Phone voice too soft - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

HI all.. my phone is giving me abit of problems lately..
my voice into the phone is too soft. but this only happens when i'm talking through the phone. I don't have any problems if i'm using blue tooth, or voice recording. Only through the phone.
Anyone know how to fix it?

Did you get some dirt in to the microphone whole?

don't think so, voice recording works fine

Sylpheed said:
HI all.. my phone is giving me abit of problems lately..
my voice into the phone is too soft. but this only happens when i'm talking through the phone. I don't have any problems if i'm using blue tooth, or voice recording. Only through the phone.
Anyone know how to fix it?
Click to expand...
Click to collapse
hmmm.... if the hardware mic is free of debris, you might want to reflash a radio and see if that helps, might have become somewhat corrupted.

well i reflashed everything. It's working now.. but i lost alot of data my first reflash so i didn't backup everything, only some stuff.. now trying to rebuilt my tytn again.. sigh..
anyone got a guide to what data to backup? or how to backup?

spb backup
spb clone
sprite backup
sunnysoft backup manager
thats all i can think of right at this minute

Update
it's happening again. I just flashed my ROm to scap's latest 4.0 RC,
radio to anotehr newer version also. But after flashing scap's one for 2 days it happened again.
Only other thing i did in the middle was a restore using PIMBackup which was backedup few days ago (while i had the same problem)
i suspect that it could be something to do with my backup, but i'm not sure... anyone have any ideas?

update again..
i did this that i found from another thread.. seems to work for now
I made the following experiment
I changed the value (default was 32)
HKLM/Software/HTC/StartupAnimation /Volumn
One time to 64 and I got the startup animation sound half volume and when the phone booted it was the same half volume as the startup animation
Then I made the value 16 and the volume of the startup animation and the phone after boot was twice louder than the value of 32
The phone starts with the volume that set for the startup animation and it changes volume after some time
put this key to value 0 (zero) and you have the phone boots at high normal audio level
Click to expand...
Click to collapse

thanks for the idea. seems that soft reset helped. "reseted" the sound back to normal
now i gotta figure out the cause of it..
i just rebuilt my thing, this time without putting any backup restore stuff yet.. it's already soft..
Guess i gotta check next time if this happens again, does soft reset fixes it. And hopefully find the root cause of this whole thing

Related

WM6 & WM6.1 Sound Problem.

hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
xborfi said:
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
Click to expand...
Click to collapse
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
dioxda2 said:
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
Click to expand...
Click to collapse
thanks for your attention. I am now downloading it and let you know the results. thanks
Kornad 3.1 faild
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
xborfi said:
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
Click to expand...
Click to collapse
I am currently using this 3.1, keypad tones working fine (do you mean this? ).... ( Mine is a G3)
1. Is your speaker works fine? ( like playing music...)
2. did you try a hard reset?
3. optional flash with the lazy tool,
4.
yes, I did all steps except 3. Ill upgrade with that and inform you the results.
BTW please press around 50+ time on keypad to here keypad tones. they suddenly stop! my device is G4. I know that G3 sre better than G4 in wm6&6.1
thanks
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
paul c said:
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
Click to expand...
Click to collapse
Thanks for sharing...
i'm having the same problems sometimes. it happens mainly after changing the volume via the up/down switch from off to vibrate or back to certain volume.
the solution is the same as in the first post is mentioned. go to sounds & notifications and there to incoming textmessage. play the ringtone. sometimes a second time doing that is necessary.
but as im testing many roms as well, it happens very often on wm6.1, not so often in wm6.
before i forget to mention, i own a G4 Xda Neo.
//edit: another problem i had once was after using Shadow Vista "My Edition"(wm6.1) from with the ring volume-tweak. during call i rised the volume a little bit and then suddenly my speaker stopped working. even a softreset hadnt solved that problem, then i switched often the volume and after MANY attemps i managed somehow to get it working again. i was kinda shocked
greets
guro
PS: somebody has also the problem when recieving messages and press a key to early that the orange flashled doesn't went off?
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
xborfi said:
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
Click to expand...
Click to collapse
Try a different WM6.1 ROM!
i tried lots of stuff to solve this issue...no luck at all, after flushing the stupid Thai rom, i lost the sound....still trying
well, I tried almost 90% of roms here. all wm 6.1 are having this bug . I found PDAviet 4.0.0.0.6 a bit better than other, the sound bug happens less in this rom how ever it is still there.
oh! i found this here!
http://forum.xda-developers.com/showthread.php?t=371926
it looks as if this problem is with all roms, I think there must be a way to fix it on this biggest forum. still searching and reading an trying roms!!
hey guys,
since I moved to wm6 I was getting this bug, specialy with the sms notification.
but there was one rom which I did'nt have this problem if I kept the default rigntones. it was "Prophet_S4V.19701.01_F".
i'm flashing Prophet_S4V.19213.01_C, hoping it is that good too. altough I had the micro based on the s4v.19213 and and it was driving me crazy with this bug, I couldn't make it ring...
looking forward to help.
cya
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
xborfi said:
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
Click to expand...
Click to collapse
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
dioxda2 said:
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
Click to expand...
Click to collapse
yes, i do hard reset by pressing comm + cam + soft > send button . each rom i try i first open key pad and press 30+ on it and i sadly see sound dissapear! it looks as if prophet is not compatible with wm6!
I am now back to the wm5 and eagerly waiting to see a solution or patch from the great developers here!
well. no fix yet pals?
i had some problem too and what I had to do is...
When ever I hold the pda, I will press the volume up button even in lock mode and if there's no any sound, that mean the sound already disappeared, I had to soft reset... I had this problem at least once in 2 days....
Hope there'll be a fix for this issue sooner...

FIXED: Answer button doesn't answer, data connection turns off after call

EDIT:
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
That post fixed my problem, as well as fixed the problem which the data connection turns off after a call.
Hey guys, sup?
I have a huge problem with my TELUS Touch Pro. Great phone, but just one problem...
Whenever somebody calls me, I can't answer the phone. The onscreen "Answer" button doesn't work, the Talk button doesn't work, pressing the Select button doesn't work...pressing the headphone button does, but sometimes my headphones are in my pocket, or sometimes they're not with me at all!
The only way I can answer them is by ignoring the call, and calling them back. It sucks big time.
Anybody have a solution? And no, I'm not hard-resetting my phone. It started doing this for my first call, so I'm pretty sure it's not my fault.
HEEAAALLLPPP!!!
Is this the stock ROM?
Do you have BT on and connected?
Mine started doing that yesterday. I did a hard reset and so far everythings back to normal. Still do not know what it was tho
I just had my TP replaced and the new one did the same thing, I did not notice until a few days later as I use a bluetooth headset and pushing the answer key on the headset worked. I had to RTN the device to make it work properly. Have not had a problem since. it has been aabout a week and a half.
Sometimes I've noticed this happens when my memory is tied up elsewhere, ie media player or something. Try soft resetting your phone every morning that might help clear it up.
I have had this happen with me on my Titan which I recently traded in for my Touch Pro, and also on my Touch Pro. I noticed it coincided with installing iGo8 GPS software on both. A hard reset was the only way I found to fix it. Uninstalling the software did not do the trick. I could be wrong about the software title I am blaming, but I have everything reloaded on my phone except that, and all is well. I do have a Slide To Answer incoming call screen now with the MightyRom 4.9.5 rom installed, maybe this is a work around, don't know for sure. If anyone else has more feedback, let me know. I would love to find a fix for it so I can use my GPS software.
Mine started doing this crap last night. I reinstalled the S2A cab and just let it go.
I am starting to think it might just be the telus network being a boatload of suck. Mine does it with the stock rom without any programs loaded from time to time. I am thinking it must be the tower failing to acknowledge that you want to answer the call, so the phone keeps ringing becuase it sees there is an incoming call but the tower ignores that you are trying to answer it. This is just my guess based on what I have read about CDMA, I wonder if any GSM users have the same issue.....
Do any of you have Advanced Configuration installed? This is what caused this problem for mine and my brother's TP. Uninstalling didn't fix it. Had to hard reset.
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
I can tell you that this will more than likely fix this for you. Mine was doing the same thing, applied this, done and shut! Good luck.
OMG OMG OMG thanks!!!! That also fixed the problem where it ended the data connection after the call.
Sorry I took so long, I THOUGHT I was subscribed to the thread...
Thanks again!

[HELP] Audio cuts out. No sound during phone calls.

So I recently just rooted my droid and I'm running the evileris firmware atm I'm really happy with everything except that my phone can no longer make phone calls. The sound during phone calls does not work and I think it may not work sometimes in the music player as well. It works when I plug in the headphones but when i take them out no sound.
Airplane mode and resetting do not fix this problem and the updates that I've tried flashing from [FIX] Audiofix. NEED TESTERS FOR NEW KERNEL in the Hero CDMA forum do not work either.
This phone worked fine before rooting and flashing and the problem is present on all the roms I've used. The update above simply hangs my phone at the bootscreen, no matter which one I use. (Maybe its written just for hero?)
Anyways I was hoping one of you guys could have a fix or maybe have also had this same problem? Thanks!
(from what I've read in the thread above it seems the issue is a bad kernel that hangs up or fails to reset so you have to do it manually, but resetting doesn't fix the issue for my. My problem is constant phone call audio loss)
UPDATE: I have done some more experimenting and it seems the only problem is from the in-cal speaker, because when I put speakerphone on it works fine. The problem lies with the front speaker (part that goes to your ear).
maybe your phone is broken?
I went back down to 1.5 root, works fine. Its an issue with 2.1 :/ So currently I have 2 nandroid backups, 1 of 1.5 and 1 of 2.1 so I'm just switching in between the two.
did you try....
Did you wipe before flashing? After flashing did you try *228 opt 1? This may help as it sorted my audio issues with another Rom.
im having this same problem and i have no clue why i have tried everything knows possible to fix this.
I wipe before each flash as well as each recovery haha. atm my setup is 2.1 evil eris for the weekends and 1.5root for the weekday when i actually need to make calls
*228 opt 1 did not work btw
I just make a new backup at the end of the week and recover to the other one, works like a dual-boot pc or a bootcamp mac. It works, but its getting kidna old I'd rather just have 2.1 for good haha.
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
brianwin33 said:
longtime lurker.....1st time poster....i just installed leak v2 (i was one of those that was too impatient to wait for root)...i had the same problem that everything worked fine except the phone had no in call sound. Went through all the setting and found that tty was set to full...i unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
yesss thank you this worked for me.
BrianWin33 said:
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
I'm having the same problem... During a phone call, I get no sound / can't hear the person I am calling from the "internal speakers" (i.e. the one you hold to your ear during a call). If I switch to external speakers (i.e. loudspeakers) I can hear the person I'm calling...
What is this "TTY" setting that fixed this problem for you? Where can I find it and uncheck it?

[Q] Atrix Touchscreen freeze in 2.3.4 build

Does anyone else experience this with the new leaked 2.3.4 HKTW build? Or is it just my Atrix?
Yeah I exp. It as well but I notice my screen becomes in responsive and so do the touch keys. Only the power button and volume rocker work.
I've only experienced this while on a phone call though to be honest. Like when I'm on hold and I'm.checking Facebook or I'm looking something up on the web while on a call. But I definitely think it's a bug in hktw build 2.3.4 cause I beverage had a problem before with it.
I tried looking through the forums and haven't seen any other complaints untilled this one so maybe its just a few of us. Can any one else confirm this or is there a fix some where?
Sent from my unlocked//rooted ATRIX
mine works fine...
Happens to mine all the time. Fixes itself after turning the screen off.
d3athsd00r said:
Happens to mine all the time. Fixes itself after turning the screen off.
Click to expand...
Click to collapse
when mine freezes even locking phone with the power button and waiting a few seconds to turn it back on doesn't help it still stays un-responsive at the lock screen. I'm actually noticing it happening more and more frequent. or I'm just multi tasking more and more frequent lol idk cant wait for a USA build as apposed to this HKTW build but hey i got to say its definitely pulling me through this month of waiting for it ;P
Mine happened a few times a few days ago...then once the day after, and not since. Been like 4 days now.
i've a cyanogen 7 in my wildfire, and start happens and i dont know why, i've this rom from 3 months and never heard such a thing, hope some one can help fix this.
I've have done a hard reset and nothing
Mine did that already in 2.2 , back then the fix was to lock and unlock the screen. That would always fix the issue, at least until next time. Now in 2.3.4, it still happens, but if I wait 15-20 seconds it usually fixes itself. Looks like Motorola applied some fixes but didn't fix the issue completely.
Bell ATRIX Gobstopper 2.3.4
well guys, i solve the problem for now....
solution:
1º make sure that you have a backup prior to the problem (original stock or other thing), if not you might have to install the room from set one.
2º retrieve you sd card, make a backup of some things that you dont want to lose (like pictures, ring tones, mp3 etc) and leave a folder with a backup that you have, next format sd card in fat32 and put the things that you save (note, dont do all the backup of sd card, like the folders with .com... and android folders etc)
3º go to clockworkmod recovery, by restarting to recovery, wipe all data, like the firs time you install the custom rom, now go to backup and restore and do restore to your backup.
4º Restart and voila, that works for me...i figure that was some app that might cause the problem,(thinking on ndrive 11) im going to test now, but it works.
cheers and post something that might help some one
Gingerbread Problem
I am the same problem everything was fine with Froyo once I updated to Gingerbread I had these issues. Also the droid and nexus folks are reporting those just google up gingerbread phone freeze. I have not found a fix yet. Thanks

Ramdom soft reboots when in call

I'm having issues with my calls ever since I changed my S3 configuration (ROM, kernel, apps, framework…).
On most of them, I get a soft reboot at the start or in the middle of the conversation.
I've tried changing the modem but there were no results.
How can I diagnose the problem?
Thanks.
P.D: You can see my config on my signature
It just happened again. I have read the logs but I can't figure out the problem.
Any help?
Thanks.
eXtremeDevil said:
It just happened again. I have read the logs but I can't figure out the problem.
Any help?
Thanks.
Click to expand...
Click to collapse
If you have overclocked then lower the frequency I had the same issue on another device and doing so resolved it
We'll see if that's the issue. Thanks for the tip, I'll keep you guys informed.
Have you tried changing kernels, it happened to me once from a custom kernel
Well, I'm very happy with my kernel, but if the problem persist I will consider it.
Thanks!
The problem persists. May be that I installed BusyBox from Play Store when I had it already from the ROM & Kernel?
Yeah most likely thats the problem, try flashing your rom again
Sent from my SM-G900F using XDA Free mobile app
I have uninstalled BusyBox, reflashed the ROM and changed the kernel. I'll keep you guys informed.
So far so good, the system was even better (a lot more stable) and no call reboots. But just now I've had the first one. I guess the number of call reboots have decreased (I'm not sure because it is a ramdom thing) and that's good but, again, any way of diagnose the problem?
Thanks!
EDIT
I often lose my APN settings and I had to reboot the device (a soft reboot is valid as well), may that problem be linked to the other?
I've performed a full wipe and started all over again. Let's see if this time everything works well...
Unbelievable. I did every single thing from scratch and the phone was perfect. Today I make my first call after all the mess and configuration and AGAIN, a soft reboot.
I'm 100% out of ideas here. Is there something, ANYTHING I can do to confront the problem? Some kind of log or monitoring action so I can know a litte bit more about this??
Please, I'm REALLY desperate right now…
I've installed the app SIM Card Manager and the phone field was unkwown. I rebooted and my phone showed up correctly. Maybe the app's fault or my SIM is half-broken? Or is it the phone lector?
Tomorrow I'm changing my SIM for a new one and let's see what happens, really out of ideas right now...
I think I found the cause of the problem.
This modification along with the Xposed app StatusbarVolume seems to cause the reboot when I try to change the volume when in a call.
I can't be 100% sure this is the faliure scenario because the bug is a little bit random, but I am 99% sure anyway.
EDIT
Not sure if the cause is the volume unlink, or the Statusbarvolume overlay failing to show up in call if it has never been invoked outside of a call before since the phone startup. May be a mix of the two things.

Categories

Resources