my 838 pro with activesyn 4.5 refuse to connect to the update software .
when it verifying the device ,the phone turn to green ,blue ,red n white screen ,then disconnect from activesync ?
i have to flash the device cos it have no gsm service when powering up .
Please i need your expert advices ,thank you .
Related
i have vodafone PDA1605. i try to update with orignal htc tytn windows 6 rom after one % it says inviled verder id & device restart. after restart after displaying vodafone logo & windows logo screen goes white. i try so many things after that. i try vodafone orignal rom (HER_VODA_1201616_1030600_UK_SHIP) when first start to update with this rom it displayed pocket pc rom ver. when i try next to update this ver with same ver(HER_VODA_1201616_1030600_UK_SHIP) error message displayed check your cable or pda (message no. 260) but when i try 2 update with Tytn win 6 rom. its woking but only one % & message displayed inviled vender id. i try to update spl & radio ver but displayed your image corrupt.
my device IPL-1.00
SPL-2.03
plz help me if some one know's ?
Hi!
Recently I try to flash my SPV m3000 using HardSPL and then shelltool (with a rom wm6 HTC Professional)
And now, my pda still on orange page where I can see SPL and IPL version.
(IPL : 2.16.0001 SPL : 2.16.0001)
If I try something :
Hardspl doesnt find my mobile device!
Shelltool doesnt work and still not responding!
Any RUU say ERROR [260] Update error : The update utility cannot connect to your PDA phone!
I try that in bootloader mod. My PC see my device (in "Gestionnaire de périphérique" I dunno how to say that in english!), but Windows Mobile Device Center doesnt!
Can someone help me please?
Thx
I think that basically your device is unknown to windows enter bootloader manually yourself, do not connect it. Then open windows mobile devicecenter and select connection settings and untick the allow usb connections then connect the device and try to flash it.
I also hope you realise that you have a G4 device and are not trying to flash a g3 hardspl go here to get hardspl for g4
http://forum.xda-developers.com/showthread.php?t=332320
windows Vista is not recommended for HardSPL,its not compatible,still got issues.Try to do on winXP pc and use ActiveSync 4.5,there shudn't be any problem.
Well! there's no 'G3 HardSPL' as yet!!! its only 'HardSPL' for G4 devices.
Thx all!
Ill try on XP..
Ill say the result..
So I try.. and always the same message ERROR NO DEVICE DETECTED
I try that with XP Activsync 4.5 and my spv connected in bootloader and connected less bootloader!
So if u have any other idea.. Welcome!
You have connectivity problem,to verify if the phone is establishing connection with pc via usb cable,get the phone into Bootloaders then connect it with pc through usb cable and check small usb appear at the bottom of the Bootloader screen,if its there,than its establishing,otherwise there's a connection problem.Either usb cable is faulty or the mini usb port of the phone is damaged.
...
Its written USB in bootloader and I can see my spv in device manager..
So I explain what I think.. Maybe theres only the bootloader of orange on my spv on no more wm5.. and I cannot flash only the bootloader..
If any idea come.. Already thx!
I have Orange SPV M3100 having Black Satin Lite, I am going to load Black Satin Normal edition. Everything goes well it communicate with device and tell me older version and newer version as well but when i press Upgrade button, my device turns off and Active Sync drops connection and Active Sync window disappears. then after 2 minutes Upgrading software reports connection error check usb cable.
Furthermore my device OK button do not work so i am unable to go into boot loader mode.
Any help will be appreciated.
Thanks.
OK, so I tried to install nand android on my htc hd2 and firstly I installed hspl 3 on it then as instructions said I updated ROM version to MAGLDR ... And now phone is frozen right after I turn it on it only shows me O2 welcome message. Please don't tell me that it is coz the phone is locked to o2 network because there r so many threads and no one mentioned that u can't install android if the phone is locked or I missed something SO any help pls? I am freaking out that my phone is dead.
RAM 512
ALso:
When I press a red button near the sim card while holding volume down and it shows 3 colour screen and connect it to the pc , pc does make a sound as phone was recognised but it doesnt come up with any windows or anything that I could see that phone is there.. Is there any way I can install old rom or smthing to get my poor phone back, please help me, I am not experienced in this at all and first attempt failed
Put the phone into BootLoader mode. At the bottom of the screen you will see 'Serial'. Now plug it into your computer and the 'Serial' changes to 'USB' - you have made a good connection to the computer. The computer doesn't recognise it as a phone, because the phone firmware has not been booted up, so don't wory about it.
Run the O2 ROM form the computer. One of the conditions is that you have made an ActiveSync connection, just tick the box and proceed.
Once the ROM has flashed, it is advised to do a hard reset, but I have never had a problem not doing it.
Now you are back to the begining.
You are getting a little mixed up between Operator (SIM) Locked and Firmware Locked. They are independant of each other. You can SIM unlock your phone, which means you can use any telecom's SIM card in your phone even though the phone boots up with an O2 logo. You can unlock the firmware (HSPL) so that you can use the stock HTC ROM (not the 3.14 version) or one of the excellant custom ROMs, now the phone won't show any of the O2 stuff but you are still limited to using O2 SIM cards.
Now you have to Run HSPL2 and select the SPL 2.08.HSPL. Since you want to run Android NAND you have to flash a .50 RADIO - try the 2.15.50.14 RADIO.
I would have a real good read * HERE *. And if you want to go ahead, the read it again.
i have : htc mozart
Os 7.0.7004.0
Frimware 2250.09.12830.707
Radio 5.52.09.16_22.33a.50.10U
conect to zune, u'll update. your phone from asia?
???????????????/
is made for UK i think because the charger is whit 3 pins
i put a orange ro sim end work well
I can t instal chevron 7 unlocker, mobile phone device manager.........
need help