Hi,
Is there anything like a converter or something that I can connect my headphones to my phone ? I'm not talking about bluetooth, I mean a cable connection to a typical headphone or to a regular speaker
Thanks
http://forum.xda-developers.com/showthread.php?t=280439
Got mine from eBay, works fine for a few bucks plus time to ship. Radioshack may have an adapter as well.
thanks guys
I found one on ebay, it seems useful. I'm going to try that I think. It's cheaper and seems like more comfortable.
I picked up the 3 in 1 adapter, which lets me plug in headphones a car charger and still use my mic from my headset.
Sounds like useless adapter, however
I plug the stereo output of the adapter into the line input of my car stereo, the OEM headset mic gets clipped to my seatbelt and the car charger gets plugged in.
Turns my Tytn into a mobil office and car theater system. I get to hear the audio from calls going through the 6.1 speakers in my car as well as play all my MP3's and videos through the phone.
The adapter was only about 15 bucks IIRC.
Related
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Finally I've made a move. TyTN X Sony Crossover Custom Headphones.
I've used a solder to remove the original earbuds wire and soldered a pair of cut SONY MDR-EX71SL headphones on. They sound 100 times better than the stock ones. This will ease my frustrations for now. I was tempted to solder my MDR-EX90LP on but they are $100 a pair. Too much for now
Later on I will try to rework the stock mini USB headphone and make a 2.5mm connector for it so I can use all kinds of headphones(with mic) and connect to a speaker system as I want!
EDIT: It appears that the original mini USB headset has 6 wires, 4 should be for the headphones and the remaining 2 for the mic, I can simply cut up the wire right after the mini USB port and connect the 6 wires to a standard cell phone headset 2.5mm connector then I should be able to connect the TyTN to all kinds of headsets![/img]
Arent you essentially doin this? http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html as seen in another post, seems like the most universal way to solve the problem.
I do like the way you built a set without a plug, cleaner..less cord and weight, but I know myself, I go through a pair of headphones about every 2 months on my mp3 player, Id hate to have to redo the soldering everytime, I expect with the headphones being such an issue for most peple that the market will be flodded in a month or so with headphones for the tytn, or atleast adapters, shoot, the one guy in the above url even offered to do it for free, as long as you bought the plug.
is there still no adaptor available to buy?
i just do this way........
can swap any earpiece....
crash74 said:
i just do this way........
can swap any earpiece....
Click to expand...
Click to collapse
@crash74
Looks very good, even more solid than the other solution, but how do you open the unit to reach the print, is their any trick?!
Can i also use the new connection as a line-out for little active stereo boxes, or is this to tricky for TyTn/boxes?
worked like a dream i have no more crapy hissing inbetween tracks and now i can play my song thu my hi-fi that 1 to the modders and 0 to htc
Adapter usb to 3.5 jack
Go to semsons.com, they have the adapter
qing84, I have the same headphones as u=) firstly I solve this problem like you, but I smash the small "black box"=) with mic and volume control, and i was need connect my mdr-ex71 directly to TyTN without "black box"=(
I was glad that i did it, because sound became much more louder, and more clean...
qing84 said:
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Click to expand...
Click to collapse
umm...you could have just bought this.... http://www.cellphoneshop.net/auadforci85.html
i think its a good idea to replace the head phone leaving the mic in workin condition.as there is no connector is still available at least in my town.i ll try it tomorrow.thanx dude
Does anyone know of a well built Hermes car kit that supplies power to the unit while also providing a connection to the stereo audio output so that it can be sent to the car audio system? I've been searching xda-dev, ebay and various online stores but unable to find something that does stereo audio.
This would be great for music in the car while not draining the battery.
Hi.
Yeah we have one here in Denmark. Look at this´one:
http://tele-online.dk/product.asp?product=15556&sub=68
maybe you should ask the dealer where he buys this and if theres a european distributor selling them
I'm not sure about the Dopod, however my att 8525 came with a usb y-cable so that it can charge and use the headphones at the same time....with a usb to 1/8th inch adapter you'd be streamin!...
pockePC techs HandsFree & Charging Adapter
I bought one off these and it works great. I use it in my MDX with a cassette audio adapter so the sound comes through the car speakers, the mic picks up perfect with no feedback. I use PPC tech for my adapter for my wizard, they definitely know what they are doing. Check them out.
HandsFree & Charging Adapter
Does this offer that ability to charge with a standard car charger? Do you plug you standard car charger into the female bin, while the other usb being plugged into the phone? And the 3.5 mm just accepts any audio device with 3.5 mm connector?
Hello,
From the searches I have done on here and other forums to include cell phone stores, I can't seem to find any information pertaining to USB headphones. Basically my question is: Are there any reasonably priced headphones that directly plug into the usb port (without any adapters or mini jacks as the plug)?
Thanks.
HTC headphones
http://store.wmexperts.com/htc-stereo-headset/11A29A1450.htm
For 15 bucks you get something from HTC that's workable until you find what you really want. Decent music quality. No adaptor needed.
It is funny you post this. I was just searching for some today and I purchased these.
If you search OEM Heaphones Fuze on eBay, you can find some for $10 shipped.
i have a sprint TP and DL the fuse FM radio app and it says that the phone uses the headphones as an antenna. mine does not work, you think with the fuse headphone it would??
USB Headphones - Not all work?
Are there different types of mini-USB headphones?
I just purchased a pair of Motorola "Stereo Headset with Enhanced Mini USB Connector" headphones that do not work when plugged into my fuze.
However, I went and found the old headphones from my Dash and plugged it in and it works.
Both have the phone/music switch.
Why would one work and other not? The shape of the of the jack on the old set just a little different that the Motorola's which look like a fat little "t" and is the same shape as all the connector wires and charging wires I am using. The shape of the jack on the old ones, however, does match the shape of the fuze jack.
Sorry if this is an obvious questions, but what am I missing? What do I need to look for when purchasing earphone/headset?
I have answered my own question. HTC is using a proprietary form of USB...extUSB. It combines audio and data, so you can use regular mini-USB for everything except audio. This bugs me. why do you take something that is supposed to be "universal" then make it proprietary. So now I gotta look for and buy special headphones.
bluetooth headset
I personally use the bt3030 bluetooth headset from jabra. Full stereo use any regular headphones you like. I use the stock ear buds works fine. These work for phone calls sprint nav as well as full stereo from mp3's basically any audio can be funnelled into these. cost around 80 bucks.
arsmithsr said:
I personally use the bt3030 bluetooth headset from jabra. Full stereo use any regular headphones you like. I use the stock ear buds works fine. These work for phone calls sprint nav as well as full stereo from mp3's basically any audio can be funnelled into these. cost around 80 bucks.
Click to expand...
Click to collapse
You can get the 3030's from newegg for 40 shipped in bulk packaging. Work great and no need to plug them into the phone since they are bluetooth. Give you the ability to answer phone, have remote, and listen to music. I love them. Got some skull candy headphones for 10 bucks from marshalls to replace the stock headphones they came with. Check them out
Headphones
Anyone found any USB headphones that have equal cord length on both sides? I really hate the uneven setup..always seems to pull one or the other out...... Thanks !!
I've got a USB charging cradle in my car which works fine.
I use a 3.5mm cable to connect my mp3 player to the car stereo which works fine.
I tried playing music from my HD to the stereo whilst charging and I get awful white noise and a constant pinging noise. If I take the phone off the charger it works fine. I can't find anything in the wiki or forums and I've seen some people on other forums with the same problem.
Anyone know what is wrong with this setup or I need a different spec cable (I guess its a standard stereo 3.5mm cable, so 3 contacts and I think the HTC one has 4 coz of the mic, but it works fine when I stop charging it. I guess it could also be a problem with the pins on the USB charger, but I thought the HD didn't have the extUSB connection.
I'm off to the USA on Sunday with a hire car so it would be really handy to be able to charge and play music!
I purchased the official Atrix car dock about a month ago before going on vacation. The dock has worked great and was indispensable for using the navigation in our rental car.
But the audio connection on the USB power cable has never worked for providing any audio from the device. My Bluetooth was disabled, but no audio (of any kind - music, calls, etc) has ever come out of the line out/headphone connection on the car dock cable. The only way I can get audio to the car is by connecting the cable to the headphone jack on the phone itself.
I've done a lot of searches for people who have had this issue, and the one or two instances I found have not provided me a solution.
I recently remembered that the multimedia dock I purchased also has a headphone jack on it, so I tried to see if this output works the way it's supposed to. I started playing music through the internal speaker, then connected some headphones to the output jack on the dock. The music immediately stopped coming out of the internal speaker and was audible on the headphones. Disconnecting the headphones sent the audio back to the internal speaker.
So it seems that the USB audio on the phone works and can re-direct audio to the dock audio jack when it's available. But the car dock audio jack still does not function. Do I have a bad car dock? Should I send it back, or is there something else I should try?
Sounds to me, like either your dock or cable coming out of dock is no good. My car dock throws audio out of connection on usb plug with no issue.
Sent from my MB860 using XDA App
I returned the old cradle and cable to Motorola. The new replacement has arrived, and the audio is working perfectly. Thanks for the help.