Related
I read in wiki "Bootloader 1.06 and 1.09 do not have 'rtask' command, this means: you will not be able to do radio upgrade only on your Hermes, you will stay always with the Radio version contained on the ROM you flash"
Does that mean that my Tytn i can upgrade just all completed ROM?
I try to install just radio rom, i have error 114.
May i install a "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10 _108 _Test.exe" ??? in my Tytn?
My IPL is 1.00 and SPL 1.06
Thnks.
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Don't flash the entire new roms or you will be losing the ability to change your radio roms.
nugift said:
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Click to expand...
Click to collapse
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
dodadent said:
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
Click to expand...
Click to collapse
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
nugift said:
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
Click to expand...
Click to collapse
Thnks man, a lot.
Everything is going OK.
Thnk you very much again.
hi everyone
i have imate k-jam. could i download rom 6.5 from this site.is it g3 or g4.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
k-jam is a WIZARD, go to WIZARD rom development section. also for any type of queries, post ur queries in wizard rom development section.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
how can i upgrade to 6.5 please help me
ultramag69 said:
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
Click to expand...
Click to collapse
what is brick how can i get it
rockonhell said:
what is brick how can i get it
Click to expand...
Click to collapse
A brick=paperweight
just flash something that doesn't belong on the hermes (like wrong radio, or rom built for different device), and POOF! you have yourself a nice fancy brick!
Guys, how do I dump the SPL, IPL, Bootloader, radio ROM and Radio bootloader version?
I will use the unlocker to unlock the TYTN but then I want to roll back to the default version numbers that I have. I dont want it to stay with the HardSPL or with the newer Radio.
Thanks
Have you ever try to use the search function first? ...or just read the Wiki?...here are the how to...but next time read the wiki first!
Regards,
Primoz
Guys, it starting to get boring.
On every question asked, you send to RTFM.
Maybe, just MAYBE, I already READ everything and I STILL (!!!) have a question? Maybe I'm not as stupid as you think? Maybe the guides are NOT (?!?!!) 100% perfect?
To the subject; I did dumo the ROM. However, as I understand (FROM the guide), it DID NOT dump the SPL and the radio (or the bootloader and the Radio bootloader).
Please confirm that it DID extract everything and that if I'll burn it back to the device it will be 100% the same as it now.
Also, if I first use the unlocker, and then burn back the original radio, will it get locked again?
knfevg said:
Guys, how do I dump the SPL, IPL, Bootloader, radio ROM and Radio bootloader version?
Click to expand...
Click to collapse
You don't need to dump that, every version is available as a shipped upgrade so you can extract it from there and flash it later if you need it for warranty reasons.
knfevg said:
I will use the unlocker to unlock the TYTN but then I want to roll back to the default version numbers that I have. I dont want it to stay with the HardSPL or with the newer Radio.
Click to expand...
Click to collapse
Most probably your rom is available as a shipped NBH, just flashing it will lead your device to the original rom. The only thing you can't do is go from htc_boot 0108 to htc_boot 0106, so make sure you don't upgrade to a very new radio if you want to be able to go back to your original radio if it has a 0106 radio bootloader.
knfevg said:
To the subject; I did dumo the ROM. However, as I understand (FROM the guide), it DID NOT dump the SPL and the radio (or the bootloader and the Radio bootloader).
Click to expand...
Click to collapse
Following the guide, you've only dumped the OS part of the rom.
knfevg said:
Please confirm that it DID extract everything and that if I'll burn it back to the device it will be 100% the same as it now.
Click to expand...
Click to collapse
Tell us how it is now.
knfevg said:
Also, if I first use the unlocker, and then burn back the original radio, will it get locked again?
Click to expand...
Click to collapse
no.
POF, you are THE GOD!!! Thanks, finally someone HELPS!!
Ok, here are the clarifications:
1. How do I check the htc_boot version? I have the 106 SPL so I can’t launch the Radio loader from there....
2. If I dumped only the OS part I guess I should dump the rest too. How do I do that and how do I make the "burnable" afterwards?
3. Here is the current "setup":
The device is Orange branded. It’s exactly as described under "Hermes versions" in Wiki for Orange-Israel:
Israel Versions
HERM200 Orange IL HTC TyTN Israel QWERTY Locked OS 5.1.195 (Build 14955.2.3.0) 1.18.255.3 07/22/06 WWE 1.18.255.112 1.03.03.10 32.34.7010.01H
The SPL is 1.06 and IPL is 1.01. I have no idea how to check the HTC_BOOT version.
There is an Orange boot logo.
Guess that is. Thanks once again
knfevg said:
1. How do I check the htc_boot version? I have the 106 SPL so I can’t launch the Radio loader from there....
Click to expand...
Click to collapse
You should use a SPL based on 1.01 or 1.04 to use 'rtask' and access the radio, you can either flash it or use SSPL to load the NB without flashing. Anyway you don't need to do that, radio 1.03.03.10 has htc_boot 0106.
knfevg said:
2. If I dumped only the OS part I guess I should dump the rest too. How do I do that and how do I make the "burnable" afterwards?
Click to expand...
Click to collapse
You don't need to dump the rest. See later.
knfevg said:
3. Here is the current "setup":
HERM200 Orange IL HTC TyTN Israel QWERTY Locked OS 5.1.195 (Build 14955.2.3.0) 1.18.255.3 07/22/06 WWE 1.18.255.112 1.03.03.10 32.34.7010.01H
The SPL is 1.06 and IPL is 1.01.
There is an Orange boot logo.
Click to expand...
Click to collapse
A full shipped NBH consists on 7 parts: IPL, SPL, MainSplash, SubSplash, Radio, ExtROM and OS.
See the hermes shipped upgrades wiki page. Use nbhextract to separate the NBH into rom parts.
Download any orange ROM to get your MainSplash.nb & SubSplash.nb (boot logo as you say).
Download any rom with IPL-1.01 & SPL-1.06 to get IPL.nb & SPL.nb
Download any rom with radio 1.03.03.10 to get GSM.nb
Unhide your ExtROM to get the files in Extended ROM, then create ExtROM.nb using ExtROM image editor.
Reconstruct the OS.nb using the instructions on wiki (see trinity wiki also)
Finally, create a NBH using nbhgen, and package it with CustomRUU to be able to flash it pushing SSPL.
Make sure you don't upgrade to any radio with htc_boot 0108, otherwise you'll never be able to flash your original radio again.
Hope it's clear
Thanks POF. PERFECT!!!!
Maybe a Wiki should be made for this as I notice alot of people asking on how to go back to the original state of their device?
tnx in advance
sir POF i did want to get the original state of my device for warranty purpose..
I tried everything i can.. i read a lot.. still confusing me.. I did encountered No GSM, the phone dont boot..
I run WM6 Cooked rom before..
heres my device now...
Dopod 838 pro Asia
ORIGINAL
ROM 1.23.707.4
07/21/06 WM5
RADIO 1.06.00.10
PROTOCOL 32.37.7010.01H
OS BUILD 14955.2.3.0
AKU 2.3
SPL 1.04
HTC BOOT 106
IPL ?
NOW RUNNING
WM5
ROM 1.23.707.4
07/21/06
RADIO 1.40.30.00
32.73.7020.16H
OS BUILD 14955.2.3.0
SPL OLIPRO 2.10
IPL 1.04
AKU ?
HTC BOOT ? dnt know if it changed
Ive read ur message.. I just want a simple question...
BASED on the data above is it possible to bring back the device on its
original state specially the radio and SPL ?
TNX in advance..
Im willing to research again if yes..
I have SPL - 2.10 Olipro. I am trying the various Boot Roms starting from 1.41 backwards as someone recommended in some other thread.
But I need to run SSPL before or I get an Error why does that happen why can't the SSPL of the ROM upgrade check and do the needful.
Secondly I want to revert back to SPL-1.04 or 1.09 is it possible. If yes please tell me how. If it is detailed in some other thread please tell me the thread details and oblige.
THANKS IN ADVANCE.
tonetagabaler said:
BASED on the data above is it possible to bring back the device on its original state specially the radio and SPL ?
Click to expand...
Click to collapse
Radio no (you cant go back from htc_boot 0108 to 0106), SPL and rest of rom parts yes, it's possible to return to original state.
hsanghavi said:
I want to revert back to SPL-1.04 or 1.09 is it possible. If yes please tell me how. If it is detailed in some other thread please tell me the thread details and oblige.
Click to expand...
Click to collapse
Read the HardSPL sticky thread.
I tired but could not locate the Hard SPL thread can you please tell me where to find it.
THANKS.
Hi there,
My X7500 internal GPS seems to have a defect. The slightest touch makes it lose it's fix as if there's a loose contact. My x7500 is SuperCID (IMEI-Check) and has OliPRO hardSPL.
Is there a way to downgrade to the latest WM5 version prior to me sending it back to HTC for repair?
Cheers
I can confirm that with superCID and OliPRO I haven been able to succesfully up&downgrade back & forth between WM5 and WM6
FYI
With one exception. When going back to WM6 I lost my radio 1.45 in the process. I was stuck at 1.38, and upping to WM6 did not bring back the later radio stack.
*Update* Olipor's unlocker nicely took care of that. I now actually managed to combine rom 2.20 and radio 1.47. Thx Olipro for a helluva job building the unlocker! The only thing now is to see whether radio 1.47 improves some of the GPS reception. If not, it's down to WM5 and back to HTC with this puppy.
Do you have the unbranded version of X7500?
Which ROM did you use to go back to WM5?
I have the HTC Generic X7500 (originally Dutch). I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe to go back to WM5, but the prerequisite is OliPRO *and* superCID.
OliPRO's unlocker will do that for you and gets you these two prerequisites.
Wiz said:
I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
Click to expand...
Click to collapse
where i can get this WM5 ROM ?
Wiz said:
I have the HTC Generic X7500 (originally Dutch). I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe to go back to WM5, but the prerequisite is OliPRO *and* superCID.
OliPRO's unlocker will do that for you and gets you these two prerequisites.
Click to expand...
Click to collapse
Thanks!
haim said:
where i can get this WM5 ROM ?
Click to expand...
Click to collapse
You can download it from the xda ftp.
O.K Thanks!
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Bram87 said:
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Click to expand...
Click to collapse
Well, this is not EXACTLY correct. Check out THIS LINK for downgrade directions. You will need to get the original ROM from somewhere. It is possible that it is HERE IN THE WIKI. Chances are that one of the files there has the same Radio, IPL & SPL. You will just need to find the OS, if it is not in there. (In fact, based on the specs, it looks like the third from the bottom of the English ones - Vodafone?) To flash, you will need dutty's good nbh tool to unpack the ROM, becuase you will need to do the IPL and SPL separately from the OS and radio. See THIS LINK for that info. If you don't want to get into all the unpacking, you *could* do the SPL downgrade first, then the upgrade, but it is generally good practice to downgrade SPL as a LAST step since you lose the hardspl protection as soon as you do it. Finally, use the google search link in my signature if you need to find anything else. Good luck.
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Like Todd said it is possible.
Check out the links in my signature and read alot before actually doing so.....
That is a practice tip
The Mr VanX guide alias HTC Hermes guide has complete steps to do this!
Good Luck
Ok, tell me if i correctly understand..
I found the correct rom, after i have to unpack this rom with dutty's good nbh tool..(i have to remove Ipl & Spl?).
After the unpack i have to pack again the rom without ipl and spl and flash it in my Herm??!!is it correct? And in the end i have to change ipl and spl(is it a down grade?).
Last questions yet,
What i have to verify first that i start all this work on my herm to not brick my Herm?
Thank you to all again for the help that you are giving to me
All the best
I may have made it more complicated. That is the process I use.
Best thing to do is simply follow Mrvanx guides.
First downgrade the OS/Radio using THIS GUIDE
Then downgrade SPL/IPL using THIS GUIDE
That is all - as long as you have HardSPL, it is VERY hard to brick your device. So, do that last.
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
zetax said:
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
Click to expand...
Click to collapse
Yes. The only reason to remove HardSPL is for warranty. Just for clarification, there is no Hard IPL, only Hard SPL, but I know what you mean.
Basically, 99% of the time most of us flash we are only flashing OS or Radio. SPL and IPL don't change often. Most cooked ROMs are released as OS only.
Ah ok perfect, i'm not interested to the device warranty, because i bought it on ebay from Uk, and there is no warranty on my device, so i can only flash os without ipl and spl..
Thank you very much fo all the help
<< ZX >>
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
zetax said:
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
Click to expand...
Click to collapse
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
todd_jg said:
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
Click to expand...
Click to collapse
Todd, thanks very much, i didn't know that with winrar was possible to unpack an .exe file,now i have all i need to flash my device with the hold or the new vodafone uk rom.
Tnx my friend
I have done the flashing, it works perfect.. now i learn the way, i can flash every kind of Os in my tytn following this way?for example o2(Uk) os can be put in my device?
Where here in xda forum can i find the software(for eample the software that shaps have included in his Os) for my device customization?like today home,weather widget, or the automatic operator configurator etc etc?
Tnx todd
Hi,
A few weeks ago I upgraded my T-Mobile Vario 2 to WM6 using the TMUK official update. I like WM6 but now need to downgrade back to WM5 because my satnav software (Route 66 Navigate 7) doesn't work on WM6! I've downloaded the WM5 rom from TMUK but it won't install - it puts the phone into debug mode (the multicoloured thing) but then waits for a while before coming up with an Error 260.
I've read all the guides and used the search but can't find an answer - this is a "stock" phone, not unlocked in any way and I'm only using the official operator's ROMs. Any ideas?
Many thanks,
Tim
http://forum.xda-developers.com/showthread.php?t=364424
read this it seem to be the same error
Thanks - but I was hoping to avoid having to unlock the phone. As I understand it I shouldn't need to seeing as I'm trying to install official operator roms?
Cheers,
Tim
what is your bootloader version (HINT HINT)
IPL 1.04
SPL 2.03
I thought none of that mattered if I have only ever used official TMUK operator roms? I went from an offical WM5 to official WM6 and now I'm just trying to go back to official WM5? Whilst I trust the people on here more than I do TMUK support they say there should be no problem doing this.
Thanks again,
Tim
tj80 said:
IPL 1.04
SPL 2.03
I thought none of that mattered if I have only ever used official TMUK operator roms? I went from an offical WM5 to official WM6 and now I'm just trying to go back to official WM5? Whilst I trust the people on here more than I do TMUK support they say there should be no problem doing this.
Thanks again,
Tim
Click to expand...
Click to collapse
Since the old RUU isnt aware of the newer SPL version you have that is why it doesnt work.
Follow the guide for downgrading HERE.
BRILLIANT! Thanks mrvanx. I put HardSPL on using your instructions, then followed the WM5 downgrade guide. Only problem was that autodetect of my bootloader didn't work, and my SPL version wasn't listed so I had to use SafeSSPL. Seems to have worked, thanks again.
Cheers,
Tim