X7500 Avatar in Windows Mobile Device Center - Advantage X7500, MDA Ameo ROM Development

I have a puzzle to solve. I have 2 Vista computers, both running vista Ultimate, both with WMDC 6.1. One of the machines shows the correct picture for my X7500, both in WMDC and in synccenter. The other one uses a generic picture, and apart from this also has difficulty connecting to the PDA.
I have searched the registry for the correct entries, and why this difference exists, but have not been able to find this out.
Does one of you maybe know where to seartch to resolve this issue, in other words, where are these avatar's In registry?, or in Windows? Help would be severely appreciated

I have the same problem

Related

Any MacUsers around?

Is there anyone who's using his XDA with a Mac Computer?I'm using mine with pocktmac(for synchronisation with Adressbook and iCall).But ow can I install software into my XDA from a mac?
Any suggestions??
Jay
Copy the cab file directly to the device and run it from there. AFAIK you can't install without a PC where there is no cab-file option. You might be able to get something working in Virtual PC, but hey, who knows
How is PocketMac? I'm considering switching, but considering I review Pocket PCs and as such need to install lots of programs / make heavy use of synchronization, I need to know just how competent this solution is. Damn Microsoft for not making a Mac / Linux ActiveSync!
Mac
Don't know yet.Sometimes it works and sometimes it doesn't.Most of the time it works fine...
It's a real drawback that you can't instaal from the computer....
I sync my XDA on my Mac (still os 9.2) with activsync through Virtual PC 6.0 and W98 and it works fine.

Has sync mechanism changed with 2k5?

Guys
Am on Buzz' 1.50i.64 and quite happy with the way the ROM is behaving. But am having trouble syncing Intelligolf & MS Money with the PC.
Does anyone know if the way sync is done with 2k5 is different from the way it was done so far? Cause that seems to be the only reason why the softwares should not sync.
Buzz, xdajojo, mamaich...any ideas?
HELP!!!
-Malhar
Yes the Sync Mechanism has changed a lot .. I say this cos i used to use synce to sync my pda to my linux system but after upgrading to win2k5 i am unable to do that at all. like the whole sync mechanism has changed also the USB reports more interfaces to the device than previously. Previously we just had the serial device through which we can communicate .. now we got 2 interfaces i think ..
Any clues on this .. I was thinking of asking for help on the synce ml too..

QTEK S200 G3 and WM6

I've read many posts, and also the upgrade guide, but I still cannot understand what ROM should I use.
I've found many comments on PDAViet, Cristal, ShadoW, etc., but I've not the competence (and the proper english language skill) to know what is the better choice.
I know that newbies are not well tolerate by experts, but I really need help.
1) What should i choose?
2) The upgrade guide is useful for any ROM?
Please any help is appreciated
look at the screenshots and choose the rom that you like best.. there is no best rom but there is a best rom for your needs and only you know whitch rom that is.
Yes I know.
Ok, can you tell me what ROM (of the Cristal or PDAViet type) is more stable and complete (in you opinion)?
sammis9 said:
Yes I know.
Ok, can you tell me what ROM (of the Cristal or PDAViet type) is more stable and complete (in you opinion)?
Click to expand...
Click to collapse
I can't tell because I only use my Prophet for cooking now but I tried Crystal 5.1 and shadow 1 and shadow Touch. and they are all good although there have been some problems reported on all of them.
But you can also try one of my roms
Ah, ignorance is a big problem. For me is very difficult to read (and understand) dozen of threads. Now I have WM5 and I need an advice to upgrade to WM6.
By the way, I will try to flash some random ROM.
I will follow the upgrade guide, it's right for all ROMs?
An when I flash a ROM, the content of my Qtek will be erased?
A little Help
Yes, you'll end up lossing all your data and aps, so choose your ROM carefully. I've installed Fantasic 2.04b and now Gullum's Touch Xb, since I coudn't fix the problems on wi fi and bluethoot on the Fantastic.
First thing you need is a WM5 Basic ROM, I've user PDAViet Temp on Step 1 (Prophet_PV_Temp.zip). Just follow the guide (the old one).
Choose "ROMUpdateUtility_NV_G3.exe" witch is included on this Step 1. Remember that is normal that the process lock itself on 80/85% porcent of success for 10 minutes, allow it to run a max of 30 minutes before attemp any rescue.
As soon as the PDA resets, it will ask you to tap on the screen to start using Windows 5. Instead, execute the BAT file on your Step 2 choosed ROM;
In "ProphetTouchXB.rar", the installer is "Upgrade_ROM.bat". This updater works for G3 and G4 phones as well.
You'll receive a DOS windows with some cannot locate file error, disregard those. This process is the longest time comsumer. When the bat file finish you'll see a "Press any Key...." message in DOS.
Now you need to hard reset your device, press the camera button and the Comm button and the soft reset with the pensil (all at the same time!).
Most likely, when WM6 stars you'll not be able to access Contacts, it will close itself, you'll nedd to "Clear Storage", Start|Settings|System|Clear Storage (On Touch Xb), must performed until you see some action, if nothing happens after you click the option, then it didn't execute.
After you do so, you'll need to soft reset, change regional settings, date, city on the weather forecast, and that's all
Be aware that Touch Xb do not include Windows Live Messenger, so you can install it on SD or use some modified X ROM. Also MS Voice Commander 1.6 needs some tricks to anounce incoming voice calls, and you gonna need some registry changes to improbe volume on that program.
Previous steps that are recomended:
*Detele Sincronization profile in Active Sync 4.5 (and install 4.5 version), all your contacs would remain in MS Outlook, make a copy of the documents.
*Sicronize in Visitting mode (cancel the sicnro option windows, witch ask you to choose what to sincro, Contacts, Calendar, etc.). You will only have the "Expore" option in Active Sync.
* Charge the battery on 100%
* Use a notebook whit full battery load, of a PC with a UPS.
Hope it helps-
Many thanks!
I've installed Crystal, it works, but the real problem is ActiveSync 4.5; it's a very buggy app.
1. First I've got the problem of 85010017 error, and after many attempts, syncronizing 10 contacts at time, it seems I've solved the problem
2. Then the rapimgr.exe has become to use 99% of CPU. No solutions.
3. Restarting the computer, activesync have lost my previous settings, and now I should re-sync all contacts!
I'm very tired: I've seen that there is a program Nokia Intellisync, that could replace activesync. Maybe I will test it.
sammis9 said:
Many thanks!
I've installed Crystal, it works, but the real problem is ActiveSync 4.5; it's a very buggy app.
1. First I've got the problem of 85010017 error, and after many attempts, syncronizing 10 contacts at time, it seems I've solved the problem
2. Then the rapimgr.exe has become to use 99% of CPU. No solutions.
3. Restarting the computer, activesync have lost my previous settings, and now I should re-sync all contacts!
I'm very tired: I've seen that there is a program Nokia Intellisync, that could replace activesync. Maybe I will test it.
Click to expand...
Click to collapse
Any help??? Sadly, Intellisync needs activesync to work. I've googled anywhere, without answers!
No help this time
Its strange, you shoun't have that problem, active sync 4.5 works flawesly for me, with Fantastic 2.04b and Touch Xb, are you sure you format the storage area?, it is supposed to happens after the hard reset, but in my case had to be done manually in both occasions.
Yes, I do it. I had this problem months before, with WM5 and activesync 4.5; then I read some discussion about it, and downgrade to activesync 4.3.
Now, with WM6, the 4.3 is not supported, so I have installed the 4.5, but it's impossibler to use it. 99% CPU used, 85010017 error on sync (I know they are two different/indipendents problems).
try uninstalling & installing back activesync & see if it helps
also do a proper hard reset after upgrading
congrats! you managed to upgrade your prophet!!!
I bet is a Windows problem...
Its a Windows or USB Problem.
Update BIOS
Reinstall Windows XP SP2, or some up to date Vista.
Reinstall Activesync
If none of this helps, check for a bargain motherboard, if you got a PC Chips, ECS, Asrock, Gigabyte, Aopen, Foxcomm, drop it in the trash container and buy some ASUS, or if you are in a budget, MSI.
wanwarlock said:
try uninstalling & installing back activesync & see if it helps
also do a proper hard reset after upgrading
congrats! you managed to upgrade your prophet!!!
Click to expand...
Click to collapse
I've done both things, but without results. It's a common problem for many users, as I've seen in several forums.
The 85010017 error seems to happen with AS 4.5 due to a 2 minuts limit in sync. If, in your first sync your data are many (contacts, calendar), then you can reach this time limit and you'll never be able to resolve it (4.3 had no time limit and works perfectly).
The "99% CPU" error may be related to some communication bug within handheld and PC, that generate an idle loop. I've tried also to change the connection from NIDS to serial, but I wasn't able to let it work.
http://forum.soft32.com/pda/consumes-99-CPU-ftopict77575.html
http://www.spawnrider.net/blogs/2007/10/26/active-sync-45-solution-au-probleme-rapimgr/
sammis9 said:
I've done both things, but without results. It's a common problem for many users, as I've seen in several forums.
The 85010017 error seems to happen with AS 4.5 due to a 2 minuts limit in sync. If, in your first sync your data are many (contacts, calendar), then you can reach this time limit and you'll never be able to resolve it (4.3 had no time limit and works perfectly).
The "99% CPU" error may be related to some communication bug within handheld and PC, that generate an idle loop. I've tried also to change the connection from NIDS to serial, but I wasn't able to let it work.
http://forum.soft32.com/pda/consumes-99-CPU-ftopict77575.html
http://www.spawnrider.net/blogs/2007/10/26/active-sync-45-solution-au-probleme-rapimgr/
Click to expand...
Click to collapse
I'm sure you're right, but... On the other hand, many (I think most) people are using AS 4.5 without any pain, even with big sync-files. So there should be something different on your PC.
Not really a helpfull solution, but it is a waste to spend your time on generalities if they aren't the cause of your problem. Anyway, good luck.
It's not my PC, as I have the same problem with 2 different PCs (acer aspire, macbook boot camp), one with xp home sp2 and another with xp pro sp2. And I cannot understand why AS 4.5 is full of errors and 4.3 no.
It's really bad if the only solution is to downgrade to WM5 to use AS 4.3...
sammis9 said:
It's not my PC, as I have the same problem with 2 different PCs (acer aspire, macbook boot camp), one with xp home sp2 and another with xp pro sp2. And I cannot understand why AS 4.5 is full of errors and 4.3 no.
Click to expand...
Click to collapse
As I said, I can't help you, but keep in mind that thousands of WM users are doing the job with AS 4.5 without any alteration. So, I don't want to offend... But I think you do something different. And if it's not the PC, then there might be something out of order with your PPC (hardware or any third-party software?) I asume you tried different USB-cables as well?
rondol1 said:
As I said, I can't help you, but keep in mind that thousands of WM users are doing the job with AS 4.5 without any alteration. So, I don't want to offend... But I think you do something different. And if it's not the PC, then there might be something out of order with your PPC (hardware or any third-party software?) I asume you tried different USB-cables as well?
Click to expand...
Click to collapse
I've used different USB cables. I know so much people have AS 4.5 working, but, as you can see by the links I've posted before, I'm not the only one with this kind of problem.
I think, simply, that if certain conditions happens, then you got those errors (also if you are not me...). The problem is to identify these conditions to resolve the problems. A third-party software? Maybe.
rondol1 said:
...any third-party software?
Click to expand...
Click to collapse
I've clean-installed xp pro sp2 on a new partition, no firewalls nor antivirus, no third-party software except for outlook 2007 and AS 4.5.
Always the same two problems.
sammis9 said:
I've clean-installed xp pro sp2 on a new partition, no firewalls nor antivirus, no third-party software except for outlook 2007 and AS 4.5.
Always the same two problems.
Click to expand...
Click to collapse
And on your PPC? Anything out-of-the-ordinairy installed?
If not, maybe you should try to sync with only a few contacts, appointments etc. At least you can find out if it has something to do with the file-size (I don't think it's related, but you never know). If you hadn't tried it on several PC's I would have bet that is was a hardware/BIOS issue.
I'm puzzled.
On my Qtek s200 there is a fresh install of crystal 5, that erased all. I've not downloaded any other program.
Maybe the problem is the file size (at least for the 85010017 error); for the CPU 99% error, I really don't know how to do.
Installing a demo of Intellisync, the 85010017 error is bypassed (because the AS syncronization is not used), but not the CPU error, because Intellisync needs however Activesync to works.

Help

Could anyone advise me, I have Vista on my laptop, I use Ms mobile device centre to sync my xda2 (works well enough), I would like to upgrade the xda2to WM6 from pc2003se, would I be ok using vista or should I use my lads xp laptop with activesync?
What pitfalls are there using vista?
Not too sure on the pitfallss but as you have access to a PC with XP on it best suggestion is to use it.

[HTC HD2][IPAQ R4100] Unable to install apps - Not sure where to get apps/games?

Hello all,
I have recently purchased a few HP Ipaq PDAs, I believe one is an R4000 and the other R4100 (Or H4000, can't recall) anyway they're running Windows Mobile 2003. I have also purchased a HTC HD2 running Windows Mobile 6.5.
I have got hold of loads of Pocket PC games but only maybe 1 in 20 will run on either of these devices. Normally I get an error of "Not a valid Pocket PC Application" or similar. I found an FTP site with various games/apps for download specifically listed as either "Pocket PC" or "WM2003" but again, only a small selection seem to work.
Am I missing something? Is there a better source I should go to (I appreciate none shall be named here but if someone could hint). I would have thought looking for WM2003 apps would be the ones I need for the IPAQs and Pocket PC apps should work on either but at least one of the devices.
Any help would be appreciated

Categories

Resources