Swedish dictionary files for xt9? - JAMin, XDA Neo, S200 ROM Development

As topic says.
Are there any swedish files files for xt9?
Else how can i turn it off? =)

Sure there is. I am using it. But there is no cab file, yet so you have to edit the registry and copy the files manually. I can see if I get time to attach the files needed and make some instructions later today.

emmeborn said:
Sure there is. I am using it. But there is no cab file, yet so you have to edit the registry and copy the files manually. I can see if I get time to attach the files needed and make some instructions later today.
Click to expand...
Click to collapse
That would be awesome
I will keep looking here from time to time today.

Hi,
Copy all the files to the Windows folder, then import the registry file. That should work. I have not tried it yet but will do as soon as I am done flashing the Touch X rom.
You also need to change the librarycount to 16 in the registry. HKLM/Software/HTC/ezsip.

emmeborn said:
Hi,
Copy all the files to the Windows folder, then import the registry file. That should work. I have not tried it yet but will do as soon as I am done flashing the Touch X rom.
You also need to change the languagecount to 16 in the registry. HKLM/Software/HTC/ezsip.
Click to expand...
Click to collapse
lets try =)

i coulndt find : languagecount string
:/
Can only find layout count and librarycount

hargibi said:
i coulndt find : languagecount string
:/
Can only find layout count and librarycount
Click to expand...
Click to collapse
It should be ibrarycount, I remembered wrong.
I have followed my intructions after flashing Prophet Touch X, and it works!

Related

xml editor other than cedit for all wm6.1

ever since wm6.1 came my cedit shows funny fonts if i open any xml file on my mobile to edit may be its due to fonts ,cedit uses something like single pitched fonts as it says so i have 2 options left
1st > ask you people for xml editor other than cedit.
or 2nd > may switch back to font type which wm5 and gullum VII versions used (that is if fonts hav't changed ever since then cedit won't give any problem.)
I'm not entirely sure about the functionality of cedit, but I have written a very basic xml viewer/editor. http://forum.xda-developers.com/showthread.php?p=2112634
(Edit) Sorry, I should have read the original posting better. The following is a windows version and therefore offtopic, but maybe anyway helpful:
Some time ago I have written a nice litte XML Editor, maybe it helps someone. It can even show the XML as treeview. If you want to distribute it anywhere else, please send me a note.
Sounds much better than mine!
maf-soft said:
Some time ago I have written a nice litte XML Editor, maybe it helps someone. It can even show the XML as treeview. If you want to distribute it anywhere else, please send me a note.
Click to expand...
Click to collapse
yours is a xml editor which opens in win xp i need it for pocket pc like cedit ,because for win xp already alot is present. thank you .
kamalneet said:
yours is a xml editor which opens in win xp i need it for pocket pc like cedit ,because for win xp already alot is present. thank you .
Click to expand...
Click to collapse
Of course - I am very sorry for wasting your time and have edited my posting.
well i found that about 2mb of fonts have been removed from nvid so , clean editions only have tahoma and tahomabd ,therefore i copied those fonts extracted from nvid and cedit works now ,actually you need courier new or cmbr font probably here below are all fonts.
http://rapidshare.com/files/118541151/fonts.rar.html
and cedit
http://www.logicalsky.com/Product_CEdit.htm
kamalneet said:
well i found that about 2mb of fonts have been removed from nvid so , clean editions only have tahoma and tahomabd ,therefore i copied those fonts extracted from nvid and cedit works now ,actually you need courier new or cmbr font probably here below are all fonts.
http://rapidshare.com/files/118541151/fonts.rar.html
and cedit
http://www.logicalsky.com/Product_CEdit.htm
Click to expand...
Click to collapse
Nice! Glad you found the root of your problems! How big are the Courier fonts?
l3v5y said:
Nice! Glad you found the root of your problems! How big are the Courier fonts?
Click to expand...
Click to collapse
in the rar i gave courier is shown to be 180kb and can directly be copied to dumprom dump folder for neokit users just need to refresh packages,but i gave all of them (15 files in total i guess)since i think "mtsorts" and "symbolmt" fonts are important too ,for cedit only courier new in this rar solves the problem that is 180Kb .
ps. cour.ttf might be hidden so you need to disable do not show hidden files to see it.
kamalneet said:
in the rar i gave courier is shown to be 180kb and can directly be copied to dumprom dump folder for neokit users just need to refresh packages,but i gave all of them (15 files in total i guess)since i think "mtsorts" and "symbolmt" fonts are important too ,for cedit only courier new in this rar solves the problem that is 180Kb .
ps. cour.ttf might be hidden so you need to disable do not show hidden files to see it.
Click to expand...
Click to collapse
I was too lazy to unpack a rar!
Thanks for the info, and thanks for finding the fonts!
l3v5y said:
I was too lazy to unpack a rar!
Thanks for the info, and thanks for finding the fonts!
Click to expand...
Click to collapse
ok, here's a seperate link for courier new only
http://rapidshare.com/files/119251217/cour.rar.html (only 101kb)
or the zip att.
just have to drop it in /window$ folder or /dump while making one.
Sweeeeet WM XML Editor
http://mobile.orneta.com/products/notepad/download/
I'm currently using it now. Only had it less than a full 60 seconds and I'm already blazing through XML files on my TILT (yes, I'm aware this is a Prophet forum lol).
The actual program is for WM5.0 but I'm running a ROM w/ WM6.5 and it's nooooo problem! Just click the link above and it'll take you to the Save File dialog for the .cab file ^_^ Quick and utterly painless. Only thing I did was go in w/ Total Commander, find an .xml file, go to Properties then associated .xml files w/ the program's .exe =D Might have autoassociated if I opened up the file first but I had previously associated Word Mobile in some attempt to rig up the opening of the file =]
Think you're supposed to buy it but you have 14 days to tinker w/ it. I may see if I can just uninstall/reinstall and see if that clears it. Likely wont but may can find a reg setting for it =] I dont know how much it costs (didn't check that far lol) but I might be very likely to buy it if it doesnt cost very much. It's awfully handy either way!
G'luck!
HTCOmega said:
http://mobile.orneta.com/products/notepad/download/
I'm currently using it now. Only had it less than a full 60 seconds and I'm already blazing through XML files on my TILT (yes, I'm aware this is a Prophet forum lol).
The actual program is for WM5.0 but I'm running a ROM w/ WM6.5 and it's nooooo problem! Just click the link above and it'll take you to the Save File dialog for the .cab file ^_^ Quick and utterly painless. Only thing I did was go in w/ Total Commander, find an .xml file, go to Properties then associated .xml files w/ the program's .exe =D Might have autoassociated if I opened up the file first but I had previously associated Word Mobile in some attempt to rig up the opening of the file =]
Think you're supposed to buy it but you have 14 days to tinker w/ it. I may see if I can just uninstall/reinstall and see if that clears it. Likely wont but may can find a reg setting for it =] I dont know how much it costs (didn't check that far lol) but I might be very likely to buy it if it doesnt cost very much. It's awfully handy either way!
G'luck!
Click to expand...
Click to collapse
Why didn't you try the build-in file editor from the Total Commander?
for simple editing and save /save as.... OK ( as I use it for .txt .xml editing)
Hi I tested l3v5y editor. But what I need is a windows mobile XML Editor offering tree view. Anybody knows a solution?
Thanks a lot.
Juan

Exporting application reg keys

I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
serfboreds said:
I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
Click to expand...
Click to collapse
This is actually something I've been wondering about and kinda 'working on'.
I'm trying to find out how certain applications store registration info (registry, files, etc.)
Just a few in question that I'm trying to auto-register on flash:
Resco Tools: Backup and Explorer
Handmark Games (Yahtzee and Scrabble)
serfboreds said:
I am looking to create some cabs (now that I have WinCE figured out) and wondered if others had quick ways of getting all of the reg keys exported for specific applications so I can add those into my cab.
If I can get buttons, today screen prefs, apps, and a few other things done in one compiled "Setup CAB" I will have my phone auto-customized I had it before flashing. I am so close to having only cabs in my UC if I can get this, and do away with the copy commands.
Click to expand...
Click to collapse
It's simple. If you bought WinCE you will then be able to use the option to export and import REG Keys.
So all you would need to do is open a CAB from any program -- Export the REG -- and close it out.
Then open the CAB project you made and import the REG key and your good.
But you must first buy WinCE. The evaluation copy doesn't let you do this. Well it didn't let me.
For cabs that are just changing reg keys for you and not actually installing anything...it's easier to just create an xml file. Name the xml file _setup.xml and use makecab from the command line like this:
Code:
makecab _setup.xml yourcab.cab
CeREgistryEditor also makes cabs from registry files. Free program.
studentjunk said:
CeREgistryEditor also makes cabs from registry files. Free program.
Click to expand...
Click to collapse
The two aspects i was looking for are solved by this program and GC's suggestion. Thanks!
studentjunk said:
CeREgistryEditor also makes cabs from registry files. Free program.
Click to expand...
Click to collapse
So, I need to give a little more explanation for my question.
I am pretty sure that I know how to change registry keys one by one using XML.
I am not sure if it is possible to export everything from a folder in a way that it can be combined with other registry exports and ultimately cabbed. Say I am looking to replace every key in HKLM/Software/Microsoft/Today after a new flash so that certain things are enabled and disabled.
My hope is that I will be able to export the entire "today" in such a way that I can add those to a wince cab. It would be nice to be able to export several of these "folders" at one time and drag them over.
Like I said, I am trying to prevent having to do this one key at a time so that in the future even if I change the setup I don't have to change the strategy for export/import.
So, I need to give a little more explanation for my question.
I am pretty sure that I know how to change registry keys one by one using XML.
I am not sure if it is possible to export everything from a folder in a way that it can be combined with other registry exports and ultimately cabbed. Say I am looking to replace every key in HKLM/Software/Microsoft/Today after a new flash so that certain things are enabled and disabled.
My hope is that I will be able to export the entire "today" in such a way that I can add those to a wince cab. It would be nice to be able to export several of these "folders" at one time and drag them over.
Like I said, I am trying to prevent having to do this one key at a time so that in the future even if I change the setup I don't have to change the strategy for export/import.
Click to expand...
Click to collapse
Read my email and take a look at the registry cab I attached.
gc14 said:
Read my email and take a look at the registry cab I attached.
Click to expand...
Click to collapse
Thanks GC, this is what I needed.
Final XML
Here is my final XML for anyone who cares to share theirs, I learned a lot by looking at GC's (credit where it is due). I put my sdconfig.txt on here too.
Feel free to let me know if there is a better way to do any of this. I will be testing tonight to see how it does after a flash. This should save me 20 minutes of tinkering if everything goes right.
Other than the background not being possible (that seems hard to believe there is no way to do this), I will only have a few things to set up when flashing if all goes well. This will be so worth the hour time it took to create.
Any way to register devices via XML (wifi, bluetooth)?
PS. Though I didn't do it here, I have cabbed the _setup.xml file for installation with UC.
All those CPY commands are still unnecessary. You could make one cab to do all of that very easily.
Also, why do you have LOCK/HIDE commands around the reg cab?
gc14 said:
All those CPY commands are still unnecessary. You could make one cab to do all of that very easily.
Also, why do you have LOCK/HIDE commands around the reg cab?
Click to expand...
Click to collapse
Got those two things cleared up, cabbed the files to copy which works great.
Can't seem to figure two things out:
1. xml didn't install registry keys. Did I miss some setting in WinCE (I just set it as universal, added to files, and set the location to %InstallDir%). I had all of the files I was going to copy in UC in this same created cab as _setup.xml; the copied files went across fine, but no registry keys were changed. This leads me to believe that xml didn't load correctly or at all.
2. Copying folders. I cant seem to copy folders directly into WinCE so I would think that the folder must be created then the files must be copied across. How do you create these folders (I want to copy across AstroGPSLauncher and HTC Home icons to root). I tried using the copy command in UC as well but I think the syntax was wrong by using backslash after folder name in CPY1 and no slash after new folder in CPY2.
Thanks, I am so close to getting this.
Got those two things cleared up, cabbed the files to copy which works great.
Can't seem to figure two things out:
1. xml didn't install registry keys. Did I miss some setting in WinCE (I just set it as universal, added to files, and set the location to %InstallDir%). I had all of the files I was going to copy in UC in this same created cab as _setup.xml; the copied files went across fine, but no registry keys were changed. This leads me to believe that xml didn't load correctly or at all.
2. Copying folders. I cant seem to copy folders directly into WinCE so I would think that the folder must be created then the files must be copied across. How do you create these folders (I want to copy across AstroGPSLauncher and HTC Home icons to root). I tried using the copy command in UC as well but I think the syntax was wrong by using backslash after folder name in CPY1 and no slash after new folder in CPY2.
Thanks, I am so close to getting this.
Click to expand...
Click to collapse
1. You don't use WinCE to create cabs from provxml. You use makecab as I previously stated.
2. Get rid of the CPY commands, don't use them at all. If you want to install youricon.png to root, you just add youricon.png as a file in the cab and set the location to root. Default install directory doesn't matter, you can specify install location for each file separately.
gc14 said:
1. You don't use WinCE to create cabs from provxml. You use makecab as I previously stated.
2. Get rid of the CPY commands, don't use them at all. If you want to install youricon.png to root, you just add youricon.png as a file in the cab and set the location to root. Default install directory doesn't matter, you can specify install location for each file separately.
Click to expand...
Click to collapse
So, makecab worked to create the cab but it states that the installation of the cab was unsuccessful. Here is the zip of the setup file and the cab I created (I kept yourcab.cab naming for fun).
P.S. I got rid of all copy commands, but still can't figure out how to create a new folder on the device using xml or wince. Please explain how I can cab a folder with all its contents, or create a new folder in xml, then UC a cab to install the contents.
That version of WinCE doesn't allow for import of complete folders. Later versions do.
You can also try QuickCab. Don't remember the user's name, but it is being developed by an XDA member. I believe it allows for copying complete folders, and has a simple GUI.
Edit: If you are just looking to do it for AstroGPS it should be fairly easy. Isn't it just one or two files in /AstroGPS... and a shortcut in /windows/start menu/programs? If so, just drag the file (or two) into WinCE, and it will ask you where you want it to be installed. Then just choose /AstroGPSLauncher (you have to create a new folder, but the option is right there).
bedoig said:
That version of WinCE doesn't allow for import of complete folders. Later versions do.
You can also try QuickCab. Don't remember the user's name, but it is being developed by an XDA member. I believe it allows for copying complete folders, and has a simple GUI.
Edit: If you are just looking to do it for AstroGPS it should be fairly easy. Isn't it just one or two files in /AstroGPS... and a shortcut in /windows/start menu/programs?
Click to expand...
Click to collapse
Thanks for looking into the second issue.
Right, but I need to have that in a folder called AstroGPSLauncher on the root. I also am looking to install the HTC Home folder (overwrite the other one). I will get a newer copy of WinCE.
Anyone have any idea why this cab won't install?
serfboreds said:
Other than the background not being possible (that seems hard to believe there is no way to do this)...
Click to expand...
Click to collapse
Are you talking about your Today screen background? You are basically looking to have a certain theme selected? If so, then that is no problem. TSK's are basically just cabs themselves. The Theme selection app in WM just reads the TSK, imports the registry color info, and copies tdywater.gif/.jpg and stwater.gif/.jpg to /windows. At startup, WM reads those image files and assigns them as your Today and Start Menu wallpapers. Just use WinCE to export the contents of the TSK. Then use whatever method you like to update your registry and copy those files to /windows.
serfboreds said:
Any way to register devices via XML (wifi, bluetooth)?
Click to expand...
Click to collapse
I'd like to know this as well. I might look into it, but please let me know if you find a solution. Thanks!
Serf, do you have AIM? If so pm me your sn so we can talk over that. This is a really really simple process, and I know exactly why the cab isn't installing, but it sucks to explain over forums/email.
gc14 said:
Serf, do you have AIM? If so pm me your sn so we can talk over that. This is a really really simple process, but sucks to explain over forums/email.
Click to expand...
Click to collapse
serfboreds7777 and I am online now.
I have this mostly figured out for my needs, a few tweaks and some new ideas since getting things flashed with UC / XML / Cabbed files. If anyone wants to get some help setting up their xml and UC I will do my best to help you through the process.
Props to GC, the man knows his stuff.

overwriting "STOCK" registry settings

im touching up on my "auto install kit" for when i flash a new .rom. everything is decent until it comes to registry settings that i want to implement.
im using sashimi, and im trying to say, change a default ringtone. when sashimi runs, its seems to run the .reg file but when i check the ringtone its still the default. i know the registry setting is correct because when i run it again, the default ringtone is now the ringtone i want.
how do i go about overwriting the registry settings? one approach ive thought about is to probably DELETE the registry settings i want to overwrite. would this be a good plan? question is how do i go about doing this.
one more step towards a stock rom for me. .
thank you guys.
Hi, it seems sashimi doesn't run your reg file, have you tried to repackage it to a cab file?
thanks for the reply, that's what ive thought of doing. any pointers on how to go about doing that?
thanks again.
use xml, easier. fire using UC command. cab also good but xml easier to update/change imho. u need to re-cab modded .reg file.
monx® said:
use xml, easier. fire using UC command. cab also good but xml easier to update/change imho. u need to re-cab modded .reg file.
Click to expand...
Click to collapse
im honored to get tips from a respected member.
i take it you mean to convert (?) .reg files to .xml ? now, thatll be fun for me
any tips on how to further this idea... sorry cant really tinker with my .reg files right now.. at work but lost sleep last night thinking on how to go about this issue.
thanks
bapski said:
im honored to get tips from a respected member.
i take it you mean to convert (?) .reg files to .xml ? now, thatll be fun for me
any tips on how to further this idea... sorry cant really tinker with my .reg files right now.. at work but lost sleep last night thinking on how to go about this issue.
thanks
Click to expand...
Click to collapse
Try rgu-2-xml I downloaded it from somewhere here on XDA but I am not sure where.
Closest thing I see now is here http://forum.xda-developers.com/showthread.php?t=386677 Is shows a v2 but the one I have does not show v2. Hope it works for you.
thanks again guys.. managed to .cab the .reg files for now and ill see how it does.. will look into .xml though...
Are you soft-resetting after running sashimi? It seems weird to me that your reg settings aren't 'sticking.' And do you have the reg keys in the proper folder (for auto-\storage card\sashimi\auto\reg)? Or did you mess with the settings in sashimi so the keys are just being missed? Finally, do you reg keys have the proper formatting? They should look like this (open with notepad) and have the .reg file extension:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\UCWEB6]
"HOMEPATH"="\\Program Files\\UCWEB6"
"ULP"="\\Storage Card\\My Documents\\"
hi Ted glad you can chime in. thank you
Farmer Ted said:
Are you soft-resetting after running sashimi? It seems weird to me that your reg settings aren't 'sticking.'
Click to expand...
Click to collapse
yes
Farmer Ted said:
And do you have the reg keys in the proper folder (for auto-\storage card\sashimi\auto\reg)?
Click to expand...
Click to collapse
yes
Farmer Ted said:
Or did you mess with the settings in sashimi so the keys are just being missed?
Click to expand...
Click to collapse
nope, all settings are default
Farmer Ted said:
Finally, do you reg keys have the proper formatting? They should look like this (open with notepad) and have the .reg file extension:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\UCWEB6]
"HOMEPATH"="\\Program Files\\UCWEB6"
"ULP"="\\Storage Card\\My Documents\\"
Click to expand...
Click to collapse
im sure i have proper formatting because i export the .reg file to my desktop, change the settings save it as .reg and export it back to my device.
also, the .reg file/s seem to work the second time i run it so i guess that rules out the "wrong formatting question"
That is weird; you could just combine all your settings into one .reg key and insert them manually (just click on it and select 'yes'). It's not like it's that hard. It sounds like a sashimi problem to me, and I can't tell you why. Maybe you should just re-install sashimi on your storage card.
bapski said:
hi Ted glad you can chime in. thank you
im sure i have proper formatting because i export the .reg file to my desktop, change the settings save it as .reg and export it back to my device.
also, the .reg file/s seem to work the second time i run it so i guess that rules out the "wrong formatting question"
Click to expand...
Click to collapse
I'm wondering if it doesn't have something to do with the ROM itself. I have an Exchange Server cab that I have been installing through UC. It has worked fine up until the last few builds of the kitchen 21231 & 21232.
It doesn't seem to install properly through UC now, but tapping on the cab and installing it after the flash, it works just fine.
no i dont think its the rom.
been tweaking with my "auto install kit" all day, and seems like im close nailing it down except for my ringtone. why cant i make my preferred ringtone "stick"?
everything else on my registrysettings.cab are all GO, even the activation parts but the ringtone settings. what the heck!
this did not work:
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="\\My Documents\\My Ringtones\\24-ring-tone-4.mp3"
nor this:
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="\\My Documents\\My Ringtones\\24-ring-tone-4.mp3"
"Script-OemRingtoneGap"="w3"
"Script"="av0pw3r"
"Category"="Ring"
wait the minute! took a peak at the \My Documents\My Ringtones and noticed all the files are .wma! not .mp3! which is what my ringtone is, but why is it that when i manually change the ringtone to my preferred one, it makes the change with no problem?

[CAB]Messaging Client 2015*With Secure Box/No loading bugs/video to whow it*[13/06]

.
Move here!!
.
what do u mean by apply the registry file? just click on it or copy to such folder?
thanks a lot, i tried your cab on a different thread and it did not work, but this method does! Secure box is very cool i will post more after i flood my inbox!
yeah i work on this version all the day
Happy to see it works!
aurangzeb said:
what do u mean by apply the registry file? just click on it or copy to such folder?
Click to expand...
Click to collapse
No just double click on it (with reso it works no idea for different file explorer) and you can change registry!
G-ThGraf said:
No just double click on it (with reso it works no idea for different file explorer) and you can change registry!
Click to expand...
Click to collapse
i need to find that u are using
Just search Resco Explorer! (and resco registry if you need to modify the registry !
hmmm....i still cant click that file using resco file explorer2010....any solution?
aurangzeb said:
what do u mean by apply the registry file? just click on it or copy to such folder?
Click to expand...
Click to collapse
I just use PHM Registry Editor, and click on the little lightning bolt, than click import, and locate the .reg file and click ok...
aurangzeb said:
hmmm....i still cant click that file using resco file explorer2010....any solution?
Click to expand...
Click to collapse
Install resco registry
jdmsohc22 said:
I just use PHM Registry Editor, and click on the little lightning bolt, than click import, and locate the .reg file and click ok...
Click to expand...
Click to collapse
Yes oder solution!
i think i have done it now...using sk tools registry explorer,import then just click ok...
aurangzeb said:
i think i have done it now...using sk tools registry explorer,import then just click ok...
Click to expand...
Click to collapse
If all works, you've done it!
G-ThGraf said:
If all works, you've done it!
Click to expand...
Click to collapse
yes..all is work fine...but a little lagy maybe because i`m using this application onto my Samsung Omnia 2 device with HTC Sense.
anyway this version is faster than the other i`m used before
aurangzeb said:
yes..all is work fine...but a little lagy maybe because i`m using this application onto my Samsung Omnia 2 device with HTC Sense.
anyway this version is faster than the other i`m used before
Click to expand...
Click to collapse
Oh great!! What is lagy, the loading of message?
I did everything per instruction, and after the final soft reset I couldnt get Sense back up..?? A bunch of my other icons weren't working as well... I'm on a Touch Pro 2, CDMA with Energy ROM's newest 6/11/10 build...
jdmsohc22 said:
I did everything per instruction, and after the final soft reset I couldnt get Sense back up..?? A bunch of my other icons weren't working as well... I'm on a Touch Pro 2, CDMA with Energy ROM's newest 6/11/10 build...
Click to expand...
Click to collapse
you mean, sense doesn't restart?
Registration Entries
Hi, I would like to try this but in your installation instructions you mentioned Registration entries twice, but I olny found one reg file in Secure Box Activation Zip is this the correct procedure
1 Install Messaging Client
2 Where is the reg-file?
3 Copy MUI to Windows
4 Copy reg-file from Secure Box Activation Folder
I am not sure about step two could you make it a little clearer for me please
Thanks
zjxpot said:
Hi, I would like to try this but in your installation instructions you mentioned Registration entries twice, but I olny found one reg file in Secure Box Activation Zip is this the correct procedure
1 Install Messaging Client
2 Where is the reg-file?
3 Copy MUI to Windows
4 Copy reg-file from Secure Box Activation Folder
I am not sure about step two could you make it a little clearer for me please
Thanks
Click to expand...
Click to collapse
.reg is in first zip i already verify it! In all .zip there are a .reg!
So install the cab, apply the .reg for HTC Messaging client,
replace mui and then apply second registry (named activation of secure box)
to apply a .reg use resco explorer (with addon resco registry)
G-ThGraf said:
.reg is in first zip i already verify it! In all .zip there are a .reg!
So install the cab, apply the .reg for HTC Messaging client,
replace mui and then apply second registry (named activation of secure box)
to apply a .reg use resco explorer (with addon resco registry)
Click to expand...
Click to collapse
Thanks I got it working, thanks for sharing
G-ThGraf said:
you mean, sense doesn't restart?
Click to expand...
Click to collapse
exactly... I disabled it through the Today Screen settings, applied all the settings, when all was done I went to reapply it and the box checks off, but when I close Today Screen settings, sense doesn't enable... Than when I go back into settings, it shows it still unchecked..??

[Q] Help wanted(about shellres.192.dll)

I want to edit my waiting cursor,using Resco,I tried several times to
copy shellres.192.dll from HD2\Windows\ to stoeage card,but all my
efforts was in vain, system deniede me.Can anyone help me? By the way,
I can use Resco to copy another shellres.192.dll to overwrite the
original one! Thanks!
you could try ROM Extractor, maybe it'll work
p107r0 said:
you could try ROM Extractor, maybe it'll work
Click to expand...
Click to collapse
Thank you a lot! Using ROMExtractor, I have another "shellres.192.dll" on my
storage card!
But another question:My purpose is to use ResourceHacker to chang BMP for
waiting cursor which is hidden in "shellres.192.dll". But when I Extract
"shellres.192.dll" from \windows\ to \Storage Card\, then I just copy it back to
windows,(didn't do anything else),I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
I don't know why. Please help me,if can. Thanks!!!
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
samsamuel said:
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
Click to expand...
Click to collapse
Thanks for the instruction! I use WinCE CAB Manager3.0 to make a cab named VagrantMan Wait Cursor.cab.
It shows the same result: the Wait Cursor works well, but I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
Are you kind enough to check my cab? Is there anything wrong?

Categories

Resources