I have a Hermes 300, it was bought second handed, and had a problem of blocking the password for acessing the PDA sayng it was wrong all the time, even whem right...
I upgraded SPL to 2.10.Olipro and installed schap´s WM6 3.54 ROM, it all atays the same.
I have also a problem of GSM service. The PIN never shows up so I can´t connect to GSM service.
Can anyone please help me on this one?!
I´ve installed a new Radio Rom with Actuvesync and SSPL and sometimes it works on GSM sometimes it doesnt work....
Sometimes I have the No GSM sign too.
Related
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Hmmm... have you read the Sticky thread on bricks? This sounds like a problem I have seen in there. Probably easy to fix - first try flashing back to where you started. Read through the sticky - it will help you.
http://forum.xda-developers.com/showthread.php?t=286755
How long ago did you flash? Did it never work after flashing or did it work for a day, a week...? Need more info. I assume you verified that the SIM isn't the problem?
yes i have read the brick thread and have tried flashing it again but it didn't seem to work. i've also re-did the radio ROM as well.
I flashed and upgraded to wm6 after the network problem and it still doesn't seem to work.
I don't think it's the sim problem as it works with my other phone SE k800i. But i'll try changing the sim card and get a new one on monday.
I'm leaving the option of sending it to Teleplan as a last resort as it is quite a hassle to send the dopod all the way to sydney when i'm situated in Perth.
Anyone know a service center for dopod in Perth?
dopod 838pro
i'm not sure but when i use my optus sim card, it seems to work. but not with my 3 sim card.
louiedafly said:
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Click to expand...
Click to collapse
Try starting up your phone with no sim card and see what happens, I think have the same problem, I can't use any other radio than 1.16, and even that may have problems. If I use any other radio roms, I get no service, and if I take out my sim, it doesnt even realize that there is no sim, it says no service, and also the phone will freeze on the today screen with half the plugins loaded.
BTW what radio are you using?
I get the same error with my 3 sim and the .41 radio rom.
Hello all,
I Eb'd an HTC wizard (cingular 8125) running Wizard Love/NBD WM 6.
On the load screen I get:
AKU 2.3;
IPL and SPL:2.25.0001;
radio:2.25.11;
rom: 6.0.0.0.
My carrier is Tmobile.
Question 1: If my phone has this newer ROM and it takes calls on the Tmobile network it has been CID unlocked and SIM unlocked...right?
I wanna update my rom and think that I am competent enough to do so but there is alot to learn and this is not my full time gig...right.
Question 2: So, if I am correct in Q1 I should be able to flash roms right?
However when I attempt to do so the RUU gives me [error 224]. Active sync and or WMDC says its connected. (I installed the AS drivers in WMDC)
Question 3: Where do I go from here?
Question 4: The wi-fi is currently not working will a new rom potentially clear this up?
Thanks in advance for the time and advice..
grazie
hmmmm,
Well,did you updated to NBD wm6 yourself ? and how did you updated ? which method you adopted ? SoftSPL or HardSPL ?
You say its SIM unlocked as it takes calls on the Tmobile network .Did you SIM unlocked with lokiwiz03a ?
yes ! a G4 can be SIM unlocked but it can not be CID unlocked,however,it can be upgraded to wm6 rom,but with method either 'SoftSPL' or 'HardSPL'.With your present ipl/spl 2.25.0001 and you say its NBD wm6 running,then it must have been upgraded through 'SoftSPL' method,as it uses patched ipl/spl and Cid unlocks the phone temporarily,but it never permanently CID unlocks the phone.But with 'HardSPL' ,it changes the ipl/spl to a patched ipl 2.21.0001 and spl 2.21 olip.So everytime you want to upgrade,you'll have to upgrade using 'SoftSPL' method.
could you elaborate a little more about this.
Cheers!
Hey thanks for the correspondence zabardast_1, I have been getting frustrated and I have many times contemplated going for the brick or bust approach here.
So, I have done none of the updating on this rig. I rec'd it and I wanted it primarily for wifi however I can't get the wifi card/ (sdiowlan I believe) to even recognize an AP (... I posted in the networking forum but no response.) Thus my own reasoning leads me to believe I should start from scratch with a new rom unless you know of something else.
So, I am not the most savvy and thought that all of the info I had led to SIM and CID unlocked. I just read otherwise last night and in your reply. The info I have provided is accurate the IPL, SPL, radio, although I don't know which NBD release it is; just says 6.0.0.0 and release date: 2/2/07.
I am trying to get the new rom on the my device however and I would've probably already bricked it if I could get an RUU to communicate with my wiz. I always get [Error 224] when I run it and my phone is connected through active sync. I am running vista but have installed the AS drivers for WMDC. I also tried it at work the other day with XP same situ. I then tried flashing from the bootloader screen with an NBD, Wizard Love ( w/ Italian installer?), and T-mob (226102_22610105_022511). The only one that says it will update is the Tmob ROM, however I got cold feet at the update button and canceled.
Other funny stuff I have observed that may or may not be related to the problems I am having are:
Can't install cab files ie (enable rapi or Cert SPCS) and Wiz Sys Tools couldn't read my CID block and hard_SPL G4 gives me REXX error ( SPL_Version has no value).
So, any wizdom you or anybody can drop is much appreciated and needed at this point.
Whew...
Listen carefully. G4 Wizard cannot be CID-unlocked without paying money. (And yes, you are using a G4).
What you need now is to Flash your original stock carrier ROM (Or wizard love) to get your OS back. Then either use SoftSPL or install HardSPL and flash WM6 ROM.
Thanks Starkwong,
I will try installing wizard love tomorrow at work and if that don't work I will attempt a Cing ROM (will all of these work or do I need to mind my G3's and G4's for these???)
Grazie
So, It worked using Wizard Love at work and out of the bootloader window. Now I need to:
1.) Get wifi working.
2.) Get a newer ROM
I put a post up in the networking thread, I am a tool so far as these devices are concerned so be easy on me.
http://forum.xda-developers.com/showthread.php?t=372811
So do I get the wifi issue resolved before I reflash???
Thx again
I don't know what you mean by "wifi not working".
Maybe it is the wifi AP doesn't allow 11Mbps (802.11b) connections?
However, going to any of the WM6 ROMs should already set the registry to allow Wizard connects to G-Only APs. Just use HardSPL/SoftSPL and flash a WM6 and you will see.
OK so "wifi not working" may indeed be a general statement...
What I mean to say is that I am not able to connect to any wireless networks for internet not home (Linksys WRT 54G v5 with ddwrt firmware) or school (university wide) or my city's wifi network. It won't even detect them at least none that Ive seen since I've rec'd this phone. So, that is what I meant by the ambiguous statement.
So, being as your last post was a success I will try as you say and post the results tomorrow. Thanks again starkwong!!!
1 quick thing however, to be sure, I can now try the hard spl or soft spl method of tricking my phone to run an upgrade to WM6?
Still not able to get wifi APs????
OK although I have been successful at reinstalling the Mfg ROM and then Hard SPL'ing my wizard thanks to ya'll I still am unable to connect to a wireless network (see one even). I have the Olip on my SPL and I installed a TNT version of WM6 and I am still at work (drunk but still here). Anyway I can't see my wireless AP and I am beginning to think its a hardware issue if thats possible, i dunno the dynamics of this system maybe thats why it was for sale. In any event as usual I am willing to try what ever you guys throw at me as you're my only hope obi wan. Alright Im gonna go home for the night and try getting on to my home network.
Thanks again for all the help guys.
Is your device a original one from phone operator? I suspect your device is a China Dopod 838 with replaced casing, because the China version has the wifi hardware removed, so wifi can't be started even if an English ROM is used.
Looks to be authentic 8125
Starkwong, the Cingular logo and the 8125 model # are on the phone case where they have been when I've seen them before in pics. Therfore, I dunno I guess it looks like every other 8125 I've seen. Can I check the SN, IME or anything to be sure?
Thanks Again!!!
Starkwong,
I am getting all the options for wifi on my phone the LHS LED flashes green when I enable it and alternates blue green when BT is enabled. So, could it still be that its a dupod? I dunno but I am going home for the night... Thanks for your help. I will try connecting to my home network when I get there.
Hi eveyone
i m using Imate Jasjam (hermes100). i am having a problem with network signals. its just network shows dummy signals. cant make or receive calls.
it all happened when i upgraded it to WM6. i used Hard SPL v9. the rom upgrade was ok. except that it stuck at 100% and gave a message to recover. but the rom upgrade become successful. after that i was having issue of this annoying radio prob. i used radio 1.54.30.10 after that i m using 1.54.07.00. but no change is noticed.
when the radio stops working, i change the 3G setting at Comm manager to auto mode than to GSM mode an it failed to register to network and showed "No service"
Imate Jasjam (Hermes 100)
IPL 1.04
SPL 2.60 Olipro
HardSPL v9
OS Schap's WM6 pro 4.31 full
This is a very well documented problem with hermes. More and more people are starting to have this problem now.
I had the same problem and I got a new phone under warranty.
Most likely it is a radio hardware problem and probably you will need to have the motherboard changed.
If phone is still under warranty, just get it repaired by HTC. If not then you are probably out of luck.
My 2 cents
Help needed!!!
that is very odd.
my hermes is working perfectly ok except the radio. it has never been bricked. i have flashed it many times. tried all versions of Hard SPL. tried many roms. tried many radio roms. everything installs to the last dip.
but still no success regarding radio signal problem.
i have noticed that when one sim stops showing network, i put other sim having other network coberage and it works. but jus for 10 to 12 hours. after that i have to change it back. and it works for 10 hours. but it really getting me on my nerve
please share if helpful to me.
PLEASE ADVISE ME if i get my Hermes fixed by changing its mother board, should i go for WM6 and newer radio or not.
thanks
Well,
recently I've bought 8525.
But I live outside US so i needed to unlock my device.
I've downloaded "HTC_Hermes_SIM_CID_Unlock_v3a"
and have flashed my 8525 using an microSD card.
Everything went OK, then after flashing I've launched unlocker .exe. on my device and ulocked SIM and CID.
Then I've placed my SIM-card but it won't search for any network (It continues to search and search.
What should I do in this matter?
I'm running MS Vista, so I'd be glad if U suggest me to flash using an micriSD card.
Thanks.
Please help me to get out of this case.
Edit:
I've just flashed radio 1.54.30.10 using SPL 1.40 Olipro, IPL 1.1
with no luck at all.
Help me somebody.
Still searchs and searchs network, but doesn't register on network.
Same problem (NO GSM) I'm Vietnam !
I Have same problem ! now i flashed SPL-2.10.olipro and try again with Unlock v3.exe but not progress !And i check my phone at Device Infor i cannot see IMEI (IMEI: [Emty])
AT&T 8525
I have same problem no radio no gsm no imei, try everything still same result. Can anybody help.
ONLY thing to try is to either install ORIGINAL SHIPPED STOCK ROM or the ORIGINAL SHIPPED RADIO ROM. Doing anything else may permanently brick your device. This is not guaranteed to work as the radio rom is a cantankerous SOB and seems to be the achilles heel of the Hermes. In laymen's terms, radio dead, not recoverable in most cases...
Good luck...
I'm not saying its impossible but then I believe if you jump off a cliff and try REALLY hard you might actually miss the ground...
Hi, first time i have ever had a problem with a Hermes device.
I have a Vodafone VPA version, and i have flashed "Schap's 4.31" WM6 PRO fine, like i have on many other devices in the past.
It is actualy a phone i was just sent back from someone on eBay because there was no network signal on any sim provider at all. I had unlocked it before i sent it but he has obviously done somthing to it.
So now, i can re-flash the rom fine, but i can not CID unlock it at all.
It gets to that point and give me the ERROR [262] message.
I am using "v3a by pof" to do the CID unlocking.
I have looked at the device infomation (as i can go on to windows just fine) and i do not have an IMEI number or a Radio version or a Protocol versioni number.
I think i basicaly need a Radio Rom upgrade/flash to fix it? But i can not seem to do it.
Is it somthing to do with bad blocks?....
I am dual booting Vista & XP from my laptop and have tried on both OS.
Any help would be amazing.
Update:
It also show "NO GSM" on boot along with the SPL info.
It also has HardSPL & flashing from memory card is freezing at the GSM stage also.
Why wont it let me flash a Radio to it? Its driving me crazy!
I am poor in english, so hope you can understand what I say.
Your hermes is likely the hardware is broken, I suggest you get it repaird.
My hermes like you just before the issue of "NO GSM", but I am so poor in english, I am
sorry!!!
Hmmm, that is a possibility.
But i have seem many people with the same issue and have been able to fix it.
I have been trying to wipe some settings using MTTY.exe
However, where is should be saying USB>
It is saying CMD>
I have looked through the wiki but still no luck.
Anyone else know how to fix this?