So I did the HardSPL when I redid the phone a couple of months ago and lately it hasn't been getting service and just stopped altogether. So I looked to see what radio version I had and it said none.
So I proceeded to update the radio but I did not do the HARDSPL again as I already did it before. Well as I went through the whole process it said there was an error and told me to remove the batter. I did all this and now it won't boot up its just at the ROM screen or whatever with the three different colors.
How do I get it to boot up so I can get it to activesync and reimage it? I'm stuck and it just won't boot so I don't know what to do. Thanks
Oh and I've tried all the steps in getting by the bootloader by disabling usb and all that and it still doesn't work
I had the exact same problem yesterday ... connect it to your USB cable, and flash it with a STANDARD ROM, ie one downloaded from your phone's provider's site.
ie. We get our TyTNs through a local HTC distributor called Leaf Wireless. I downloaded the AKU3 rom from their site, and ran it. Reflashed my TyTN to their original AKU3 ROM, and after that I could reflash with whatever I wanted to
How do I reflash if I can't get it to activsync with mycomputer or don't you need to with a standard rom flash?
So I tried to do it with an original ROM and it gets to 12% done and fails everytime. How do I get this to boot back up normally?
If you go to the wiki it tells you how to do a rom upgrade off an SD card. I would try that route and re flash a ROM and radio that you know works, then take it from there.
Is all in the wiki.
Good luck.
WB
Can you post a link to that wiki? I couldn't find the one you were referring to. Thanks
I have had the same issue and even though I still have gotten it to somewhat work I'm almost sure something is wrong and I will have to send it in for a warranty repair. Here are the steps I followed using the official 8525 rom download. http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
After that Windows worked fine but still no radio (no gsm error). I downloaded the new radio only file off of the forums which didn't seem to work. I took my phone into the att wireless store and the lady reset my sim, somehow the radio started showing up and working.
I literally spent all day on this yesterday and it is hell. If you have any questions let me know I can guide you through it.
Check your pm's
JaredYng said:
Can you post a link to that wiki? I couldn't find the one you were referring to. Thanks
Click to expand...
Click to collapse
Not sure how you couldn't find it. Anyway here you go>> http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Related
, I've been tryin to update my Mogul's ROM to the newest DCD ROM(3.2.6 i think) and I ran into some issues that I can't seem to find on the wiki. The first thing I did was upgrade the SPL using nueSPL-2.47 by putting onto a FAT32 Sd card(1gb). That worked out fine it looks like. When I go into the bootloader it says what it should.
So then I moved on to upgrading the radio ROM. For this I used Titan Radio ROM 3.42.50. Inside the RAR file it came in was TITAIMG.nbh. The wiki said thats what I need so I loaded that onto my Sd card and entered bootloader. It found it and asked me to press the power button and then did the update and said it was a sucess. From there... nothing happens. it stays at the gray screen. I figured I need to reset it myself so I pressed reset and now it hangs at the big yellow screen that says SPRINT and doesnt load into the OS.
The wiki says this is because I didn't load the right rom for my phone, but I'm almost positive this is the right radio for the mogul, no? I don't know what went wrong, so I'm at a complete loss.
Anyone have any ideas on how I'm messing this up?
you need to read this: http://forum.xda-developers.com/showthread.php?t=392133
your radio has to be matched with a compatible rom, since you're on radio 3.42.50, you need a gps/reva rom, any of the ones listed at the bottom.
you can flash a rom via microsd as well, but it wont load the stock os, which is what im assuming u are still on, with a newer radio.
good luck
donpedfodelruvo said:
The wiki says this is because I didn't load the right rom for my phone, but I'm almost positive this is the right radio for the mogul, no? I don't know what went wrong, so I'm at a complete loss.
Click to expand...
Click to collapse
You've mentioned installing an appropriate bootloader and radio for DCD's 3.2.6, but you have failed to state what OS ROM is loaded or if you did attempt to flash to 3.2.6.
Hmm.. Yeah I am still on the stock Os Rom. I didn't realize the newer radio would make it incompatible. I suppose the dumb mistakes are the easiest to make.
So now, I need to update the OS Rom and I should be fine. Only problem is... I can't figure out now how to update to dcd 3.2.6. I need to flash via the SD card but I can't find the .nbh file in the RUU directory. What else am I missing?
*edit* Figured all this out, see post below.
Okay... I spoke too soon, cause I'm not out of the woods yet. i upgraded the Rom and have it working on the phone. Cept', I guess my account is no longer tied to the phone anymore, cause I can't make calls or do anything related. Is the simple way to fix this just calling sprint up and just saying I want to switch my account over to this 'new' phone? I've done that plenty to switch back and forth between the two phones I own, but I'm wondering if there's something else wrong.
I did install the sprint carrier .cab, so I know that's not an issue.
donpedfodelruvo said:
Okay... I spoke too soon, cause I'm not out of the woods yet. i upgraded the Rom and have it working on the phone. Cept', I guess my account is no longer tied to the phone anymore, cause I can't make calls or do anything related. Is the simple way to fix this just calling sprint up and just saying I want to switch my account over to this 'new' phone? I've done that plenty to switch back and forth between the two phones I own, but I'm wondering if there's something else wrong.
I did install the sprint carrier .cab, so I know that's not an issue.
Click to expand...
Click to collapse
don't tell them you want to switch or anything... Just tell them you hard reset your phone and now your having this problem.
depending on the issue.. I know with verizon I either cant make calls (needs an Akey reset) or I cant get data (needs a DMU reset). I just call them and tell them I performed a hard reset because I had an issue and now I need (one of those things) reset. I'm sure it's the same for you.. this will happen when going from non GPS to GPS radio.
i usually flash the rom first then the radio both from sd. plus i dont think the card can be a sdhc
Hi there everyone.
I have just bought a new HTC Cingular 8525 but it is running windows mobile 5. I would like to upgrade but I cannot find any downloads or instructions on how to do so. I do not want to brick up my new phone. Does anybody know a download link to upgrade to the latest windows mobile version that will work on my phone. Its an american bought phone which is unlocked and I am using it in the UK on Three. It used to be locked to at&t and I am pretty sure much of the at&t rubbish is slowing my memory and speed of the unit. If I were to upgrade will the phone still be unlocked?
Rom version is 2.15.502.3
Rom date is 04/09/07
Radio version is 1.40.30.00
Protocol version is 32.73.7020.16H
Operating system is (build 15706.3.5.2)
I am all new to this and would appreciate any advice idiot proof I have flashed many PSPs and other things but nothing like this.
As I have just got the phone I am still trying to work out how to use it so I have no idea how to do a Hard or Soft reset and have no idea about the roms
Sorry to waste your time
Please help
Rob
You should read through the Hermes wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Make sure you install hardspl! If you install the "official" AT&T WM6 install hardspl again, your phone will stay unlocked, even with custom roms. If you flash one of the big storage roms, then go to try another, flash the "official" rom before flashing another custom rom.
Read the wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I would also suggest making sure your phone is "super cid" before flashing custom roms, you'll also be able to flash from an sd card if you are super cid.
Read a bunch before flashing any radio roms!!!
Read, read, and re-read before you flash, and you should be fine. They have made the process fairly straight forward, but you can never be too sure. I have never "bricked" my phone, and I jumped in with both feet!
Mustn't flash a lot then because if you did you will end up with a brick sometime... I've always been able to recover my Hermes but there is STILL the possibility it won't.... one day...
ultramag69 said:
Mustn't flash a lot then because if you did you will end up with a brick sometime... I've always been able to recover my Hermes but there is STILL the possibility it won't.... one day...
Click to expand...
Click to collapse
I guess I have been lucky, but I'm sure I haven't flashed as much as others on here. But, I tried to follow the wiki, and tried to learn from others mistakes before I made some of my own. So, I figure if I can flash my Hermes, others should be able to do the same. And I have read up on the issues for when you "brick it", just in case.
I flashed several roms from the beginning (when I got my hermes), and learned a bunch. Then found what I needed/wanted in a rom, and spent days and days and days reading through many threads to find ones that fit me. I actually tried not to flash too much, but that can be a hard temptation to overcome.
So, just trying to pass on what has worked for me, to avoid the hard resets and such.
I would like to attempt cooking my own rom, and have read through tons of info on it, and played with some kitchens. Still working on learning that stuff, it'll give you a good appreciation of what the chefs around here do.
Whenever i get to the update part of the software my htc turns itself off and disconnects?
I then get the error 260?
robiscool said:
Whenever i get to the update part of the software my htc turns itself off and disconnects?
I then get the error 260?
Click to expand...
Click to collapse
I haven't ran into that one, but I went to the top of the page, clicked search, and typed in "error 260" (without the quotes). And got this http://www.google.com/cse?cx=000825...r+260&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
hopefully one of those will help you....google is your friend
I found out that its because I'm running vista. I tried to view Mr. Vanx's guide but its no longer there at this link..
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
So I am a bit stuck as I tried to do the following on here..
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
With no avail. It wont even let me install the HARD-SPL as it just gets stuck in bootloader mode with the error 260.
I have no idea what to do now. This process needs to be simplified more
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
Now make sure your device is on and activesync (or for vista users the WMDC) is running on your PC
Click to expand...
Click to collapse
I don't have anything running vista.
I still got the same error
thanks for your help though!
Go to post 1160 on page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
It tells you how to Hard SPL your Hermes with the sd card method. It also gives you ALL the apps needed.
After you Hard SPL your phone you can use the sd card method to flash a new OS. Flashing a new OS though requires you to drop steps 5 & 6 (you don't need sspl.exe once you have Hard SPL). Just remember though that the bootloader won't recognize any sd card bigger than 2gb...
Cheers...
Thanks for that. Its just now I have a problem where my phone is stuck on the Tri-Colour screen
Did you format the sd card fat32 (they are default format FAT) and rename the .nbh file to "hermimg.nbh"?
Is the sd card 2Gb or less?
You're on bootloader, is your SPL 1.09 des? If yes then insert the sd card and reset.
Cheers...
it might be an issue with activesync
i read somewhere before that activesync 6.1 won't sync with WM6 on vista machines.
I had to downgrade mine to ActiveSync 6.0 to get mine working again.
just an idea that might work
I attempted to update my ppc after attempting to fix mms, and everything went wrong. I started this thread yesterday on ppcgeeks: http://forum.ppcgeeks.com/showthread.php?t=51416 & then http://forum.ppcgeeks.com/showthread.php?t=51461
I tried to update to vetvitos black pill rom, not realizing it was a gps rom, and now when I start my phone, it has a PPCGeeks and PPCKitchen splash screen. At the bottom it says "No Radio"
I have an Alltel 6800 flashed to cricket. I have been looking for the answer for almost 24 hours straight now, and have not found one.
From what I've been reading, this is what I think ive learned:
The only way to get these roms working is with the Olipro 2.4 SPL on my phone, but the only way to get the Hard SPL on my phone is through activesync, which can't be done if i can't get into my phone. I don't think my phone is bricked, but I don't know where to go from here.
I think I need to reflash the phone to the stock rom (i think its 1.4) but I can't find it anywhere.
Can someone please help me?
just reflash with any stock one ... go to htc's site and you can download them there... the new one stock ones for alltel have GPS enabled on the radio too ... just dont let the customizations run when flashing to stock then flash to the rom of ur choice
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't.
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
Click to expand...
Click to collapse
Sorry to hear your HD2 is not working right now Skellyyy. I am with T-Mobile so I am not familiar with O2 but do they not have an official ROM on their website? Do you have to download your official ROM from HTC? I tried to pull up the o2 website but for some reason it would not let me pull it up. I went to www.o2.co.uk/ and I got this error message.
Error 502 - Bad Request
The server could not resolve your request for uri: http://www.o2.co.uk/
Click to expand...
Click to collapse
The exe is how you run the update utility for that ROM too by the way. Well atleast it is if you are using a computer to flash it. You have to right click on it and click explore to find tbe RUU file.
Also seeing as you have the EU HD2 why not just download the official update from the T-Mobile website and try it?
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Skellyyy said:
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Click to expand...
Click to collapse
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
Skellyyy said:
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
Click to expand...
Click to collapse
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
Skellyyy said:
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Click to expand...
Click to collapse
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Click to expand...
Click to collapse
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
T-Macgnolia said:
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Click to expand...
Click to collapse
I've downloaded the RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship .zip
Let's hope it works.
samsamuel said:
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there. I can't seem to find a way to change it to a .zip or extract it. It's a basic .exe file.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
Click to expand...
Click to collapse
Yeah no, that happened me before and I was only had 2.08.0000 but I'm sure I have 2.08.HSPL now. As I've said, it's happened before, in which all I did was do a soft reset and that worked. Doesn't seem to work now though.
I'm pretty sure MAGLDR is wiped now anyway, as when I plug a USB in while off it doesn't boot up, but just goes to a red LED. Is this normal yeah?
Just tried flashing the ROM I mentioned... the little progress bar showed... then the phone rebooted. Now it's back to SPL.
I don't there's anything I can do now is there? :/
ok, hang on, do you have a tmous, or a regular hd2 from t mobile?
I have a EU Leo. I don't know where it's from as I bought it second hand. The guy said it was bought on o2 Ireland.
Hey SKellyyy not saying I don't beleive you but just do this to confirm you have a DU HD2. I know for positive I have a T-Mobile HD2 as I bought mine brand new from a T-Mobile store. On your HD2 touch Start/Settings/scroll down to About Phone/Hardware Information. This is what mine says.
CPU
Qualcomm (R) 8250B
Speed
1024 MHz
RAM size
576MB
Flash memory size
1024 MB
Data bus
32 bits
Storage size
686.99 MB
Display resolution
480x800
Colors
65536
Bluetooth version
2.1/2.1+EDR
Bluetooth address
38:xx:xx:xx:xx:xx
Compare yours and let us know.
if the send key is white its regular, green its tmous. yours will be regular, from o2.which is why none of those roms you tried worked. only ONLY o2 roms will work unless hspl is there, anmd as soon as you flash any stock rom using sd card, it will remove hspl and then teh flash will fail, but hspl is already gone.
so, to get..
a winmo rom
bootloader - hspl4 - 2.08.hspl (3.03.hspl if you want a 3.14 rom) - bootloader - radio (if needed to update, see the rom thread) - bootloader - flash rom
to prep for nand android
bootloader - hspl4 - 2.08.hspl - bootloader - radio - bootloader - magldr - magldr usb flasher - flash CWM
bootloader -
Lol dude I'm pretty positive as it only has 512MB ROM and it has no T-mo on top and the buttons are white.
I've already tried to flash HSPL again but that was using the second version of the software (can't remember the name) and it failed. It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Where will I get a stock o2 ROM as the HTC website says "this software isn't available for your device"?
Skellyyy said:
It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Click to expand...
Click to collapse
thats more likely the comp, not the phone. all usual things, reinstall activesync/wmdc, dont use 64bit os if you can help it, firewalls off, etc etc etc. easiest first test is use a different pc.
It was fine flashing CWM on Friday. Currently can't use a different PC, will get one later and try again.
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
hspl is different than flashing roms / cwm.
flashing and sync will work through any old usb port, rarely need to turn off firewalls, whereas hspl is realllly choosy. gotta be a usb socket directly on the motherboard, hates 64bit win, times out before the phone has rebooted if you start it from winmo running, isnt all that happy if you have changed teh usb drivers for that particular port, say for mtty, or android, (each usb port has its own drivers associated with it, thats why swapping usb ports if it fails is always the first step, try them all)
I've tried three different PC's. Two desktops and one laptop, all plugged in to motherboard USB'a but none of them are installing HSPL. They're all just going up and down on the progress bar. Should I try HSPL4? I'm using the HSPL3 program.
No computers are running 64bit btw.
Is there anywhere I can just get the o2 ROM and try flash it?
Yea go to HTC website, support, pick phone, downloads, change dropdown to rom upgrades, operator name is in the title. You can also find them in the official roms thread in rom development section, and elsewhere in various threads.
Keep gour head up!
Skellyyy said:
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
Click to expand...
Click to collapse
Sorry you are having so much trouble out of your HD2. The HD2 is a great device but they are quirky as hell. I sure you will get it fixed, keep your head up man. Oh and don't give up on the HD2 just yet cause just like King Authur's Excalibure, The HD2 is a thing of legend.
Excilcior
Yeah, I'm currently looking to get a new HD2. Decided.
It's just the bootloader doing my head in, found the official ROM I need, but it'll only flash from PC and it's stuck at 0%. I need it as a .nbh so I can install from SD card. Do you know how I can do that if the RUU I downloaded is a .exe?
If you got RUU in .exe file install WinRar right click on the RUU file and choose "open with WinRar" then extract the .nbh file
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo