I created a patch, which increase volume on this device.
WARNING:
You use this patch on your risk. I give no warranty to you.
You should make back up before installing it.
First patch increase volume rather safely (without sound distortion).
Second patch increase volume more aggressive, so you can harm your device (sound distortion sometimes).
Installation
Copy cab to your device and launch it.
Turn off and turn on sound. All.
Possible you need to install certificate.
Looks interesting, thanks.
I didnt realize you had to reboot to apply the patch, but after rebooting, I get a message saying either my phone is not a 6815, or the firmware is unsupported. I'm using the HP firmware released at the end of June.
Oops
zer0day said:
I didnt realize you had to reboot to apply the patch, but after rebooting, I get a message saying either my phone is not a 6815, or the firmware is unsupported. I'm using the HP firmware released at the end of June.
Click to expand...
Click to collapse
I was going to try... not anymore...
Please give some feed-back...
Probably, you have another ROM version.
Please upload here WaveDev.dll file.
(You can use my ROM Extractor for it. )
Also please post your model (6815, 6818, 6828) and ROM version.
Wavedev.dll
Hi,
the are my Wavedev.dll, rw6815 iTA ROM, 1.012, BL 1.00.5
Thank you for fix!
New fix on volume tuning?
I just read the topic for volume tuning of my HP 6815, for me also was the case that my rom was allready updated to the newest version of june/july 2007. Via this way i would like to asak the programmer if there is allready a version that's working on the new bios update.
I hope some one can help me, with this one.
Greetz,
Hans
Volume Patch
I have last WM5 ROM from HP too and have same problem , can somebody help us with volume fix . Thx Knight
Must I do anything special to activate this, or do I just have to reboot ? Is this only for the 2 stereo speakers on the front, or does this boost the volume on the build-in earpiece when talking on the phone as well ? I installed it, and rebooted my rw6815, got a popup regarding the software, but I don't seem to note any difference when making calls. I installed "HP6815AudioTuning1.CAB"
Hi,
any one cofirm if work ?
i have rw6815 ROM 07/07/25 1.0
ROM Version 1.12.00 FRA
bootloader 1.0.5
OS Version 5.1
Thanks
Here my Wavedev attached.
md5sum f9367e5fb06b60218e7a3736a00468ae
Thanks.
I confirm, is not work
after rebooting, I get a message saying either my phone is not a 6815 or the firmware is unsupported. i remove patch from add/delete program, and the message gone (after rebooting).
please, please, any patch for my rom version ?
Thanks.
How do I uninstall ?
jazenf said:
How do I uninstall ?
Click to expand...
Click to collapse
from add/remove program, like removing software
I checked, it's not there, but I found another way to uninstall.
Thanks for the reply
Have you any solution for tuning volume of this phone ?
Thanks.
Hi. please me DLL fix.
HP Ipaq rw6815
ROM Version 1.12.00 WWE
bootloader 1.0.1
OS Version 5.1
Related
Hi
Have merged my xdaII rom and upgraded it to an xda2s rom and it works fine. The only anoying this is every time I reload some of my software from extended rom it says its not compatable with this operating system. does anyone know how to turn this of please
thanks
popeyesfx said:
Hi
Have merged my xdaII rom and upgraded it to an xda2s rom and it works fine. The only anoying this is every time I reload some of my software from extended rom it says its not compatable with this operating system. does anyone know how to turn this of please
thanks
Click to expand...
Click to collapse
its appears only once after installation of programs...now what you have to do is to edit the cabs or the installer using the winCE CAB Manager (search here) and change the CABs Operating System to higher version...
Thanks for the info will try that out
I need a link to a good nk.nbf file because the files i use donot work for me....... i have an unlocked g4 hard spl/ipl 2.21.0001/2.21.olip...... i also i'm running on Mun's_Ruu which the camera and voice command buttons do not work........... but other than that when i try 2 upload a new program like the TNT for wizard... my image version is 1.2.0.0 and rom image that i'm trying to upload to is 3.0. after my phone enters the bootloader mode no downloading occurs and it says that i need a newer utility update......... does anyone know what is wrong and how to fix this problem???
Did you try to use the RUU equipped with ROM itself, not your own version?
the same problems occur........ it always say's that i need a newer update version no matter what file i use with it............ do you think that it is my computer?
I had the same problem. I was using Vista and the rom I was loading had a vista loader in it but it would not work. I use VMware so I loaded it in xp and still had the same problem. I used the loader from another ROM and it worked fine, so not sure why the TNT loader would not work.
Windows 8.0 phone - Good wireless connection; full battery; working Nokia and Microsoft accounts; enough empty space available; hard reset twice or more; correct time and date.
I do not receive any apps updates yet I always get an error message saying "We are currently unable to check for updates."
*first-time user of a windows phone
weird...
which version of software is on device? settings - about (version OS and firmware)
for easy check and flash latest official version of WP software you can use Nokia Software Recovery Tool, Windows 7 or 8.x is needed...
If you want to update to Preview for Developers WP8.1 version check here
dxdy said:
weird...
which version of software is on device? settings - about (version OS and firmware)
for easy check and flash latest official version of WP software you can use Nokia Software Recovery Tool, Windows 7 or 8.x is needed...
If you want to update to Preview for Developers WP8.1 version check here
Click to expand...
Click to collapse
thanks for replying
the version is OS 8.0.10211.204
firmware version 1232.5951.1249.1017
ahmedeissa said:
thanks for replying
the version is OS 8.0.10211.204
firmware version 1232.5951.1249.1017
Click to expand...
Click to collapse
is possible you have too old software and update server not recognize or give update for current phone version. you can use Nokia Software Recovery Tool to update to latest official WP8 version: 3051.40000.1349.0025 (this is latest official version of WP8.0 called "Black")... also dont forget to update Nokia system apps after software upgrade (you can use app SysApp Pusher from Store)
after if you want test version of WP8.1 via Preview for Developers, just use links from my previous post
thanks for replying. before i saw your reply i had already used Nokia Software Updater for Retail and i updated my phone's system
to firmware version: 3051.40000.1349.0002 and not 3051.40000.1349.0025 as you mentioned
and the software version is still OS 8.0 not 8.1 or other versions
when i connect to the software updater it tells me that there are no newer versions. it doesn't show the 8.1 version
8.1 not official released. You must activate Preview for Developers to install 8.1. Read my first post, there is link how to make this
Sent from my Lumia 920 using Tapatalk
dxdy said:
8.1 not official released. You must activate Preview for Developers to install 8.1. Read my first post, there is link how to make this
Sent from my Lumia 920 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply. Is the phone's hardware compatible with android? (jellybean)
also there's freedom.apk for android phones, is there something similar to it that would work with windows phones?
also as you may know there's "black market" for android phones that allows you to download applications for free. is there something like it for windows phones 8.0?
ahmedeissa said:
thanks for your reply. Is the phone's hardware compatible with android? (jellybean)
also there's freedom.apk for android phones, is there something similar to it that would work with windows phones?
also as you may know there's "black market" for android phones that allows you to download applications for free. is there something like it for windows phones 8.0?
Click to expand...
Click to collapse
you cant flash android on WP devices or use apk files... is impossible... and why to go switch from horse to donkey
also no way to use black market or any other market on WP. Why you think WP OS is most secure OS without one malware or virus? because no c*ap and bogus app like on android...
if you want app for free watch for promotional period of apps.. in 3 year i collect pay software worth more than $2000... just be patient and many good apps and games can get free or for cheap price...
just use app as
http://windowsphone.com/s?appId=890485c3-7c32-42e3-b906-61ea62caeaa3
http://windowsphone.com/s?appId=e09858f0-0cf7-4b33-b754-54dd121b3c5d
http://windowsphone.com/s?appId=286ba4a5-33c3-489a-a5a1-8675503aadca
P.S.
all topic about illegal/pirated stuff here on forum is forbidden, but only for info you can use max 10 pirated XAP files on developer unlocked phone (but you must pay $19/year to Microsoft for Developer unlock)...
Similar, but worse problem here.
dxdy said:
is possible you have too old software and update server not recognize or give update for current phone version. you can use Nokia Software Recovery Tool to update to latest official WP8 version: 3051.40000.1349.0025 (this is latest official version of WP8.0 called "Black")... also dont forget to update Nokia system apps after software upgrade (you can use app ... from Store)
after if you want test version of WP8.1 via Preview for Developers, just use links from my previous post
Click to expand...
Click to collapse
Hello. I have a similar problem, and as you stated I believe the OS version is so old that the server does not recognize it. So I have tried several of Nokia's apps, Software Updater for Retail, Care Suite and they do recognize the phone, the software and it immediately states there is an update ready. However, when it tries to put the phone in Flash Update mode, the phone does not boot and I get an error saying there was a problem. If I disconnect the phone, press volumen-down and on buttons I can reset it and Works fine, but I am unable to do an update.
Here are the details for the phone:
Lumia 920
Country Variant PR
OS Versión 8.0.10211.204
Firmware revisión number 1232.5957.1308.0002
Radio Software version 1.0.202093.3
Firmware Update Notifier 1.1.0.3
Silent Installer 1.5.0.0
Build ID 153556
Extras+Info App Versión 3.8.1.10
I really don't know what to do. My phone hasn't even received GDR2, much less 3 and for sure it probably won't receive 8.1. Any information on how I can manually place the phone in Flash Update mode so maybe the care suite Works??? I was able, through the care suite to put in in test mode, but not in flash update mode.
Thanks in advance. Posting in the Nokia forums was absolutely no help at all. Could it be that I am doing something wrong with the care suite??? I used instructions from several sites to try to use the care suite.
To delete.
anaheiim said:
What is error?
Click to expand...
Click to collapse
Hello Anaheiim.
When the software tries to make the Nokia go into Flash Update mode, the phone stays at the NOKIA logo after rebooting. After about a minute, the application on the PC, say for example the Multisoftware Updater cancels out. In the case of Multisoftware updater, the error says : product in UEFI mode did not appear.
I can reset my phone and I get back the normal operations, but it appeas it never goes into a mode that is needed to download the software, or I don't have a driver or something similar to talk to the phone from my PC when it goes into that mode.
To delete.
anaheiim said:
What is error?
Click to expand...
Click to collapse
Hello Anaheiim.
When the software tries to make the Nokia go into Flash Update mode, the phone stays at the NOKIA logo after rebooting. After about a minute, the application on the PC, say for example the Multisoftware Updater cancels out. In the case of Multisoftware updater, the error says : product in UEFI mode did not appear.
I can reset my phone and I get back the normal operations, but it appeas it never goes into a mode that is needed to download the software, or I don't have a driver or something similar to talk to the phone from my PC when it goes into that mode.
To delete.
anaheiim said:
And following this tutorial? He said what? http://forum.xda-developers.com/showthread.php?t=2515453
The difference here is that you must go into flash mode manually.
Click to expand...
Click to collapse
Thanks Anaheiim. I am downloading the files in the requisities section of that thread and will follow the steps carefully. On your response you state "you must go into flash mode manually". But I don't see that mentioned in the tutorial, am I missing something??? Is there somewhere I can find how to place a Lumia 920 in flash mode manually???
Thanks again, at least I see a possibility of this working now!!!
To delete.
anaheiim said:
In the link that I give you
Part:
Follow the tutorial
Click to expand...
Click to collapse
Will do Anaheiim, thanks!!! Will follow the tutorial exactly and let you know how it goes. Super helpful, thanks. After the install I will leave a donation. Again, thanks a lot I can't tell you how helpful it is to have people like you that have gone through all this!
Hello again Anaheiim, unfortunatelly it has been no luck with the method you posted. I downloaded all the components fine. I downloaded the firmware I needed. I am able to get to the point when I try to recover the phone. I turn it off, plug the USB cord (already connected to the PC) and press the volumen down-power keys at the same time until I get ONE quick vibration. I then click the retry button on the tool on the PC. It starts trying to update, the phone shows the NOKIA logo mid-screen, most of the time it reboots and it shows it again and then goes directly into the Windows Phone logo and then back in to the start menú. Otherwise it just sits at the Nokia Logo. Either way, the PC App after a few minutes tells me it can't recover. Usually no error. Tried several different USB ports. Sometimes on some ports I get this error: DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004415, Common USB DCM: No device found from the target USB port, last error code = 0x80070003. .
Exception..
But that's it. Doesn't ever go into Flash Update mode.
To delete.
Re Register the softpub.dll
Disable third party firewall if any
Automatically detect settings for a proxy server from your LAN
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
kozav100 said:
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
Click to expand...
Click to collapse
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Reply
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
stympy said:
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Click to expand...
Click to collapse
kozav100 said:
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
Click to expand...
Click to collapse
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Radiomodule
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
stympy said:
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
Click to expand...
Click to collapse
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Modem change
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
stympy said:
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
Click to expand...
Click to collapse
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Usb driver
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
stympy said:
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Click to expand...
Click to collapse
kozav100 said:
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
Click to expand...
Click to collapse
If its so urgent... try this one !
****, I am still stuck on with USB driver Installation.
The files you have provided, I have successfully downloaded them.
When I connect the device to my laptop, the PC sees the device and asks for a driver, I have installed these drivers you provided but my laptop does not recognize them as compatible drivers saying that device is not recognised, I am stuck and I think I can not move any further because of this
Zero results
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
kozav100 said:
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
Click to expand...
Click to collapse
Hi. The computer with windows installed recognize this piece of hardware for just a second in device manager. I have windows 7 installed and when i connect the phone some autorun starts with the driver. Your phone does that ?
Attempts for phone root with intention to change the modem
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
kozav100 said:
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
Click to expand...
Click to collapse
Hi. Lets try this trick :
1. Look on the internet for this app called 1 Mobile Market apk
2. Download and install.
3. There you will find alot of chinese app for rooting.
4. Install and try to root your phone.
5. If you succeed instal Mobileuncle Tool and flash TWRP recovery from there.
6. After this you can flash modems
7. Good luck.
8. Waiting for feedback.
Sent from my Lenovo P780
SUCCEEDED!!!
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
kozav100 said:
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
Click to expand...
Click to collapse
Hi. Yes you are right. Flash modem reboot see if works, if dont work reflash other so on and on and on.. When you flash new modem will overite the old modem.
Good Luck, and waiting for feedback.
Modem Firmware change success
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
kozav100 said:
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
Click to expand...
Click to collapse
Hi. You could try one more who i think is the same as v23. The modem from LiFe rom must do the job. I used both and have no problems.
Good Luck.
I will for sure try the firmware you have advised above.
Moreover, I proceed to receive an OTA Updates for the Android system, but taking into account the last issue with modem, understanding that it will not do any good only harm. What do you think about it ?
Regards,
kozav100
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.