Hey guys, new on the scene.
I have a G4 Wizard, and was wondering what "extended rom" is, and also wether this affects performance of upgrading to a WM6 rom!
Also, If chosen and i dont like the WM6 rom i have upgraded to, can I use softspl/hardspl to downgrade to WM5 official rom of my O2 wizard!
Thanks in advance,
Nate
Extended ROM is the cab that will be installed each time your hard reset your Wizard (i.e. That's what to be installed after the 3 seconds wait time).
Most WM6 ROMs either overwrites or ignores the loading of Extended ROM, so it has nothing to do with performance.
You can always downgrade to your official WM5 ROM for O2 (Or the Wizard Love ROM), even if you didn't SoftSPL/HardSPL it.
Related
After trying several WM6 ROMs for my iMate JAMin (G4) I've gone back to WM5, as using this as a phone is my main priority, which every WM6 ROMs I tried, have failed to do.
Now I've got the RUU_Prophet_220734_2207114_024721_NVID WM5 ROM installed.
I'd like to know a few things:
1) Is there a better WM5 ROM than the current one I'm using
2) Is there any way to increase the free RAM? Is this Pagepool thing applicable to WM5 too? I get only 23.5MB free after a soft-reset
3) Can I get Office Mobile 6/6.1 installed in any WM5 ROMs?
4) Can i run HTC Cube in a WM5 ROM?
5) The HTC Network Wizard was a useful tool which I miss in WM5. Can it be installed & used in WM5? If yes can anybody give me the CAB for the same?
I had first posted all these questions in the 'Prophet Upgrading' section. But haven't yet received any proper answers. It seems all smart guyz are busy over here
So I hope for some ans at least now. Thanks in advance guyz....
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Ehm.. You do know that there allready IS a sticky on how to do the upgrading ?
only SPL changes you can bring back imate boot screens (splash) by using nvid ruu ,SPL is hard to change but radio and splash could be changed right!! .although first time users go into shock for days ,but don't worry i had the same one too ,it doesn't matter now.
koorosh_bsboys said:
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Click to expand...
Click to collapse
TOO LATE !!!!!
The only thing that gets me is that with the Imate you could paste into the WiFi password box, withe the Qtek you can't and when you have a 63 character password that's a pain in the arse!
Phil
but password is not managed by SPL or radio ,so suggest a different OS for imate instead of nvidQtek or get some cab to remember your password does anyone know such OS or cab
Hi, (i have an O2 xda atom exec)
i have installed WM6, (the pdaviet ROM) camera was working, then one day just like this it froze and not working at all, each time i try to put it on, the pda is blocked and have to reset...
if someone could please advise me.
thank you
if you are a serious user dependent on the pda for daily work just go back to the original WM5 ROM from o2. New ROM's are for trials and to keep your thrill alive.WM6 is not recommended on Atom exec.reflash your ROM and it should be ok.See my thread for the same problem I had earlier.
cheers
Hi, I own a Spanish Touch Dual (nike with 20 keys) since January and have some free time this weekend and since quite a long time I want to change it completely (it even needs a hard reset as it works quite slow now). I have read about hardspl, sspl, new ROMs, Manila... where can I start? I wanted to install a 6.1 Rom but it says that I need a 1.65 or higher radio version, I wanted to install Manila 2D also.... can you please help me? where do I start? Radio-> ROM -> Manila? is there any "howto"? I am completly lost! My nike is:
ROM version: 1.31.412.09 (10/30/07)
Radio: 1.58.16.27
WM 6
Identity: Niki100
Thanks a lot!
First you need to unlock your phone.. you can find out how in this forum, its stickeyd! then you need to choose a rom, either one with or without mannila 2d installed already. the flashing process is really easy and its all explaind in readme's.
To unlock, as far as I have understood:
First HardSPL (http://forum.xda-developers.com/showthread.php?t=355730)
Second SuperCID (http://forum.xda-developers.com/showthread.php?t=395945)
Am I right?
Then go and try a ROM (I have downloaded a couple and no readmes, but I think its just a double click and go, right?). In the ROM is it included the Radio? I read about a ROM requiring to have already installed a >1.65 radio version, so I asume I have to install first a ROM.
Btw, which ROM do you suggest me with manila 2D and fast? Thanks a lot!
correct!
i'd flash a radio before a rom this thread; http://forum.xda-developers.com/forumdisplay.php?f=404 im using (RUU Nike Radio 1.58.21.23S Modded)
then i highly recommend the lilly rom at the moment! very smooth and responsive.
http://forum.xda-developers.com/showpost.php?p=2698902&postcount=4
I'd agree on that radio ROM; it's the one I'm using. I flashed to the LILLY ROM in my sig and then did the radio ROM - maybe that's the wrong way round, but it seemed to work!
Thanks a lot! Do u know if the Lilly ROM comes in several languages? (At least in Spanish)
I was looking and couldn't find a clean wm 6.1 rom for wizard g4 . Everyone of the posted ones has some progs in it. Does anyone have one or can post a link?
Thank you
i think there was few older builds of clean WM6.1 roms in the wizard mobile thread. Another thing what you can do is to download the desired rom and kitchen and remove the stuff you dont like in the kitchen
Never tryed that, so better not Will try and search more if i could find maybe with minimum programs.
It's not hard to just turn off Touchflo on the ROM in my SIG. After a fresh install, has over 45MB of free memory, and averages about 20MB of RAM at idle.
wm 6 for my qtek 9100 g4
hello guys im new in this forum and i have my qtek 9100 with wm5 but i want install wm6 my question are how can i do to unlock the cid because its g4 and what happen with the keyboard i want try with some roms in spanish because im from mexico i really apreciate your help
XatanaX said:
hello guys im new in this forum and i have my qtek 9100 with wm5 but i want install wm6 my question are how can i do to unlock the cid because its g4 and what happen with the keyboard i want try with some roms in spanish because im from mexico i really apreciate your help
Click to expand...
Click to collapse
You have two choices:
HardSPL (semipermanent, fools the hardware into believing that it is unlocked)
SoftSPL (temporary, places the phone in a semi-unlocked state long enough to flash it)
For most people, I recommend SoftSPL, simply because it's easy to revert back to your OEM ROM in between updates, if you turn into a flashing junkie.
hi im new
please help me to update my qtek9100 g4
my msn is
[email protected]