hello again.
i dont really remember if atom exec had the same issue with WM5.....
now i have jiggs latest rom
and i noticed that when a friend makes me a very short term call the number doesnt show up instantly......so if the caller hangs out too early the number of the missed call is shown as ''Uknown''
p.s. let me explain what i mean short call......here in greece when we want to just notify someone that we are thinking of him/her we just ring his phone once and then hung the line.
or in other occasions when we are going to meet each other at a certain place certain time we make that type of call to notify we are there
is there any solution to the problem?
Yup, same here. Unknown for the few seconds and the real caller no will display afterward. If we using call filter such as CallFirewall and we put some contact to be filter, the caller still get through due to it only filter the first display 'unknown' not the no. we assigned in the list.
bump.
if now there is no solution can i at least hope that jiggs and other rom cookers will try and search a bit about the problem?
thnx in advance fellas
I have the same issue with my Atom as well. Original WM5.
yeah, me too with original wm5
it's annoying
Dummpp....
there is an OLLLd solution for that! And works just great.
It is called: SMSDrFix
(there is a wm5 version that also works flalessly on a wm6 device)
Just install it, configure it (it is a program), reset the device and youre done!
cheers
Where can we find it...please help
Here it goes chap..
But I think this solves something else.. like when you send a SMS and you receive delivery report. Then it shows only the mobile number in the report. what it does is pick up the name of the person from the address book and show the name instead of the mobile number.
So I am not sure if it works for short missed calls or not. for short missed calls ATOM can't sense the mobile number for some reason. That's why shows unknown..
Anyway... have fun...
Regards,
Related
Can anyone explain why when I recieve incoming calls, my XDA doesn't match numbers to contacts and displays names instead of just a number?
I believe that you need to ensure you are running the latest ROM & Radio Stack.
Also your contacts must be prefixed with +44 so it can do a full number match.
My contacts were all prefixed with +44..number
But when I dialed a contact, it would not dial. Once I removed the +44 it worked.
So the question is how can it display a contact name when I have taken away this prefix?
Primed
Hi guys,
One other odd thing I have noticed is that if you put a - in the number, i.e 07801-12345 it does not always match the caller and says it is unknown number.
Does any one have any ideas?
I am running the XDA Dev Rom.
Thanks, Gil.
i've noticed that sms complete there names when i put the country code and everything in the contact and incomeing calls complete when i have only the area code and the phone number. this is realy anoying
Try this patch from Paragon Software http://www.penreader.com/PocketPC/SMS_Name.html
which fixes all SMS2Name confilcts ... and voice calls (if the caller uses their mobile number).
But, there seems to be varying degrees of success downloading this patch.
If you cannot download the patch, let me know I have the original source code..which works great.
PS: Upgrade to PPC 2003 which has this fix built in ! :shock:
in what format will everything need to be in to work with this new tool?
as i think that that fancy nice looking dialer program that comes in the dev's rom needs them without country code.
When I get another incoming phone call I get a audible beep like I should , however the phone applet does not show the incoming caller number or anything, until I put the person I am talking to on hold. Then it shows up in the phone applet and then I have to press switch to talk to them. This sucks butt!!! Can anyone point me to a fix for this? I would be greatfull.
Thanks,
Mikee
i would like to know the same thing
Like any good XDA2 owner, I have messed about with loads of utility programs, only to un-install them when they proved a waste of time.
Somewhere along the line, I have messed up my Missed Calls utility. If I miss a call, the red LED flashes for a while, and a balloon with lines appears at the top of the screen, to the left of the O2 symbol. When I click that, there is no info in it.
I am sure that this used to show me the name/number of a missed call. Any ideas how I can get that facility back?
In phone sreen, you can press call history button to see the detail of missed call.
Missed Calls Details
Thanks for the reply.
Yes, I realise that the missed calls are logged in the telephone Call History page, but I was hoping the resurrect the facility to show the details on the desktop.
Has something gone wrong in the registry?
Surely in normal, you can see the caller's number there if you click on the balloon. Recently, I sometime also have problem with that, when I click on the balloon, the information board appears with one flash (no information displayed on that) then disappears immediately. I saw it after I install the spb Pocket plus 2.5. But after softreset, things will be OK. :shock:
Someone can help us?
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
mitcheloc said:
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
Click to expand...
Click to collapse
the ROM you are talking about isnt exploited to my knowledge... but it is old and i think 3DES has stopped supporting it...
you are also in the wrong Forum... you should have posted in Hermes Windows Mobile 6... download this ROM and try it...
Thanks for the fast reply. I'll switch over to that ROM. Something is definitely up with this ROM though.
Thanks again,
Mitchel
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
marinic said:
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
Click to expand...
Click to collapse
I think it is normal if you are calling someone with the call waiting feature enabled, we won't hear anything either engaged tone or ringing tone as our calls in waiting/queue mode. Only he/she will hear the beep sound stating that someone is calling.
Me too,
I'm come from Bangkok, Thailand and All Rom i ever install is at the same problem (WM5 Original, WM5 O2asia, WM6 Charteux last edition, WM6 Charteux current edition)
Problem is sometime calling, It just no any sound at all and keep showing "Dialing" and may be nothing happen (may be freeze or long wait) when press end key on screen or hangup button. But i don't sure about the reach is busy or cann't connect (Used to ask my friend that his call is busy when i'm calling, he told not) Sometime cann't reach the network, it could happen again, It's seem better when use WM6 (Can ending, not wait for long time)
Is it may be radio ROM?? Or Bug??
Thanks marinic to bringing the issue up.
All my friends using ATOM and me too is facing the problem from the very first ROM to till today the latest ROM of Jiggs.
All other devices show status Waiting while ATOM show status Dialing.
Is this a problem of DialPad or anything else.
Does anyone have any solution. Please inform....
Thanks guys for your responses.
For clarification to powerwoot, my experience so far with call waiting from other handsets like Nokia, Motorola, Sony-Ericsson is the display shows a message "Call Waiting..." and then ringing tone is played. So I come to know that other party is busy with some other conversation.
Hope I make you all understand the problem. For your information this feature worked perfectly in O2 XDA II mini with the official ROM.
Regards,
Marinic.
Bosses...
Why silent? is it very much tough for you guys? Can anybody explain the problem technically in more details??
Best regards.
yes
you are right i have the same problem
is there any way to have the user notified of the status of the party that you are calling?
ie/ if i make a call, and it will display "call waiting..." when i'm trying to reach someone on the other end...
I have a WM6 device. Thanks
This may help...
Hi,
Go to Start>Settings>Phone in Services tab set the settings for Call Waiting to Notify me.
I am not sure, but it may help cause I get status Busy... now at least.
its problem with all windows mobile....