Related
hi everyone
ok mystery is salved install this cab to phone (if you have a Touch rom)
How to activate the Cube
Simple do a slide from top toolbar (on the bar) down to the buttom toolbar
Tested on Prophet, Artemis, Charmer, Wizard, Herald and works ... later reports show it works with all HTC devices that have the Cube installed
Code:
[ATTACH]47452._xfImport[/ATTACH][COLOR="Red"]<-- this is the cab[/COLOR]
the regestri setting that are needet might need some fintuning from device to device
Code:
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"UpLength"=dword:2800
"FingerPressure"=dword:2000
"EnableScroll"=dword:1
"EnableSound"=dword:1
"EnableCube"=dword:1
"SpeedHigh"=dword:20
"SpeedLow"=dword:50
"PanType"=dword:1
"PageHigh"=dword:10
"PageLow"=dword:4
"DownLength"=dword:412
"Boundry"=dword:0
"DelayDiff"=dword:40
"1stSample"=dword:12
"2ndSample"=dword:30
I've updated the cab and now it's right
if you try it and it works post and say what device you have
you think you can post the link for the download?
Buttons Free
YES please can you send link...thank you
button free no visible
how to install or put the icon at the center in bottom because I installed it but the icon is not posted yet
that icon is just to show where to press and it's not suposed to be any icon
just press and slid down
works on t-mobile wing
just in case some of the t-mobile wing were interested i can confirm that it works but the icon is invisible
EDIT: the only problem i have is whenever i try to scroll down in mi list the cube pops up
kinhdole said:
just in case some of the t-mobile wing were interested i can confirm that it works but the icon is invisible
EDIT: the only problem i have is whenever i try to scroll down in mi list the cube pops up
Click to expand...
Click to collapse
thats good to know it works then it's just some fintuning that needs to be done on t-mobile wing
I'll just post the reg setting that make tish work so rom cookers can finetun setting for the differant devices
After reading above post might try tinkering tomorrow?
Tried in wizard every other time I touched screen the cube appeared? good idea though keep up the good work. Thanks.
Is it possible to post the exported reg file(s) of your device?
I added a new cab to first post that is right now it works as it should
so it want be activated by tuching the screen in other places then the slide down where its supose to be
This is actually Touch Cube, not Touch FLO. Nevertheless, good job man
please
Boundry"=dword:4b4 ? impossible..
lepsyfou said:
Boundry"=dword:4b4 ? impossible..
Click to expand...
Click to collapse
that the same as 1204 as desimal 4b4 is hex
just install then new cab file from first post it was wrong setting but I changed it
thanks
merci mister it 's good
There's a touch ROM for other PPCs? Do the features perchance work with WM2003SE? Maybe someone could port the necissary .dll files, etc, to this OS if not?
jackbnymbl said:
There's a touch ROM for other PPCs? Do the features perchance work with WM2003SE? Maybe someone could port the necissary .dll files, etc, to this OS if not?
Click to expand...
Click to collapse
There are several Touch roms for almost all HTC devices
but you'll need to upgrade to WM6 well thats done when flashing the rom
i have the black majik rom on my tytn does this touchflo work on it?
marktang said:
i have the black majik rom on my tytn does this touchflo work on it?
Click to expand...
Click to collapse
if it has the Cube this should work
Gullum u very funny guy...
tom_codon said:
Gullum u very funny guy...
Click to expand...
Click to collapse
why what ?
Hi all,
Can any one post the Phone Pad install cab?
Cloudyf's latest version (Prophet S4V.19701.01) doesn't came with it.
kopus said:
Hi all,
Can any one post the Phone Pad install cab?
Cloudyf's latest version (Prophet S4V.19701.01) doesn't came with it.
Click to expand...
Click to collapse
Do you mean the SIP phone pad?
I'll have to cab that up...
I don't really know the name but the Shadow versions had it and the Mysterious Rom had it also.
The Mysterious Rom Image has it there, although the newer versions had a different theme (black one).
kopus said:
I don't really know the name but the Shadow versions had it and the Mysterious Rom had it also.
The Mysterious Rom Image has it there, although the newer versions had a different theme (black one).
Click to expand...
Click to collapse
Umm... Was it touch styled (black and grey) or WM cheap plasticky feel? Also, was there a qwerty version?
For the touch styled version, look at this thread: http://forum.xda-developers.com/showthread.php?t=344533
You rule! That was exactly what I was looking for! Thanks
kopus said:
You rule! That was exactly what I was looking for! Thanks
Click to expand...
Click to collapse
No probs! There is also a Diamond version of it...
It worked well, it was what I was looking for... but the disable xT9 disables the HTC Touch Pad, the HTC Touch Keyboard always apears even when the pad option is selected.
Is there any known problem and solution for this?
kopus said:
It worked well, it was what I was looking for... but the disable xT9 disables the HTC Touch Pad, the HTC Touch Keyboard always apears even when the pad option is selected.
Is there any known problem and solution for this?
Click to expand...
Click to collapse
Not that I know of :S
I could do a bit of digging though...
kopus said:
It worked well, it was what I was looking for... but the disable xT9 disables the HTC Touch Pad, the HTC Touch Keyboard always apears even when the pad option is selected.
Is there any known problem and solution for this?
Click to expand...
Click to collapse
One question... What did you do to disable xT9? Did you go through the options, or edit some registry keys?
I edited the reg, added the changes that came in a reg file that was in the folder disable XT9 that came with the files. Simply run the reg file. I also tried a cab that I had from the shadow verison to disable the XT9 and the result was the same.
Hello,
I'm still using original WM5 ROM with the device.
but only one thing impacts me - I can not rotate the screen to landscape orienation, I need it for one application, which I use daily.
I've tried to rotate programmaticaly, but API call returns that rotation is not supported.
If someone has WM6.1 romon the device, can you tell me please:
Is screen rotation supported with WM6.1 rom?
Rgds.
amigo421 said:
Hello,
I'm still using original WM5 ROM with the device.
but only one thing impacts me - I can not rotate the screen to landscape orienation, I need it for one application, which I use daily.
I've tried to rotate programmaticaly, but API call returns that rotation is not supported.
If someone has WM6.1 romon the device, can you tell me please:
Is screen rotation supported with WM6.1 rom?
Rgds.
Click to expand...
Click to collapse
How can I test it?
here is a simple sample which has to detect this ability
http://msdn.microsoft.com/en-us/library/ms903593.aspx
I suppose there are applications which can do this, but I don't know about it
Rgds,
Ernst
amigo421 said:
here is a simple sample which has to detect this ability
http://msdn.microsoft.com/en-us/library/ms903593.aspx
I suppose there are applications which can do this, but I don't know about it
Rgds,
Ernst
Click to expand...
Click to collapse
Tried it with a little tool I created using the code you send. And it is not working (At least in the ZFree version). Maybe the dragonball version supports it, but I doubt it.
thank you very much for your attempt!
Found this on xda-china thought it'd be nice to share
ZTA4 2.8 + msjh.cab
I've uploaded them to megaupload:
http://www.megaupload.com/?d=U9UM9USX
***This keyboard is for PIN YIN only****
***Also Vibrate as you type****
can display both trad / simp chinese.
cheers for sharing....
did you test it on D2? what software is this? comparing this to CE Star, which is easier to use?
Yes I did.
I flashed it to udk's 6.5 rom
Works like a treat.
I prefer this solution over CE star - dont like progs running in the background
but bear in mind that this SIP inc. PinYin ONLY.(as this is the only 1 i use)
but if u need proper hand writing recognition / chang jie etc- you may be better off getting CEStar.
thanx for the quick reply ... I will try this and see whether this suits me
Every thing work fine with this cab, but a problem i encouter not until i try to make a call, where in the phone keypad is up, it doesn't show the chinese word.
Any idea?
The stock WWE_Asia ROM that came with my TD2 has zta4 built-in, and it's customized for TD2. Is the one you posted copied from the stock rom?
The only custom rom I see that has this is abusalza's X-Treme V2. Maybe there's other roms that has chinese support cooked in which I dunno of?
Atomickitten said:
The stock WWE_Asia ROM that came with my TD2 has zta4 built-in, and it's customized for TD2. Is the one you posted copied from the stock rom?
The only custom rom I see that has this is abusalza's X-Treme V2. Maybe there's other roms that has chinese support cooked in which I dunno of?
Click to expand...
Click to collapse
I've flashed WWE_AsIA rom as well and loved that ZTA4 input.
I believe it's the same
(there are 2 skins included in the package but i have only used 1 - which looks similar to what you've got on the WWE_ASIA rom)
do u mean the msjh.cab is the skin for zta4? there's a latest version of 2.0.6.0 from A4 forums, is the A4 package u posted the same?
Atomickitten said:
do u mean the msjh.cab is the skin for zta4? there's a latest version of 2.0.6.0 from A4 forums, is the A4 package u posted the same?
Click to expand...
Click to collapse
nononono sorry i should have made it clearer
msjh.cab - for viewing chinese ONLY
the ZtA4 one - for inputing chinese
The one from A4 forums is not a customised build.
mine is 2.8 (way higher than 2.0.6.0 ) and the one i posted also vibrates on typing.
if you've used WWE_asia rom - that's the keyboard that goes with it
ahh i see now, thanks for your hardwork ^^
shawchyn said:
Every thing work fine with this cab, but a problem i encouter not until i try to make a call, where in the phone keypad is up, it doesn't show the chinese word.
Any idea?
Click to expand...
Click to collapse
you mean you couldn't search for a chinese name in PHONE ?
or does it not displayed properly?
berlinberlin said:
you mean you couldn't search for a chinese name in PHONE ?
or does it not displayed properly?
Click to expand...
Click to collapse
Both in the phone pad.
When I press on the CALL, the phone keypad show, all the chinese word won't show up, as the result, not to mention search for it.
But it is working fine in sending sms and viewing the contact name.
Any ideas?
I got exactly the same problem with shawchyn. Everything could be fine with msjh.cab installed. But when phone keypad activated, chinese characters just show "[]" in stead. I beg a solution, please.
someone suggested installing subglobe.patch would solve the problem
berlinberlin said:
someone suggested installing subglobe.patch would solve the problem
Click to expand...
Click to collapse
I found that thread also, but no hope on the solution.
I tried those 2 files in udk's wm6.5 r1, seems like it's not working on manila, only works on wm interface.
EDIT: after a reset on installing a new radio version, words are showing. make a reset between hard and soft?
well same here
a soft reset pretty much solved it
but the keyboard is still pretty buggy to me so i m back to the default zta 4 2.0
i do not feel buggy, or i don't use it much. but it seems that it replace full qwerty keyboard with num keyboard in some appz.
berlinberlin said:
well same here
a soft reset pretty much solved it
but the keyboard is still pretty buggy to me so i m back to the default zta 4 2.0
Click to expand...
Click to collapse
Which font and input are you using? I still have display problems inside Manila
berlinberlin said:
nononono sorry i should have made it clearer
msjh.cab - for viewing chinese ONLY
the ZtA4 one - for inputing chinese
The one from A4 forums is not a customised build.
mine is 2.8 (way higher than 2.0.6.0 ) and the one i posted also vibrates on typing.
if you've used WWE_asia rom - that's the keyboard that goes with it
Click to expand...
Click to collapse
Thanks! This is what I was looking for. Got it to work nicely with Tom's WM6.5 ROM. Now I am HAPPY.
Can anyone refer me to a working wm 6.5 rom for the 20 key htc dual (Niki)
Didn't you see:
http://forum.xda-developers.com/showthread.php?t=500021
http://forum.xda-developers.com/showthread.php?t=502378
http://forum.xda-developers.com/showthread.php?t=497347
for some reason none of these work on my dual
I guess I should also add that I have the 20 key dual, if that helps my situation at all.
i have a Neon 200 aka The Telstra Model
i would like to see a wm 6.5 rom come out
where the slide keyboard works and the camera button
i can only wish
thanks guys
eurotuner said:
for some reason none of these work on my dual
Click to expand...
Click to collapse
What exactly didn't work?
win2k8man said:
i have a Neon 200 aka The Telstra Model
i would like to see a wm 6.5 rom come out
where the slide keyboard works and the camera button
i can only wish
thanks guys
Click to expand...
Click to collapse
WM6.5 for Neon200 --> http://forum.xda-developers.com/showthread.php?t=482269
The Keyboard did not work
win2k8man said:
The Keyboard did not work
Click to expand...
Click to collapse
Here is another one.
http://forum.xda-developers.com/showthread.php?t=518975
Maybe you can find some help if you read the Threads, i think if the keyboard isn't working, more people will have this problem.
Another posibility is to install the ezinput manualy...
eurotuner said:
Can anyone refer me to a working wm 6.5 rom for the 20 key htc dual (Niki)
Click to expand...
Click to collapse
I have quite a lot of users on the insomnia 6.5 ROM that have 20 keys and haven't had any feedback indicating that it isn't working.
I had issues with the 218xx builds and the keyboard, but it all appears to be resolved now with the 23001 version which I uploaded overnight.
http://forum.xda-developers.com/showthread.php?t=497347
Regards
DT