Looking for Hard Cases for Softbank X01HT in Hong Kong - 8525, TyTN, MDA Vario II, JasJam Accessories

Hello guys,
I'm looking for a hard case for my x01ht, since dopod 838pro's crystal cases do not fit and i dont like silicone case as well.
anyone got one in HK? if so where?
If i can't find it, i am looking for a 838pro housing as well in hong kong... anyone know where i can find em cheap?

i have same problem....
i was using soft silicone case but the hard ring that clip on the side of the X01HT is easy to be broken. i have the machine for just 2 month i already killed 2 cases(momex brane)
now i dun use any case....just consider if one cost 35HKD...i keep replacing it per month the amount a pay is almost enough to have a case replacement, i mean the whole stuff.

berwick said:
i have same problem....
i was using soft silicone case but the hard ring that clip on the side of the X01HT is easy to be broken. i have the machine for just 2 month i already killed 2 cases(momex brane)
now i dun use any case....just consider if one cost 35HKD...i keep replacing it per month the amount a pay is almost enough to have a case replacement, i mean the whole stuff.
Click to expand...
Click to collapse
I had the same problem before with those piece-of-crap Momax and other no-brand soft silicon cases... and one day I spent HKD80 on a Capdase one, and never regretted. Not only it also protected the plastic around the camera, came with a plastic screen cover, and a keychain, the most important point is: IT'S FREAKING DURABLE!

and ...where can i got one in mainland....

oh yes..the capdase one is damn good....
but 80HKD..i'll probably pay double for leather case
it make u look much more like a successfull business man
lol
btw...i think tytn is right on the size limit, better with no case or else it will sized like a real brick...
and if u r sayin in mainland....the brand in china is "卡登士"
but just aware of those imitation one

berwick said:
oh yes..the capdase one is damn good....
but 80HKD..i'll probably pay double for leather case
it make u look much more like a successfull business man
lol
btw...i think tytn is right on the size limit, better with no case or else it will sized like a real brick...
and if u r sayin in mainland....the brand in china is "卡登士"
but just aware of those imitation one
Click to expand...
Click to collapse
Thanks a lot. i'll check it~~
by the way, shall i buy this stuff on ebay?

Related

Cases

In addition to the Vaja, Krusell and Brando cases. Is there something else out there that is not a leather case
Do you guys have a link for some cases?
I suppose with the case you cannot use the cradle, right?
What about the camera and keyboard?
I am interested in something like this http://www.expansys.com.gr/product.asp?code=115109&asource=IMATE_III_EU
Nutshell cases
I have bought a Nutshell case for my QTEK 9090. 2.5 Years ago I have bought a Nutshell case for my old and trusted XDA. Great quality cases, worth every penny . http://www.tuff-as-nuts.com
DjBac, Í've bought the following case:
http://www.pdashop.nl/product/3774/3614
You can still use the camera and when having the case "unlocked" you can even access your keyboard.
Henkjan
That's the case I am interested in too and found at expansys!!!
But how can you have access to the cam?
Thanx a lot!!!
Re: Nutshell cases
siliconaddict said:
I have bought a Nutshell case for my QTEK 9090. 2.5 Years ago I have bought a Nutshell case for my old and trusted XDA. Great quality cases, worth every penny . http://www.tuff-as-nuts.com
Click to expand...
Click to collapse
Hi Siliconaddict,
Refering to the Nutshell case for your QTEK 9090, is it hard to pull the unit out of the case? Will your thumbpad slides out while u're pulling it out of the case?
I'm very interested in getting 1 for my XDA IIs.
Ishnohiwa said:
DjBac, Í've bought the following case:
http://www.pdashop.nl/product/3774/3614
You can still use the camera and when having the case "unlocked" you can even access your keyboard.
Henkjan
Click to expand...
Click to collapse
I got the Case today!!
Great quality.. One question though...
Do you have the plastic transparent film between the keyboard and the top of the phone or just on top of the phone?
I hope you understand what I mead!!
Well i am looking for a cese to but can't decide yet what i want exactly. I had a palm Tungsten T and bought a piel frama leather case for it. And it was great quality.
But i can't decide if i buy one for my MDAIII.
Maybe someone has a piel frama and an MDAIII and can tell me what he/she thinks about it.
greetz
case for PDA2k
I bought the Krussell Case from the Imate store out of Saudi Arabia.
I suggest the Multidapt product line, this way you can switch out the clips that go on you belt or your pocket.
Well i don't think that case would do for me. I am realy intressed in that pielframa case. But one thing i worry is that if u carrie SD cards in it.
Are those things not pressing on the screen of your MDAIII.
I don't want scratches on my screen. I am looking for some good screen proctetors to.
But first the case.
robertobadjo said:
Well i don't think that case would do for me. I am realy intressed in that pielframa case. But one thing i worry is that if u carrie SD cards in it.
Are those things not pressing on the screen of your MDAIII.
I don't want scratches on my screen. I am looking for some good screen proctetors to.
But first the case.
Click to expand...
Click to collapse
The link that Ishnohiwa provided, seems to point to a Piel Frama.
Personally I've had a Krusell Multidapt with my o2 XDA II for months and never lost one SD card (I always carry my SD 1GB and Sandisk WiFi 0MB wherever I go). That's why I'll be sticking with Krusell when I get my o2 XDA IIs in the next couple of days.
In terms of screen protectors, I've had a chance to try many but none can match the eXiM Screen Protectors!!They rock!
Here's a link to a review on the Exim Screen Protectors on TheGadgeteer and another one by my good buddy Mike on Mtekk.

just ordered an alu case for the Imate PDA2K/Qtek9090/MDAIII

I just ordered an alu case for my PDA2K LINK TO ALU CASE , for 24 euros it's not too much either
Because I ordered the JAM yesterday at that shop too, and they have to ship it from the Netherlands to Belgium, I told them to send it together with the JAM next week.
I'll post some pics for you guys next week...
edit: just saw they got a lot off types of cases for the PDA2K...
Just wish they had one for the JAM too :-(
that looks nice, do u kno if there are more pics available and pics from u would be great... do they ship to the US?
They ship everywhere in the world. Cause they have to ship it for me from the Netherlands to Belgium (not as far as US :lol: ), but I don't know what the shipping fee will be for US, you might send them a mail at [email protected] and ask them.
As soon as I got it (can be any moment) I'll send you some pics.
I just received the same case from Brando (HKG) and it is simply too bulky (I have cases made by the same company for the Treo 600 & HP 2215), but the one for the PDA2K is way too thick IMHO. The upside is that it affords very good protection while allowing good amount of button access.
Would this case be much more like it?!
Anyone can help me to choose between the upper one of VW_ELM of this one:
http://www.innopocket.com/web/showProductDetail.asp?ID=126
The innopocket one is of new design (flip) but it definitely looks a lot more fitted than the one with flip on the side.
Anonymous said:
The innopocket one is of new design (flip) but it definitely looks a lot more fitted than the one with flip on the side.
Click to expand...
Click to collapse
So, the other one (Brando of PDAir) is very large fitted around the device? That should mean that it is not very usefull!
Is it also not usefull, because the device isn''t very easy to slide out?
Can anybody state if the case not from innopocket is usefull and good fitting? Or isn't it?
Bugga Bugga bugga I want one but in sterling Prices!
Anonymous said:
Bugga Bugga bugga I want one but in sterling Prices!
Click to expand...
Click to collapse
http://www.oanda.com
Don't know about these aluminium cases - they don't have anywhere for my credit cards or licence. I think I'll stick to the leather case by Krusell.
http://www.krusell.se/product.php?s=2&product=1816
Any loss of phone/Wi-Fi reception with the Alu case on?
Hi!
Have you noticed any decrease of phone or Wi-Fi reception with the Alu case on, as was the problem with the XDAII Alu cases?
Thank you!
Chris
Anyone has the metal case already? Was wondering about some experiences!!!
Anyone has some experience with Innopocket? Was wondering how long shipping would take!
I always carry my qtek 9090 in my pants, I don't want a whole case for my qtek for it adds to much thickness. What I am looking for is some sort of plastic lit to protect the screen, something like the lit that came standard with the iPaq 38xx / 39xx, does anyone know if this already exists for the qtek 9090?
Anton
i ordered the one from http://www.innopocket.com
it is aluminum, and has a clear plastic front.
outz said:
i ordered the one from http://www.innopocket.com
it is aluminum, and has a clear plastic front.
Click to expand...
Click to collapse
Do you have it already? How long took shipping for you?
Ok, I ordered the Innopocket Alu Case and it will be sent tomorrow! That means I will have it at the end of the week!
j_metselaars said:
outz said:
i ordered the one from http://www.innopocket.com
it is aluminum, and has a clear plastic front.
Click to expand...
Click to collapse
Do you have it already? How long took shipping for you?
Click to expand...
Click to collapse
I preordered it a month ago... I just received an email with a tracking number showing it will arrive tomorrow.
Re: Any loss of phone/Wi-Fi reception with the Alu case on?
cchris said:
Hi!
Have you noticed any decrease of phone or Wi-Fi reception with the Alu case on, as was the problem with the XDAII Alu cases?
Thank you!
Chris
Click to expand...
Click to collapse
I'm thinking about getting one of these aluminum cases too and was wondering the same thing. Do these effect reception?
I'm more concerned about phone reception than Wi-Fi. I currently have an aluminum case for my Toshiba e755 PPC, and it hasn't really hurt my wifi reception too much (then again, I'm usually within 15 feet of my router).
outz said:
i ordered the one from http://www.innopocket.com
it is aluminum, and has a clear plastic front.
Click to expand...
Click to collapse
Wow, I really like that case (with the clear plastic front). Couple questions...
* I noticed it has a hole in the back for the camera, can you take pictures okay with the case on?
* Can you pull the keyboard out without problems with the case on?
* The case I have for my Toshiba e755 left a few scratch marks, did this one do the same to the blue angel?
* Any complaints about the case?
Thanks!
head to the bottom of this thread
http://forum.xda-developers.com/viewtopic.php?t=13842
Click to expand...
Click to collapse
Looks like there's a problem with the microphone hole.
There is a problem with the mic as in no hole at all. You either have to open the case to speak or drill a small hole as I have done to remedy the problem. I hope the mfg will correct this issue for others.

New plastic mask (case) for TyTN

I have MDA Vario II for a few month and don't want to buy the new kaiser now because I love my phone.Now i want to buy 3000mah battery and new screen protector but don't know is there any place on the web to buy new plastic case (mask) for my TyTN.It should be very nice if exist some catalog of Hermes masks.If somebody know where,how please to post!
I use ebay to buy those kind of stuff, its pretty cheap and reliable. Ebay do have some hard clear case. Search under clear case for your model.
...could i ask...u've got one?
i've got a clear case of ebay. from a hong kong retailer, valueshophk. paid £5 ($2.50) delivered, been using it for about 6 weeks now and its really good.
it does yes add a bit a bulk to the phone, but it isnt too bad, and when you put the case on it isnt the best fitting, but after a day in your pocket it beds in and the fit is good. as it is solid it does side around like crazy if you leave it ona car seat or something
for the money its great value and it does a good job of protecting the phone.
Marvelous~
and...could i have the shop's URL ?
could i know the transporting fee for this, ie.From HK to your country?
ss1271 said:
Marvelous~
and...could i have the shop's URL ?
could i know the transporting fee for this, ie.From HK to your country?
Click to expand...
Click to collapse
You can do a search for it on www.ebay.com. It will provide venders, shipping costs, etc....
galaxys said:
You can do a search for it on www.ebay.com. It will provide venders, shipping costs, etc....
Click to expand...
Click to collapse
Ebay does have some really good stuff. Just try avoiding the "rubber" cases, sometimes they will come in too flimsy to even work or fit your phone.
I would recommend the rubberized plastic case b/c the regular plastic case will crack easily in your pants pocket.

T-mobile TP2 GEL case not shipping worldwide.... (T_T)

Hi all!
I'm owned T-mobile TP2 BUT I'm in Australia!
So it's really hard to find good accessories around here ... but that's OK cuz
I already got the Bodyguardz. But now I really want to get this case
from eBay. But the seller won't ship to Australia.
Do you guys know any other websites or sellers who willing to ship out to
Australia?
Another thing, Is this case good? Some say it's a bit loose. So is it worth
my effort to find one?
Thanks
I have a T-mobile Touch Pro 2 and I bought that case for it, And I love it!
Fits pretty well, not loose at all, and whats best of all it keeps the back panal from shakeing around! So For 12.99$ I recomend it.
Panzer Schreck said:
I have a T-mobile Touch Pro 2 and I bought that case for it, And I love it!
Fits pretty well, not loose at all, and whats best of all it keeps the back panal from shakeing around! So For 12.99$ I recomend it.
Click to expand...
Click to collapse
That's what I'm talking about! It's good, right mate?
But the seller insist that he's not going to ship to Australia
Anyone kind enough, could you please buy it and resell it to me on eBay?
Just PM me right away! ( lol~ )
I only need a 'First class mail' delivery service to Australia
So sad that no one on eBay offering that...
I guess I have to wait until the HK people came in play.
Cheers!
Is it possible to usethis gel case with the original TP2?? any chance of it fitting??
what150 said:
That's what I'm talking about! It's good, right mate?
But the seller insist that he's not going to ship to Australia
Anyone kind enough, could you please buy it and resell it to me on eBay?
Just PM me right away! ( lol~ )
I only need a 'First class mail' delivery service to Australia
So sad that no one on eBay offering that...
I guess I have to wait until the HK people came in play.
Cheers!
Click to expand...
Click to collapse
PM with you info, I will send you one, I have an extra. You can pay me via paypal.
Raychem said:
PM with you info, I will send you one, I have an extra. You can pay me via paypal.
Click to expand...
Click to collapse
Thanks mate! I already PM you.
looks good. panzer, you can slide open the keyboard right? any trouble tilting the screen?
Yes you can use the keybord, and no trobule with the tilt getting in the way of the top row of keys. The only reason why I didn't get the body glove case for this phone is because it was to close to the top row of keys too tilt to any degree. I highly recomend this case for the T-mo TP2!!
And for the peeps that have the euro TP2, They do make a gel case for it but how well it works I can coment on...
Gel Skin and Car Charger Value Pack
New on DayDeal.com, the T-Mobile HTC Touch Pro2 Gel Skin and Car charger package.
http://www.daydeal.com/product.php?productid=35973&cat=4469
DayDeal.com has lots of T-Mobile TP2 friendly accessories.
highdragon5886 said:
New on DayDeal.com, the T-Mobile HTC Touch Pro2 Gel Skin and Car charger package.
http://www.daydeal.com/product.php?productid=35973&cat=4469
DayDeal.com has lots of T-Mobile TP2 friendly accessories.
Click to expand...
Click to collapse
Thank you, mate! Nice find here!
I'll definitely going to check it out.
Any body has a coupon code for DayDeal ???
Cheers!
I picked up this case from a t-mo store and am not happy with it. It looks just like some generic type you would get off of ebay. The cover is abit warped as well. For this nice of a phone I would rather have something decent looking.
fyi it cost 14 bucks so I guess you get what you pay for. Will be returning it.
Merge threads
Here another point of view from the same case:
http://forum.xda-developers.com/showthread.php?t=524059&page=9
im loving this case works great for me
I got this case from the same seller, oemcell. I am very happy with it. At first I didn't like it due to the added bulk, but after a day or so i got used to it. I chose it out of the others because it does not cover the zoom bar. Does a good job protecting the device without hindering use.
Once my invisibleshield arrives then it will be complete hehe
I have this gel case and love it, dropped my phone twice and it saved it. Just wondering anyone who is using this gel case also uses a belt case with this. I want a leather case but with the added mm to the TP2, leather cases for our phones will be too tight or cant fit. Any suggestions, looking at dimensions at other phones cases or just going to a shop and trying all thier cases?

BlackBerry DTEK50 cases for Idol4

Have anybody tried fitting a BlackBerry DTEK50 case onto our Idol4? I know they're basically the same phones but I am not 100% sure, and I don't want to spend money on something that may not even fit. There are no good cases for Idol4 here in Poland, so that would be my last hope :crying:
Lukaszeue said:
Have anybody tried fitting a BlackBerry DTEK50 case onto our Idol4? I know they're basically the same phones but I am not 100% sure, and I don't want to spend money on something that may not even fit. There are no good cases for Idol4 here in Poland, so that would be my last hope :crying:
Click to expand...
Click to collapse
I found 2 really amazing cases on eBay... Military grade material and drop tested.. shock proof. Tempered glass screens included. Under 20 bucks.. and also another technically designed clear case with lining of rubber strips in delicate spots.. only 9 bucks.. I'm ordering this black and orange one here: http://www.ebay.com/itm/232241803876
Sent From XDA Developers App|•6055U•|
-KiD
Unfortunately, the shipping cost to Poland would be twice the price of the case, so that's a no-no for me :/ I've ordered an NGP Incipio case for Blackberry DTEK50, we'll see if it fits. I'll update once I get it, in case someone would want to do the same.
Update:
OK, it came today and everything fits perfectly so if anyone is hesitating whether to buy one or not, you're free to go Just keep in mind I'm talking only about the previously mentioned case, and I have no idea if any other one fits.

Categories

Resources