Related
Hi, please help me! my wizard i updated to a wm6 rom, farias, but i decided to put the offical tmobUK rom on it...however once i tried my pc froze up and i had to reboot, the phone now sticks on the ipl splash screen, i can get the bootloader up, but i cant get the love rom to install while in bootloader, nor any other rom. please help me!
it is a G4 locked wizard with:
IPL: 2.21
SPL: 2.21
GSM: 02.19.11
OS 1.6.2.4
help would be most appreciated!
thanks
REtarded question: Do you have your storage card in while you are trying to flash?
ummmmmm...thinks...i believe i stupidly did this time, i didnt before tho... but its not in at the moment while i am trying to flash from bootloader
Take it out and try flashing again
yeah i have taken it out, and it says when i try to install the love rom "strumento di aggiornamento non valido" which im guessing is upgrade device not valid...
right would i be correct in saying that it would be possible to get it to work again if i could mix and match roms of the same ipl/spl to get it to boot again? if yes then any ideas what roms?
i am getting so confused...i swear my wizard was a g4, but just realised if its 2.21 then surely its g3...:S but i swear i remember looking at it before i flash farias wm6 rom and as i had to use shelltool as thats the only way it work i believed it was g4...:S
G4's end in 0001 .. so if ur phone was a g4 it would say 2.21.0001 ..
but would the ipl/spl not have been changed through any flashing or anything then?
it is extremely hard to brick a G3.. what I would do is try flashing it back to an official carrier rom.
ive tried installing RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe but it says "error 296 upgrade only the nbf file cannot be used for your pda phone. please get newer NBF file"
stupid...yeah somehow i believed iot was a g4 when i flashed it using shelltool as i couldnt get farias wm6 on normally, but guessing thats because it wasnt CID unlocked, so now i installed button 1.05 and unlocked my G3 (lol) and gonna install ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe so should take me back to an official ship from t mob running wm5 which i want atm...then as im writing this i realise this rom is US i believe...dammit! ill find my original rom that was on it or something as any g3 rom should work now i believe. thanks for your help
HTC Wizard SoftSPL (sSPL) For G4 Wizards
FAQ:
What is SoftSPL?
-SoftSPL is a patched SPL that will temporary unlock your CID (untill reboot).
-It will be copied to your device and loaded (BUT NOT FLASHED!), the device is tricked to believe it has SuperCID (More accuratly g_cKeyCardSecurityLevel will be 0 ).
Why Temporary?
-1st because of warranty, since there is no CID block written, warranty isn't void
-2nd with this tool it's not necesarry to have a permanently unlocked CID.
-3rd it's safe, it doesn't flash CID block or IPL/SPL by it's own, but choose your ROM you want to flash wisely!
Isn't shelltool the same?
-no shelltool will strip the rom, and then flash it with pdocwrite, where sSPL is a bootloader which says it has supercid, thus tricking the RomUpdateUtility.
But can I make it permanent?
-Yes it can make it semi permanent, with HardSPL (it's the same trick, but now a patched SPL is flashed to device).
What does Soft SPL change on my device?
-nothing, it's loaded into memory. Only the ROM you choose to flash with the RUU will change your device.
USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip
G4 Safe means:
-No IPL/SPL and no Extended ROM.
Many Thanks Go to:
Olipro: For patching the latest SPL
SAA044: For testing all the versions, and keeping his head cool when the first hardSPL killed his Wizard (beyond repair!), and for keeping on testing the new versions with his brand new Wizard!
Whiterat: For all his technical and moral support, without him it wouldn't have excisted.
Pof & Des: From whom I took the idea, and some of the scripts.
NB. This sSPL is not for G3, it will proceed with updating, but in the end OS will not be written, tested it with my own G3. Beware of the SPL/IPL (there is danger to flash G4 spl on your G3 due to the fact you are using a G4 sSPL, the RUU will probably think it's running from a G4 device!).
NB.2 If you want to mtty in stead of flashing a ROM, place mtty in the folder and rename it 2.exe
[EDIT:12-september 19:54] I updated the file for a confirmed working RC1 (v0.1) WITH the missing dll [/EDIT]
[edit] 23.09.07
Some people reported that enable rapi does not always work, if that is the case for you, you can try to replace the original enable-rapi with the one attached here.
[/edit]
Well Done Eqx and Well Done to everybody else involved.
I look forward to giving this a go.
This is great work.. I will try this first thing in the morning..
Many Thanks
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any room?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft room = new room without spl & ipl?
awaiting ur reply & thanks again for ur hard work
First of all many thanks for ur effort.
second-should i back to the love room befor flashing this room or i can flash directly from any ROM?
third - with shell tool if any problems happend i can back to love room and retry again. is it possible here also?
forth - is soft (safe?) ROM = new ROM without spl & ipl?
awaiting ur reply & thanks again for ur hard work
Click to expand...
Click to collapse
First, you're welcome.
2nd Please keep in mind you need IPL/SPL 2.xx.00001 for WM6 (use the latest officcial one from your provider)
3rd It's not different from an ordinary flash, you can go back to any ROM that is G4 safe.
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Thanks bro
thanks bro for ur quick reply & i will try it as soon as TNT5 release.(inshaa-allah)
it's sound pretty easy ... i'mma try it 2marow as well .
thanks for everything
where r u guys?
42 person's were downloded without any comments. your feedback is very important to other's.
yalla come on
[solution] G4 SoftSPL Flash any ROM to CID locked device
Thanks!! I wil post the results a soon as i flash a new ROM
Thanks!! It's 2:33 in the morning where I live and I just found this. Am trying now. Will report results.
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
My way
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
saa044 said:
For anyone interested i did it like this!!!!
1. Flashed back to latest origenal rom.
2. Copied the file into shelltool directory to verify the ipl/spl status. (Normally most roms here dont have ipl/spl in it, never hurts to check though.
3. Used wizard service tool to make sure the enable rapi command is installed on device.
4. Copied the desired nk.nbf file into softspl (root) folder.
5. Ran the main exe file without errors and had wm6 flashed successfully.
Click to expand...
Click to collapse
The only difference now is that there is a ROM folder now
hmmm
thomme said:
I tried it and it didn't work. But it was probaly my fault.
Would anyone be so friendly posting some G4 Save-Roms. I think a lot of us guys aren't sure wich are save and wich aren't.
Thank you
thomme
Click to expand...
Click to collapse
Most of the roms on this page should be G4 safe.
http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6
The ones I have tested up till now is the wrcx, TNT and SNE 3 ones. Try what I said in my previous post, that might also work for you. What error did you get by the way, a 620 errors that said it could not communicate with device?
the-equinoxe said:
The only difference now is that there is a ROM folder now
Click to expand...
Click to collapse
yup, that is nice.
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
the-equinoxe said:
4rd G4 safe means no IPL/SPL (Extended ROM hasn't been tested yet)
Click to expand...
Click to collapse
I have a CID Locked G4 and I can flash using RUU any ExtendedRom
contact me
dharvey4651 said:
I tried and it didn't work at all. I tried 3 times already from the time I downloaded the rar and still no success.
First time I tried it I had Titanium 2 installed and it was a no go even though the IPL/SPL were 2.26.0001
Then I tried twice using the official T-Mobile rom with IPL/SPL 2.26.0001 and followed the directions provided to a t and no success...
I am going to try once more tonight since it is 3:25am and then im giving up for the night.
Oh and I am trying to flash faria's rom. Think that might have something to do with it?
Click to expand...
Click to collapse
Contact me via msn at [email protected] I will try me best to help u, but eventually EquinoXe is the master here.
saa044 said:
Can you give us more detail to where you get the error and what it is? Also did you flash origenal rom with softspl or bootloader? Oh and if your device asks for permission to load the dll files it wont work.
Click to expand...
Click to collapse
Here is exactly what my device is doing:
I flash back to the official T-Mobile WM5 rom for the 2.26.0001 IPL/SPL adn then let customization finish and then try to softSpl but with no success. On my MDA, it asks me to confirm something and the screen never turns white like it is supposed to do.
I have tried this several ways and on 2 different roms.
I have tried flashing back to T-Mobile official but skip customization 2 times and use softSpl to flash faria's rom and it failed. I tried once after waiting untill customization is complete and installing faria's rom and it failed once again.
I also tried installing cert_SPCS.cab and installing enablerapi.cab prior to running softSpl 2 different times, once before customization and once after customization. both times failed. this time I was using Black Diamond 2.0 instead of faria's rom to see if it was just the rom.
Not once did I ever get the white screen and not once did it flash successfully using this method.(At least not for me)
i would like to downgrade to WM5 official ROM,
i got one from this link http://www.tm-phonedownloads.com/dow...mda_vario.html
but this is not safe for G4 device coz it bricked someonesfone in G4 forum..
where can i have a safe base ROM for my G4 device, the one that wont harm my IPL/SPL so that i could downgrade back to WM5...
thanks.
rizortiz
rizortiz said:
i would like to downgrade to WM5 official ROM,
i got one from this link http://www.tm-phonedownloads.com/dow...mda_vario.html
but this is not safe for G4 device coz it bricked someonesfone in G4 forum..
where can i have a safe base ROM for my G4 device, the one that wont harm my IPL/SPL so that i could downgrade back to WM5...
thanks.
rizortiz
Click to expand...
Click to collapse
If you had read carefully, you would have known that that rom didn't brick his device.
He HAD that ROM but then decided to flash an older ROM which didn't contain the G4 IPL/SPL, thus bricking his device by flashing G3 IPL/SPL.
another question..
the-equinoxe said:
If you had read carefully, you would have known that that rom didn't brick his device.
He HAD that ROM but then decided to flash an older ROM which didn't contain the G4 IPL/SPL, thus bricking his device by flashing G3 IPL/SPL.
Click to expand...
Click to collapse
but this was what he said before..
[QUOTE ]
Originally Posted by Krzycho_666
I had RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Shi p on board (the newest ROM from T-Mobile.co.uk).
I have got black sceen, power, bootloader, and hard reset doesn't works.... When I plug USB cable to my PC LEDs wont light... [/QUOTE]
you mean that official ROM from is safe to be flashed with my wizard?
is that official ROM wont change my IPL/SPL? does it only contain OS?
thanks.
rizortiz
Officiall ROM of your provider is safe to flash in normal way...
Fro example I have CID locked G4 MDA Vario from T-Mobile CZ so I can flash T-Mobile CZ ROM without any problems in a normal way (without SoftSPL, shelltools etc. - just normally).
In fact I do this before every flashing of a custom WM6 ROM
Mirek
@rizortiz:
he excactly said:
I had RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Shi p on board (the newest ROM from T-Mobile.co.uk).
I have got black sceen, power, bootloader, and hard reset doesn't works.... When I plug USB cable to my PC LEDs wont light...
I tried to flash RUU_Prodigy_1060204_105_11210_TMO_UK_Ship to unlock CID.... I used SoftSPL-V0.1 to make it. But there is one thing more... Whe I tried to use SoftSPL-V0.1 RUU didn't want to connect my phone... SO I've disconnected phone and restarted PC (screen was still white). Then RUU "saw" my phne and my phone seamed to be upgraded.... Instalation was complete and there was a bootloader on the screen with information about IPL/SPL - but IPL was different then SPL. IPL was 1.06 and SPL was 2.21.olip (that was ok... - am I right?? )... I tried to shot it down.... and.... my device don't want to startup!!!! IS there any rescue for my machine???
Click to expand...
Click to collapse
ahh, why am I even defending what I said..
BTW,
Why try flashing a stock ROM with sSPL?
you can flash an original stock rom to your cid-locked device without sSPL.
Sad but true, if you flash a G4 unsafe rom thats it, your device is bricked. Equinoxe made a perfect softspl in my opinion and if other users dont take the time to read what he says and bricks their device its on their head, not his.
okay..
so i thought it was the first ROM that he installed that bricked his device..
because hardreset, soft reset and bootloader not working anymore..
well anyway, do you mean to say it would be safe to flash
that ROM (the latest from t-mobile) to my t-mobile?
does it not contain IPL/SPL?
how will i check it so that it wont brick my device? thanks.
rizortiz
rizortiz said:
okay..
so i thought it was the first ROM that he installed that bricked his device..
because hardreset, soft reset and bootloader not working anymore..
well anyway, do you mean to say it would be safe to flash
that ROM (the latest from t-mobile) to my t-mobile?
does it not contain IPL/SPL?
how will i check it so that it wont brick my device? thanks.
rizortiz
Click to expand...
Click to collapse
you can use Typho5, http://www.savefile.com/files/1066484
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
Please tell us your ipl/spl first. Softspl is G4 only.
yeah...
saa044 said:
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
helloo..
i already did what u said..
i had these files..
80040000-OS.nb
92000000-Splash.nb
96000000-GSM.nb ----------> does it mean, it will change my radio version?
9b000000-Extension.nb
9d000000-HTC.nb
where is that IPL/SPL? how will i knw it wont change my IPL/SPL?
i already used sSPL with TNT 5.0, thanks to equinoxe tool for that..
i already have WM6 on my fone..
i just want to downgrade to WM5, i am afraid if these WM5 roms including wizard love rom contains new IPL/SPL that could brick my fone..
currently, i have IPL/SPL of 2.26.0001 so its a G4.
thanks.
rizortiz
Click to expand...
Click to collapse
Click to expand...
Click to collapse
rizortiz said:
saa044 said:
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
helloo..
i already did what u said..
i had these files..
80040000-OS.nb
92000000-Splash.nb
96000000-GSM.nb ----------> does it mean, it will change my radio version?
9b000000-Extension.nb
9d000000-HTC.nb
where is that IPL/SPL? how will i knw it wont change my IPL/SPL?
i already used sSPL with TNT 5.0, thanks to equinoxe tool for that..
i already have WM6 on my fone..
i just want to downgrade to WM5, i am afraid if these WM5 roms including wizard love rom contains new IPL/SPL that could brick my fone..
currently, i have IPL/SPL of 2.26.0001 so its a G4.
thanks.
rizortiz
Click to expand...
Click to collapse
Dude its hard to keep track when you are working "me" and discussing the same thing on this thred also Read my reply on the other thred. http://forum.xda-developers.com/showthread.php?p=1522298#post1522298 And also I would recommend downgrading to your official wm5 rom, if you know it is safe and have done it before.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
pls help me-- kjam
Hi ,I have a kjam which is dead now. I have bootloader in 3color and also detect usb but I couldent downgrade and uograde . pls direct me and interduce some linke which shows the suitable rom and the software which I can flashing my rom or doing best like hspl or sspl without activesynce connectivity.
kjam wizard g4 series ending with 0001
tnx olot
I am waiting for your early replay
kourosh
It's patched SPL 2.20
1. Run SSPL (SoftSPL) - http://forum.xda-developers.com/showthread.php?t=347348
2. Flash HardSPL for your DOC
Yes, really was not hard to patch.. glad it worked))) so, this disables CID and some other checks, so you can flash any custom rom
i have hard SPL/IPL 3.08 will ir work?
newbe here.
What does device root mean?
is it my prophet?
is root windows directory
Looks promissing.
So, as I understand, you don't have to "downgrade" your firmware everytime you want to try a new ROM?
This looks great.
You made our life much easier I think this should be a Sticky
for those of you who dosen't really know what this does.
follow the procedure (soft SPL then hard SPL) and you would never ever need any extra steps before upgrading to wm6.
EDIT: Okay I made it easier. I made a batch file to do the work. (Soft SPL then Hard SPL)
just run the Upgrade_SPL.bat from your PC. It will do the Soft and Hard SPL
Thanks Prislav for this great work
Test to patch a G4 prophet : ok
IPL and SPL version seem differents
IPL : 2.10.00
SPL : 2.G4.4PDA
Test to flash my proper ROM : ok for the moment.
Whaô, WM6 update with progress bar, Fantastic.
Reflexion :
Rom update launched from WindowsMobile synchronised with ActiveSync with patched RUU for Wizard.
My Prophet seems to be reconized by the RUU like a Wizard but upgrade work.
Finally :
Perfect job Prislav it work like a charm, our Prophet are now like other recents HTC devices. It rock : only 10minutes to flash a ROM with special SplashScreen
Now :
Flash just finished, all is ok Prislav, you are the BOSS
Question :
Do a patched RUU for Vista exist ?
Perfect for G4 Prophet...
Wooo! Done!
WOW!
I just tried this, and it's amazing! I tried flashing my Original ROM and it worked. Even the SPL was updated. The only thing that it didn't change was IPL. If you broke your phone and have warranty, this is THE easiest way to get the Vendor ROM back. I would even venture to say this is the best tool yet for Flash-a-holics. Thank you so much!
Sounds great, but what about warranty?
Do we lose it if we change hard spl?
worth to try....
This is really an evolution (or is it revolution? ).
lol this removed my spl 3.08,really amazing tool,thanks prislav,big thanks.
IS HardSPL necessary if CID Unlocked ???
I CID unlocked my G4 M600 with the known paid service.
So do i need to HardSPL my phone and why???
Please somebody explain...
as i think,if you have hardspl,you will never be able to brick your phone.correct me if i was wrong.
Can a G4 be bricked? I was under the impression that the G4 was unbrickable. All the bricks I've ever heard of were G3 devices. I mean one can get stuck at bootloader and the like, but I've always got my phone back. Even had a Wizard ROM on there, and even that didn't brick it (although that time I thought it was toast!)! Like zeroed said, it will help you get your SPL back if you have that problem, and I think it's just an amazing tool for flashing in general.
Panas78 said:
I CID unlocked my G4 M600 with the known paid service.
So do i need to HardSPL my phone and why???
Please somebody explain...
Click to expand...
Click to collapse
Anyone pleaassseee ?????
I just need to be totally shure about this.. If i run this hard spl thingy patch on my G4 prophet i do not need to downgrade to wm5 everytime i want to try a new wm6 rom, if i currently are using a wm6 rom ?
And how do you guys flash a wm6 rom with the RUU utility ? I haven't seen any WM6 rom yet using RUU..
Just a little confused, sorry!
You wont need upgrading to wm5 - i recommend that you never flash full roms to avoid spl reflashing after hard-spl. the best practice will be to use nb2nbf to generate nbfs for your os, splash and gsm separately
Wait a second. Why should we avoid SPL reflashing after HardSPL??? I already flashed back to my original SPL and re-flashed HardSPL without any problem. What is the danger of doing this?
i think we need a radio update or change it but i don't know how cuz i'm g4 and i think it's CID locked ( i appreciate if u tell me how to know locked or not) i updated the rom with soft spl but the radio i don't know what to do my radio now 02.25.11 and i'm having the cannot excute errors what to dooooo helppppp ?
..............................................
i just tried T-Mobile-UK_2.19.11_Radinly and it doesn't start the progress telling me not for u something like that i don't remember
is there is radio official from imate k-jam ?
All of the radio ROMs are official. You just need to download and simply flash one. Since you have a G4, it cannot be CID unlocked, but you can and should apply HardSPL to it so that you can flash more easily than SoftSPL.
ashasaur said:
All of the radio ROMs are official. You just need to download and simply flash one. Since you have a G4, it cannot be CID unlocked, but you can and should apply HardSPL to it so that you can flash more easily than SoftSPL.
Click to expand...
Click to collapse
i'm already flashing with soft spl i don't know how to flash with hard spl and i'm afraid form it so is there is a way to flash the radio with soft spl for g4 ??????
No. You need to apply HardSPL first, its a simple process. It doesnt "flash" anything really, it just "updates" the Wizards IPL/SPL to a semi-unlocked version...you needint worry, its been tested and has worked for years.
ashasaur said:
No. You need to apply HardSPL first, its a simple process. It doesnt "flash" anything really, it just "updates" the Wizards IPL/SPL to a semi-unlocked version...you needint worry, its been tested and has worked for years.
Click to expand...
Click to collapse
ty for ur support i just didn't want to hard spl for the radio it's a little issue but i'm really gratefull for u thanX
i just hope if there is anything except the hard spl
Nope, without HardSPL it is not possible...why dont you want to HardSPL it anyways?
it's just i liked the soft spl cuz the temporery thing the hard spl u know semi permenant and in the remove hard spl post it doesn't have the imate k-jam spl and ipl so i'm worried a little i thought today about the hard spl and i'm still reading to get it all in my mind to flash any rom (g4 safe) ofcourse with completly fredom that's it by the way my radio 02.25.11 and i want it 2.07.10 my old one or the 2.19.11 this one i want it it's recommended by users i'm very thankfull for u by the way
Well let me ask you this then, are you worried about not being able to remove the HardSPL because of warranty concerns? If so than I understand, but if not, there is really no reason to remove HardSPL after you apply it.
ashasaur said:
Well let me ask you this then, are you worried about not being able to remove the HardSPL because of warranty concerns? If so than I understand, but if not, there is really no reason to remove HardSPL after you apply it.
Click to expand...
Click to collapse
naaaah there is no warranty now i just afraid cuz of returning to an official rom
u know sometimes the update process fails and i need to go back to my wizard love or an official imate k-jam rom and i think that's get hard spl complicated and makes some problems am i right or what??? plz notice me
No, HardSPL makes no difference in flashing the Wizard LOVE or carrier ROMs, it in fact makes it easier...no need to put the device in bootloader mode to do it. I am telling you, HardSPL will make your life much easier as far as the Wizard is concerned.
ashasaur said:
No, HardSPL makes no difference in flashing the Wizard LOVE or carrier ROMs, it in fact makes it easier...no need to put the device in bootloader mode to do it. I am telling you, HardSPL will make your life much easier as far as the Wizard is concerned.
Click to expand...
Click to collapse
coool thx for ur help i'll sleep now and in like 8 hours i'll read about the hard spl to do it right thx for ur help alot
i wannted to mention that i think from reading that the soft spl and hard spl is the same but the soft spl every time i flash i have to use and i don't think that it is hard or boring so
tell me experts what will happen to my k-jam g4 if i did this
copy the nk.nbf from the RADIO rom and put it in the soft spl folder like we do in Regular Roms to flash it
the nk.nbf from the rom only has a gsm i checked no spl or ipl or extrom or os or splash nothin just gsm
so what will happen to my runing rom TNT 19209 pro
i wanna know if it will addition the gsm only or it will brick my Wizard