No sound - G4

I just flashed my O2 XDA NEO to WM6 Prophet Touch 9 and suddenly the Mic is no longer workig while in cal the speaker is fine but when it gets to the mic it is dead ,,, any ideas or is it just a hardware problem ?

i have the same problem, anywehre can help??

The same problem with the same rom? Then try another rom.
I flashed WM6.1 Korand and Shodow Vista "My Edition" and i haven't any problems!
My Prophet is a G4 too!

Related

Bluetooth Headset Problem on WM2003SE

I sucessfully upgraded to WM2003SE according to the guide on this forum.
WM2003SE run great on my XDAII. However, I have noticed a problem on the bluetooth headset (H810).
I can pair with my headset. There is no problem on dialing and the sound route to the headset.
THe only problem is when I'm receiving a call from someone. I can only hear one "beep" from the headset. That's it. eventhought I press the button on the headset. it won't connect .....
It seem that it's not connect to headset when receiving a call
Does any one have this problem ?
please list out which version of win2k3 SE
you r talking about 8)
Here is the version
2.06 (OS)
1.18 (Radio)
Ex-ROM (2.XX.100a)
Can anyone help me out ?
did you try version 2.02ti
& 2.20 ? :twisted:
did you try with no EXT ROM, flash 2.06 ? with your BT headset?
I just try the ROM 2.20 CHT.
It's Prefect... Bluetooth works as it is.
Haven't try 2.02t yet.....
I also try 2.06 and without running any CAB from Ex-ROM. The result is still the same.
Is it bluetooth on ver 2.06 isn't working.... or just happen to be me only ?
simon_als said:
I just try the ROM 2.20 CHT.
It's Prefect... Bluetooth works as it is.
Haven't try 2.02t yet.....
I also try 2.06 and without running any CAB from Ex-ROM. The result is still the same.
Is it bluetooth on ver 2.06 isn't working.... or just happen to be me only ?
Click to expand...
Click to collapse
I m sure 2.20 CHS (no CHT at this moments) is working fine, cause I read alot of post saying very good with BT, most of them say can see caller id show up in BT headset.....
2.06 ... I saw few got no problem with them but not sure the same model or not, but however, I know one things, I did tested 1 of the motorola one before, which is not working in normal o2 xda 1.6x WWE, then I try another one same model , but work
the 1st one I test is a old stock, so I think the new one got latest firmware/softawre or whatever inside
Hi, I am having a problem same as Simon too, I just upgraded to 2.06, did not try other version !
I am also using the Motorola HS810.
Where can I down load the Chinese 2.20 version ?
Does it selectable to englist wording ?
I heart it better then v2.02 & v2.06 !

is it possible to downgrade xda 2 wm6 to wm2003se

i am currently using tofclock wm6 on my xda2.
due to unavailaiblelity of sim tool , i would like to dwngrade it to wm2003 se.
is this possible ?
i was unable to find wm2003 se after days of searching.
would anyone mind to advice ?
thanks
why you not to try another wm6 ROM ?
WM6 stable faster and have more increasing machine to working.
and you will be able to install SRS-WOW to get great SOUND in Bass, Treble and Surround.
i used C_ShekharAKU7.0c.R40.P24_public before, and very happy
my xda II sometimes can boot normaly, but sometimes only Please Wait, and backlight not show.
please help
At "XDA WIKI" there is a wm2003 for XDA II for download.
it's oke when to up/down
but what happend to down.u can grade to other rom to try best rom in your device
my device xda2 boot 1.03 wm 6.1
Jameswongts , do you mean you had no phone service after upgrade to wm6.1 ?
Dirkman.

bluetooth problem with wm6.1 rom

hi, i have a qtek s200 g4 with wm6.1 shadow edition 2.0 TE by cloudyfa , and it's work great but it has bluetooth problem, no one can send me anything, the error is conection error, but i can sent any thing by bluetooth. please help to solve it.
i'd tried:
Prophet_ShadoW_2.0_CE_Black_with_new_icon (wm6.1)
Prophet_ShadoW_2.0_TE (wm6.1)
Prophet_ShadoW_1.0_TE (wm6)
My_Green_Edition_WM6.1
ShadoW2_VE_Cube
all are the same in blutooth. at last can some one help me to find original wm5 rom
There is not any problem.You have to check the option Settings->Connections->Beam->Receive all incomming beams and then go to the bluetooth settings->Mode and check the Make this device visible to other devices.
Your provlem is now solved ^^
All of the WM5 ROMs are available on the wiki/FTP server. Take a look if you still want one.
I have SPV m600 G4 and same problem.
I checked Beam but I have the similar problem. I find out that my Com Manager always blocks, after that Bluetooth and wireless stop working.
I just finished installing new rom, and completely remove shortcut Com Manger, I use sniper for Bluetooth and I searching for Wifi program.
Now I testing WM6.1 Korand WWE 3.1
Forcego When You solve problem please post solution.
I had similar problems with almost all wm6.1 roms. But all my problems are solved now by using the wm6.1 wm7 styled II. Don't forget that you MUST have Radio Rom 2.19.
Good luck
forcego said:
hi, i have a qtek s200 g4 with wm6.1 shadow edition 2.0 TE by cloudyfa , and it's work great but it has bluetooth problem, no one can send me anything, the error is conection error, but i can sent any thing by bluetooth. please help to solve it.
i'd tried:
Prophet_ShadoW_2.0_CE_Black_with_new_icon (wm6.1)
Prophet_ShadoW_2.0_TE (wm6.1)
Prophet_ShadoW_1.0_TE (wm6)
My_Green_Edition_WM6.1
ShadoW2_VE_Cube
all are the same in blutooth. at last can some one help me to find original wm5 rom
Click to expand...
Click to collapse
that is not bluetooth problem.
Take a look here
you have to do that settings first,.

Problem with upgrading titanium I and II , but no vendor and PDAViet working fine

Hello,
i've installed rom no vendor in my i-mate jamin , no problem work fine,
also i installed PDAViet PV_4.0.0.0.6_Touch wm6.1 no problem work fine,
but 5-6 times i installed wm6.5 build 21725 and 21501 Titanium I and II
upgrading rom 100% successfully but after that phone hangs on booloader (3 color screen)
how to fix it?
Thanks
after upgrading to wm6.5 and stuck in bootloader , i can install no vendor wm5 or pdaviet wm6 again successfully.
problem just with wm6.5
well.....
did you HardSPLed your Prophet and Flash with LazyTool?
ataomega said:
Hello,
i've installed rom no vendor in my i-mate jamin , no problem work fine,
also i installed PDAViet PV_4.0.0.0.6_Touch wm6.1 no problem work fine,
but 5-6 times i installed wm6.5 build 21725 and 21501 Titanium I and II
upgrading rom 100% successfully but after that phone hangs on booloader (3 color screen)
how to fix it?
Thanks
Click to expand...
Click to collapse
You would do well listening and answering to DIOXDA2 his lazy tool will solve this, Instead of starting a new thread you could have posted in the ROM you are having trouble with. There are others with the same problem and now they are all up and running always good to look before you Post my freind
Hello,
Thanks for your replies, HardSPL? no , i dont know what is it either, now checking ...
thanks in advance

Atom V sms problem

I just bought a NEW MWG Atom V.
It cannot receive sms after I reply until I turn off the signal (not the phone) and turn it back on. It's kinda a nuisance.
I try upgrading it to WM 6.1 but the problem persist...
Can anyone offer an advice plss??
wow.. sis u exist in here to...
what wrong with your atom V
its will hapend with my atom V to??
dhikdoc said:
wow.. sis u exist in here to...
what wrong with your atom V
its will hapend with my atom V to??
Click to expand...
Click to collapse
if ur unit works fine now, most likely it will stay that way. My unit had this problem from the start. So i tried flashing it. After flashing it with the version with the manila interface, the problem is solved.
this is the one i use.
http://www.megaupload.com/?d=HMKCE29I

Categories

Resources