Screenshot???
No screenshots because you can't see something new - clean official rom with official theme It's a new version of Korand WWE1 rom with new build and some fixes and improvements.
Flashing and hoping
sorry i can't understand
Korand unfortunately I think this rom has the same problem as Crystal V5. You can not install applications that are not signed.
hma4 said:
Korand unfortunately I think this rom has the same problem as Crystal V5. You can not install applications that are not signed.
Click to expand...
Click to collapse
You are not right on 100% Some of the specific applications and root sertificates really can't be installed.
I tried to remove the sertificate from custom keyboard that I can't install - and its installed with no problems. The problem is to install applications with some kind of sertificates i think...
But all soft I use has no problem to install: SpbPhoneSuite, SpbWeather, SpbPocketPlus, BatteryStatus, Cash Organizer, Vehicle Manager, Resco Explorer and many others (including customized Commanagers, keyboards and others).
any chance on getting a 4shared link? Tnx
Total Storage= 63.18mb, Total Program = 44.01mb
Total Storage= 63.18mb, Total Program = 44.01mb
Not As Little As The 1st Post ~~~~~~~
With nothing in startup folder and today screen, Memory result like this:----
Free Storage: 57.9MB, Program Free: 24.37
Sorry for my stupid question. Iàm in the original WM5 now. When I do this new methode 1. Jumpspl. 2. update romupdateutility 3. Start your software. I always stuck in bootloadermodus. Where is my mystake. Please can me help ?
dioxda2 said:
Total Storage= 63.18mb, Total Program = 44.01mb
Not As Little As The 1st Post ~~~~~~~
With nothing in startup folder and today screen, Memory result like this:----
Free Storage: 57.9MB, Program Free: 24.37
Click to expand...
Click to collapse
Are you have G3 or G4 device? Looks like G3 devices has 10Mb bigger Storage than G4...
Many thanks for the astunishing release part 2!!!
A lot of issues especially something "long been ignored" such as the "slow scroll" have been attended.
Wonder if it is a good idea for you to cook a "Far-East friendly version" with the wince.nls supporting Chinese regions like EVO8en, Mysterious and Gullum's multi-language version had done.
This is critical for Chinese readers because a post-flash-overwritten wince.nls can ALWAYS distablize an otherwise perfect rom.
Thanks for your effort again and look forward to the Far-East friendly version's release^^
Wow, this release is fantastic: very fast and without any big problem..
There are only 3 things I would change:
1- Old Arcsoft MMS (it's so old that the network wizard doesn't work with it and I have to manually change the settings when I change the SIM card
2- Old Midlet Manager (having few issues with some midlets)
3- The Font in the Comm Manager
If there is a way to fix these two things it would be the ROM for me
Thanks Korand!!
Sam Trevi said:
1- Old Arcsoft MMS (it's so old that the network wizard doesn't work with it and I have to manually change the settings when I change the SIM card
Click to expand...
Click to collapse
Actually I can't enter the parameters manually: it doesn't save them..
Any suggestions?
NEO130 said:
Sorry for my stupid question. Iàm in the original WM5 now. When I do this new methode 1. Jumpspl. 2. update romupdateutility 3. Start your software. I always stuck in bootloadermodus. Where is my mystake. Please can me help ?
Click to expand...
Click to collapse
Quick information
1.Check your device..either it is G3 or G4..
2.Do the HardSPL.
3. copy/put your rom (nk.nbf) into Rom update utility..
follow the instruction & you're done..
further info
http://forum.xda-developers.com/showthread.php?t=350033
or maybe you might try to hard reset after flashing it but stuck on the boot screen..
or try flash it all over again..
all of this come from my own experience..
goodluck
Pretty good rom. I've had to install more than I'm used to having to get it all how I want it, but it's still fast after the stuff's installed and at least there's room for it!
Sad news is Contacts isn't working. I've had this before on other roms sometimes but I don't know ow to work round it.
Thanks!
littld said:
Pretty good rom. I've had to install more than I'm used to having to get it all how I want it, but it's still fast after the stuff's installed and at least there's room for it!
Sad news is Contacts isn't working. I've had this before on other roms sometimes but I don't know ow to work round it.
Thanks!
Click to expand...
Click to collapse
Try to rename "pim.vol" in the root of device to "pim1.vol" then reset device and syncronise contacts from PC. Aftert that you can delete "pim1.vol".
Are you using any backup program?
Korand i love your first rom! So fast! Is this as fast as your first version ? Gonna try this out ..
can anyone assist to upload to 4shared? Thanks a million
dioxda2's [size=+3]2a - eXtreme PROPHET - 20270.1.3.1 (dark) edition[/size] released
(Salute to Lamson in the PDAViet... ^_^),
Another rom with newer build!!! as usual, less than 7 minutes (less then 5 minutes for my new PC) flash, thanks for the Lazy_Tool ^_^ )
(all unzip password = dioxda2)
cabs will be deleted after install, please back up. ^_^
To All,
This newer release MAY NOT fast like my 1d !!!
1. NO MORE changes your splash screen (pressurized SPLASH has been deleted) !!!
2. Default ringtone files had been modified.....
3. Please put your own theme ( *.tsk), it is black color now...)
4. if you really love .Net CF 3.5, go for this rom then....
4.1 if you want a later built, go for this version then...
5. by default, there are folders built for convenience :
"Learnings" on the Start Menu, "My Prophet" in the My Documents," Prophet Tools" in Programs .....
6. tricks and skills from 1d is working in here like WkTask......
Please Be Noted !!
__________________
Click to expand...
Click to collapse
for 2a - eXtreme PROPHET - (dark) edition,
4MB PagePool
~9MB extended_rom (function as a storage card, please see the video attached for how to),
31+MB (4MB PP) program memory ( after hard-reset),
61+MB Storage memory,
1. Windows Mobile 6.1 (CS OS 5.2.20270 (Build 20270.1.3.1) 2a
2. Net framework 3.5.7283.0
3. 10 button comm manager
4. HTC X-Button v2.1.33556.2
5. SMS mode switch
6. Internet Connection Sharing
7. TTcalcPad ( a very useful input panel calculator),
8. Asian regional selection ready,
9. UC compatible ( too long time had been spent on this... +_+ ),
10. Total power off bug FIXED
11. softkey applet,
12. battfix (will install automatically (autorun) after flash),
13. no power point,
14. no onenote,
15. no HTC Home,
TRY FOR YOUR OWN WISH... NO QUESTIONS for me please (but may helped by other seniors here)
ii/. camera theme ready, (please copy theme from \windows to my documents\template)
or download here~~~ AND PLACE TO my documents\template
enjoy ~~~
- tutorial ready for skillful use of Total Commander, ( attached, please play in slow motion if you can....)
if you need Voice Speed Dial : http://www.4shared.com/file/55482593/4ca4af2/VSD.html?dirPwdVerified=2948f2e
if you need Chinese fonts : http://www.4shared.com/file/54624626/1176342d/FontLink8MB_ttc.html?dirPwdVerified=2948f2e
if you need MMS: http://www.4shared.com/file/5548234...oser_5_0_31_16_2_.html?dirPwdVerified=2948f2e
if you need HTC_home (V2.x): http://www.4shared.com/file/55485469/ff92edad/HTC_Home_Diamond.html?dirPwdVerified=2948f2e(thx VaranusVincent ^_^)
if you need diamond Style HTC_home skin: http://www.4shared.com/file/55485469/ff92edad/HTC_Home_Diamond.html?dirPwdVerified=2948f2e
if you need Java machine: http://www.4shared.com/file/55484947/9a78561e/JM_online.html?dirPwdVerified=2948f2e
[size=+6]( UPLOADED ~~~~ ^_^ )[/size]
[size=+3]4MB PagePool[/size]
.......2a 4shared download - 39MB zip file
.......2a rapidshare download - 39MB zip file
i/. for Chinese support
For those need to display Chinese character, use
THIS .... 4shared download mirror
THIS ... rapidshare download mirror
download and unzip..........
1. import the registry value,
2. copy the mingliu.ttc (8MB) to \windows directory (prophet)
3. use software to soft-reset (ALWAYS)
For Chinese input method including full screen hand writing, please download
the zip file attached
in this post and install them ( 2 cabs) - recommended !!!^_^
enjoy ~~~
other screen shots from me. ^_^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
~~~~~~~~Welcome................ .................... welcomehead...........................nothing will be on Today screen....
.......
As a member in XDA, may try to think a donate?................................
Happy flashing ~~~
enjoy~~
Click to expand...
Click to collapse
Great,I will flash it as soon as possible
Looks great dioxda2!
Am i blind or did you not post the dl link for this great rom?
Greetings,
Skylow
can not find your D/L
Hi
I also want to download, where is the link? This looks like a new great step ahead! Thanks in advance.
hi dioxda2
why not use 6 pp or 8 pp
uploaded~~~~~~~~~
[size=+6]( UPLOADED ~~~~ )[/size]
What is the BONUS NVID for prophet. I wonder what to flash my prophet? BONUS NVID or NVID. Thks
Thanks!
What's the diffirence between pagepool size again?
Thanks!
Thanks,looks nice.
but if u change comm manager to diamond style it would be better
extended rom
Hi Guys,
I have seen the video to use the extended rom. Forgive to be stupid, but I really don't have a clue how to do it. Can someone send me some details on how to do it?
thx
ram
I viewed and reviewed the video several times and I tried to get the ext_rom working also several times with no luck.
BTW I only have 59 mb storage and about 26 mb prog
eddyve said:
Hi Guys,
I have seen the video to use the extended rom. Forgive to be stupid, but I really don't have a clue how to do it. Can someone send me some details on how to do it?
thx
ram
I viewed and reviewed the video several times and I tried to get the ext_rom working also several times with no luck.
BTW I only have 59 mb storage and about 26 mb prog
Click to expand...
Click to collapse
1. in the Total Commander, just type \extended_rom\ at the top address bar,
2. in the virtual 2 windows mode, just copy and paste then...
3. Mine is a G3, you might had a G4 then, different ram........
albert_betet said:
hi dioxda2
why not use 6 pp or 8 pp
Click to expand...
Click to collapse
Sorry~~~
Just a bot too busy~~~
hey dioxda2!
prophet tools folder is empty in program section.
i have installed without htc home with 2ppz.
how about the message deleverery notification. is is disable or enable?
one more problem , on otday screen i can't see windows flag i only can see start .
i have g4 model.
thanks
what is all about this learning on start menu. it didn't work . blank .
is this some thing i didn't understand.
thanks
rasa said:
what is all about this learning on start menu. it didn't work . blank .
is this some thing i didn't understand.
thanks
Click to expand...
Click to collapse
1. what do you mean by start menu problem?
2. Do you mean that you make it to 2MB pagepool?
DON"T make it lower than 4 MB PP>>>>>>>>>
3. "prophet tools folder is empty" ---- normal, I had put nothing in it, just for you to use.....
4.Message delivery notification is disabled,
5. today screen can't see windows flag? Will it appear when you tap it? Function normal?
This rom is no good????
thanks for the Asian regional selection!!
What about speedDial?
When i type some name from SimContacts, it dont suggest any variants, only one - MailBox.
Is it known problem?
HaiLian said:
thanks for the Asian regional selection!!
Click to expand...
Click to collapse
haha, actually, " 1d " is really the fastest rom that I had ever met in this forum....
dear HaiLian, if you can read Chinese, please go here, 19214 built-in Chinese support......
http://www.mobile01.com/topicdetail.php?f=224&t=707669&last=7242739
an 19214 Taiwanese version made by me..... ( well not all Chinese UI, just a few names .... )
thanks . its ok and seems to be a nice rom
and the latest build !!!
but how can I find and replace the dialler in 1d with this one ?
the dialler in 1d was very nice and fast and comforting.
Dear all,
Once again i start a thread referring to HEX code
If you have a security unlocked Raphael and yo wish to use a Diamond radio ROM [at least in Portugal it proved to be MUCH more effective] you can flash it by following two different procedures:
:: RAPHAEL SIGNED DIAMOND ROM'S REPOSITORY ::
1.00.25.05
1.00.25.16
:: QUITE EASY :: NOT SO FAST :: NOT SO SAFE ::
1. Flash your radio ROM via a Windows PC
2. Flash your radio ROM with the standard wrapper
:: MUCH SAFER :: QUITE FASTER :: NOT SO EASY ::
I. If you do not have a windows PC
II. If you want to be almost sure the flashing process will be smooth and with no trouble at all.
III. If you want to flash your radio ROM ensuring the process will be fast and clean
IV. If you are comfortable with HEX Editing
1. Open your nbh ROM file with a HEX Editor
2. Find the string value DIAM***** or the code 44 49 41 4D 2A 2A 2A 2A 2A [Byte 65 (Line 2)]
3. Change the string value to RAPH***** or to the code 52 41 50 48 2A 2A 2A 2A 2A [Byte 65 (Line 2)]
4. Save the file
5. Rename it after RAPHIMG.nbh
6. Place it on the root of your SD Card
7. Be sure to have at least 50% of battery charge
8. Boot the device into bootloader [Vol. down + Soft reset]
9. Follow on-screen instructions
NOTES
1. Even if your device is security unlocked, if you use a standard Diamond radio ROM, using the SD Card flash method you will get a device error.
2. If you sign the file as being Raphael's instead of Diamond's you will no longer get the above mentioned error and yet, you will get the correct radio version given the fact the code is exactly the same. Only the signing header changes
3. If you perform a binary compare you will see that the difference between the Raphael signed and the Diamond signed files is only 4 characters [DIAM / RAPH].
4. This process is quite fast and pretty straightforward
5. If you need any help or if you have any doubts please DO ask before you do anything. You can avoid quite some problems.
Good luck and cheers!
P.S. Tank you for your collaboration JCEspi2005
If you are not sure how use an HEX editor, this is another way to get a raphael flaseable file from a Diamond Radio NBH file...
First download the attached file, and extract in a folder. This package contains the NBHExtract tool to get the NB file from the Diamond NBH file, and the HTCRomTool.
1. When you have all files in the folder, first step is getting the radio NB file. Drag and Drop the NBH file into NBHExtract.exe to get the NB one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Start the htcrt.exe file and in Build tab, select Raphael device and choose the radio NB file extracted in step before as show next image.
Press Build button and save the file as RUU_Signed.NBH and overwrite the old (diamond) one. Use this NBH file with Raphael CustomRUU to flash or use the SD card flash method described in first post.
Cheers
That is nice to hear that you can actually use diamond radios on the raphael.
Will try as soon as I get home.
Thanks,
Obrigado, Kevlar
Gracias, jcespi2005
Very good info Kelvar, looks like you are gonna be our HEX reference .
Thanks for the info. Keep it updated.
microfox said:
Very good info Kelvar, looks like you are gonna be our HEX reference .
Thanks for the info. Keep it updated.
Click to expand...
Click to collapse
Kevlar is an sHEX machine.... (only joking, you know...)
sumitescp said:
That is nice to hear that you can actually use diamond radios on the raphael.
Will try as soon as I get home.
Thanks,
Obrigado, Kevlar
Gracias, jcespi2005
Click to expand...
Click to collapse
Para se usarem radio ROM's de Diamond no Raphael / Touch Pro, é preciso ter um dispositivo que esteja security unlocked. Para tal é necessário usar a ferramenta de security unlock do Olinex e - para tal - pagar o preço que custa.
Todos os Raphael / Touch Pro são security locked por defeito.
Cumprimentos.
-----------------------------------------------------------------------------------------------------------------------------
In order for Dimond radio ROM's to be used on Rapahel / Touch Pro, a security unlocked device is needed. In order to do so you must use Olinex security unlock tool adn pay for it.
All Raphael / Touch Pro are security locked by defaut.
Cheers.
Is the reverse also possible? Porting Raphael ROMS to Diamond?
By the way, why would one use a Diamond ROM... to me, it seems like asking for compatibility issues with your Raphael?
Ehm about that all TP are locked part. If you can flash a radio ROM your device isn't locked, correct?"If yes than I have to disagree with you on the locked part. I didn't unlock anything, except Hard_SPL that is. I thought it was the other way around. All original HTC TP are unlocked and all branded are locked.
ehmPlankje said:
Is the reverse also possible? Porting Raphael ROMS to Diamond?
By the way, why would one use a Diamond ROM... to me, it seems like asking for compatibility issues with your Raphael?
Click to expand...
Click to collapse
mmm not sure about raphael radio ROMs, but perhaps the same with security unlock. about the "why", i come from Kaiser, and flashed many niki and neon radio ROMs on my Kaiser. So the answer for me is "and why not". You can test more radio ROMs and find a better one for you...
Die Bruine said:
Ehm about that all TP are locked part. If you can flash a radio ROM your device isn't locked, correct?"If yes than I have to disagree with you on the locked part. I didn't unlock anything, except Hard_SPL that is. I thought it was the other way around. All original HTC TP are unlocked and all branded are locked.
Click to expand...
Click to collapse
There are three locks on TP, SIM Lock, CID Lock and Security Lock (and really another one, regional Lock). You can flas a radio ROM only with hardSPL but you'll get in troubles...
Read this for more info http://forum.xda-developers.com/showpost.php?p=2566863&postcount=28 and the whole thread...
Cheers
I read that thread. I wasn't trying to be ignorant when I flashed my Raphael. I read a few comments of people who got an error when flashing a locked Raphael, so I just assumed it wouldn't work if your device wasn't unlocked. Since I didn't receive an error whatsoever I again assumed my device was unlocked.
I took another look at the Wiki. It implies (maybe just to me) that a Raphael can be flashed with a radio just using hard SPL, but that a Diamond does need to be security unlocked. If not, I'm really curious what the "problems" might be. I went from .19 to .32 and am now using .28 without any problems (on my ROMeOS 1.40).
jcespi2005 said:
If you are not sure how use an HEX editor, this is another way to get a raphael flaseable file from a Diamond Radio NBH file...
Cheers
Click to expand...
Click to collapse
If i use this methode i got errors, i used Diamond_Radio_1.00.25.05 if i imported in htcrt.exe i give this errors
"Size of this file is less than default, do you want to assign this file?" i choose Yes.
The next error is "Do you want to pad this file with trailing 0x00's to achieve default"
if i choose yes or no de imageupload to my raphael give after sending the image the next code
Upgrade ROM code error please try again.
Paphael will only boot in boatloaderscreen, befor ethat he give a message No image
who can help?
sgsdebruijn said:
If i use this methode i got errors, i used Diamond_Radio_1.00.25.05 if i imported in htcrt.exe i give this errors
"Size of this file is less than default, do you want to assign this file?" i choose Yes.
The next error is "Do you want to pad this file with trailing 0x00's to achieve default"
if i choose yes or no de imageupload to my raphael give after sending the image the next code
Upgrade ROM code error please try again.
Paphael will only boot in boatloaderscreen, befor ethat he give a message No image
who can help?
Click to expand...
Click to collapse
You could ask someone nicely to upload one they've edited and flashed succesfully and see if that works for you, have you got it working again yet or does it still go into the bootloader? If so grab an original Raph radio and flash that, it will load normally then.
B**** uu never gonna get it work unless have security unlock ....
as a sumup, three things to watch out for if you want to make a diamond radio nbh to flash on a touchpro...
- be security unlocked (not needed if you just want to flash radio signed for touchpro, i.e. not taken from diamond rom)
- in nbh tool, RAPH***** as modelid
- in nbh tool, 0x301 for radio nbh type, not 0x300
cmonex said:
as a sumup, three things to watch out for if you want to make a diamond radio nbh to flash on a touchpro...
- in nbh tool, RAPH***** as modelid
- in nbh tool, 0x301 for radio nbh type, not 0x300
Click to expand...
Click to collapse
I think this is the problem, wil try again. where must i put the 0x301 code?
Yep i flashed an original Raph so it works for now but i am not charmed off the Raph radio's.
Before i had a Diamonddevice that was much better.
I've got a bit of a problem with the SD Flash Method, and I prefer to ask here, that creating a new topic.
OK, I'm trying to flash a Raphael ROM, so need to change anything in HEX Editor, I name the .NBH file RAPHIMG.NBH and put it on the SD card (a standard microSD 2GB Kingston, formated with StorageTools as FAT32 512 bytes sector (/fs:FAT32/a:512))I put the RAPHIMG.NBH on the SD card useing a card reader and go in Bootloader, and than it sais "No Image Found!".
sgsdebruijn said:
I think this is the problem, wil try again. where must i put the 0x301 code?
Yep i flashed an original Raph so it works for now but i am not charmed off the Raph radio's.
Before i had a Diamonddevice that was much better.
Click to expand...
Click to collapse
If you follow the steps in second post you don't need to put 0x301 code, cause HTCRomTool do it for you
Cheers
jcespi2005 said:
If you follow the steps in second post you don't need to put 0x301 code, cause HTCRomTool do it for you
Cheers
Click to expand...
Click to collapse
i did your trick and then it goes wrong
Hi,
who has diamond radio 1.00.25.05 translated to Raphael for me? i appreciate if yoy send me a downloadlink.
(the reach and battery cosumption is bad, raphael .28 is better then .32.)
sgsdebruijn said:
Hi,
who has diamond radio 1.00.25.05 translated to Raphael for me? i appreciate if yoy send me a downloadlink.
(the reach and battery cosumption is bad, raphael .28 is better then .32.)
Click to expand...
Click to collapse
Check the first post.
Information update [a few minutes ago]
1.00.25.05 and 1.00.25.16 added to the «repository». If anyone want other versions just provide me with a download link so i can download, change and upload it.
Cheers.
Free SIM Unlock for SGS2 by Odia. (ONLY for HW Version MP 1.200)
1. Root your phone.
2. Extract your nv_data.bin
3. Look at the file with an hex-editor and goto offset 0x181460 (Ultra Edit, HxD, Hex-Workshop etc)
4. Take the hashes from 0x18146e (20 bytes), 0x18148e, 0x1814ae, 0x1814ce, 0x1814ee
5. If the hash is 7D 3E 17 CF CD 81 6C AC D4 E0 25 FA A6 50 04 FD D1 7D 51 F8 ignore it since that is 00000000
6. Put the hash into the BF exe for example:-
ighashgpu.exe /h:EF63BF26E2382917D96850CCF9632458EE6E6C77 /t:sha1 /c:d /max:8 /min:8 /salt:0000000000000000
and wait for it to finish, do that for each hash which is not zeros, the Found password: [50681318] is the code.
7. Put unaccepted simcard in the phone and when it asks for the unlock code enter them in order
8. Job done, phone is now unlocked for free.
If you cannot find a block which looks like hashes @ 0x181460, then search for SSNV and add 5216, but from the files which I have seen the block appears to be fixed @ 0x181460.
If it will not accept the code which you believe to be correct, it means the attempts have been used up, so you need to use the MCK code to unfreeze your phone, note it will not request unfreeze code, just say network lock unsucessful even your code is valid. (MCK HASH is @ offset 0x180049)
Added an example for what you need to look for.
Mastercode
Dynamic located PERSO section, holds the mastercode (MCK / unfreeze), search for PERSO and look for a hash, can be multiple old sections, added screendump with an example.
MCK HASH is also in the SSNV section @ offset 0x180049
Direct Offsets
GT-I9100
NET 0x18146e -
SUB 0x18148e -
SP 0x1814ae -
CP 0x1814ce -
MCK 0x180049 -
GT-I9000
NET 0x18154b -
SUB 0x18155f -
SP 0x181573 -
CP 0x181587 -
MCK 0x1815af -
If this saved you a few quid, maybe you would like to buy me a beer
View attachment 602403
View attachment 602464
I could not have made this solution and proved my theory without the special help from pulser_g2 and Fall Guy.
I have been advised by pulser_g2 that Chainfire will make a software solution next week using this information.
(APK is here http://forum.xda-developers.com/showthread.php?t=1092451)
Im happy to test for you. Mine is locked, tried tmobile earlier today, and it required a code, im rooted so i can provide anything.
nintendolinky said:
Im happy to test for you. Mine is locked, tried tmobile earlier today, and it required a code, im rooted so i can provide anything.
Click to expand...
Click to collapse
Grab that file from the device and pop me a PM. I presume you know how to get ADB up and running?
OK. Sorta bad news. I can't see a way to retrieve the code itself from the file...
On another note, I DO notice that at address 0x181468, we see the semi-familiar pattern of FF 01 00 00 00 00 ...
On an unlocked phone, that was FF 00 00 00 00 00 (I checked earlier)
This fits in with the information at http://forum.xda-developers.com/showthread.php?t=761045, namely "Change any 0x01 to 0x00 (or 0x00 to 0x01 to lock for warranty)"
That suggests there is a possibility a free unlock could be gained by editing this file. But there would likely be consequences. As such I'm not going to recommend that, nor give instructions for it... If anyone chooses to, they do it 100% at their own risk, and should bear in mind that they NEED a backup of that and the corresponding md5sum first.
But I can't see an unlock code in plaintext
Anyway, that should be food for thought for someone who has a desire to mess about with their device. I won't be trying it for now, and I recommend you don't unless you know what to do to fix this, and are aware you are messing with stuff I don't know much about...
P
pulser_g2 said:
OK. Sorta bad news. I can't see a way to retrieve the code itself from the file...
On another note, I DO notice that at address 0x181468, we see the semi-familiar pattern of FF 01 00 00 00 00 ...
On an unlocked phone, that was FF 00 00 00 00 00 (I checked earlier)
This fits in with the information at http://forum.xda-developers.com/showthread.php?t=761045, namely "Change any 0x01 to 0x00 (or 0x00 to 0x01 to lock for warranty)"
That suggests there is a possibility a free unlock could be gained by editing this file. But there would likely be consequences. As such I'm not going to recommend that, nor give instructions for it... If anyone chooses to, they do it 100% at their own risk, and should bear in mind that they NEED a backup of that and the corresponding md5sum first.
But I can't see an unlock code in plaintext
Anyway, that should be food for thought for someone who has a desire to mess about with their device. I won't be trying it for now, and I recommend you don't unless you know what to do to fix this, and are aware you are messing with stuff I don't know much about...
P
Click to expand...
Click to collapse
Scared are we?
Pretty understandable tbh, I was kinda hoping it was as easy to unlock as the SGS but maybe there is still a way...let's hope so.
Just want to say, hex editing doesnt work. Doesn't detect sim and you get no signal, just put old file back and all works. Looks like we're gonna need another fix.
Quick question, can anyone who has an unlocked device please send me there nv_data.bin.
I want to see if there are any other differences that could be keeping it locked.
dh2311 said:
Just want to say, hex editing doesnt work. Doesn't detect sim and you get no signal, just put old file back and all works. Looks like we're gonna need another fix.
Quick question, can anyone who has an unlocked device please send me there nv_data.bin.
I want to see if there are any other differences that could be keeping it locked.
Click to expand...
Click to collapse
I diffed an unlocked and locked one, and there's a lot of differences at binary level
I would need to ask the guy whose unlocked nv_data I borrowed if he was OK with that, or see if someone else has one...
Also, I did think. Perhaps it "rejects" the file if the MD5 thing doesn't match. If it's a salted MD5, then it could check the md5 of the bin file salted against a "secret" string, and then compare to the contents of the md5sum file...
When I tried putting the old file back i used all the same commands, and it said there was no md5 sum. Which would be expected to be honest. But maybe it requires one. Ill try again this time leave the md5. Doubt it'll work, but its worth ago
EDIT: Faliure again!
Also as a note, cannot be anything to do with the md5 sum, just removed and it still works, so it cannot be checking values against it.
dh2311 said:
Also as a note, cannot be anything to do with the md5 sum, just removed and it still works, so it cannot be checking values against it.
Click to expand...
Click to collapse
OK. So it seems to be checking this file is "valid" somehow then...
pulser_g2 said:
OK. So it seems to be checking this file is "valid" somehow then...
Click to expand...
Click to collapse
is the file size identical? That's a usual standard check for validation.
risq said:
is the file size identical? That's a usual standard check for validation.
Click to expand...
Click to collapse
Should be. We are switching a bit from 0 to 1 - not adding anything
You can have my nv_data.bin if you want... my handset used to be locked to O2 but has been unlocked.
(and I've manually changed the ProductCode by editing nv_data.bin as well, not that that should make a difference)
Let me know, and I'll PM it to you
stuclark said:
You can have my nv_data.bin if you want... my handset used to be locked to O2 but has been unlocked.
(and I've manually changed the ProductCode by editing nv_data.bin as well, not that that should make a difference)
Let me know, and I'll PM it to you
Click to expand...
Click to collapse
Yeah it's worth a shot. Do you have your original file as well? This suggests you managed to edit it fine, and it still worked...
We have tried switching the flag for locked to 0x00, from 0x01, but it didn't work. Would be interesting to see the file though after using a code, to see if the flag is now at 0x00
Really what we might need is a BEFORE and AFTER from an unlock.
ie. anyone getting a code, could you get a dump of this file BEFORE the unlock, then enter the code, and then RE-dump to another file. Call them before and after perhaps? Then we can see what actually happened after the unlock - perhaps a checksum gets re-calculated, or a second "backup" bit was flipped that we missed?
My email, for anyone wanting to send their file (it's only 2 MB so goes fine as an attachment) is (the lines stop OCR gathering it for spam =D)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Email on its way
Something tells me it wont be as easy as on the previous Galaxy S. Remember, the Exynos sports an in die crypto engine.
stuclark said:
Email on its way
Click to expand...
Click to collapse
Will look at yours shortly
mathieulh said:
Something tells me it wont be as easy as on the previous Galaxy S. Remember, the Exynos sports an in die crypto engine.
Click to expand...
Click to collapse
Per http://forum.xda-developers.com/showpost.php?p=13526163&postcount=13 it is evidently possible to edit nv_data.bin and have the phone still work...
stuclark said:
Email on its way
Click to expand...
Click to collapse
any chance of emailing me the nv_data aswell?
mathieulh said:
Something tells me it wont be as easy as on the previous Galaxy S. Remember, the Exynos sports an in die crypto engine.
Click to expand...
Click to collapse
Hey Math,
there are I9103-devices with tegra2-chipsets out there. Not sure how different the firmware would be for those but I guess samsung had to find a way to make the one mechanism work for both sgs2-devices...