i've just installed vIII.
well, i have a problem, and it happens in almost all the roms i try, excluding pdaviet 4.0.0.6
at first time, tomtom and messenger works, but after a day or less they stop working, and i have this error message:"The file tom tom navigator" cannot be opened.Either it is not signed witth a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file."
both programs are stored in storage card, and i don't understant why it happens without any reason. my tomtom hasn't been installed, just coppied the folder to storage card and also coppied 3 files to windows folder, like i saw in tomtom readme file...with other rom it worked by this way...so please help
(i've already searched, but i didn't found anything relevant for the reason~why this happen.
i think it is caused by change pool, because this time i haven't changed it and both programs are working =S
strange...
I have the same problem
I have the same problem with all added software...
jspgresende said:
i think it is caused by change pool, because this time i haven't changed it and both programs are working =S
strange...
Click to expand...
Click to collapse
There are different versions of the PP-change tool. Make sure you use the right one for your ROM!
[email protected] said:
I have the same problem with all added software...
Click to expand...
Click to collapse
I think you better flash again, following the procedure step by step. Something seems to went wrong somewhere. Good Luck!
I'm getting the same problem that [email protected] is having.
I've reinstalled 3 times and it's not having it! Everything else works except 3rd party stuff.
Please guys, be specific.
As you can read in several threads, the PagePool Changer can cause such problems if you use the wrong version. It's also mentioned a few posts above. So give details if want a serious answer! What did you do after flashing, what 3rd party software did you try to install (no one installs ALL 3rd party software...) Did you change the PagePool or other system settings?
Related
Hi guys,
I decided to upgrade my phone the other night, for no other reason then I like to fiddle and see what I can do with things =). WM5 worked fine, but I wanted to check out what WM6 had to offer.
So I download the official upgrade from the HTC member area ( http://www.dopodasia.com/Dopod_Aus ) and install as directed.
Everything went great, and I am pretty happy with WM6.
But after the upgrade, trying to start the camera brings up a dialog box with the error message "Unable to start camera. Unable to initialize Camera". This occurs if I hit the shortcut or run the .exe from explorer.
I downloaded the camera software but trying to overwrite the installed files using activesync yeilds an "unable to overwrite because files are write-protected" error, and attempting to write-enable the files is disallowed (the file just reverts back to write-protected, frustratingly).
I've searched these forums and others, and I can't find any answers.
Any help will be greatly appreciated.
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
VivaErBetis said:
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
Click to expand...
Click to collapse
Thanks for the reply =)
Nope, im not restoring any backups or transferring anything else.
I have the same problem - no answer yet My original report:
http://forum.xda-developers.com/showthread.php?p=1393458#post1393458
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
sim
tigersim303 said:
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
Click to expand...
Click to collapse
Hrmm.. I haven't tried yet, still looking for some sort of workaround or a software solution.
I'll try another OS tomorrow and let you know how it goes.
I also have this error, but...
...occasionally, it works when I do the following:
- Cold boot the device (no soft reset)
- Start the camera, but the screen will display noise
- Close the camera
- Start it again
- Second time, it will operate as expected
But funny enough, this trick doesn't work all the time...
I have friends and collegues that also upgraded and they don't experience this problem at all...
Same thing here... I bought 4 att 8525 units at ebay. they already came with wm6 3.57 from cingular.
3 units are working with no problems, but the camera stopped working in one of the phones.
I've tried everything (I think) , soft reset, hard reset, rom upgrade/downgrade.
A little of history ... so maybe some guru out there figures out what the f.. is going on:
1) The camera used to work fine.
2) Suddenly it began to fail saving pictures to the SC (sandisk 2gb) . All the phones have the same card.
If you choose to save to main memory, it worked.
3) The same day, the message "unable to initialize camera" started to show everytime I tried to start the camera application (4.0).
4) I tought it may be a failure SC, so I removed the SC, reset the phone but nothing changed.
5) Incredibly.... after then phone been turned off for a while... when I turned it on, the camera worked. Took a few pics... and the same error again!
6) Soft reset, hard reset.... nothing...
7) Updated SPL, radio and Rom (schaps 3.57) and the camera did work again!!!!! (with the SC in) .... after a few hours (no applications or skin applied) the error came back.
8) repeated those steps..... but no luck this time....
9) removed sim, sc and repeat steps.... no luck...
10 ) now, it is not working.... I tried coolcamera... but it does not start... tried camera 4.11... nothing... I went through the registry comparing with the other phones... everything is correct.
11) now I am thinking it is hw problem... but how is it possible that it works from time to time??????
Well... I almost gave up looking for a solution.... any idea would be great!
(what is a cold reset? )
thanks
fabian
Good news!!...
I just downloaded this cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
I can't believe it.... it worked for 2 hours... I did nothing with the phone... when I got the phone to send a sms, I tried again the camera... and it did not work!!!!!
(((
this is really weird!!
Well... this seems more like a "blog" than a forum .
Yesterday night I try removing the battery for 15 minutes. Then I turned on the phone and the camera started working.
I was really pesimist about the time it will keep working well... so I took pictures , recorded video, store them into main memory, into SC .. I really messed up with the camera ... everything worked well... tryed also Coolcamera application and took picture at maximum resolution (1600x1200 I think) .. everything Ok.
The camera is still working today... I did soft reset and it is still working... I'm trying step by step every action... synchronize.. wi-fi... phone... sms.. mms.. etc etc...and the camera still working...
I wonder how long will this work.. and what the hell does taking away the battery ???? Does it clean something in the ram ?
Any answer???
fabain
damn
I was really hopeful of this cab...
installed it and nada...
trying the battery trick (again) with this new cab installed to see maybe well just maybe...
fingers crossed
tehMope
Hey ya all,
Did a ROM upgrade
Schaps Pro New Very excellent to state the least!
Did a re-store (double dump move!)
Used SK Tools to re-store old backup of entire system (that was the double dumb move not the using the the fantastic SK Tools app!
Camera worked as well as a 2pixel can, but now get "Unable to start Camera not enough storage is available blah blah
So I did a search found a cab to a Kaiser link to rabidshare and tried to download 6 in a couple of days NO go on that,
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
Rabidshare doesn't finish download most every time I try on PC or phone!
Can anyone provide another link to download form please please!
So I tried another cab on this forum ArtemisSDeng and no go with soft rest.
Took battery and micro card out, 15 minutes (what-ever) no go on that either. . .
Have
Storage FREE 32.96 MB
Programs free 27.81 MB
So NOW what can I do besides buy a new Tynt and not restore old system restore over a NEW ROM?
Much help please?
where are updated cameras anyway?
I am currently running version 3.0 build 25498 HTC Camera on my Wizard with WM6 (NBD v9.2) ROM. Where can I find updated camera files. I tried a ROM once that had version 3.3 on it and it seemed to work better but I haven't found any standalone copies of the camera programs.
Anyone?
Can I use this cab for my HTC TYTN II (Kaiser) or its ony for Artemis ?
Hope this helps,
The reason that my camera messed up after installing a new ROM, is that I re-stored my device with a whole system restore!
This covered over the new upgraded settings found in the NEW ROM with old settings/ configuration !
SO I reinstalled the OLD ATT ROM (yuk) and BINGO camera works as it did before the undated ROM!
Now I going to reinstall the NEW cooked ROM, without the restore system and just hand install all my 6 apps, so I don't mess up the updated camera settings!
Maybe next week hopefully!
Hope that helps someone, so they can run a cooked ROM without messing up their camera!
Later!
madefree, you can restore all the old setup of your phone with SPB Backup ver2. It has an upgrade rom mode that doesn't alter the os at all but puts things back as they were on your old os. Today screen how you like it, any apps you've installed(fully regged). The only thing I've found was that for some roms I had to re-install the .net framework 3.5 as it DOESN'T alter the OS files. Well worth the money..
Cheers...
Thanks much ultramag69 for that info on the v2, as I was doing a flash on LVSW Edition ROM in about 20 minutes, so maybe dnload SPB Backup v2 and give it a try!
I just wish Sktools did that same type install, since I already bought that app!
Again thanks!
fix camera not initailize error (maybe)
ok not sure this will help every body but it work for me --- i'm running schaps 4.31 same problem after upgrading my 8525 any ways after weeks of try with cab , software , downloads I went to the programs them self and found out that if I disabled the camera icon setting in schaps config then soft reboot it works every time ( the icon actually is still there on today screen) been 2 days no errors before fix -- soft reboot use cam once errors till I reboted again hope it helps repost your findings might just be a freak incident
I dont know what happened. I have installed a few things already but when i go to install now and click what im trying to install, it seems like its gonna start, but one second later it says "installation (app name) was unsuccessful". it doesnt matter what im installing.
i went to check out what programs i have in there. i went to the remove programs section (settings>system>remove programs) and it shows nothing is installed there. i know i have some of the apps working cause my LED light isnt blink, my touchflo is still working.
please help. thanks in advance for any replies.
chez_steph7 said:
I dont know what happened. I have installed a few things already but when i go to install now and click what im trying to install, it seems like its gonna start, but one second later it says "installation (app name) was unsuccessful". it doesnt matter what im installing.
i went to check out what programs i have in there. i went to the remove programs section (settings>system>remove programs) and it shows nothing is installed there. i know i have some of the apps working cause my LED light isnt blink, my touchflo is still working.
please help. thanks in advance for any replies.
Click to expand...
Click to collapse
If you have more than 50 programs installed it won't let you install any more. You can edit the registry to fix the remove programs entries. However, I had the same problem as you and I had to hard-reset.
chez_steph7 said:
I dont know what happened. I have installed a few things already but when i go to install now and click what im trying to install, it seems like its gonna start, but one second later it says "installation (app name) was unsuccessful". it doesnt matter what im installing.
i went to check out what programs i have in there. i went to the remove programs section (settings>system>remove programs) and it shows nothing is installed there. i know i have some of the apps working cause my LED light isnt blink, my touchflo is still working.
please help. thanks in advance for any replies.
Click to expand...
Click to collapse
I have seen several other reports that these symptoms are caused by touchflo.
bakntyme said:
I have seen several other reports that these symptoms are caused by touchflo.
Click to expand...
Click to collapse
I had that problem with touchflo.
I have this problem....no touchflo installed....
WTF....why 50 programs? where is the registry entry?
I installed another ROM...dcd168...now I can't install anything off the device...it won't even execute the install program...
WOW ... I'm really hosed up now
Hey guys,
Got an issue with my toggle switches on my today screen (wifi on/off, disconnect data, and flight mode). They were working just fine up until today, so I know that the issue occurred when I was messing with it today.
The error that I get when trying to use the switches says "The file 'JMLComm' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Today, i did three things, one that I'm almost positive had nothing to do with it was added morph gear and a Rom for SNES. The other two were adding Bandswitch (didn't work the way I wanted it to, so I removed it) and added Setup Dial Up Enable Disabler, which didn't cut off the data connection after the time I selected. so I deleted that also.
Any tips or suggestions? thank you
well, since no one can respond to that, how about this.where can I look up to see if that file is still on the phone our just got deleted.
JMLComm should be in the windows directory, a ROM file, so you will need to show all files, size on mine is 45k, attributes RM
There is also JMLTasks.exe, 74k, RM
Neither of them do anything when i try to run them. I believe they probably need command line parameters.
a quick google shows that jmlcomm is associated with enabling/disabling BT and WIFI (which makes sense)
yea, I saw that when I did a search, so im wondering what changed so I cant use my toggles.maybe if I were to reload the file on the phone it would fix it? or maybe theres something blocking it so I cant use it.im wondering how adding those two programs could have done that...
PedroEMT said:
yea, I saw that when I did a search, so im wondering what changed so I cant use my toggles.maybe if I were to reload the file on the phone it would fix it? or maybe theres something blocking it so I cant use it.im wondering how adding those two programs could have done that...
Click to expand...
Click to collapse
its a rom file, so it is not removeable. you acn copy over it, using some file managers (resco, total commander) or use a cab to instal a copy over it, but the file would still be there 'underneath' the one you add.
Id be more suspicious that its a bad install of cookies home tab (they are the toggles you mean, right?)
I'd probably go for a hard reset and reinstal, but thats me.
But would it take 2 weeks for something to happen? because CHT was the first thing i installed, and everything worked fine
oh no, it will be something that happened recently, but its often easier to start over than to backtrack. Plus rolling back the offending item wont necessarilly fix it.
dang.alright.thanks, and off topic, I know, but when I do a hard reset, what all on the phone was preloaded that will get deleted?
Sounds like one of the things you install used the same file as your problem program. So when it was in stall it over wrote it and when uninstalled it deleted it causing an issue. When you hard reset it will take the phone back to your last flash, what ever was installed on the rom by the cook will be there but anything you loaded after the flash will need to be restored
did you ever find a fix to this? my phone just started doing this!
*edit* If you're using CHT & this happened just reinstall.
xnifex said:
did you ever find a fix to this? my phone just started doing this!
Click to expand...
Click to collapse
I guess the development certificates / signing went out of date.
search after sdkcertsnew2015.cab to renew them.
GG
Good Morning everybody,
Yesterday i installed the darkstone android Froyo on my HTC HD2, it worked pretty fine.
I reboot the phone to finish the installation and everything was normal. I download apps on the market ... all's good.
But i realize taht i've got no ringstone, i plug the phone on the computer and put the "media file" in the SD card.
I reboot the mobile and try to launch CLRCAD and HARET but i got the followinf message "The file XXX cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found"
I tried :
to format my SD,
to put a new install of android,
to reboot my phone,
to read different thread about this problem,
to test different program like Security configuration manager ...
I think that the problem doesn't come from Android build (it worked 2 times before) but win mobile ?
Here's my conf :
2.08 HDSPL
radio 2.12.50.02_2
darkstone froyo 2.1
rom 1.66 483 0 (76641) FRE (Bouygues telecom)
I don't understand what i did it wrong, it pretty worked and after 2 reboots i can't launch android.
Please can someone help me ?
Thanks in advance for your reply
Mike
Same issue
Hi,
I'm having this same issue. I hope someone can help. It doesn't seem to be an issue with the SD card. Did somehow the registry got corrupted? Please help.
Registry restore did not fix issue
ConcernedGuy said:
Hi,
I'm having this same issue. I hope someone can help. It doesn't seem to be an issue with the SD card. Did somehow the registry got corrupted? Please help.
Click to expand...
Click to collapse
To test my theory that it was a registry issue, I restored the registry that I backed up before installing Android. It DID NOT fix the issue.
What does that mean? It seems that everything that comes with the WM ROM works fine. It only effects the applications that were installed and not OEM.
ConcernedGuy said:
To test my theory that it was a registry issue, I restored the registry that I backed up before installing Android. It DID NOT fix the issue.
What does that mean? It seems that everything that comes with the WM ROM works fine. It only effects the applications that were installed and not OEM.
Click to expand...
Click to collapse
I've now deleted my Android folder and the .folder and will see if that helps. I don't believe it will because I've removed the SD card and the programs I installed on the ROM still did not work. I'm hoping I don't need to do a hard reset. That would be a pain.
That only thing I did before having this issue was that I installed several games from the Android market place; final fantasy 6, angry birds, and a couple of others.
Had the exact same problem running FroyoStone Sense - V3.1. Couldn't even install SDKcerts. Tried everything & the only solution was a hard reset.
I remember having this issue since ICS and on multiple devices running different ROMs.
What gives? I know the solution is to clear out the Download history and it still works. Just annoying that I have to do that... Does Google know about this issue??
You can also try using a browser like Opera, that helps me. But yeah it really is annoying it also happens to me both on GB and ICS
Sent from my LG-P350 using xda premium
kl323 said:
I remember having this issue since ICS and on multiple devices running different ROMs.
What gives? I know the solution is to clear out the Download history and it still works. Just annoying that I have to do that... Does Google know about this issue??
Click to expand...
Click to collapse
To be able to download certain files, you must first have an application that can run the file. If you don't have the ablity to run the file it will refuse to download, giving the download unsuccessful message.
What you say may be true. But the files I download are definitely openable. Yet they still don't download successfully until after multiple attempts or clearing the cache.
Sent from my Nexus 7 using Tapatalk 2
This may help, please help confirm
Hello everyone -- First post
I don't know if this will help, but i tell you what i experienced yesterday. I have both a HP Touchpad 32GB Wifi only and a Samsung Fascinate. I have the problem with both of them for months now. I can install anything i want from Google Play, but can not down load any other files, both from emails and websites. I can write to it with Window XP Pro machine.
Two days ago i was messing around with my Touchpad dual boot WebOS/CM7 and wreck it. Wouldn't reboot, couldn't run WebOS doctor on it or any thing. I thought it was bricked. Then i ran across a forum how to delete the volume manually and recreate them. Then install back to factory original.
Last night i got it back to 3.0.5 and installed CM9 tenderloin nightly 20121028 dual boot. First think i did was go to a website to down load a PDF file to see if this fix my download problem. File downloaded, i tried opening it, said no file associate. Jump into Google Market , installed reader, open the file, no problem. I started checking with ROM Manager for any nightly updates. There was one and i started downloading it, and moved on to installing Titanium Backup plus Root. Few minutes after dubbing around, checking CM9.I noticed that it had a download error. SO i jumped on to another website to download another file. Immediately <Untitled> Download Unsuccessful. Here we go again. Switch over to Google Market, Titanium Backup plus Root finished installing.
I remove it and root. Check to see if it fixed the problem. NOPE! still no downloading. This morning at work during break, I wiped CM9 out with ACMEUnistaller, and started over. Same install as before. No problem downloading any files so far, but i have not reinstalled Titanium Backup plus Root. I will install it tonight just to be sure and redo my Samsung Fascinate to see if i can reproduces the same results there with CM10.
Can someone else that is having the same problem confirm with their system and see if they get same result?
Not so
Sorry guys, I just reinstalled Titanium Backup plus and can not repeat it. I'll keep checking with everything that I install and any settings I change
You may have better luck with the Touchpad forum.
Other forum / thread
kl323 said:
You may have better luck with the Touchpad forum.
Click to expand...
Click to collapse
Its not just my touchpad that is having the same issue. My Samsung fascinate have the issue and it has CM10 nightly. I've search many forum site for this problem. There are many other that are having the issue with all different devices and ROM's. I
I'm currently trying to repeat on touchpad because if i mess this unit up it won't be a big deal for me. I have got it down 25 minutes or ever less removing the CM and reload it. Not so fast for me on the Samsung. So far unsuccessful repeating it. Going to try repairing Fascinate and on it.
You think this should be moved to another thread? If so please let me know.
Thanks in advance
FYI, if you change the name of the original Download folder to, say Download_old, then try the download again, it will create a new folder and download to that one. weirdly, the folder permissions are exactly the same for both folders after (rwxrwxr-x)